微波作用下卤素交换氟化制备氟代苯甲醛及二苯甲酮类化合物

在微波作用下,采用高效催化剂体系,于中等极性非质子溶剂中经卤素交换氟化高效制备了系列含氟芳香醛(酮)类化合物,产品收率53·3%~92·6%,反应时间较常规加热最多可缩短80%以上。采用中等极性反应溶剂,还可突出表现出微波对反应促进的“非热效应”,从而大大拓宽了氟化反应溶剂的选择范围。     

季鏻盐型三相相转移催化剂的制备及其化学结构与相转移催化活性的关系

 使用两种 ω-氯代酰氯 (氯乙酰氯与氯丁酰氯) 对交联聚苯乙烯微球 (CPS) 进行 Friedel-Crafts 酰基化反应,使用 1,4-二氯甲氧基丁烷对 CPS 微球进行氯甲基化反应, 分别将可交换的氯引入 CPS 微球表面, 制备了化学改性的 CPS 微球. 然后使用三苯基膦对改性微球进行季鏻化反应, 制备了间隔臂 (spacer arm) 长度不同的三种季鏻 (QP) 盐型三相相转移催化剂 QP-CPS. 考察了主要反应条件对制备过程的影响, 并以氯化苄与乙酸钠合成乙酸苄酯的反应体系作为三相相转移催化的模型体系, 初步考察了 QP-CPS 的相转移催化活性,探索了催化剂结构与相转移催化活性的关系. 结果表明, 季鏻盐的化学稳定性较差,在制备过程中需控制反应时间与温度, 且宜选用极性较高的溶剂. 季鏻盐型三相相转移催化剂 QP-CPS 对乙酸苄酯的合成具有较高的催化活性, 在液-固-液之间可有效地实现反应物种乙酸根的转移. 与季铵盐 (QN) 型三相相转移催化剂 QN-CPS 相比, 季鏻盐型三相相转移催化剂 QP-CPS 具有更高的相转移催化活性. 间隔臂越长, QP-CPS 的相转移催化活性越高, QP-CPS 的亲水和亲油性能对相转移催化活性也有很大的影响.     

离子液体负载钌络合物的合成及其催化环烯烃开环易位聚合

设计合成了含离子液体的吡啶配体1,2-二甲基-3-乙氧基吡啶六氟磷酸盐咪唑离子液体,在丙酮∶石油醚=3∶1的混合溶剂制备了含咪唑的离子液体.该离子液体可以做配体与Grubbs第二代催化剂反应,制备离子液体负载的钌催化剂,利用(1H,13C,31P)-NMR、元素分析等方法对合成的化合物和催化剂进行表征,催化剂中与钌连接的苯亚甲基上氢(RuCH—Ph)的振动峰由原来第二代催化剂的δ=19.2移至δ=16.27,在δ=-143.3处只出现PF6-中磷的信号峰,PCy3的信号消失,表明PCy3已经被置换完全,得到了新的催化剂.通过ICP测定含吡啶配体的离子液体负载的催化剂在混合物中的含量为14wt%.该催化剂在丙酮、甲醇、咪唑类离子液体等极性溶剂中易于溶解,解决了Grubbs催化剂在离子液体中不溶解的问题,实现了在纯离子液体中均相ROMP反应.考察了催化剂对不同极性单体在离子液体[BMIm]BF4中的开环易位聚合反应,非极性的环辛烯、含有中等极性取代基的5-羟基环辛烯单体以及含强极性取代基的5-腈基-2-降冰片烯单体的转化率分别为96%、73%和51.7%.利用凝胶渗透色谱(GPC)测定了聚合物的分子量及分子量分布.     

水杨酸功能化聚苯乙烯的制备及其与铕(Ⅲ)离子配合物荧光特性研究

以氯甲基聚苯乙烯(CMPS)为出发物质,通过两步改性反应,相转移催化的酯化反应(乙醛酸钠为反应试剂)与均相的Schiff碱反应,制备了侧链键合水杨酸(ASA)配基的聚苯乙烯ASAPS,并使之与Eu(Ⅲ)离子配位螯合,制备了高分子-稀土配合物ASAPS-Eu(Ⅲ).重点研究了相转移催化的酯化反应,也初步考察了配合物ASAPS-Eu(Ⅲ)的发光性能.研究结果表明,在季铵盐相转移催化剂作用下,溶解于有机溶剂中的CMPS可有效地与水相中的乙醛酸钠发生酯化反应,形成醛基(AL)化改性的聚苯乙烯ALPS.相转移催化剂的结构与溶剂的极性对相转移催化反应有显著的影响;配合物ASAPS-Eu(Ⅲ)具有Eu(Ⅲ)的特征荧光发射,并产生显著的Antenna效应.     

手性离子液体研究进展

对近几年来手性离子液体的研究进展进行了全面综述,这些手性离子液体包括咪唑鎓盐、季铵盐、噁唑啉盐、噻唑啉盐、吡啶盐等;重点评述了手性离子液体的合成以及它们在有机化学中的应用,如作为反应溶剂和相转移催化剂、手性溶剂,手性助剂和手性位移试剂等。     

二苯并富烯紫外光谱的取代基效应

通过芴和芳香醛在相转移催化剂三乙基苄基氯化铵存在下发生缩合反应,合成了12个标题化合物, 测定了前7个化合物在17种溶剂中的紫外光谱, 在极性和非极性溶剂中, 其紫外光谱的最大吸收峰频率与Hammett亲电取代常数之间呈良好的线性关系。     

硒催化CO/H2O还原1-硝基萘制1-萘胺

 以具有反应控制相转移特点和可回收再利用的硒为催化剂,以CO/H2O为还原剂,在常压条件下还原1-硝基萘制1-萘胺,考察了不同溶剂和碱对反应的影响. 结果表明,在极性非质子溶剂如二甲基甲酰胺中,以氢氧化钠为助催化剂时1-硝基萘可定量还原为1-萘胺.     

高分子负载CuI催化“一锅法”合成1,2,3-三唑化合物

制备了高分子负载CuI催化剂,将其应用于1,3-偶极环加成反应.制备了1,2,3-三唑类化合物,考察了溶剂、碱、催化剂用量、反应气氛对反应的影响,确定了较佳的反应条件.研究表明,以PEG/H2O为溶剂在室温下就能有效地催化反应,生成单一的1,4取代的三唑化合物,同时,进一步考察了不同底物的反应效果.苄基和烯丙基类卤代烃活性较高.反应8 h得率为72%～94%;饱和卤代烃经延长反应时间有中等以上收率;芳烃反应活性较差,碘代芳烃在85℃反应24 h,只有中等收率,而溴苯根本不发生反应.催化剂经过简单的过滤洗涤后可重复使用4次.显示了较好的催化活性.     

硅胶支载聚乙二醇相转移催化作用的研究

冠醚、鏻盐可支载于硅胶而形成有效的相转移催化剂.Sawiki报道,平均分子量为400的聚乙二醇(PEG)支载于硅胶对KOAc与n-C_4H_9Br的反应有明显的催化作用.本文报道硅胶支载不同链长PEG的催化剂在酯化反应和一些亲核取代反应中的催化效能,及PEG链长、催化剂用量、溶剂极性等对催化效能的影响.     

COF固载铜盐催化苯硼酸与咪唑的Chan-Lam偶联反应

制备了一种含有联吡啶位点的共价有机骨架(COF)材料TpBpy, 并通过配体上的联吡啶位点固载铜盐实现了功能化, 得到的Cu@TpBpy具有大量的不饱和铜配位位点和高表面积, 可用作苯硼酸与咪唑的Chan-Lam偶联反应的多相催化剂. 通过优化溶剂、 铜源、 碱及反应时间等反应条件, 发现使用质子极性溶剂MeOH时的反应产率最高, 而Cu(OAc)₂@TpBpy是效果最佳的催化剂, 可溶性有机碱三乙胺(TEA)的促进效果最好. Cu(OAc)₂@TpBpy在碱TEA的促进下于70 ℃催化咪唑与苯硼酸反应4 h后, 得到目标产物1-苯基咪唑的最大产率为66%. 在最优反应条件下进行了底物拓展, 结果表明, 取代基的位阻效应对催化体系影响显著, 其中对位取代基的4-氯苯硼酸的产率最高(62%).     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.