Orientation Ordering of Nanoparticle Ag/Co Cores Controlled by Electric and Magnetic Fields

The effect of electric and magnetic fields on the sandwich structure Pt/hydrogenated amorphous silicon (a‐Si:H)/stearic acid monolayer/Langmuir–Blodgett film of Ag/Co nanoparticles encapsulated in an organic envelope is studied. This structure is used as a working electrode in an electrochemical cell filled with NaCl solution (1 mM ) and equipped with an Ag/AgCl reference electrode. Reversible changes in voltammograms are observed due to treatments (negative or positive bias voltage and simultaneous laser irradiation) applied to the designed structure before measurements. As an explanation of the observed phenomena we suggest that both the Co‐up and Ag‐up (on the a‐Si:H surface) orientation orderings of nanoparticle Ag/Co cores are repeatedly reached. The role of the photovoltaic material (a‐Si:H) in the observed behavior is explained. Voltammetric measurements with an applied magnetic field support our idea about the orientation ordering of nanoparticle cores.     

A Supramolecular Trap to Increase the Antibacterial Activity of Colistin

A strong interaction between colistin, a last‐resort antibiotic of the polymyxin family, and free lipopolysaccharide (LPS, also referred to as endotoxin), released from the Gram‐negative bacterial (GNB) outer membrane (OM), has been identified that can decrease the antibacterial efficacy of colistin, potentially increasing the dose of this antibiotic required for treatment. The competition between LPS in the GNB OM and free LPS for the interaction with colistin was prevented by using a supramolecular trap to capture free LPS. The supramolecular trap, fabricated from a subnanometer gold nanosheet with methyl motifs (SAuM), blocks lipid A, preventing the interaction between lipid A and colistin. This can minimize endotoxemia and maximize the antibacterial efficacy of colistin, enabling colistin to be used at lower doses. Thus, the potential crisis of colistin resistance could be avoided.     

Harnessing Endogenous Formate for Antibacterial Prodrug Activation by in cellulo Ruthenium‐Mediated Transfer Hydrogenation Reaction

The abundance and evolving pathogenic behavior of bacterial microorganisms give rise to antibiotic tolerance and resistance which pose a danger to global public health. New therapeutic strategies are needed to keep pace with this growing threat. We propose a novel approach for targeting bacteria by harnessing formate, a cell metabolite found only in particular bacterial species, to activate an antibacterial prodrug and selectively inhibit their growth. This strategy is premised on transfer hydrogenation reaction on a biorthogonal substrate utilizing native formate as the hydride source as a means of uncaging an antibacterial prodrug. Using coordination‐directed 3‐component assembly to prepare a library of 768 unique Ru–Arene Schiff‐base complexes, we identified several candidates that efficiently reduced sulfonyl azide functional group in the presence of formate. This strategy paves the way for a new approach of targeted antibacterial therapy by exploiting unique bacterial metabolites.     

Total Synthesis of Albicidin: A Lead Structure from Xanthomonas albilineans for Potent Antibacterial Gyrase Inhibitors

The peptide antibiotic albicidin, which is synthesized by the plant pathogenic bacterium Xanthomonas albilineans, displays remarkable antibacterial activity against various Gram‐positive and Gram‐negative microorganisms. The low amounts of albicidin obtainable from the producing organism or through heterologous expression are limiting factors in providing sufficient material for bioactivity profiling and structure–activity studies. Therefore, we developed a convergent total synthesis route toward albicidin. The unexpectedly difficult formation of amide bonds between the aromatic amino acids was achieved through a triphosgene‐mediated coupling strategy. The herein presented synthesis of albicidin confirms the previously determined chemical structure and underlines the extraordinary antibacterial activity of this compound. The synthetic protocol will provide multigram amounts of albicidin for further profiling of its drug properties.     

Artificial Iono‐ and Photosensitive Membranes Based on an Amphiphilic Aza‐Crown‐Substituted Hemicyanine

Artificial iono‐ and photosensitive membranes based on an amphiphilic aza‐crown‐substituted hemicyanine are assembled on liquid and solid supports and their aggregation behaviour, which is influenced by the binding of metal cations and surface density, is studied. The photoinduced charge‐transfer properties of an analogous non‐amphiphilic hemicyanine in solution are also demonstrated. An asymmetric sandwich dimer model is proposed and existence of such dimers in solution is evidenced by transient absorption and fluorescence anisotropy experiments. Changes in absorption and emission spectra, as well as compression isotherms of the amphiphile observed in the presence of cations, are discussed in terms of 2D molecular reorganisation. Surface‐pressure‐controlled reversible excimer formation at the air–water interphase and excimer‐type emission of Langmuir–Blodgett films in the presence of cations are demonstrated and are discussed on the basis of fibre‐optic fluorimetry and fluorescence microscopy results.     

Effect of Na+ and Ca2+ Ions on a Lipid Langmuir Monolayer: An Atomistic Description by Molecular Dynamics Simulations

Studying the effect of alkali and alkaline‐earth metal cations on Langmuir monolayers is relevant from biophysical and nanotechnological points of view. In this work, the effect of Na⁺ and Ca²⁺ on a model of an anionic Langmuir lipid monolayer of dimyristoylphosphatidate (DMPA^?) is studied by molecular dynamics simulations. The influence of the type of cation on lipid structure, lipid–lipid interactions, and lipid ordering is analyzed in terms of electrostatic interactions. It is found that for a lipid monolayer in its solid phase, the effect of the cations on the properties of the lipid monolayer can be neglected. The influence of the cations is enhanced for the lipid monolayer in its gas phase, where sodium ions show a high degree of dehydration compared with calcium ions. This loss of hydration shell is partly compensated by the formation of lipid–ion–lipid bridges. This difference is ascribed to the higher charge‐to‐radius ratio q/r for Ca²⁺, which makes ion dehydration less favorable compared to Na⁺. Owing to the different dehydration behavior of sodium and calcium ions, diminished lipid–lipid coordination, lipid–ion coordination, and lipid ordering are observed for Ca²⁺ compared to Na⁺. Furthermore, for both gas and solid phases of the lipid Langmuir monolayers, lipid conformation and ion dehydration across the lipid/water interface are studied.     

Asymmetric Synthesis of Axinellamines A and B

Axinellamines A and B are broad‐spectrum antibacterial pyrrole–imidazole alkaloids that have a complex polycyclic skeleton. A new asymmetric synthesis of these marine sponge metabolites is described herein, featuring an oxidative rearrangement and an anchimeric chlorination reaction.     

Synthesis and characterization of antibacterial chromium iron oxide nanoparticle‐loaded activated carbon for ultrasound‐assisted wastewater treatment

The aim of this study was to evaluate the surface adsorption capacity of CrFeO₃ nanoparticle‐loaded activated carbon (CrFeO₃‐NPs–AC) for the removal of a cationic dye (methyl violet, MV). CrFeO₃‐NPs were hydrothermally synthesized and loaded on AC followed by characterization using X‐ray diffraction, field‐emission scanning electron microscopy and energy‐dispersive and Fourier transform infrared spectroscopies. The CrFeO₃‐NPs were tested for in vitro antibacterial activities against Gram‐positive (Staphylococcus aureus) and Gram‐negative (Pseudomonas aeruginosa) bacteria. Minimum inhibitory and minimum bactericidal concentrations of CrFeO₃‐NPs–AC were obtained to be 50 and 100 μg ml^?1, respectively, against S. aureus and 25 and 50 μg ml^?1 against P. aeruginosa. These results indicated the antibacterial properties of CrFeO₃‐NPs–AC. To investigate the adsorption process, several systematic experiments were designed by varying parameters such as adsorbent mass, pH, initial MV concentration and sonication time. The adsorption process was modelled and the optimal conditions were determined to be 0.013 g, 7.4, 15 mg l^?1 and 8 min for adsorbent mass, pH, MV concentration and sonication time, respectively. The real experimental data were found to be efficiently explained by response surface methodology and genetic algorithm model. Kinetic studies for MV adsorption showed rapid sorption dynamics described by a second‐order kinetic model, suggesting a chemisorption mechanism. Then, the experimental equilibrium data obtained at various concentrations of MV and adsorbent masses were fitted to conventional Langmuir, Freundlich, Temkin and Dubinin–Radushkevich isotherm models. Dye adsorption equilibrium data were fitted well to the Langmuir isotherm. From the Langmuir model, the maximum monolayer capacity was calculated to be 65.67 mg g^?1 at optimum adsorbent mass.     

Improving Memory Performances by Adjusting the Symmetry and Polarity of O‐Fluoroazobenzene‐Based Molecules

Three O‐fluoroazobenzene‐based molecules were chosen as memory‐active molecules: FAZO‐1 with a D–A2–D symmetric structure, FAZO‐2 with an A1–A2–A1 symmetric structure, and FAZO‐3 with a D–A2–A1 asymmetric structure. Both FAZO‐1 and FAZO‐2 had a lower molecular polarity, whereas FAZO‐3 had a higher polarity. The fabricated indium–tin oxide (ITO)/ FAZO‐1 /Al (Au) and ITO/ FAZO‐2 /Al (Au) memory devices both exhibited volatile static random access memory (SRAM) behavior, whereas the ITO/ FAZO‐3 /Al (Au) device showed nonvolatile ternary write‐once‐read‐many‐times (WORM) behavior. It should be noted that the reproducibility of these devices was considerably high, which is significant for practical application in memory devices. In addition, the different memory performances of the three active materials were determined to be attributable to the stability of electric‐field‐induced charge‐transfer complexes. Therefore, the switching memory behavior could be tuned by adjusting the molecular polarity.     

O‐Mannosylation Affords a Glycopeptide Hydrogel with Inherent Antibacterial Activities against E. coli via Multivalent Interactions between Lectins and Supramolecular Assemblies

Multivalent carbohydrate–lectin interactions play a crucial role in bacterial infection. Biomimicry of multivalent glycosystems represents a major strategy in the repression of bacterial growth. In this study, a new kind of glycopeptide (Naphthyl‐Phe‐Phe‐Ser‐Tyr, NMY) scaffold with mannose modification is designed and synthesized, which is able to perform supramolecular self‐assembly with the assistance of catalytic enzyme, and present multiple mannose ligands on its self‐assembled structure to target mannose‐binding proteins. Relying on multivalent carbohydrate–lectin interactions, the glycopeptide hydrogel is able to bind Escherichia coli (E. coli) in high specificity, and result in bacterial adhesion, membrane disruption and subsequent cell death. In vivo wound healing assays reveal that this glycopeptide hydrogel exhibits considerable potentials for promoting wound healing and preventing E. coli infection in a full‐thickness skin defect mouse model. Therefore, through a specific mannose–lectin interaction, a biocompatible hydrogel with inherent antibacterial activity against E. coli is achieved without the need to resort to antibiotic or antimicrobial agent treatment, highlighting the potential role of sugar‐coated nanomaterials in wound healing and control of bacterial pathogenesis.     

Influence of nitroxide structure on polystyrene brushes “grafted‐from” silicon wafers

Alkoxyamine derivatives based on 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO), N‐tert‐butyl‐N‐(1‐diethylphosphono‐(2,2‐dimethylpropyl)) nitroxide (SG1) and N‐tert‐butyl‐N‐(2‐methyl‐1‐phenylpropyl) nitroxide (TIPNO) containing a C₁₁ hydrophobic spacer and a reactive triethoxysilyl polar head, were synthesized and anchored to silicon wafers by the Langmuir–Blodgett reactive deposition technique at surface pressures ranging from 15 to 32 mN/m. Polystyrene brushes (M_n ～ 8500–66,400 g/mol) were grown from the alkoxyamine functionalized silicon wafers by nitroxide mediated radical polymerization and characterized by ellipsometry and water contact angle measurements. The main parameters influencing the grafting density and the degree of stretching of the brushes are the nitroxide polarity and, therefore, the behavior of the corresponding alkoxyamines at the air/water interface of the Langmuir–Blodgett trough. Depending on the alkoxyamine chemical structure and the surface pressure during Langmuir–Blodgett deposition, polystyrene brushes with grafting densities of 0.3–1.0 chains/nm² and stretching values of 40–70% were obtained. Regarding alkoxyamines deposited at high surface pressures, size exclusion chromatography experiments performed on both cleaved polystyrene brushes and chains simultaneously grown in the bulk revealed that the polymerization degree of the bulk and surface chains are significantly different, suggesting that steric constrains affect the polymerization kinetics occurring at the silicon surface. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3367–3374, 2008     

Thickness‐dependent swelling of molecular layer‐by‐layer polyamide nanomembranes

The thickness‐dependent water vapor swelling of molecular layer‐by‐layer polyamide films is studied via specular X‐ray reflectivity. The maximum swelling ratio of these ultrathin films scale inversely with thickness but more importantly show a dual‐mode sorption behavior characterized by Langmuir‐like sorption at low relative humidity and network swelling at high relative humidity. The thickness‐dependent network parameters are extracted using a proposed model that builds on Painter‐Shenoy network swelling model while taking into account the glass‐like characteristic below a critical swelling ratio, which also scales inversely with thickness. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 412–417     

Rate‐Reactivity Model: A New Theoretical Basis for Systematic Kinetic Characterization of Heterogeneous Catalysts

Non‐steady‐state kinetic measurements contain a wealth of information about catalytic reactions and other gas–solid chemical interactions, which is extracted from experimental data via kinetic models. The standard mathematical framework of microkinetic models, which are typically used in computational catalysis and for advanced modeling of steady‐state data, encounters multiple challenges when applied to non‐steady‐state data. Robust phenomenological models, such as the steady‐state Langmuir–Hinshelwood–Hougen–Watson equations, are presently unavailable for non‐steady‐state data. Herein, a novel modeling framework is proposed to fulfill this need. The rate‐reactivity model (RRM) is formulated in terms of experimentally observable quantities including the gaseous transformation rates, concentrations, and surface uptakes. The model is linear with respect to these quantities and their pairwise products, and it is also linear in terms of its parameters (reactivities). The RRM parameters have a clear physicochemical meaning and fully characterize the kinetic behavior of a specific catalyst state, but unlike microkinetic models that rely on hypothetical surface intermediates and specific reaction networks, the RRM does not require any assumptions regarding the underlying mechanism. The systematic RRM‐based procedure outlined in this paper enables an effective comparison of various catalysts and the construction of more detailed microkinetic models in a rational manner. The model was applied to temporal analysis of products pulse‐response data as an example, but it is more generally applicable to other non‐steady‐state techniques that provide time‐resolved rates and concentrations. Several numerical examples are given to illustrate the application of the model to simple model reactions.     

Towards Organized Hybrid Nanomaterials at the Air/Water Interface Based on Liquid‐Crystal/ZnO Nanocrystals

The ability to self‐assemble nanosized ligand‐stabilized metal oxide or semiconductor materials offers an intriguing route to engineer nanomaterials with new tailored properties from the disparate components. We describe a novel one‐pot two‐step organometallic approach to prepare ZnO nanocrystals (NCs) coated with deprotonated 4‐(dodecyloxy)benzoic acid (i.e., an X‐type liquid‐crystalline ligand) as a model LC system (termed ZnO‐LC1 NCs ). Langmuir and Langmuir–Blodgett films of the resulting hybrids are investigated. The observed behavior of the ZnO NCs at the air/water interface is rationalized by invoking a ZnO‐interdigitation process mediated by the anchored liquid‐crystalline shell. The ordered superstructures form according to mechanism based on a Z nO‐ i nterdigitation p rocess mediated by l iquid c rystals (termed ZIP‐LC). The external and directed force applied upon compression at the air/water interface and the packing of the ligands that stabilize the ZnO cores drives the formation of nanorods of ordered internal structure. To study the process in detail, we follow a nontraditional protocol of thin‐film investigation. We collect the films from the air/water interface in powder form ( ZnO‐LC1 LB ), resuspend the powder in organic solvents and utilize otherwise unavailable experimental techniques. The structural and physical properties of the resulting superlattices were studied by using electron microscopy, atomic force microscopy, X‐ray studies, dynamic light scattering, thermogravimetric analysis, UV/Vis absorption, and photoluminescence spectroscopy.     

Synthesis and Evaluation of Novel Analogues of Ripostatins

Ripostatins are polyene macrolactones isolated from the myxobacterium Sorangium cellulosum. They exhibit antibiotic activity by inhibiting bacterial RNA polymerase (RNAP) through a binding site and mechanism that are different from those of current antibacterial drugs. Thus, the ripostatins serve as starting points for the development of new anti‐infective agents with a novel mode of action. In this work, several derivatives of ripostatins were produced. 15‐Desoxyripostatin A was synthesized by using a one‐pot carboalumination/cross‐coupling. 5,6‐Dihydroripostatin A was constructed by utilizing an intramolecular Suzuki cross‐coupling macrolactonization approach. 14,14′‐Difluororipostatin A and both epimeric 14,14′‐difluororipostatins B were synthesized by using a Reformatsky type aldol addition of a haloketone, Stille cross‐coupling, and ring‐closing metathesis. The RNAP‐inhibitory and antibacterial activities are presented. Structure–activity relationships indicate that the monocyclic keto‐ol form of ripostatin A is the active form of ripostatin A, that the ripostatin C5–C6 unsaturation is important for activity, and that C14 geminal difluorination of ripostatin B results in no loss of activity.     

电化学原位表面增强拉曼光谱研究Au@Pd纳米粒子薄膜电极上吸附 CO的斯塔克效应

电化学 Stark效应是指电极溶液界面的吸附物或金属-吸附物之间的化学键的振动频率随电极电势而发生变化的现象.研究该效应,可以更好地理解吸附物与基底的相互作用(如吸附构型、吸附取向和覆盖度等随电位的变化),也可反过来推断电极基底的电子构型及其随电势的变化规律,对理解电化学双电层的结构以及电催化反应的构效关系都很有帮助.多年以来,电极表面吸附 CO的电化学 Stark效应广受关注,是由于 CO为很多小分子氧化的中间产物,研究 CO的谱学行为,可加深对 CO以及其它能产生 CO中间物有机小分子的电催化氧化机理和动力学的理解;另一方面, CO与过渡金属之间普遍存在s给电子以及p反馈电子作用,因此 CO也可作为探针分子,通过考察 COad以及 M–COad的振动频率的变化,可推断相应条件下基底的电子与几何结构等信息.
　　本文使用电化学原位表面增强拉曼技术,在一个大的电势范围内考察了 Au@Pd纳米粒子薄膜电极上饱和吸附 CO的振动光谱行为,以期更好地理解 COad与基底的成键作用与电极电势之间的关系.由于纯 Pd电极表面的拉曼信号太弱,实验使用具有核壳结构的 Au@Pd纳米粒子薄膜作为模型电极,并利用 Au核的拉曼增强特性.宽广的电势范围约–1.5到0.55V vs. NHE,通过使用酸性、中性以及碱性电解质得以实现.实验考察的电势上限由 COad氧化起始电位决定,而下限由强烈氢析干扰测量所限制.结果表明,在检测的电势范围内, C–OM(M指在电极表面的桥式吸附CO和穴位吸附 CO所形成的谱带重叠)和 Pd–COM键的振动频率可以分为三段： dνC–OM/dE在–1.5~–1.2 V范围内是185~207 cm–1/V,在–1.2~–0.15 V是83~84 cm–1/V,在–0.2~0.55 V是43 cm–1/V;而 dνPd–COM/dE在–1.5~–1.2 V范围内是–10~–8 cm–1/V,在–1.2~–0.15 V是–31~–30 cm–1/V,在–0.2~0.55 V是–15 cm–1/V.与同时记录的极化曲线对比,认为在中性和碱性介质中所观察到 dνC–OM/dE在–1.2 V附近的急剧变化与电极表面发生了强烈的析氢反应有关.另外,结合密度泛函理论模型计算,认为共吸附的 H减少了 COad从桥式构型到穴位构型的转变,在酸性介质中这种变化不明显,可能是由于对应的电势较高,桥式吸附的 CO比例越大,桥式向穴位的转变本身相对较少.     

Antibacterial inactivation of spiramycin after titanium dioxide photocatalytic treatment

The photocatalytic degradation of an antibiotic (spiramycin) has been studied using immobilized titanium dioxide (TiO₂) as a photocatalyst in a laboratory reactor under ultraviolet illumination (365 nm). The degradation of the antibiotic was monitored by ultraviolet spectrophotometry and high-pressure liquid chromatography and confirmed by an antibacterial activity evaluation. Two types of TiO₂ (P25 and PC500) immobilized on glass plates were compared. For TiO₂ PC500 immobilization on glass and paper was also studied. A slightly better degradation was obtained with TiO₂ P25 for which the degradation kinetics were investigated. The Langmuir–Hinshelwood kinetic model is satisfactorily obeyed at initial time and in the course of the reaction. Adsorption and apparent rate constants were determined. These results show a complete degradation of spiramycin, which was confirmed by the inhibition of the antibacterial activity of Staphylococcus xylosus, when exposed to spiramycin solutions treated with photocatalyst for a short time. In addition, the codegradation of spiramycin and tylosin was investigated and showed that tylosin had a higher affinity to the catalyst TiO₂ P25 than spiramycin. The complete degradation of spiramycin confirms the feasibility of such a photocatalytic treatment process for spiramycin elimination from contaminated water.     

Multifunctional Stimuli Responsive ABC Terpolymers: From Three‐Compartment Micelles to Three‐Dimensional Network

Summary: A highly asymmetric P2VP₅₈‐PAA₉₂₄‐PBMA₄₈ double hydrophilic block terpolymer exhibits a rich phase behavior as a function of pH. In acidic media (pH 1) three compartment micelles with a positively charged outer corona are formed. At high pH, the above structure is transformed into a three‐dimensional transient network constituted of hydrophobic domains interconnected with negatively charged bridging chains (PAA chains). At even higher pH (14) the network is disrupted and finally exhibits a closed loop sol–gel–sol behavior.

AFM images of P2VP₅₈‐PAA₉₂₄‐PBMA₄₈ micellar self assemblies deposited on mica.     

Membrane Affinity and Antibacterial Properties of Cationic Polyelectrolytes With Different Hydrophobicity

The antibacterial behavior of cationic polyelectrolytes is studied using model membrane experiments and in vitro bacterial investigations. The molecular interaction with lipid films is evaluated by the degree of penetration of the polymers into Langmuir monolayers of neutral or negatively charged lipids. The polymer/lipid interaction results in structural changes of the penetrated lipid layer visualized using AFM. The polymers are found to be effective in inhibiting the proliferation of E. coli, B. subtilis and S. aureus. The influence of the chemical structure on the functional behavior is related to the conformational properties. An optimum structure is identified on the basis of antibacterial and hemolytic tests as well as membrane‐destroying efficacy of the antimicrobial polymers.