水/[NH_2 ebim][PF_6]/Triton X-100/正丁醇/环己烷微乳液体系的制备

采用自制的功能离子液体1-(胺乙基)-3-丁基咪唑六氟磷酸盐([NH_2ebim][PF6]),制备了水/[NH_2ebim][PF_6]/Triton X-100/正丁醇/环己烷微乳液体系,通过动态光散射技术测定微乳液的粒径分布和分散相浓度,通过电导率仪测定体系电导率的变化,由这两种分析方法确定微乳液类型,微乳液类型被分为表面活性剂与水的互溶相包油型(O/S+W)和水包油型(O/W),并绘制出拟三元相图;通过耗散动力学(DPD)模拟不同水含量时微乳液体系中的聚集行为,模拟结果呈现出的微乳液类型与实验测定分析结果一致,证明了相图绘制的正确性;文中还考察了Triton X-100与正丁醇的比例对微乳液区域的影响,实验结果表明,随着Triton X-100与正丁醇的比例增加微乳液区域增大。     

自溶液中的吸附XIII.硅胶自环己烷-正脂肪醇和水-正脂肪醇中吸附TRITONX-100

测定了硅胶和活性炭自水、环己烷和正丁醇中吸附TRITON X-100的等温线,提出了TRITON X-100在硅胶-环己烷界面上形成单分子层,在硅胶-水界面上形成双分子层的吸附模型,测定了硅胶自环己烷-正脂肪醇(C2,C4,C8和C12)和水-正脂肪醇(C2和C4)混合溶剂中吸附TRITON X-100的等温线,自环己烷-正脂肪醇中的吸附时,醇的烃链越短,浓度越大,降低TRITON X-100的吸附作用越显著.自水-正脂肪醇中吸附时,正丁醇降低TRITON X-100的吸附作用比乙醇时更显著,但当TRITON X-100的浓度较低时,正丁醇(0.5mol.dm[-3])的存在却使TRITON X-100的吸附有所增加。     

自溶液中的吸附 ⅩⅢ.硅胶自环己烷-正脂肪醇和水-正脂肪醇中吸附Triton X-100

测定了硅胶和活性炭自水、环己烷和正丁醇中吸附Triton X-100的等温线。提出了TritonX-100在硅胶-环己烷界面上形成单分子层,在硅胶-水界面上形成双分子层的吸附模型。测定了硅胶自环己烷-正脂肪醇(C_2,C_4,C_8和C_(12))和水-正脂肪醇(C_2和C_4)混合溶剂中吸附Triton X-100的等温线。自环己烷-正脂肪醇中吸附时,醇的烃链越短,浓度越大,降低Triton X-100的吸附作用越显著。自水-正脂肪醇中吸附时,正丁醇降低Triton X-100的吸附作用比乙醇时更显著。但当Triton X-100的浓度较低时,正丁醇(0.5 mol·din~(-3))的存在却使TritonX-100的吸附有所增加。     

Cu0.05Zn0.95O/聚吡咯纳米复合物的制备和抗菌性能

在CTAB/正己烷/正丁醇/水（W/O）四元反相微乳液体系中原位聚合制备了铜掺杂氧化锌/聚吡咯（CZ/PPy）纳米复合物.用X射线衍射仪、扫描电子显微镜、透射电子显微镜、红外光谱仪和紫外-可见光谱仪分别表征了样品的结构、形貌和光谱学性能;以大肠杆菌（Escherichia coli）、金黄色葡萄球菌（Staphylococcus aureus）和白色念珠菌（Candida albicans）为测试菌株研究了样品的抗菌活性.结果表明PPy包覆在CZ粒子表面形成了核-壳结构的CZ/PPy复合物,PPy链与CZ纳米粒子之间存在一定的相互作用;复合物的抗菌性能优于CZ,且抗菌活性随着CZ含量的增加而增大.     

微乳液法制备Pt/ZrO2催化剂及其催化加氢活性研究

采用十六烷基三甲基溴化铵（CTAB）/正丁醇/环己烷/H2PtCl6微乳液体系,以N2H4.H2O为还原剂,ZrO2为载体,制备Pt/ZrO2催化剂。以对氯硝基苯（p-CNB）选择加氢反应为探针,考察微乳液组成及载体焙烧温度对Pt/ZrO2催化剂催化活性的影响。由TEM、XRD对载体和催化剂进行表征。结果表明,采用微乳...     

AgMn/HZSM-5催化剂上室温O3氧化脱除空气中的苯：Mn含量和水含量的影响

考察了Mn含量和水含量对AgMn/HZSM-5（AgMn/HZ）催化剂上室温O₃氧化（OZCO）脱除空气中苯的影响. 研究发现,Mn含量为2.4 wt%的AgMn/HZ催化剂（AgMn/HZ（2.4））具有大的比表面积和高的MnO_x分散度,OZCO活性和稳定性最高. 反应后的程序升温脱附结果表明,2.4 wt%的Mn含量能有效抑制苯和甲酸在催化剂上的残留. 当Mn含量≤ 2.4 wt%时,催化剂分解O₃的活性在苯氧化过程中占主导;当Mn含量 > 2.4 wt%时,苯的活化起主要作用. 基于AgMn/HZ（2.4）催化剂优越的反应活性和稳定性,进一步研究了湿气流中该催化剂上苯的氧化. 与干气流相比,水汽的加入能显著提高催化剂的反应活性和稳定性,且以0.1-0.2 vol%水含量时最优.     

稀土三元催化剂催化二氧化碳/环氧丙烷/环氧环己烷的三元共聚合研究

在稀土三元催化剂(三氯乙酸稀土配合物/二乙基锌/甘油)催化下实现了二氧化碳、环氧丙烷及环氧环己烷的三元共聚合.该催化剂对二氧化碳与环氧环己烷共聚的催化活性比对二氧化碳与环氧丙烷共聚的高.增加反应单体中环氧环己烷的比例可提高共聚物中环己撑碳酸酯的含量,大幅度改善共聚物的耐热性.     

在水/环己烷微乳体系中制备纳米级氧化锆微粒

研究了在水 环己烷 正己醇 Triton X 100的微乳体系中, 几种主要实验参数对由氯氧化锆制备氧化锆纳米粒子的比表面积及其颗粒大小的影响.实验结果表明，微乳体系中水与表面活性剂的摩尔比ro、氯氧化锆的浓度以及微乳沉淀反应的温度都对氧化锆的比表面积有很大影响.在不同温度的微乳体系，氯氧化锆浓度对最终氧化锆粒子的比表面积的影响不同.通过优化制备条件，制得了比表面积为212 m2•g－1（450 ℃焙烧后）的氧化锆纳米粉体.文中还对所制备的氧化锆样品进行了X射线衍射(XRD)、透射电镜（TEM）和氮气吸附的分析.     

CdS/TiO2复合纳米粒子的光学性质

在Brij35/正己醇/环己烷/水构成的反相微乳体系中，分别合成了CdS、TiO2纳米粒子和TiO2包覆CdS（CdS/TiO2）的复合纳米粒子.测定了它们的紫外-可见吸收和荧光光谱.结果表明， CdS/TiO2复合纳米粒子在可见光区的吸收比相应的两组分的吸收之和更强.纳米CdS和纳米TiO2均有较强的荧光.而且在相同浓度时纳米TiO2的荧光比纳米CdS的荧光更强.但在CdS/TiO2复合纳米粒子中，TiO2的荧光被淬灭，而CdS的荧光稍有降低.     

间歇电沉积法制备纳米MnOx/Ti膜电极及其催化氧化环己烷性能

高选择性氧化环己烷（CHA）制备环己酮和环己醇（KA油）具有重要的工业价值和应用前景. 本文提出采用间歇电沉积法制备纳米MnO_x催化剂负载多孔管式钛膜,构建电催化膜反应器（ECMR）催化氧化环己烷制备环己醇和环己酮. 利用场发射扫描电子显微镜（FESEM）、X射线衍射仪（XRD）和电化学工作站等表征手段对催化剂的结构与性能进行表征. 结果表明,间歇电沉积法制备的催化剂为纳米花球状γ-MnO₂. 与基体钛膜相比,MnO_x/Ti膜电极具有更优的电化学性能和传质性能. 此外,以MnO_x/Ti电催化膜为阳极,不锈钢网为阴极构建ECMR. 当环己烷初始浓度30 mmol·L^-1、反应温度30^oC、停留时间34.3 min、电流密度2.3 mA·cm^-2等条件下,ECMR环己烷转化率达25.6%,KA油总选择性高于99%. 同时,ECMR重复使用8次后表现较高催化稳定性.     

Triton X-100/C10H21OH/H2O体系微乳液与溶致液晶

关于离子型表面活性剂生成的微乳液与溶致液晶已有不少研究，非离子型表面活性剂生成的微乳液与港致液晶的应用正在引起人们的重视，但由于药物提纯的困难，对其物理化学性质的研究还不多见．本文以非离子表面活性剂TritonX－100／C10H21OH／H2O体系为例，研究了非离子型表面活性剂微乳液和溶致液晶的生成及其结构特性．1实验部分试剂ThitonX－100（Aldrich公司，分析纯）正癸醇（分析纯）、水为一次蒸馏水微乳液区域和层状液晶区域的确定方法及小角x射线衍射测定方法同文献，实验温度20±0．1℃．2结果与讨论2·IThtonX－100、CIOH…     

Inhibition of Triton X-100／n-C5H11OH／H2O System on Hydrolysis of Cephanone

The hydrolysis of cephanone in Triton X-100 micelle and Triton X-100/n-C5H11OH/H2O(O/W) microemulsion were studied by means of UV-Vis absorption spectroscopy. The results show that compared with water, Triton X-100 micelle and Triton X-100/n-C5H11OH/H2O (O/W) microemulsion can inhibit the hydrolysis of cephanone. The inhibition effects of Triton X-100 micelle and Triton X-100/n-C5H11OH/H2O (O/W) microemulsion on the hydrolysis of cephanone are related to the location of cephanone in the interphases of Triton X-100 miceUes and Triton X-100/n-C5H11OH/H2O(O/W) microemulsion droplets.     

Wetting and adsorption: I. The structure of adsorbed layer of nonionic surfactants at SiO2/water and SiO2/cyclohexane interface

Based on the adsorption of Triton X-100 on silica/water and silica/cyclohexane interfaces and the adsorption of Triton X-305 on silica/water interface, two adsorption models have been proposed. On silica/cyclohexane interface, the adsorption of Triton X-100 is monomolecular layer. The molecules in the monolayer are presumed to be attached to the silica surface by their EO chain such that their hydrocarbon chain are exposed to the cyclohexane phase. On silica/water interface, the adsorption of Triton X-100 or Triton X-305 is bimolecular layer. The surfactant molecules orientated in the first layer are similar with that on the silica/cyclohexane interface. The molecules in the second layer are postulated to adsorb on those of the first in the opposite orientation, with EO chain directed toward the adsorption medium. The contact angle of quartz-water-cyclohexane (θ_W) as a function of the concentration of Triton X-100 and Triton X-305 in water has been measured with quartz plate employing the captive drop (cyclohexane) technique. The observed θ_W (measured through water) rose from < 10° to a maximum of about 120° for Triton X-100 and of about 40° for Triton X-305 as the concentration of surfactant in water increased, and then fell, as the concentration increased further. The results are consistent with the proposed adsorption models.     

Triton X-100/n-C~4H~9OH/H~2O体系的扩散系数与结构特性

在无外加探针条件下用循环伏安法测定了不同形状TritonX-100胶束的扩散系数,得到第一cmc(临界胶束浓度)为3.1×10^-^4mol.L^-^1,第二cmc为1.3×10^-^3mol.L^-^1,并给出了TritonX-100的电化学反应机理。随正丁醇含量的增加,TritonX-100球形胶束的扩散系数迅速增加,正丁醇的增溶分数略有降低,但胶束内微极性却降低较多;棒状胶束转变为球形胶束,正丁醇的增溶分数基本不变,但胶束内微极性降低。随温度升高,TritonX-100分子与胶束的扩散系数均增加。正丁醇含量<1.5%时,扩散活化能E~D随正丁醇含量增加而迅速增加;但正丁醇含量>1.5%时,E~D增加变缓。     

AOT/Triton X-100混合反胶束体系中假丝酵母脂肪酶催化蓖麻油水解的活性

研究了二(2-乙基己基)琥珀酸磺酸钠(AOT)/Triton X-100混合反胶束体系中假丝酵母脂肪酶(candida rugosa lipase)催化蓖麻油水解的反应. 考察了Triton X-100占总表面活性剂的摩尔分数(x(Triton X-100))、水与总体表面活性剂的摩尔比(ω0)、pH值、反应温度以及底物蓖麻油的浓度等因素对酶活性的影响. 研究结果表明, 加入非离子表面活性剂Triton X-100可以使假丝酵母脂肪酶的活性得到显著提高, 但是当底物蓖麻油的浓度大于0.24 mol·L-1时, 会对假丝酵母脂肪酶产生抑制作用.     

Thermodynamic studies of mixed ionic/nonionic surfactant systems

Mixtures of alkyltrimethylammonium bromide (CnTAB, n=12, 14, 16, 18) and Triton X-100 were studied at a range of mole fractions of ionic surfactant per nonionic surfactant. For each mixture, the cmc obtained from surface tension measurements differed from that obtained using potentiometry. The behavior of these mixed-surfactant systems showed three different regions with increasing total surfactant concentration. From the surface tension and potentiometry data, we obtained the free monomer concentration of ionic surfactant (mi), the micellar mole fraction of surfactant (xi), and the degree of dissociation (alpha) of ionic surfactant. We also obtained the free monomer concentration of Triton X-100 (m2) using PFG-NMR technique. A new equation was introduced to evaluate the activity coefficient in the micellar phase. The excess free energy (GE) and the synergetic parameters of mixtures were determined at various mole fractions of CnTAB/Triton X-100. Finally, the complexity of the synergism parameters was investigated.     

Transfer of coenzyme Q0 from water to aqueous surfactant solutions: the case of Triton X-100

The effect of UQ0 on the micellization equilibrium of Triton X-100 has been studied by the analysis of the UV absorption spectra of Triton X-100. In the range of the UQ0 concentration investigated, the critical micelle concentration (CMC) increases at increasing of the solute concentration. The dependence of the CMC on UQ0 concentration has been used to calculate the generalized Setchenov constant. Mixing and dilution enthalpies of aqueous solutions of UQ0 and Triton X-100 were measured and used to calculate the enthalpies of transfer of UQ0 from water to Triton X-100 aqueous solutions. From the dependence of the enthalpy of transfer on surfactant concentration, the distribution constant between aqueous and micellar phase and the standard enthalpy of transfer from water to Triton X-100 micelles were evaluated along with the standard transfer free energy and entropy. All measurements were carried out at 298 K.     

非离子表面活性剂层状液晶的结构与增溶作用

相行为研究表明，与ＴｒｉｔｏｎＸ－１００／Ｃ＿６Ｈ＿６／Ｈ＿２Ｏ体系相比，ＴｒｉｔｏｎＸ－１００／Ｃ＿（１０）Ｈ＿（２１）ＯＨ／Ｈ＿２Ｏ体系更易于生成层状液晶，并更为稳定，小角Ｘ－射线衍射表明；ＴｒｉｔｏｎＸ－１００／Ｃ＿（１０）Ｈ＿（２１）ＯＨ／Ｈ＿２Ｏ体系层状液晶中，Ｃ＿（１０）Ｈ＿（２１）ＯＨ与ＴｒｉｔｏｎＸ－１００交替排列于两亲双层中，Ｃ＿（１０）Ｈ＿（２１）ＯＨ／ＴｒｉｔｏｎＸ－１００重量比增加，两亲双层厚度ｄ＿０值不变。以Ｃ＿６Ｈ＿６代替Ｃ＿（１０）Ｈ＿（２１）ＯＨ后，Ｃ＿６Ｈ＿６存在于两亲双层的油层和渗入ＴｒｉｔｏｎＸ－１００分子链尾周围，使得溶剂渗透率减少，并且Ｃ＿６Ｈ＿６／ＴｒｉｔｏｎＸ－１００增加，ｄ＿０值增加。     

Transformation from ordered islands to holes in phase-separating P2VP/PS blend films by adding Triton X-100

Our previous investigation showed that the ordered hexagonal island pattern in the phase-separating polymeric blend films of polystyrene and poly(2-vinylpyridine) (PS/P2VP) formed due to the convection effect by proper control of PS molecular weight, solvent evaporation rate, and the weight ratio of PS to P2VP. In this paper, we further illustrate that, by adding a proper amount of the surfactant Triton X-100 to the PS/P2VP toluene solution, the ordered hexagonal island pattern can be transformed to the ordered honeycomb pattern. The effects of the amount of Triton X-100 on the surface morphology evolution and the pattern transformation are discussed in terms of the collapse of Triton X-100, phase separation between Triton X-100/P2VP and PS, the interfacial interaction between Triton X-100/P2VP and the mica substrate, and the Bénard-Marangoni convection.     

Wetting and adsorption: II. Adsorption of Triton X-100 and Triton X-305 onto carbon black from water and cyclohexane solutions

The adsorption isotherms of nonionic surfactants Triton X-100 and Triton X-305 from water and cyclohexane on carbon black have been determined at 15 and 30°C. The Langmuir-type and BET-type isotherms are obtained for adsorption of Triton X-100 and Triton X-305 from water and cyclohexane respectively. Both the contact angles of water for graphite/water/air and graphite/water/cyclohexane decrease monotonously with increasing surfactant concentration. From these results, it is proposed that the adsorption of Triton X-100 and Triton X-305 on carbon black or graphite from water is monolayer. For the adsorption from cyclohexane solutions, the ethyleneoxide group of the surfactant molecules may be adsorbed onto the polar spot at the surface of carbon black, and the hydrophobic group of adsorbed molecules may direct toward the liquid phase or attaches to the nonpolar surface region around the polar spot. As the concentration increases, the ethylene oxide groups of the adsorbed molecules can be aggregated with each other via polar interactions to form hemi-reversed micelle.