Single-crystal synthesis, structure analysis, and physical properties of the calcium ferrite-type NaxTi2O4 with 0.558<x<1

Single crystals of calcium ferrite CaFe₂O₄-type NaTi₂O₄ having millimeter-sized needle shapes were synthesized by a reaction of Na metal and TiO₂ in a sealed iron vessel at 1473 K. Sodium-deficient Na_xTi₂O₄ single crystals with 0.558<x<1 were successfully synthesized by a topotactic oxidation reaction using NaTi₂O₄ single crystals as parent materials. The crystal structures of Na_xTi₂O₄ with x=0.970, 0.912, 0.799, 0.751, 0.717, 0.686, 0.611, and 0.558 were determined by the single-crystal X-ray diffraction method. The basic framework constructed by the Ti1O₆ and Ti2O₆ double rutile chains was maintained in these Na_xTi₂O₄ compounds. Based on the results of bond valence analysis, we speculated that the Ti1 sites are preferentially occupied by Ti³⁺ cations over the compositional range of 0.8<x<1, while both the Ti1 and Ti2 sites are randomly occupied by Ti³⁺ and Ti⁴⁺ cations at x=0.558. Magnetic susceptibility data indicated that the broad maximum around 40 K observed in as-grown NaTi₂O₄ is suppressed by an Na deficiency and vanishes in Na_0.717Ti₂O₄. The electrical resistivity increased with the Na deficiency; however, it was still semiconductive in Na_0.799Ti₂O₄.     

中温固体氧化物燃料电池La1.6Sr0.4Ni1-xCuxO4阴极材料的制备及电化学性能

采用甘氨酸-硝酸盐法合成了中温固体氧化物燃料电池阴极材料La_1.6Sr_0.4Ni_1-xCu_xO₄ (x=0.2, 0.4, 0.6,0.8), 利用X射线衍射(XRD)和扫描电子显微镜(SEM)对其结构和微观形貌进行了表征. 结果表明, 该阴极材料与固体电解质Ce_0.9Gd_0.1O_1.95(CGO)在1000 °C烧结时不发生化学反应, 且烧结4 h 后, 二者之间可形成良好的接触界面. 利用电化学交流阻抗谱技术对阴极材料的电化学性能进行研究, 结果显示, 当Cu离子掺杂量(x)为0.6 时, La_1.6Sr_0.4Ni_0.4Cu_0.6O₄阴极具有最小的极化电阻, 在空气中当测试温度为750 °C时, 极化电阻为0.35 Ω·cm². 在不同氧分压条件下电化学阻抗谱分析结果表明, 电极上的两个氧还原反应主要包含氧离子从三相界面向电解质CGO 转移的过程和电荷的迁移过程, 其中电荷的迁移过程为电极反应的速率控制步骤.La_1.6Sr_0.4Ni_0.4Cu_0.6O₄电极在空气中700 °C和阴极电流密度为45 mA·cm^-2时, 阴极过电位为45 mV. 本研究的初步结果表明La_1.6Sr_0.4Ni_1-xCu_xO₄材料是一种电化学性能较为优良的新型中温固体氧化物燃料电池(IT-SOFC)阴极材料.     

溶胶-凝胶法合成Li1-xNaxMn2O4及其作为水系锂离子电池正极材料的电化学性能

用溶胶凝胶法合成了Na⁺离子掺杂的Li_1-xNa_xMn₂O₄(x=0,0.01,0.03,0.05)。X射线衍射图表明Na⁺取代Li⁺进入Li_1-xNa_x Mn₂O₄晶格中,扫描电镜图看出产物是粒径为100~300 nm的颗粒。恒流充放电测试结果表明,Li_0.97Na_0.03Mn₂O₄在2C倍率下循环100圈后放电容量保持率比未掺杂的LiMn₂O₄从51.2%提升到84.1%。循环伏安测试表明Na⁺离子掺杂降低了材料极化且增大了锂离子扩散系数。10C倍率下Li_0.97Na_0.03Mn₂O₄仍有79.0 mAh·g^-1的放电容量,高于未掺杂样品的52.1 mAh·g^-1。Na⁺离子掺杂可以稳定材料结构并提高锂离子扩散系数,从而提高LiMn₂O₄的电化学性能,是一种可行的改性方法。     

溶胶-凝胶法合成Li_(1-x)Na_xMn_2O_4及其作为水系锂离子电池正极材料的电化学性能

用溶胶凝胶法合成了Na+离子掺杂的Li_(1-x)Na_xMn_2O_4(x=0,0.01,0.03,0.05)。X射线衍射图表明Na+取代Li+进入Li_(1-x)Na_xMn_2O_4晶格中,扫描电镜图看出产物是粒径为100~300 nm的颗粒。恒流充放电测试结果表明,Li_(0.97)Na_(0.03)Mn_2O_4在2C倍率下循环100圈后放电容量保持率比未掺杂的LiMn_2O_4从51.2%提升到84.1%。循环伏安测试表明Na+离子掺杂降低了材料极化且增大了锂离子扩散系数。10C倍率下Li0.97Na0.03Mn2O4仍有79.0 m Ah·g-1的放电容量,高于未掺杂样品的52.1 m Ah·g~(-1)。Na+离子掺杂可以稳定材料结构并提高锂离子扩散系数,从而提高LiMn_2O_4的电化学性能,是一种可行的改性方法。     

CexTi1-xO2复合氧化物表面结构和体相结构的演变

利用X射线衍射、N₂吸附等温线、X射线光电子能谱、X射线吸收谱、H₂-程序升温还原、甲基橙选择化学吸附和等电点测定等方法研究了共沉淀方法制备的一系列Ce_xTi_1-xO₂复合氧化物的结构. 成功发展了甲基橙选择化学吸附和等电点方法研究Ce_xTi_1-xO₂复合氧化物的最外层表面结构, 并定义了“等价CeO₂表面覆盖度”来描述Ce_xTi_1-xO₂复合氧化物的最外层表面结构. Ce_xTi_1-xO₂复合氧化物 (x ≥ 0.7)形成立方萤石相固溶体, Ce_0.3Ti_0.7O₂表现出纯的单斜相, 而其它复合氧化物表现出混合相. Ce_xTi_1-xO₂复合氧化物最外层表面结构的演变行为不同于其体相结构.Ce_0.7Ti_0.3O₂立方萤石相固溶体最外层表面已经部分形成了单斜相Ce_0.3Ti_0.7O₂, 随Ce含量的降低, 单斜相Ce_0.3Ti_0.7O₂从最外层表面向体相生长. Ce_xTi_1-xO₂复合氧化物立方萤石相固溶体和单斜相Ce_0.3Ti_0.7O₂分别在相对较低和较高的温度表现出好的还原性能. 上述结果提供了全面和深层次的Ce_xTi_1-xO₂复合氧化物结构信息.     

Direct synthesis of dimethyl carbonate ?from CH3OH AND CO2 by H3PW12O40/CexTi1-xO2 catalyst

Summary Ce_xTi_1-xO₂ and H₃PW₁₂O₄₀/Ce_xTi_1-xO₂ catalysts were prepared using a sol-gel method, and applied to the direct synthesis of dimethyl carbonate from methanol and carbon dioxide. H₃PW₁₂O₄₀/Ce_xTi_1-xO₂ showed a better catalytic performance than the corresponding Ce_xTi_1-xO₂, due to the bifunctional catalysis of Br?nsted acid sites (provided by H₃PW₁₂O₄₀) and base sites (provided by Ce_xTi_1-xO₂). H₃PW₁₂O₄₀/Ce_0.1Ti_0.9O₂ showed the highest catalytic performance among the H₃PW₁₂O₄₀/Ce_xTi_1-xO₂ catalysts.     

Structures of Stoichiometric Sodium Oxide Cluster Cations Studied by Ion Mobility Mass Spectrometry

Structures of stable compositions of sodium oxide cluster cations (Na_nO_m⁺,n≤11) have been investigated by ion mobility mass spectrometry. Stoichiometric compositions series, Na(Na₂O)_(n-1)/2⁺ (n=3, 5, 7, 9, and 11), were observed as stable composition series, and NaO(Na₂O)_(n-1)/2⁺ series (n=5, 7, 9, and 11) were observed as secondary stable series in the mass spectra. To assign the structures of these cluster ion series, collision cross sections between the ions and helium buffer gas were determined experimentally from the ion mobility measurements. Theoretical collision cross sections were also calculated for optimized structures of these compositions. Finally, the structures of Na(Na₂O)_(n-1)/2⁺ and NaO(Na₂O)_(n-1)/2⁺ were assigned to those having similar structural frames for each n except for n=9. All bonds in the assigned structures of Na(Na₂O)_(n-1)/2⁺ were between sodium and oxygen. On the other hand, there was one O-O bond in addition to Na-O bonds in NaO(Na₂O)_(n-1)/2⁺. This result indicates that NaO(Na₂O)_(n-1)/2⁺ have a peroxide ion (O₂^2-) as a substitute for an oxide ion (O^2-) of Na(Na₂O)_(n-1)/2⁺. As a result, both stable series, Na(Na₂O)_(n-1)/2⁺ and NaO(Na₂O)_(n-1)/2⁺, are closed-shell compositions. These closed-shell characteristics have a strong influence on the stability of sodium oxide cluster cations.     

长循环高电压钠离子电池正极材料P2-Na2/3Mn1/3Bi1/3Ni1/3O2的合成及性能

镍基层状氧化物NaNiO₂钠离子电池材料具有高电压和高容量的特性,且制备方法较为简单,但姜-泰勒(Jahn-Teller)效应使其在高倍率循环下容量较低以及在高电压(4.5 V)下无法稳定循环。通过调节溶胶-凝胶工艺的条件,设计、合成了Na_2/3Mn_1/3Bi_1/3Ni_1/3O₂片层状金属氧化物,并将其作为正极活性材料,在空气环境中组装成钠离子电池,进行电化学测试,考察Bi、Mn掺入量对电池电化学影响。研究结果表明：当金属Mn和Bi共掺时,在1.2~4.5 V宽电压范围内,电池在循环50周后容量为90.39 mAh·g^-1。在2.0~4.0 V电压范围内1.0C (115 mA·g^-1)倍率下恒流充放电50周后的容量保持率为96.96%,循环850周后的保持率为80.15%,具有良好的循环稳定性和安全性。     

长循环高电压钠离子电池正极材料P2-Na2/3Mn1/3Bi1/3Ni1/3O2的合成及性能

镍基层状氧化物NaNiO₂钠离子电池材料具有高电压和高容量的特性,且制备方法较为简单,但姜-泰勒(Jahn-Teller)效应使其在高倍率循环下容量较低以及在高电压(4.5 V)下无法稳定循环。通过调节溶胶-凝胶工艺的条件,设计、合成了Na_2/3Mn_1/3Bi_1/3Ni_1/3O₂片层状金属氧化物,并将其作为正极活性材料,在空气环境中组装成钠离子电池,进行电化学测试,考察Bi、Mn掺入量对电池电化学影响。研究结果表明：当金属Mn和Bi共掺时,在1.2~4.5 V宽电压范围内,电池在循环50周后容量为90.39 mAh·g^-1。在2.0~4.0 V电压范围内1.0C (115 mA·g^-1)倍率下恒流充放电50周后的容量保持率为96.96%,循环850周后的保持率为80.15%,具有良好的循环稳定性和安全性。     

A High‐Voltage and Ultralong‐Life Sodium Full Cell for Stationary Energy Storage

Recently, there has been great interest in developing advanced sodium‐ion batteries for large‐scale application. Most efforts have concentrated on the search for high‐performance electrode materials only in sodium half‐cells. Research on sodium full cells for practical application has encountered many problems, such as insufficient cycles with rapid capacity decay, low safety, and low operating voltage. Herein, we present a layered P2‐Na_0.66Ni_0.17Co_0.17Ti_0.66O₂, as both an anode (ca. 0.69 V versus Na⁺/Na) and as a high‐voltage cathode (ca. 3.74 V versus Na⁺/Na). The full cell based on this bipolar electrode exhibits well‐defined voltage plateaus near 3.10 V, which is the highest average voltage in the symmetric cells. It also shows the longest cycle life (75.9 % capacity retention after 1000 cycles) in all sodium full cells, a usable capacity of 92 mAh g^?1, and superior rate capability (65 mAh g^?1 at a high rate of 2C).     

Na1－xZr2－xNbxP3O12系列化合物的水热晶化研究

采用水热晶化反应，制备出传统需要高大相反合成的掺杂，ＮＡＳＩＣＯＮ化合物Ｎａ１－ｘＺｒ２－ｘＮｂｘＰ３Ｏ１２（０＜Ｘ＜１），并应用ＸＲＤ，ＩＲ方法对产物的晶体结构进行了研究。表明水热晶化产物是纯的物相并具有与ＮａＺｒ２Ｐ３Ｏ１２相同的结构，固体＾３１ＰＮＭＲ研究证实Ｎｂ＾５＋部分取代了Ｚｒ＾４＋所在位置，参与骨架的组成，并统计分布于结构中，水热晶化产物与固相反应产物具有相同的离子电导性能。     

A High-Energy NASICON-Type Na3.2MnTi0.8V0.2(PO4)3 Cathode Material with Reversible 3.2-Electron Redox Reaction for Sodium-Ion Batteries

Na superionic conductor (NASICON) structured cathode materials with robust structural stability and large Na⁺ diffusion channels have aroused great interest in sodium-ion batteries (SIBs). However, most of NASICON-type cathode materials exhibit redox reaction of no more than three electrons per formula, which strictly limits capacity and energy density. Herein, a series of NASICON-type Na_3+xMnTi_1−xV_x(PO₄)₃ cathode materials are designed, which demonstrate not only a multi-electron reaction but also high voltage platform. With five redox couples from V^5+/4+ (≈4.1 V), Mn^4+/3+ (≈4.0 V), Mn^3+/2+ (≈3.6 V), V^4+/3+ (≈3.4 V), and Ti^4+/3+ (≈2.1 V), the optimized material, Na_3.2MnTi_0.8V_0.2(PO₄)₃, realizes a reversible 3.2-electron redox reaction, enabling a high discharge capacity (172.5 mAh g⁻¹) and an ultrahigh energy density (527.2 Wh kg⁻¹). This work sheds light on the rational construction of NASICON-type cathode materials with multi-electron redox reaction for high-energy SIBs.     

长循环高电压钠离子电池正极材料P2-Na2/3Mn1/3Bi1/3Ni1/3O2的合成及性能

镍基层状氧化物NaNiO₂钠离子电池材料具有高电压和高容量的特性,且制备方法较为简单,但姜-泰勒(Jahn-Teller)效应使其在高倍率循环下容量较低以及在高电压(4.5 V)下无法稳定循环。通过调节溶胶-凝胶工艺的条件,设计、合成了Na_2/3Mn_1/3Bi_1/3Ni_1/3O₂片层状金属氧化物,并将其作为正极活性材料,在空气环境中组装成钠离子电池,进行电化学测试,考察Bi、Mn掺入量对电池电化学影响。研究结果表明:当金属Mn和Bi共掺时,在1.2~4.5 V宽电压范围内,电池在循环50周后容量为90.39 mAh·g^-1。在2.0~4.0 V电压范围内1.0C (115 mA·g^-1)倍率下恒流充放电50周后的容量保持率为96.96%,循环850周后的保持率为80.15%,具有良好的循环稳定性和安全性。     

Phase relations in NaxCrxTi8−xO16 at 1350 °C and crystal structure of hollandite-like Na2Cr2Ti6O16

Phase relations of rutile, freudenbergite, and hollandite structures were examined in the pseudobinary system NaCrO₂-TiO₂ (i.e., Na_xCr_xTi_8−xO₁₆) at 1350 °C. The hollandite structure was obtained in the composition range 1.7?x?2.0. The symmetry of the samples at room temperature was tetragonal for x=1.7 and 1.75, and monoclinic for x=1.8 and above. Single crystals of monoclinic hollandite Na₂Cr₂Ti₆O₁₆ were grown and the structure refinement has been carried out using an X-ray diffraction technique. The space group was I2/m and cell parameters were a=10.2385(11), b=2.9559(9), c=9.9097(11)Å, and β=90.545(9)° with Z=1. The Na ion distribution in the tunnel was markedly deformed from that in the tetragonal form. It was suggested that Cr/Ti ratios were different between the two framework metal sites.     

Trace Nb-doped Na_(0.7)Ni_(0.3)Co_(0.1)Mn_(0.6)O_2 with suppressed voltage decay and enhanced low temperature performance

The P2-type manganese-based Na_(0.7)MnO_2 cathode materials attract great interest due to their high theoretical capacity.However,these materials suffer from rapid capacity fading,poor rate performance and severe voltage decay resulting from phase transition and sluggish reaction kinetics.In this work we report a novel Nb-doped Na_(0.7) [Ni_(0.3)Co_(0.1)Mn_(0.6)]_(1-x)Nb_xO_2 with significantly suppre ssed voltage decay and enhanced cycling stability.The strong Nb-O bond can efficiently stabilize the TMO fra mework,and the as prepared material demonstrates much lower discharge midpoint voltage decay(0.132 V) than that of pristine one(0.319 V) after 200 cycles.Consequently,a remarkably improved cycling perfo rmance with a capacity retention of 87.9% after 200 cycle at 0.5 C is achieved,showing a 2.4 fold improvement as compared to the control sample Na_(0.7)Ni_(0.3)Co_(0.1)Mn_(0.6)O_2(～37% rotation).Even at 2 C,a capacity retention of 68.4% is retained after 500 cycles.Remarkably,the as prepared material can be applied at low temperature of-20℃,showing a capacity retention of 81% as compared to that at room temperature.     

层状Li(Ni1-xCox)O2结构研究

0引言层状钴酸锂是目前锂离子电池主要正极材料,但是,随着锂离子电池的广泛使用,急需比钴酸锂价格低和来源广泛的正极材料,层状锰酸锂和层状镍酸锂受到重视。由于锰氧化物存在有J-T效应,因此,严格意义上的层状锰酸锂的制备极其困难。制备层状镍酸锂也非常困难,高温反应极易生成Li1-xNi1 xO2,具有此种结构的镍酸锂存在严重首次能量衰减和循环性能下降的缺点。采用其他元素掺杂镍酸锂克服其缺点的研究已经很多,其中钴掺杂镍酸锂由于显示了良好的效果而被认为是最有希望替代钴酸锂的锂离子电池正极材料。有关层状镍钴酸锂的研究很多,但不少的…     

铬掺杂的锂离子电池正极材料LiVPO4F的制备以及电化学行为的研究

采用高温固相法2步合成了掺Cr的锂离子电池正极材料LiV_1-xCr_xPO₄F(x=0，0.01，0.03，0.05，0.07)，XRD测试表明LiV_1-xCr_xPO₄F属三斜晶系。通过恒电流充放电，循环伏安和交流阻抗实验表明：掺Cr后LiVPO₄F正极材料更有利于锂离子的嵌入和嵌出，材料的放电容量和循环性能进一步提高，例如，铬掺杂的LiVPO₄F样品在室温、0.2 C倍率下充放电，循环50周后容量在110 mAh·g^-1以上。文中还讨论了充放电容量随掺Cr量的关系，n_Cr含量为0.03的LiV_1-xCr_xPO₄F有着较高的放电平台和良好的循环稳定性。     

Electrochemical and Structural Study of Layered P2‐Type Na2/3Ni1/3Mn2/3O2 as Cathode Material for Sodium‐Ion Battery

P2‐type Na_2/3Ni_1/3Mn_2/3O₂ was synthesized by a controlled co‐precipitation method followed by a high‐temperature solid‐state reaction and was used as a cathode material for a sodium‐ion battery (SIB). The electrochemical behavior of this layered material was studied and an initial discharge capacity of 151.8 mA h g^?1 was achieved in the voltage range of 1.5–3.75 V versus Na⁺/Na. The retained discharge capacity was found to be 123.5 mA h g^?1 after charging/discharging 50 cycles, approximately 81.4 % of the initial discharge capacity. In situ X‐ray diffraction analysis was used to investigate the sodium insertion and extraction mechanism and clearly revealed the reversible structural changes of the P2‐Na_2/3Ni_1/3Mn_2/3O₂ and no emergence of the O2‐Ni_1/3Mn_2/3O₂ phase during the cycling test, which is important for designing stable and high‐performance SIB cathode materials.     

Structural,Magnetic and Optical Properties of BiFe1-xNbxO3

Nb doped multiferroic BiFe_1-xNb_xO₃ (0 <x <0.05) polycrystalline powders have been syn-thesized by using a sol-gel method. The effect of Nb dopant on the structural, magnetic and optical properties is investigated. According to the X-ray di raction data and the result of Rietveld re nement, all the samples maintain the R3c phase, while the lattice parameters a, c, the cell volume V and the Fe-O-Fe bond angle change. The remnant magnetization enhances by appropriate Nb doping due to the decreasing of the grain size. Meanwhile, Nb dopant leads to the narrowing of the band gap of BiFe_1-xNb_xO₃ samples.     

锂离子电池正极材料Li1.2Mn0.54-xNi0.13Co0.13ZrxO2的制备及电化学性能

为了改善富锂锰基正极材料Li_1.2Mn_0.54Ni_0.13Co_0.13O₂ 的循环性能,采用燃烧法合成了正极材料Li_1.2Mn_0.54-xNi_0.13Co_0.13Zr_xO₂（x=0.00,0.01,0.02,0.03,0.06）. 通过X射线衍射（XRD）和扫描电镜（SEM）对其结构与形貌进行了表征,利用恒电流充放电测试,循环伏安（CV）及电化学交流阻抗谱（EIS）技术对其电化学性能进行测试. 结果表明,Li_1.2Mn_0.54-xNi_0.13Co_0.13Zr_xO₂（x=0.00,0.01,0.02,0.03,0.06）正极材料均具有α-NaFeO₂型层状结构;在室温,2.0-4.8 V电压范围,以0.1C和1.0C（充放电电流以1.0C=180 mA·g^-1计算）倍率充放电进行测试,样品Li_1.2Mn_0.52Ni_0.13Co_0.13Zr_0.02O₂的首次放电比容量分别为280.3 和206.4 mAh·g^-1. 其中,在1.0C倍率下,100次循环后容量保持率由原来的73.2%提高到88.9%;以5.0C倍率充放电进行测试,经50次循环后,掺杂正极材料的放电比容量为76.5 mAh·g^-1,而未掺杂材料仅有15.0 mAh·g^-1. 在50、25 和-10 ℃,2.0C倍率条件下,掺杂正极材料的电化学性能均得到有效改善,其中,在- 10℃ 经过50 次循环后正极材料Li_1.2Mn_0.52Ni_0.13Co_0.13Zr_0.02O₂比未掺杂的正极材料相比,其放电比容量提高了61.1%.