Simultaneous determination of dihydroxybenzene and phenylenediamine positional isomers using capillary zone electrophoresis coupled with amperometric detection

In general capillary zone electrophoresis (CZE) separation models, o‐, m‐, and p‐phenylenediamine isomers can be separated in a weak acidic running buffer for their pK_a values being 4.52, 5.64, 6.04, respectively, while o‐, m‐, and p‐dihydroxybenzene isomers can be separated in a weak basic buffer for their pK_a values being 9.40, 9.40 and 10.04, respectively. So, it is hard to find a suitable running buffer at a fixed pH in normal CZE for simultaneous separation of these two groups of positional isomers. In this paper, a novel method based on alternately running two different pH buffers in CZE coupled with amperometric detection (CZE‐AD) was designed to simultaneously determine these two groups of positional isomers. It is found that when two different pH running buffers were employed alternately under appropriate order and time, the six analytes could be separated perfectly in less than 20 min and the detection limits were as low as 10^–7 mol/L. Furthermore, the effects of working electrode potential, pH and concentration of running buffer, separation voltage and injection time on CZE–AD were investigated. Experimental results demonstrated that the introduced method was practical to simultaneously determine two groups of positional isomers with different pK_a and had some advantages of high sensitivity, good repeatability and small sample requirement.     

Medium-Pressure Liquid Chromatography Coupled to Electrospray Ionization Mass Spectrometry for Separation and On-Line Characterization of Flavonoids from Asparagus officinalis

A novel method for separation and on-line characterization of flavonoids from Asparagus officinalis by medium-pressure liquid chromatography coupled to electrospray ionization multi-stage mass spectrometry (MPLC-ESI-MSⁿ) was successfully established. The hyphenation between MPLC and ESI-MSⁿ was designed to keep the split ratio exactly in the range from 1:100 to 1:300. The separation procedure was guided by the chromatogram of ion current of MSⁿ and the structures of compounds were characterized by fragments information at the same time. Consequently, it was proved that MPLC coupled with ESI-MSⁿ was an effective method for separation of compounds from multi-component mixtures with high purity and desired amounts and simultaneous elucidation of chemical structures.

     

Capillary Zone Electrophoresis with Amperometric Detection for Composition Analysis of Laminarin

IntroductionInrecentdecades ,manykindsofplantpolysaccha rideshavebeenextensivelystudiedfortheirpotentialvalueinimmunology ,especiallyincancertherapeusis .Laminar in ,onekindofheteropolysaccharidesisolatedfromLami nariajaponica ,wasfoundtobeoneoftheinhibitorsofba sicfabriccell generationfactor (bFGF)anddepresstheformationoftubestructureofendothelialcells ,whichfur therdepresstheactivationofrats’cancercells .1Itwasal sofoundthatlaminarinsulfatecouldinhibitextracellularmatrix (ECM)degradation…     

Determination of Phenolic Acids in Herba Epilobi by ITP–CE in the Column-Coupling Configuration

The combination of capillary isotachophoresis (ITP) and capillary zone electrophoresis (CZE) in the column-coupling configuration has been optimized in a mode in which the background electrolyte employed in the CZE step was different from the leading and terminating electrolytes of the ITP step. The optimum composition of the electrolyte system was 0.01 M HCl, 0.02 M IMI, 0.2% HEC, pH 7.2 (leading electrolyte), 0.01 M HEPES, pH 8.2 (terminating electrolyte), and 25 mM MES, 50 mM TRIS, 30 mM boric acid, 0.2% HEC, pH 8.3 (background electrolyte). All solutions contained 20% methanol. The timing of the transfer of isotachophoretically stacked analyte zones into the CZE column was also optimized. An ITP–CZE method with UV detection at 270 nm was developed for separation of nine phenolic acids (protocatechuic, syringic, vanillic, cinnamic, ferulic, caffeic, ρ-coumaric, chlorogenic, and gentisic acids) in a model mixture and used for assay of some of these acids in a methanolic extract of herba epilobi. Application of ITP–CZE resulted in 100-fold better sensitivity than conventional CZE; limits of detection ranged between 10 and 60 ng mL⁻¹. When MES–TRIS–borate-based buffer, pH 8.3, was used in the CZE separation step the linearity of the ITP–CZE response was satisfactory (correlation coefficients were from 0.9937 to 0.9777). Repeatability was also satisfactory (RSD values ranged between 0.77% and 1.28% for migration times and between 1.65% and 13.69% for peak area). Revised: 23 March and 27 April 2006     

毛细管电泳研究杯[4]吡咯和二吡咯化合物对无机阴离子的识别作用

Capillary electrophoresis （CE） can separate charged and neutral substances with high speed and efficiency. In this paper, utilizing meso-octamethylcalix[4]pyrrole, meso-tetraspirocyclohexylcalJx[4]pyrrole, bimethyl bi（2-pyrryl）- methane and 1,1-bi（2-pyrryl）cyclohexane as additives in capillary zone electrophoresis （CZE） electrolyte, their recognition ability to inorganic anions was discussed. The dipyrrylmethanes have better recognition ability than others. Their effects on separation of seven normal inorganic anions by CZE were studied.     

CE Determination of Carbohydrates Using a Dipeptide as Separation Electrolyte

The influence of aminoacid and peptide type buffers as the separation electrolyte to the resolution of underivatized neutral carbohydrates in capillary electrophoresis was investigated. With the use of plain glycylglycine as the background electrolyte, a noticeable improvement in the resolution of carbohydrates was observed. Without any additive, 50 mmol L⁻¹ glycylglycine electrolyte at pH 12 provides both the fast separation and indirect detection of sugars. The electrophoretic mobilities of 16 sugars were calculated at this buffer and the combinations of 10 sugars were simultaneously detected. The method was applied to the determination of sucrose, glucose, and fructose in commercial juice samples.     

Separation and Determination of D-Gluconic Acid Produced During Fermentation by Capillary Zone Electrophoresis

Abstract

A novel method was developed for separation and determination of D-gluconic acid produced during fermentation by capillary zone electrophoresis (CZE) with direct UV detection at 214 nm, using selected carrier electrolyte composed of 6 mM potassium biphthalate, 50 mM disodium hydrogen phosphate and 15% (v/v) acetonitrile. The effects of concentration of phthalate, phosphate and organic modifier (acetonitrile), as well as temperature for the separation were investigated. The method is simple, inexpensive and will make it very useful in the gluconic acid industry.     

Online preconcentration and two‐dimensional separation of cationic compounds via hyphenation of capillary zone electrophoresis with cyclodextrin‐modified micellar electrokinetic capillary chromatography

A novel preconcentration/separation approach, which online combined CZE with CD‐modified MEKC, was developed for simultaneous enhancing resolving power and detection sensitivity. CZE with cation‐selective exhaustive injection and transient ITP preconcentration was used as the first dimension, from which the effluent fractions were further analyzed by CD‐modified MEKC acting as the second dimension. As the key to successful integration of CZE with MEKC, a new interface was designed and electroaccumulation focusing strategy was employed to avoid analyte band diffusion at the interface. The comprehensive 2‐D system was successfully established with only one high voltage and four electrodes. The grouping of two orthogonal separation techniques, together with analytes preconcentration techniques, significantly enhanced resolution and sensitivity for 2‐D separation of cationic compounds. The resulting electrophoregram was quite different from that of either single CZE or MEKC. Up to 14 000‐ to 35 000‐fold improvement in sensitivity was obtained relative to conventional electrokinetic injection method. The limits of detection (S/N=3) were in the range of 0.03–0.1 μg/L. The number of theoretical plates was in the range of 103 000–184 000. This method was successfully applied to the analysis of trace cationic cardiovascular drugs in wastewater.     

Separation of Sulfur Species in Water by Co-Electroosmotic Capillary Electrophoresis with Direct and Indirect UV Detection

Co-electroosmotic capillary electrophoresis (co-CZE) with both direct and indirect UV detection was investigated for the separation of sulfur species. With direct UV detection, the separation of S₂O^2? ₃, S₂O^2? ₄ was possible using 20 mM phosphate electrolyte containing 0.75 mM tetradecyltrimethylammonium bromide (TTAB) and 15% acetonitrile. To obtain optimal peak shape and sensitivity using indirect UV detection, a range of background electrolytes (BGEs), including benzoate, phthalate, 2,6-pyridinedicarboxylate (2,6-PDCA) and trimellitate, were examined as the BGEs. Of all the BGEs, 2,6-PDCA gave high selectivity and indirect UV response due to its mobility matching to that of sulfur species and its high absorptivity. Detection limits in range of 3-6 μM were obtained using either direct UV or indirect UV detection. The proposed CZE methods were used for the determination of sulfur species in water samples, and provided fast separation of sulfur species in less than 5 min.     

Capillary electrophoresis for the analysis of paralytic shellfish poisoning toxins in shellfish: Comparison of detection methods

Paralytic shellfish toxins (PSTs) are produced by marine and freshwater microalgae and accumulate in shellfish including mussels, oysters, and scallops, causing possible fatalities when inadvertently consumed. Monitoring of PST content of shellfish is therefore important for food safety, with currently approved methods based on HPLC, using pre‐ or postcolumn oxidation for fluorescence detection (HPLC‐FLD). CE is an attractive alternative for screening and detection of PSTs as it is compatible with miniaturization and could be implemented in portable instrumentation for on‐site monitoring. In this study, CE methods were developed for C⁴D, FLD, UV absorption detection, and MS—making this first report of C⁴D and FLD for PSTs detection. Because most oxidized toxins are neutral, MEKC was used in combination with FLD. The developed CZE‐UV and CZE‐C⁴D methods provide better resolution, selectivity, and separation efficiency compared to CZE‐MS and MEKC‐FLD. The sensitivity of the CZE‐C⁴D and MEKC‐FLD methods was superior to UV and MS, with LOD values ranging from 140 to 715 ng/mL for CZE‐C⁴D and 60.9 to 104 ng/mL for MEKC‐FLD. With the regulatory limit for shellfish samples of 800 ng/mL, the CZE‐C⁴D and MEKC‐FLD methods were evaluated for the screening and detection of PSTs in shellfish samples. While the CZE‐C⁴D method suffered from significant interferences from the shellfish matrix, MEKC‐FLD was successfully used for PST screening of a periodate‐oxidized mussel sample, with results confirmed by HPLC‐FLD. This confirms the potential of MEKC‐FLD for screening of PSTs in shellfish samples.     

Simultaneous Determination of Atenolol and Chlorthalidone in Pharmaceutical Preparations by Capillary-Zone Electrophoresis

Abstract

A capillary zone electrophoresis (CZE) method for the simultaneous determination of the β-blocker drugs atenolol and chlorthalidone in pharmaceutical formulations has been developed. The CZE separation was performed under the following conditions: capillary temperature, 25°C; applied voltage, 25 kV; 20 mM H₃PO₄–NaOH running buffer (pH 9.0); and detection wavelength, 198 nm. Phenobarbital was used as internal standard. The method was validated and showed not only good precision and accuracy but also good robustness. The method has been successfully applied to the simultaneous determination of both atenolol and chlorthalidone in pharmaceutical tablets.     

Development of a CE‐MS method for the study of riociguat and metabolite M1 in pharmaceutical analysis

Riociguat is a novel antihypertensive drug for the treatment of pulmonary hypertension. We present electrophoretic characterization, i.e. migration behavior of riociguat and metabolite M1 as support for optimized CZE/MS assay. Fundamental separation parameters, such as peak width, symmetry, and resolution are studied in a series of ammonium formate buffers within pH range 2.60–5.61. The narrow region of peak symmetry lies close to pH 4.0 for both analytes. Accordingly, the value of resolution maximizes in a background electrolyte adjusted to pH 4.10. Basic calibration parameters estimated from CZE experiments with absorption photometric and mass spectrometric detection of riociguat and metabolite M1 were evaluated. More than three orders lower LOD was achieved with high resolution mass spectrometric detection. The observed difference in the sensitivity of both detection techniques gives priority to the utilization of CZE/MS in practice. The values of dissociation constants of riociguat and metabolite M1, pK_BH, were determined from CZE measurements in lithium formate and lithium acetate background electrolytes with constant ionic strength. The value of pK_BH = 4.30 ± 0.02 for riociguat corresponds well to the value already presented in the literature. According to our observation, metabolite M1 behaves like a slightly stronger base with estimated pK_BH = 4.40 ± 0.02.     

TLC Based Method for Standardization of Pongamia pinnata (Karanj) Using Karanjin as Marker

Pongamia pinnata Linn. (Papilionaceae) seeds have gained great commercial and industrial importance owing to their high oil content. Presently, there is no appropriate TLC based method available for standardization of P. pinnata. A simple, robust and reproducible TLC method for the determination of Karanjin is reported in the seeds of P. pinnata. The method involves separation of components by TLC on pre-coated silica gel G 60 F₂₅₄ plates developed on toluene: ethyl acetate (7:3 v/v) and detection at 260 nm in absorbance mode. The sensitivity of the method was found to be 100 ng. The linearity range was 50–300 ng. Four samples of P. pinnata from different geographical locations were tested for their karanjin content using the developed method. The proposed method was found to be robust, precise, and accurate, it therefore holds potential for detection, monitoring and quantification of karanjin in Pongamia pinnata.

     

Rapid Simultaneous Determination of Four Alkaloids in Lotus Plumule by CZE with Ephedrine Hydrochloride as an Internal Standard

CE offers the possibility of fast, cheap and reproducible separations for active compounds of Chinese herbs. Lotusine (1), liensinine (2), isoliensinine (3) and neferine (4) were the major bioactive alkaloids in lotus plumule, which was used as an important Chinese herb. In this paper, simultaneous separation of 1–4 in lotus plumule by nonaqueous CZE has been achieved within 11 min by use of buffer consisting of 80 mM sodium acetate and 40 mM ammonium acetate methanol solution of pH 5.4. Analysis of the four alkaloids in ten plumule samples of Nelumbo nucifera was conducted. Limits of detection (LOD) of 1–4 by UV absorbance at 203 nm were achieved in the range of 1.5–2.8 μg mL⁻¹. Reproducibility (percent RSD) of the analysis by CZE were 2.33, 2.31, 0.78 and 2.58 %, respectively (n = 5).

     

Application of Capillary Zone Electrophoresis for the Analysis of Low Molecular Weight Organic Acids in Environmental Samples

Abstract

The applicability of a recently developed capillary zone electrophoretic (CZE) method for the determination of low molecular weight (LMW) organic acids in water was tested on five types of environmental samples (rainwater, water extract from peat, and soil water from two polluted sites). A full baseline resolved separation of fourteen commonly found LMW carboxylic acids in natural waters (malonic, oxalic, fumaric, maleic, formic, succinic, tartaric, glutaric, adipic, acetic, propionic, butyric, valeric and citric acids), was achieved within eight minutes. The limits of detection (2 X noise) were in the ranges 90–200 μg/l and 0.5 – 5 μg/l for hydrodynamic and electrokinetic injection, respectively. Two different CZE systems, a Waters Quanta 4000 and a Hewlett Packard HP ^3DCE system, were used and their performance compared.     

毛细管区带电泳技术快速分离检测爆炸残留物中的无机离子

利用间接紫外毛细管区带电泳方法完成了对爆炸残留物中7种无机离子(K+,NH+4,NO-2,NO-3,SO2-4,ClO-3,ClO-4)的分离检测。阳离子测定采用的缓冲体系为10 mmol/L吡啶（pH 4.5）-3 mmol/L冠醚,K+和NH+4在2.6 min内达到基线分离,检出限分别为0.25 mg/L和0.10 mg/L(S/N=3)。阴离子测定采用的缓冲体系为40 mmol/L硼酸-1.8 mmol/L重铬酸钾-2 mmol/L硼酸钠（pH 8.6）,氢氧化四甲铵为电渗流改性剂,5种阴离子在4.6 min内达到基线分离,检出限为0.10～1.85 mg/L。该方法已成功地应用于实际爆炸物样品种类的判定分析,取得了很好的结果。     

CZE and ESI-MS of Borate-Sugar Complexes

Capillary zone electrophoresis (CZE) with electrospray ionization (ESI) mass spectrometry (MS) was used to study borate (B^?1) and sugar (L) complexes (L _x B^?1). Boric acid was adjusted to pH 10 with ammonium hydroxide to create an ESI-MS compatible CZE background electrolyte. We show for the first time that the electrophoretic peaks for each injected sugar contained both the substrates (i.e., sugar and/or multimers) and products (i.e., L _x B^?1). The effects of sheath liquid, temperature, and borate concentration were studied. The molecular mass information obtained from the ESI-MS provided new evidence on the mechanisms of borate-sugar complexation. Direct infusion ESI-MS and CZE-ESI-MS experiments strongly suggest that the formation of L _x B^?1 was from the direct reaction of a sugar or sugar multimer (L _x ) and B^?1. Larger L _x B^?1, where x > 2 were observed. Separation in the CZE dimension allows for the simultaneous analysis of a sugar mixture and simplified the ESI-MS analysis of sugars of the same molecular mass. The increase in sugar electrophoretic mobility caused by the increase in borate concentration was discussed in terms of the formation of L _x B^?1 complexes. In addition, the separation of five nucleosides by CZE using a borate electrolyte and detection using ESI-MS is demonstrated.     

The Rapid Determination of Neutral Sugars in Biological Samples by High-Performance Liquid Chromatography

Abstract

A procedure for the analysis of neutral sugars in biological specimens is described. The method entails acid hydrolysis of the sample to liberate monosaccharides, which are subsequently derivatized with dansyl hydrazine. The sugar-dansyl hydrazones are separated and quantitated by hplc on a 5μ C18 RadialPak column with a gradient of acetonitrile in 10mM ammonium sulfate at pH 7. Fluorescent detection of the derivatized sugars permits 100-fold increased sensitivity compared to previously published glc methods.

This procedure was applied to the neutral sugar analysis of a glycoprotein of known composition (thyroglobulin) and to hard keratin fibers. The latter substance served as a model to critically evaluate the method on a highly resistant biological matrix containing low concentrations of neutral sugars.     

Ultramicro Analysis of Reducing and Non-Reducing Sugars by Liquid Chromatography

Abstract

A post-column detection system for ultramicro amount of sugars has been developed using taurocyamine as the labelling reagent. Less than 10 pmol of reducing sugars were determined by this HPLC system. Non-reducing sugars were detected by the addition of periodate to the reagent.

Modification of the reaction reagent components made this detection system feasible to apply to various methods for separation of carbohydrates using pure water, acetonitrile/water mixtures, borate buffer or aqueous sodium hydroxide as the eluent.     

CZE Determination of Mismatched Double-Stranded Oligonucleotides (poly I:poly C12U) in Beagle Serum

A capillary zone electrophoretic (CZE) method with diode-array detection has been established for analysis of mismatched double-stranded oligonucleotides, poly I:poly C₁₂U, in beagle serum. The effects of sample pretreatment, buffer pH, buffer concentration, and applied voltage on the separation of inosine were optimized. Baseline separation was obtained for inosine within 11 min by use of 0.05 mol L⁻¹ borate running buffer, pH 9.60, and an applied voltage of 25 kV at 25 °C; the detection wavelength was 254 nm. To evaluate the performance of the method and demonstrate the utility of the approach, an experiment was designed in which poly I:poly C₁₂U were added to serum at different concentrations, artificially creating groups of samples. The proposed CZE method seemed a powerful technique for kinetic study of poly I:poly C₁₂U in serum.