Inside Cover: Effect of Brønsted/Lewis Acid Ratio on Conversion of Sugars to 5‐Hydroxymethylfurfural over Mesoporous Nb and Nb‐W Oxides (Chin. J. Chem. 10/2017)

The inside cover picture shows the excellent catalytic performance of mesoporous Nb and Nb‐W oxides catalysts for the conversion of glucose to 5‐hydroxymethylfurfural. The catalytic activity and selectivity for all Nb‐W oxides vary according to the ratio of Brønsted to Lewis acid sites. The highest HMF selectivity of 52% was achieved over Nb₇W₃ oxide catalyst. More details are discussed in the article by He et al. on page 1529–1539.

     

Characterization of Thermally Stable Brønsted Acid Sites on Alumina‐Supported Niobium Oxide after Calcination at High Temperatures

Thermally stable Brønsted acid sites were generated on alumina‐supported niobium oxide (Nb₂O₅/Al₂O₃) by calcination at high temperatures, such as 1123 K. The results of structural characterization by using Fourier‐transform infrared (FTIR) spectroscopy, TEM, scanning transmission electron microscopy (STEM), and energy‐dispersive X‐ray (EDX) analysis indicated that the Nb₂O₅ monolayer domains were highly dispersed over alumina at low Nb₂O₅ loadings, such as 5 wt %, and no Brønsted acid sites were presents. The coverage of Nb₂O₅ monolayer domains over Al₂O₃ increased with increasing Nb₂O₅ loading and almost‐full coverage was obtained at a loading of 16 wt %. A sharp increase in the number of hydroxy groups, which acted as Brønsted acid sites, was observed at this loading level. The relationship between the acidic properties and the structure of the material suggested that the bridging hydroxy groups (Nb? O(H)? Nb), which were formed at the boundaries between the domains of the Nb₂O₅ monolayer, acted as thermally stable Brønsted acid sites.     

Phosphonate‐Modified UiO‐66 Brønsted Acid Catalyst and Its Use in Dehydra‐Decyclization of 2‐Methyltetrahydrofuran to Pentadienes

Phosphorus‐modified all‐silica zeolites exhibit activity and selectivity in certain Brønsted acid catalyzed reactions for biomass conversion. In an effort to achieve similar performance with catalysts having well‐defined sites, we report the incorporation of Brønsted acidity to metal–organic frameworks with the UiO‐66 topology, achieved by attaching phosphonic acid to the 1,4‐benzenedicarboxylate ligand and using it to form UiO‐66‐PO₃H₂ by post‐synthesis modification. Characterization reveals that UiO‐66‐PO₃H₂ retains stability similar to UiO‐66, and exhibits weak Brønsted acidity, as demonstrated by titrations, alcohol dehydration, and dehydra‐decyclization of 2‐methyltetrahydrofuran (2‐MTHF). For the later reaction, the reported catalyst exhibits site‐time yields and selectivity approaching that of phosphoric acid on all‐silica zeolites. Using solid‐state NMR and deprotonation energy calculations, the chemical environments of P and the corresponding acidities are determined.     

The Significance of Lewis Acid Sites for the Selective Catalytic Reduction of Nitric Oxide on Vanadium‐Based Catalysts

The long debated reaction mechanisms of the selective catalytic reduction (SCR) of nitric oxide with ammonia (NH₃) on vanadium‐based catalysts rely on the involvement of Brønsted or Lewis acid sites. This issue has been clearly elucidated using a combination of transient perturbations of the catalyst environment with operando time‐resolved spectroscopy to obtain unique molecular level insights. Nitric oxide reacts predominantly with NH₃ coordinated to Lewis sites on vanadia on tungsta–titania (V₂O₅‐WO₃‐TiO₂), while Brønsted sites are not involved in the catalytic cycle. The Lewis site is a mono‐oxo vanadyl group that reduces only in the presence of both nitric oxide and NH₃. We were also able to verify the formation of the nitrosamide (NH₂NO) intermediate, which forms in tandem with vanadium reduction, and thus the entire mechanism of SCR. Our experimental approach, demonstrated in the specific case of SCR, promises to progress the understanding of chemical reactions of technological relevance.     

Insight into Three‐Coordinate Aluminum Species on Ethanol‐to‐Olefin Conversion over ZSM‐5 Zeolites

Commercial bioethanol can be readily converted into ethylene by a dehydration process using solid acids, such as Brønsted acidic H‐ZSM‐5 zeolites, and thus, it is an ideal candidate to replace petroleum and coal for the sustainable production of ethylene. Now, strong Lewis acidic extra‐framework three‐coordinate Al³⁺ species were introduced into H‐ZSM‐5 zeolites to improve their catalytic activity. Remarkably, Al³⁺ species working with Brønsted acid sites can accelerate ethanol dehydration at a much lower reaction temperature and shorten the unsteady‐state period within 1–2 h, compared to >9 h for those without Al³⁺ species, which can significantly enhance the ethanol dehydration efficiency and reduce the cost. The reaction mechanism, studied by solid‐state NMR, shows that strong Lewis acidic EFAl‐Al³⁺ species can collaborate with Brønsted acid sites and promote ethanol dehydration either directly or indirectly via an aromatics‐based cycle to produce ethylene.     

Synthesis of ϵ‐Caprolactam from Cyclohexanone Oxime Using Zeolites Hβ, HZSM‐5, and Alumina Pillared Montmorillonite

The Beckmann rearrangement of cyclohexanone oxime (CHO) to ?‐caprolactam (?‐C) was studied in a plug flow reactor at 300–400°C under atmospheric pressure by using Hβ, ZSM‐5, and alumina pillared montmorillonite. With Hβ(X) Y zeolites, raising the SiO₂/Al₂O₃ molar ratio (X) results in the enhancement of catalyst acid strength with concomitant decrease of the total acid amount. In creasing the calcination temperature (Y) causes remarkable diminution of catalyst surface area, acid strength, and acid amount. A similar trend was found for AlPMY catalysts. In there action of CHO, the initial catalytic activity correlates well with the total acid amount of various catalysts except for Hβ(10) Y (Y > 600°C). The reaction proceeds on both Brönsted and Lewis acid sites and the catalyst deactivation most likely occurs at the strong Brönsted acid sites. The effect of solvents in the feed on the catalytic results was also investigated; it was found that polar solvents such as ethanol or n‐butanol give high ?‐C yield and longer catalyst life time. In the reaction of CHO/C₂H₅OH over Hβ(10)800 at 400°C and W/F 74.6 gh/mol, the CHO conversion and ?‐C yield remain 100% and 92%, respectively, for at least 20 h time‐on‐stream. The reaction paths and the mechanism for ?‐C formation are proposed.     

Effect of Lewis and Brønsted acids on the homopolymerization of acrylates and their copolymerization with 1‐alkenes

The first copolymerization of acrylate and methacrylate with nonpolar 1‐alkenes in the presence of Brønsted acids as complexation agents has been reported. The addition of both homogeneous and heterogeneous Brønsted acids resulted in increased monomer conversion and 1‐alkene incorporation. Further, the heterogeneous Brønsted acids can be recycled without loss of activity. A direct correlation exists between the ability of the Lewis or Brønsted acid to bind to the ester group of the acrylate/methacrylate monomer and its ability to promote the copolymerization reaction. For Lewis acids, there is also a direct correlation between the charge/size ratio at the metal center and their ability to promote copolymerizations. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5499–5505, 2008     

A Gold‐ and Brønsted Acid Catalytic Interplay Towards the Synthesis of Highly Substituted Tetrahydrocarbazoles

The reaction of indoles and stabilized cyclopropyl alkynes under gold‐ and/or gold & Brønsted acid‐catalysis provided access to highly substituted tetrahydrocarbazoles. A mechanistic study revealed the complex mechanism underlying these processes and the opportunistic cooperation of Lewis and Brønsted acid‐catalysts towards the formation of complex molecular scaffolds.     

"Designer acids": combined acid catalysis for asymmetric synthesis

Lewis and Brønsted acids can be utilized as more‐effective tools for chemical reactions by sophisticated engineering (“designer acids”). The ultimate goal of such “designer acids” is to form a combination of acids with higher reactivity, selectivity, and versatility than the individual acid catalysts. One possible way to take advantage of such abilities may be to apply a “combined acids system” to the catalyst design. The concept of combined acids, which can be classified into Brønsted acid assisted Lewis acid (BLA), Lewis acid assisted Lewis acid (LLA), Lewis acid assisted Brønsted acid (LBA), and Brønsted acid assisted Brønsted acid (BBA), can be a particularly useful tool for the design of asymmetric catalysis, because combining such acids will bring out their inherent reactivity by associative interaction, and also provide more‐organized structures that allow an effective asymmetric environment.     

Synergic Effect of Active Sites in Zinc‐Modified ZSM‐5 Zeolites as Revealed by High‐Field Solid‐State NMR Spectroscopy

Understanding the nature of active sites in metal‐supported catalysts is of great importance towards establishing their structure–property relationships. The outstanding catalytic performance of metal‐supported catalysts is frequently ascribed to the synergic effect of different active sites, which is however not well spectroscopically characterized. Herein, we report the direct detection of surface Zn species and ¹H–⁶⁷Zn internuclear interaction between Zn²⁺ ions and Brønsted acid sites on Zn‐modified ZSM‐5 zeolites by high‐field solid‐state NMR spectroscopy. The observed promotion of C?H bond activation of methane is rationalized by the enhanced Brønsted acidity generated by synergic effects arising from the spatial proximity/interaction between Zn²⁺ ions and Brønsted acidic protons. The concentration of synergic active sites is determined by ¹H–⁶⁷Zn double‐resonance solid‐state NMR spectroscopy.     

The synthesis of metal–organic framework Al‐MIL‐53‐derived Brønsted acid catalyst and its application in the Mannich reaction

A metal–organic framework Al‐MIL‐53‐NH₂‐derived Brønsted acid catalyst (Al‐MIL‐53‐RSO₃H) has been synthesized employing a post‐synthetic modification strategy under mild conditions. The Al‐MIL‐53‐RSO₃H catalyst was successfully utilized in the nitro‐Mannich reaction taking advantage of its strong Brønsted acidity. Good to excellent yields of Mannich adducts were achieved for a variety of acylimine substrates in the presence of 0.1 mol% Al‐MIL‐53‐RSO₃H. Furthermore, the Al‐MIL‐53‐RSO₃H catalyst can be recycled five times without decreasing the yield and selectivity of Mannich adducts.     

Brønsted Acid Mediated Novel Rearrangements of Diarylvinylidenecyclopropanes and Mechanistic Investigations Based on DFT Calculations

Diarylvinylidenecyclopropanes undergo a novel rearrangement in the presence of the Brønsted acid Tf₂NH (Tf: trifluoromethanesulfonyl) to give the corresponding naphthalene derivatives in good to high yields upon heating, whereas in the presence of the Brønsted acid toluene‐4‐sulfonic acid (p‐TSA), the corresponding triene derivatives are afforded in moderate to good yields under mild conditions. Corresponding mechanistic studies on the basis of density functional theory (DFT) with the Gaussian03 program by using the B3LYP method have revealed that the pK_a value of the Brønsted acid, as well as the entropy and solvent effects, plays a significant role in this reaction; these factors can discriminate the differences in the reactivity and regioselectivity among the Brønsted acids used in this reaction. In the presence of Lewis acid Sn(OTf)₂, a butatrienecyclopane can produce the corresponding ring‐opened products in moderate yields.     

Direct Detection of Supramolecular Reaction Centers in the Methanol‐to‐Olefins Conversion over Zeolite H‐ZSM‐5 by 13C–27Al Solid‐State NMR Spectroscopy

Hydrocarbon‐pool chemistry is important in methanol to olefins (MTO) conversion on acidic zeolite catalysts. The hydrocarbon‐pool (HP) species, such as methylbenzenes and cyclic carbocations, confined in zeolite channels during the reaction are essential in determining the reaction pathway. Herein, we experimentally demonstrate the formation of supramolecular reaction centers composed of organic hydrocarbon species and the inorganic zeolite framework in H‐ZSM‐5 zeolite by advanced ¹³C–²⁷Al double‐resonance solid‐state NMR spectroscopy. Methylbenzenes and cyclic carbocations located near Brønsted acid/base sites form the supramolecular reaction centers in the zeolite channel. The internuclear spatial interaction/proximity between the ¹³C nuclei (associated with HP species) and the ²⁷Al nuclei (associated with Brønsted acid/base sites) determines the reactivity of the HP species. The closer the HP species are to the zeolite framework Al, the higher their reactivity in the MTO reaction.     

Significant Influence of Zn on Activation of the C‐H Bonds of Small Alkanes by Brønsted Acid Sites of Zeolite

Herein, we analyze earlier obtained and new data about peculiarities of the H/D hydrogen exchange of small C₁–n‐C₄ alkanes on Zn‐modified high‐silica zeolites ZSM‐5 and BEA in comparison with the exchange for corresponding purely acidic forms of these zeolites. This allows us to identify an evident promoting effect of Zn on the activation of C? H bonds of alkanes by zeolite Brønsted sites. The effect of Zn is demonstrated by observing the regioselectivity of the H/D exchange for propane and n‐butane as well as by the increase in the rate and a decrease in the apparent activation energy of the exchange for all C₁–n‐C₄ alkanes upon modification of zeolites with Zn. The influence of Zn on alkane activation has been rationalized by dissociative adsorption of alkanes on Zn oxide species inside zeolite pores, which precedes the interaction of alkane with Brønsted acid sites.     

Synthesis and characterization of a novel organic–inorganic hybrid salt and its application as a highly effectual Brønsted–Lewis acidic catalyst for the production of N,N′‐alkylidene bisamides

In this research, a novel organic–inorganic hybrid salt, namely, N¹,N¹,N²,N²‐tetramethyl‐N¹,N²‐bis(sulfo)ethane‐1,2‐diaminium tetrachloroferrate ([TMBSED][FeCl₄]₂) was prepared and characterized by Fourier‐transform infrared spectroscopy (FT‐IR), energy‐dispersive X‐ray spectroscopy (EDX), elemental mapping, field emission scanning electron microscopy (FE‐SEM), X‐ray diffraction (XRD), thermal gravimetric (TG), differential thermal gravimetric (DTG), and vibrating‐sample magnetometry (VSM) analyses. Catalytic activity of the hybrid salt was tested for the synthesis of N,N′‐alkylidene bisamides through the reaction of benzamide (2 eq.) and aromatic aldehydes (1 eq.) under solvent‐free conditions in which the products were obtained in high yields and short reaction times. The catalyst was superior to many of the reported catalysts in terms of two or more of these factors: the reaction medium and temperature, yield, time, and turnover frequency (TOF). [TMBSED][FeCl₄]₂ is a Brønsted–Lewis acidic catalyst; there are two SO₃H groups (as Brønsted acidic sites) and two tetrachloroferrate anions (as Lewis acidic sites) in its structure. Highly effectiveness of the catalyst for the synthesis of N,N′‐alkylidene bisamides can be attributed to synergy of the Brønsted and Lewis acids and also possessing two sites of each acid.     

Acid/Vanadium‐Containing Saponite for the Conversion of Propene into Coke: Potential Flame‐Retardant Filler for Nanocomposite Materials

Vanadium‐containing saponite samples were synthesized in a one‐pot synthetic procedure with the aim of preparing samples for potential application as fillers for polymeric composites. These vanadium‐modified materials were prepared from an acid support by adopting a synthetic strategy that allowed us to introduce isolated structural V species (H/V‐SAP). The physicochemical properties of these materials were investigated by XRD analysis and by DR‐UV/Vis and FTIR spectroscopy of CO that was adsorbed at 100 K; these data were compared to those of a V‐modified saponite material that did not contain any Brønsted acid sites (Na/V‐SAP). The surface‐acid properties of both samples (together with the fully acidic H‐SAP material and the Na‐SAP solid) were studied in the catalytic isomerization of α‐pinene oxide. The V‐containing solids were tested in the oxidative dehydrogenation reaction of propene to evaluate their potential use as flame‐retardant fillers for polymer composites. The effect of tuning the presence of Lewis/Brønsted acid sites was carefully studied. The V‐containing saponite sample that contained a marked presence of Brønsted acid sites showed the most interesting performance in the oxidative dehydrogenation (ODH) reactions because they produced coke, even at 773 K. The catalytic data presented herein indicate that the H/V‐SAP material is potentially active as a flame‐retardant filler.     

Effect of Alkali Treatment of HY Zeolite on Continuous Synthesis of Triacetonamine

The continuous synthesis of triacetonamine from acetone and ammonia over HY was realized. Meanwhile, alkali‐treated HY with different structure and acidities were prepared and examined. The results indicated that the acid sites, especially Brønsted acid sites, played a vital role on the selectivity of triacetonamine and the conversion of acetone. It was further confirmed by X‐ray diffraction (XRD), N₂ adsorption and desorption experiments, IR spectra of adsorbed pyridine, and NH₃ temperature‐programmed desorption. Meanwhile, the generation mechanisms of triacetonamine and impurities were speculated.     

Phosphonate-Modified UiO-66 Brønsted Acid Catalyst and Its Use in Dehydra-Decyclization of 2-Methyltetrahydrofuran to Pentadienes

Phosphorus-modified all-silica zeolites exhibit activity and selectivity in certain Brønsted acid catalyzed reactions for biomass conversion. In an effort to achieve similar performance with catalysts having well-defined sites, we report the incorporation of Brønsted acidity to metal–organic frameworks with the UiO-66 topology, achieved by attaching phosphonic acid to the 1,4-benzenedicarboxylate ligand and using it to form UiO-66-PO₃H₂ by post-synthesis modification. Characterization reveals that UiO-66-PO₃H₂ retains stability similar to UiO-66, and exhibits weak Brønsted acidity, as demonstrated by titrations, alcohol dehydration, and dehydra-decyclization of 2-methyltetrahydrofuran (2-MTHF). For the later reaction, the reported catalyst exhibits site-time yields and selectivity approaching that of phosphoric acid on all-silica zeolites. Using solid-state NMR and deprotonation energy calculations, the chemical environments of P and the corresponding acidities are determined.     

Solvent Effects in Acid‐Catalyzed Biomass Conversion Reactions

Reaction kinetics were studied to quantify the effects of polar aprotic organic solvents on the acid‐catalyzed conversion of xylose into furfural. A solvent of particular importance is γ‐valerolactone (GVL), which leads to significant increases in reaction rates compared to water in addition to increased product selectivity. GVL has similar effects on the kinetics for the dehydration of 1,2‐propanediol to propanal and for the hydrolysis of cellobiose to glucose. Based on results obtained for homogeneous Brønsted acid catalysts that span a range of pK_a values, we suggest that an aprotic organic solvent affects the reaction kinetics by changing the stabilization of the acidic proton relative to the protonated transition state. This same behavior is displayed by strong solid Brønsted acid catalysts, such as H‐mordenite and H‐beta.     

Organometallic titanocene complex as highly efficient bifunctional catalyst for intramolecular Mannich reaction

Bifunctional catalysts bearing two catalytic sites, Lewis acidic organometallic titanocene and Brønsted acidic COOH, have been assembled in situ from Cp₂TiCl₂ with carboxylic acid ligands, showing high catalytic activity over an intramolecular Mannich reaction towards synthesis of 2‐aryl‐2,3‐dihydroquinolin‐4(1H)‐ones. The determination of the bifunctional catalyst Cp₂Ti(C₈H₄NO₆)₂ was elucidated by single X‐ray HR‐MS and investigation of catalytic behavior. In particular, masking the Brønsted acidic COOH catalytic site with dormant COOMe lowered the reaction yield greatly, indicating that two catalytic sites work together to maintain high catalytic efficiency.