N-三甲基硅基对甲苯磺酰胺与对甲苯磺酸酯的反应

报道了3-氧杂-1,5-二戊醇二对甲苯磺酸酯及1,4-丁二醇二对甲苯磺酸酯与N-三甲基硅基对甲苯磺酰胺在碱存在下反应分别得到N-对甲苯磺酰基吗啡啉和N-对甲苯磺酰基四氢吡咯这一新的有机硅胺与磺酸酯的反应,在相同条件下N-三甲基硅基-对甲苯磺酰胺与对甲苯磺酸甲酯反应后仅得到N-甲基对甲苯磺酰胺,对此反应提出了可能的反应途径。     

β-亚磺酰基-N,N-二正丁基丙酰胺的合成研究

利用过氧化氢氧化β-硫烷基-N,N-二正丁基丙酰胺合成了6个未见文献报道的β-亚磺酰基-N,N-二正丁基丙酰胺,并对产物进行了红外、氢核磁、质谱和元素分析等表征.最后用β-亚磺酰基-N,N-二正丁基丙酰胺进行了硝酸介质中萃取稀土离子的研究.     

新型含磺酰基α-氨基膦酸酯的合成

以N-对甲苯磺酰基乙二胺、取代醛、芳酮及亚磷酸酯为原料,采用“一锅煮”合成了一系列新型的含磺酰基的α-氨基磷酸酯,其结构经1H NMR,13C NMR,31P NMR和元素分析表征.     

IPrAuCl/AgOTf催化下合成N-磺酰基四氢吡咯类化合物

在IPrAuCl和AgOTf催化体系作用下,通过一系列磺酰胺和四氢呋喃类化合物反应,合成了N-磺酰基四氢吡咯类化合物,实现了五元氧杂环到氮杂环类化合物的转换.     

手性路易斯碱催化N-酰基烯胺不对称还原

首次利用手性哌啶酰胺类和叔丁基亚磺酰胺类路易斯碱催化三氯氢硅对N-酰基烯胺的不对称还原反应,以优良的收率(＞90%)和中等的对映选择性( 2%ee～36%ee)获得了相应的N-酰基手性胺产物.     

含吡啶环大环多胺的合成及其与Cu(Ⅱ)的络合行为

本文以2,6-二溴甲基吡啶和对甲苯磺酰胺钠盐合成含吡啶环大环多胺,得到了尚未见文献报道的含四个吡啶环的三十二环胺. 2,6-二溴甲基-吡啶与甲苯磺酰胺钠盐在无水乙醇回流温度下得到1,9,17,25-四甲苯磺酰基大环多胺.用浓硫酸脱去N-甲苯磺酰基化合物的甲苯磺酰基, 生成标题大环多胺化合物. 配体与Cu(Ⅱ)的络合由紫外吸收光谱测定. 实验结果表明配体确与Cu^2^+以1:2络合成为双核络合物.     

α-亚磺酰基-N,N-二取代酰胺的简便合成

合成了6个未见文献报道的α-亚磺酰基-N，N-二取代酰胺，比较了使用各种氧化剂将α-烷硫基-N，N-二取代酰胺氧化成目标分子的条件，从而提供了一条简捷的合成路线。     

区域选择性合成2-取代磺酰基亚肼基-3-全乙酰糖基-2,3-二氢噻唑及其表征、生物活性研究

以取代磺酰肼和糖基异硫氰酸酯反应,生成8种1-取代磺酰基-4-全乙酰糖基氨基硫脲,然后在ClCH2CHO/CH3COONa/DMF条件下关环,区域选择性地合成了一系列新型2-取代磺酰基亚肼基-3-全乙酰糖基-2,3-二氢噻唑.化合物3e的1H-13CHMBC谱图表明1-取代磺酰基-4-全乙酰糖基氨基硫脲与氯乙醛的缩合反应关环位置为氨基硫脲的N-4,而非N-2.所有新化合物的结构均经过1HNMR,13CNMR和元素分析确证,生物活性初步测定结果表明该类二氢噻唑化合物具有一定的除草活性.     

N-亚磺酰基脯胺酰胺催化N-芳基亚胺的不对称硅氢化还原反应

利用N-亚磺酰基脯胺酰胺类催化剂催化N-芳基亚胺的不对称硅氢化还原反应,收率24%～83%,对映体选择性75%～99%.     

N'-取代苯磺酰基N-(4,6-二取代均-三氮苯-2-基)乙二胺的合成

N-芳基磺酰乙二胺与三聚氰氯反应获得三个新缩合产物, 缩合产物再与醇钠反应得到六个N-取代苯磺酰基-N'-取代均三嗪基乙二胺衍生物, 所有化合物都表现出对植物生长的抑制作用, 可用于筛选除草剂.     

电喷雾质谱技术研究反应条件对三种含硫氨基酸自组装成肽的影响

研究了三氯氧磷辅助下3种含硫氨基酸的自组装成肽反应,利用电喷雾质谱技术,考察了反应时间、温度和溶剂对3种含硫氨基酸成肽反应的影响,比较了三氯氧磷辅助下3种含硫氨基酸成肽的反应活性.可为寡肽的合成提供一种新的方法.     

N-quaternary compounds—XXVIII : Circular dichroism of α-trimethylammonium acids

The dichroic absorption of α-trimethylammonium carboxylic acids has been compared with that of α-amino acids. The quaternary acids were synthesized by methylation of amino acids or by the Menschutkin reaction between bromo acids and trimethylamine. The stereochemical course in the Menschutkin reaction is discussed. Rate of racemisation in alkaline solution of the synthesized quaternary acids has been determined.     

癸二酸-二苯并-18-冠-6共聚物的合成

脂肪族二元羧酸与二苯并 １８ 冠 ６在多聚磷酸中进行酰基化反应，可以制得酮型冠醚聚合物，二元酸的分子链长度会影响聚合反应的难易程度．对聚合反应条件进行优化控制，可以制得分子量高、成膜性能良好的癸二酸 二苯并 １８ 冠 ６共聚物．     

Radical polymerization of di-n-butyl itaconate in the presence of Lewis acids

Intramolecular chain-transfer reaction takes place in polymerizations of itaconates at high temperatures and/or at low monomer concentrations. Polymerizations of di-n-butyl itaconate (DBI) were carried out at 60 °C in the presence of Lewis acids such as scandium trifluoromethansulfonate. Lewis acids hardly influenced the intramolecular chain-transfer reaction in bulk polymerizations. Polymerizations in methanol accompanied transesterification reaction catalyzed by Lewis acids. In polymerizations in toluene, catalytic amounts of Lewis acids were found to be effective in suppressing the intramolecular chain-transfer reaction. Lewis acids showed no significant influences on stereospecificity of polymerization, though isotactic-specificity increase in polymerizations of other acrylate monomers such as methyl methacrylate.     

环化橡胶光交联产物的降解动力学和十二烷基苯磺酸的增溶机理

本文研究了在烷基苯磺酸作用下,环化橡胶类感光性高分子光交联产物降解反应的动力学行为。测定了在链长不一的烷基苯磺酸作用下,降解反应的级数和降解反应的活化能,讨论了烷基的链长以及烷基链长不一的苯磺酸浓度对降解反应速率的影响,提出了降解反应的增溶机理,证实了十二烷基苯磺酸对环化橡胶类感光性高分子光交联产物的降解反应有较大的促进作用。     

Copoly(amide—ester)s from p-aminobenzoic and hydroxybenzoic acids by the direct polycondensation with diphenyl chlorophosphate and LiCl

The reaction promoted by diphenyl chlorophosphate (DPCP) and LiCl was found to be effectively used for the preparation of aromatic polyesters with high molecular weights directly from hydroxybenzoic acids when the condensing agent was added dropwise. The reaction was successfully to the direct polycondensation reaction of p-aminobenzoic and hydroxybenzoic acids, giving high-molecular-weight copoly(amide—ester)s soluble in amide or phenolic solvents. Copolycondensations of isophthalic and terephthalic acids with bisphenols and aromatic diamines were also examined by adding the DPCP solution to a mixture of these monomers or by initial reaction of DPCP with the acids followed by dropwise addition of a mixture of bisphenols and the diamines. The latter stepwise reaction gave random copolymers soluble in amide and phenolic solvents. Thermal properties of these copolymers were studied.     

Direct polyesterification with thionyl chloride in pyridine improved by a modification of monomer sequences in copolymers

The direct polyesterification with thionyl chloride (SOCl₂) in pyridine was further investigated. Copolycondensations of dicarboxylic acids, bisphenols, and hydroxybenzoic acids were significantly affected by the reaction temperatures and combinations of monomers which could change relative rates of alcoholyses of the activated dicarboxylic acids and the hydroxyacids consequently to vary monomer sequences in the copolymers resulted. The sequences were tried to be varied more directly by stepwise reactions of monomers in copolycondensations of dicarboxylic acids, bisphenols, and p-hydroxybenzoic acid (PHB), as well as PHB and m-hydroxybenzoic acid (MHB). The reactions proceeded smoothly and satisfactorily when carried out by initial reaction of dicarboxylic acids and PHB followed by bisphenols likely to favor sequential to random distributions of monomers. Reverse addition of PHB and bisphenols, and then dicarboxylic acids resulted in rapid precipitation due to some oligomerization of PHB at an earlier stage of reaction, and largely retarded the reaction. This was also the case for the copolycondensation of PHB and MHB. Copolymers of high inherent viscosities with up to 65 mol% PHB could be obtained by initial reaction of MHB followed by PHB.     

Direct polyesterification with thionyl chloride in pyridine improved by a modification of monomer sequences in copolymers

The direct polyesterification with thionyl chloride (SOCl₂) in pyridine was further investigated. Copolycondensations of dicarboxylic acids, bisphenols, and hydroxybenzoic acids were significantly affected by the reaction temperatures and combinations of monomers which could change relative rates of alcoholyses of the activated dicarboxylic acids and the hydroxyacids consequently to vary monomer sequences in the copolymers resulted. The sequences were tried to be varied more directly by stepwise reactions of monomers in copolycondensations of dicarboxylic acids, bisphenols, and p-hydroxybenzoic acid (PHB), as well as PHB and m-hydroxybenzoic acid (MHB). The reactions proceeded smoothly and satisfactorily when carried out by initial reaction of dicarboxylic acids and PHB followed by bisphenols likely to favor sequential to random distributions of monomers. Reverse addition of PHB and bisphenols, and then dicarboxylic acids resulted in rapid precipitation due to some oligomerization of PHB at an earlier stage of reaction, and largely retarded the reaction. This was also the case for the copolycondensation of PHB and MHB. Copolymers of high inherent viscosities with up to 65 mol % PHB could be obtained by initial reaction of MHB followed by PHB.     

Tetramic acids and indole derivatives from amino acid β-keto esters. Fine-tuning the conditions of the key Cu-catalyzed reaction

1,3,5-Trisubstituted tetramic acids and 2,3-disubstituted indole derivatives were prepared from β-keto esters derived from amino acids by their reaction with iodophenyl-2-trifluoroacetylamine under Cu-catalysis. Both heterocyclic systems were generated from the same starting materials by choice of the appropriate reaction conditions.     

Site-selective Suzuki cross-coupling reactions of 2,3-dibromobenzofuran

The Suzuki-Miyaura reaction of 2,3-dibromobenzofuran with two equivalents of boronic acids gave 2,3-diarylbenzofurans. The reaction with one equivalent of arylboronic acids resulted in site-selective formation of 2-aryl-3-bromobenzofurans. 2,3-Diarylbenzofurans containing two different aryl groups were prepared from 2,3-dibromobenzofuran in a one-pot protocol by sequential addition of two different boronic acids.