对甲苯磺酸铜及其配合物电化学行为研究(英文)

本文合成了对甲苯磺酸铜,并应用热重(TG)和差示扫描量热法(DSC)进行分析.该铜盐容易脱除全部结晶水,且在空气中不潮解,如与乙醇胺形成等摩尔配合物,则在DMSO和DMF溶剂中能催化1,1′ 联 2 萘酚的氧化,但在H2O或CH3OH溶剂中则不发生反应.此外,还分别研究了该铜盐及其它铜盐与乙醇胺(1∶1)的配合物在DMSO、DMF、CH3OH和H2O中的电化学行为和催化活性.实验表明,铜胺配合物的两步单电子还原过程对催化氧化1,1′ 联 2 萘酚是必要的条件.     

对乙酰氨基苯甲酸和含氮配体构筑铜、锌配合物的合成、结构及性质研究(英文)

利用对乙酰氨基苯甲酸(HPABA)和邻菲咯啉(phen)、硝酸铜在DMF/CH3OH/H2O溶液中合成了单核铜配合物[Cu(PABA)(phen)(H2O)2]·(NO3)·H2O(1),然后又和4,4′-联吡啶(4,4′-bpy)、硝酸锌在DMF/CH3OH/H2O溶液中获得配位聚合物{[Zn(PABA)2(4,4′-bpy)]·4H2O}n(2)。根据X射线衍射分析结果,配合物1中每个铜离子周围有2个氮原子和3个氧原子与之配位形成畸变的四方锥配位构型,然而在配合物2中,六配位八面体构型的锌离子通过配体4,4′-联吡啶扩展为一维Zigzag型链。分别对这两个配合物的热稳定性和电化学性质进行了研究。     

溶剂对三(苯并咪唑-2-甲基)胺和间苯二胺四乙酸的铜配合物晶体结构的影响

本文利用三(苯并咪唑-2-甲基)胺和间苯二胺四乙酸为配体与硝酸铜在CH3COCH3/CH3OH/H2O混合溶液中反应得到配合物[Cu(ntb)(H2mpda)].0.5CH3COCH3.2H2O(1),在DMF/CH3OH/H2O混合溶液中反应得到配合物[Cu(ntb)(H2mpda)].DMF.CH3OH.2H2O(2)(ntb=三(苯并咪唑-2-甲基)胺,H4mpda=间苯二胺四乙酸)。2个配合物的中心的铜离子分别与1个ntb配体的4个氮原子和1个H2mpda的氧原子配位形成三角双锥的配位构型。受溶剂的影响,配合物中配体的相对位置和构象有较大的区别,配合物2的配位构型更加扭曲。两个配合物均通过氢键连接形成不同的复杂三维网络。     

Cu(II)在对甲苯磺酸铜＋DMSO中的电还原

制备了对甲苯磺酸铜并首次用于电化学实验.差示扫描量热和热重曲线测定表明，对甲苯磺酸铜结晶容易脱除全部结晶水，无水盐在空气中不潮解.用循环伏安曲线、计时电流曲线和恒电流电解后的电位-时间曲线研究Cu(Ⅱ)在二甲基亚砜(DMSO)溶液中的电还原.结果表明, Cu(II)电还原为Cu的反应分两步进行，其中第一步是可逆过程.测定了Cu(II)在DMSO溶液中的扩散系数.     

Effect of Solvents on Oxidation of 1, 1′-Bi-2-naphthol

A novel biomimetic catalyst of complex Cu (p-OTs)2/ethanolamine (1 : 1 ) was used to oxidize 1, 1′-bi-2naphthol into xanthene derivatives with a relative high yield in a mixed solvents of dimethyl sulfoxide (DMSO) and CH3OH. The studies on the effect of some solvents on the yield of xanthene derivatives indicates that the yield reduces dramatically with the increase of the content of H2O in the mixed solvents of H2O and DMSO. No product can be obtained when the content of H2O is up to 70%. The cyclic voltammetric study demonstrated that the copper ion in complex Cu(p-OTs)2/ethanolamine(1:1) is reduced via a twostep one-electron reduction process from Cu (Ⅱ) to Cu in the mixture of DMSO and H2O. Water as a poor solvent in respect to the reactants probably hampered the coordination of 1, 1′-bi-2-naphthol to copper/amine complex and led to the insufficient catalytic efficiency of complex Cu(p-OTs),/ethanolamine(1:1).     

Effect of Solvents on Oxidation of 1,1′-Bi-2-naphthol

A novel biomimetic catalyst of complex Cu(p-OTs)2/ethanolamine(1∶1) was used to oxidize 1,1′-bi-2-naphthol into xanthene derivatives with a relative high yield in a mixed solvents of dimethyl sulfoxide(DMSO) and CH3OH. The studies on the effect of some solvents on the yield of xanthene derivatives indicates that the yield reduces dramatically with the increase of the content of H2O in the mixed solvents of H2O and DMSO. No product can be obtained when the content of H2O is up to 70%. The cyclic voltammetric study demonstrated that the copper ion in complex Cu(p-OTs)2/ethanolamine(1∶1) is reduced via a two-step one-electron reduction process from Cu(Ⅱ) to Cu in the mixture of DMSO and H2O. Water as a poor solvent in respect to the reactants probably hampered the coordination of 1,1′-bi-2-naphthol to copper/amine complex and led to the insufficient catalytic efficiency of complex Cu(p-OTs)2/ethanolamine(1∶1).     

CO2在Cu表面还原成碳氢化合物的DFT计算研究

应用密度泛函理论（DFT）反应能计算及最小能量路径分析研究了CO2在气相和电化学环境中于Cu(111)单晶表面的还原过程。气相中,CO2还原为碳氢化合物的反应路径可能为：CO2(g) + H* → COOH* → (CO +OH)* → CHO*;CHO + H* → CH2O* → (CH2 + O)*;CH2* + 2H* → CH4或2CH2* → C2H4。整个反应由CO2(g) + H* → COOH* → (CO +OH)*,(CO + H)* → CHO*和CH2O* → (CH2 + O)*等几个步骤联合控制。在-0.50V (vs RHE) 以正的电势下,CO2在Cu(111)表面电化学还原主要形成HCOO-和CO吸附物;随着电势逐渐负移,CO2加氢解离形成CO的反应越来越容易,CO成为主要产物;随电势进一步变负,形成碳氢化合物的趋势逐渐变强。与CO2的气相化学还原不同的是,电化学环境下CO质子化形成的CHO中间体倾向于解离形成CH,而在气相中CHO中间体则倾向于进一步质子化形成CH2O中间体。     

钴（Ⅱ）和铜（Ⅱ）膦酸配位聚合物的热、磁性能

3-氨基-1-羟基丙叉-1,1-二膦酸与钴或铜离子的水热反应得到新的配聚物Co2(NH3CH2CH2C(OH)(PO3)(PO3H))2·2H2O (1) 和Cu3{[NH3CH2CH2C(OH)(PO3)2](H2O)2} (2).研究了两个配合物的热稳定性,采用变温磁化率研究了在5-300 K范围内的磁性能. 结果表明:在配合物1中,钴离子间存在着弱的反铁磁偶合作用,理论拟合值为J=-2.1 cm-1,g=2.18;配合物2中,铜离子间的磁作用较复杂.     

Cu-Ni/Zn催化剂甲醇裂解机理原位XPS研究

利用原位XPS 和TPD MS 技术研究了Cu Ni/Zn催化剂在甲醇裂解反应中的机理和活性中心.TPD MS脱附产物中仅检测到CH3OH、H2和CO,而未发现CH4和CH3OCH3、HCOOCH3等其它含氧物种,说明在CH3OH裂解过程中仅包括O－H、C－H键的断裂,而不存在C－O键的断裂过程.In situ XPS的研究发现,在反应温度升高到200 ℃以上时,Cu/Zn催化剂中的Zn明显被还原,反映出Cu/Zn催化剂失活过程的Cu Zn合金生成过程,而在Cu Ni/Zn催化剂中未观察到Zn的还原,且表面出现Cu＋/Cu0共存的现象.Cu＋和Cu0很可能共同构成催化剂表面的活性中心,Cu＋应该是在甲醇裂解反应过程中形成的中间态.产物氢从Cu Ni/Zn 催化剂表面脱附为反应的控速步骤.     

Ag/Al2O3催化乙醇和甲醚选择性还原NOx反应机理的原位红外光谱研究

 尽管C2H5OH和CH3OCH3是同分异构体,但在以Ag/Al2O3为催化剂选择性催化还原NOx时,还原剂C2H5OH比CH3OCH3具有更高的活性. 原位漫反射红外光谱研究表明, C2H5OH和CH3OCH3在还原NOx反应过程中分别遵循不同的反应机理: 在Ag/Al2O3催化C2H5OH还原剂选择性还原NOx的反应过程中,烯醇式物种(RCH=CH-O-)和NO-3物种是主要的反应中间体,二者相互反应性能很强,可以生成反应关键中间体异氰酸酯(-NCO)表面吸附物种,因此NOx的去除率很高; 而在Ag/Al2O3催化CH3OCH3还原剂选择性还原NOx的反应过程中,甲酸盐(HCOO-)物种和NO-3物种是主要的反应中间体,二者之间反应生成-NCO 的活性较弱,因而NOx的去除率较低.     

Self-assembly of unprecedented [8+12] Cu-metallamacrocycle-based 3D metal-organic frameworks

[8+12]-metallamacrocycle-based 3D frameworks {[Cu(4)(pbt)(2)(SO(4))(2)(DMF)(2)(CH(3)OH)]·7H(2)O·DMF}(n) (1) and [12]-macrocycle 3D {[Cu(2)(pbt)(SO(4))(DMSO)(CH(3)OH)(2)]·5H(2)O·CH(3)OH}(n) (2) have been obtained. Both complexes display antiferromagnetic couplings and high catalytic activity in the oxidative coupling reaction of 1-ethynylbenzene and oxazolidin-2-one.     

Modeling Tyrosinase Monooxygenase Activity. Spectroscopic and Magnetic Investigations of Products Due to Reactions between Copper(I) Complexes of Xylyl-Based Dinucleating Ligands and Dioxygen: Aromatic Ring Hydroxylation and Irreversible Oxidation Products

A full account of a chemical system possessing features that mimic the reactivity aspects of tyrosinase is presented. Using dinucleating ligands with a m-xylyl spacer three new dicopper(I) complexes have been synthesized and their reactivity with dioxygen investigated. The six-membered chelate ring forming ligands provide only two nitrogen coordinations to each copper. The complexes [Cu(I)(2)L(CH(3)CN)(2)]X(2) (X = ClO(4)(-) (1a), SbF(6)(-) (1b)) and [Cu(I)(2)(L-NO(2))(CH(3)CN)(2)][SbF(6)](2) (1c) [L = alpha,alpha'-bis[N-methyl-N-(2-pyridylethyl)amino]-m-xylene; L-NO(2) = para-nitro derivative of L] have been characterized by IR and (1)H NMR spectroscopy. The reaction of O(2) with 1a-c in CH(2)Cl(2) or THF is instantaneous and causes stoichiometric xylyl hydroxylation reactions producing phenol products. Thus 1a produces phenoxo-/hydroxo-bridged product [Cu(II)(2)(L-O)(OH)][ClO(4)](2) (2a). The existence of putative peroxo-dicopper(II) species could not be detected even at -80 degrees C. A trend is observed for the extent of aromatic ring hydroxylation (298 K): CH(3)CN approximately DMF > CH(3)OH > CH(2)Cl(2). Cyclic voltammetric experiment of 1a in DMF reveals an appreciably low redox potential (E(1/2) = -0.26 V vs SCE) for the Cu(II)(2)/Cu(I)(2) redox process. Variable-temperature (25-300 K) magnetic susceptibility measurements establish that the copper(II) centers in 2a and the dihydroxo-bridged complex [Cu(II)(2)L'(OH)(2)][ClO(4)](2) (2b) [formed due to an impurity (L') present during the synthesis of L following Method A; L' = bis[alpha,alpha'-bis(N-methyl-N-(2-pyridylethyl)amino)-m-xylene]methylamine] are antiferromagnetically coupled, with 2a considerably more coupled than 2b. Reaction of 1a with O(2) in CH(2)Cl(2) (298 K) produces an additional unhydroxylated product of composition [Cu(II)(2)L(OH)(OH(2))][ClO(4)](3).2H(2)O.0.5HCl (3a). In agreement with its proposed hydroxo-/aquo-bridged structure, 3a is weakly antiferromagnetically coupled. In CH(3)CN solution, 3a rearranges to generate a doubly hydroxo-bridged species [Cu(II)(2)L(OH)(2)](2+). Using a solution-generated dicopper(I) complex of a closely similar ligand (L' ') providing five-membered chelate ring, the reactivity toward dioxygen was also investigated. It produces only an irreversibly oxidized product of composition Cu(II)(2)L' '(OH)(ClO(4))(3)(H(2)O)(2) (3b) (L' ' = alpha,alpha'-bis[N-methyl-N-(2-pyridylmethyl)amino]-m-xylene). For 3b the copper(II) centers are almost uncoupled.     

Di-2-pyridyl ketone oxime in copper chemistry: di-, tri-, penta- and hexanuclear complexes

The use of di-2-pyridyl ketone oxime (Hpko)/X- "blends" (X- = OH-, Cl-, ClO4-) in copper chemistry has yielded neutral binuclear and cationic trinuclear, pentanuclear or hexanuclear complexes. Various synthetic procedures have led to the synthesis of compounds [Cu5(pko)7].[ClO4]3.2CH3OH.2H2O (1), [Cu3(pko)3(OH)(Cl)]2[Ph4B]2.4DMF.2H2O (2), [Cu2(pko)4] (3), {[Cu6(pko)6ClO4(CH3CN)6][Cu6(pko)6(ClO4)3(CH3CN)4]}.8ClO4.14CH3CN.H2O (4). The structures of the complexes have been determined by single-crystal X-ray crystallography.     

Hydroquinone-bridged dinuclear Cu(II) complexes and single-crystalline Cu(II) coordination polymers

Cationic dinuclear Cu(II) complexes 3 and 4 have been prepared using the novel hydroquinone-based imine chelators 2,5-((i)Pr(2)NCH(2)CH(2)N[double bond, length as m-dash]CH)(2)-1,4-(OH)(2)-C(6)H(2) (1) and 2,5-(pyCH(2)CH(2)N[double bond, length as m-dash]CH)(2)-1,4-(OH)(2)-C(6)H(2) (2), respectively (py = 2-pyridyl). X-Ray quality crystals of both complexes were grown from their DMF solutions. The sterically more encumbered compound crystallizes in the form of discrete dinuclear entities with Cu(II) centres in a distorted square-planar ligand environment (one coordination site is occupied by a DMF molecule). The pyridyl derivative 4 features dinuclear hydroquinone-bridged subunits similar to 3. However, the Cu(II) ions are now six-coordinate with two DMF molecules at an axial and an equatorial position of a Jahn-Teller-distorted octahedron. Moreover, the dinuclear subunits are no longer isolated but linked with each other via bridging hydroquinone oxygen atoms which occupy the second apical position of each octahedron. The structure suggests that the magnetic properties of the resulting coordination polymer of 4 could be described by a model valid for dimerized spin chains. As a result of this analysis the antiferromagnetic coupling constants J(1)/k(B) = 9.9 K (intradimer) and J(2)/k(B) = 0.9 K (interdimer) are obtained. Both in 3 and in 4, the hydroquinone --> semiquinone transition of the central bridging unit (E degrees ' = + 0.57 V, 3; E degrees ' = + 0.51 V, 4; DMF; vs. SCE) displays features of chemical reversibility. In the case of , reduction of Cu(II) centres requires a peak potential of E(p) = - 0.42 V.     

Assembly of lipophilic tetranuclear (Cu4 and Zn4) molecular metallophosphonates from 2,4,6-triisopropylphenylphosponic acid and pyrazole ligands

A sterically hindered aryl phosphonic acid ArP(O)(OH)2 (2) (Ar = 2,4,6-isopropylphenyl) was synthesized and structurally characterized. ArP(O)(OH)2 forms an interesting hydrogen-bonded corrugated sheet-type supramolecular structure in the solid-state. A three-component reaction involving ArP(O)(OH)2, 3,5-dimethylpyrazole(DMPZH), and Cu(CH3COO)2.H2O produces the tetranuclear Cu(II) compound [Cu4(mu3-OH)2{ArPO2(OH)}2(CH3CO2)2(DMPZH)4][CH3COO]2.CH2Cl2 (3). A similar three-component reaction involving ArP(O)(OH)2, 3,5-dimethylpyrazole, and Zn(CH3COO)2.2H2O yields the tetranuclear Zn(II) compound [Zn4{ArPO3}2{ArPO2(OH)}2{DMPZH}4(DMPZ)2].5MeOH (4). While 3 has been found to have an asymmetric cage structure where two dinuclear copper cores are bridged by bidentate [ArPO2(OH)]- ligands, 4 possesses an open-book tricyclic structure composed of three fused metallophosphonate rings. Magnetic studies on 3 revealed antiferromagnetic behavior.     

Synthesis, structure and comparison of the DNA cleavage ability of metal complexes M(II)L with the N-(2-ethoxyethanol)-bis(2-picolyl)amine ligand L (M = Co, Ni, Cu and Zn)

Complexes of a N,N-bis(2-picolyl)amine (bpa) derivative with a pendant ethoxyethanol side chain (bpa(CH2)2O(CH2)2OH) (1) with late divalent transition metal ions Co(II), Ni(II), Cu(II) and Zn(II) have been studied. All complexes, [[bpa(CH2)2O(CH2)2OH]Co(NO3)](NO3) (1Co), [[bpa(CH2)2O(CH2)2OH]Ni(NO3)](NO3) (1Ni), [[bpa(CH2)2O(CH2)2OH]Cu(H2O)(NO3)](NO3) (1Cu) and [[bpa(CH2)2O(CH2)2OH]Zn(NO3)](NO3) (1Zn), were comprehensively characterized and their X-ray single crystal structures have been determined. The complexes show hexacoordinated geometries, in which 1 acts as a tetradentate (1Cu) or pentadentate (1Co, 1Ni and 1Zn) ligand. DNA cleavage experiments have been performed on supercoiled double stranded DNA plasmids in order to compare the cleavage efficiency of all four metals in the same ligand environment of 1. In this assay, 1Co and 1Cu showed the highest cleavage efficiency, whereas 1Ni and 1Zn were virtually inactive. Quantification of the gel electrophoresis bands showed that more than 80% of the plasmid has suffered at least one single strand cut in the case of 1Cu, and about 50% of the plasmid was nicked by 1Co. The differential cleavage activity is discussed in relation to the structural findings and a mechanism is proposed for 1Cu.     

Microporous metal-organic frameworks incorporating 1,4-benzeneditetrazolate: syntheses, structures, and hydrogen storage properties

The potential of tetrazolate-based ligands for forming metal-organic frameworks of utility in hydrogen storage is demonstrated with the use of 1,4-benzeneditetrazolate (BDT(2)(-)) to generate a series of robust, microporous materials. Reaction of H(2)BDT with MnCl(2).4H(2)O and Mn(NO(3))(2).4H(2)O in N,N-diethylformamide (DEF) produces the two-dimensional framework solids Mn(3)(BDT)(2)Cl(2)(DEF)(6) (1) and Mn(4)(BDT)(3)(NO(3))(2)(DEF)(6) (2), whereas reactions with hydrated salts of Mn(2+), Cu(2+), and Zn(2+) in a mixture of methanol and DMF afford the porous, three-dimensional framework solids Zn(3)(BDT)(3)(DMF)(4)(H(2)O)(2).3.5CH(3)OH (3), Mn(3)(BDT)(3)(DMF)(4)(H(2)O)(2).3CH(3)OH.2H(2)O.DMF (4), Mn(2)(BDT)Cl(2)(DMF)(2).1.5CH(3)OH.H(2)O (5), and Cu(BDT)(DMF).CH(3)OH.0.25DMF (6). It is shown that the method for desolvating such compounds can dramatically influence the ensuing gas sorption properties. When subjected to a mild evacuation procedure, compounds 3-6 exhibit permanent porosity, with BET surface areas in the range 200-640 m(2)/g. The desolvated forms of 3-5 store between 0.82 and 1.46 wt % H(2) at 77 K and 1 atm, with enthalpies of adsorption in the range 6.0-8.8 kJ/mol, among the highest so far reported for metal-organic frameworks. In addition, the desolvated form of 6 exhibits preferential adsorption of O(2) over H(2) and N(2), showing promise for gas separation and purification applications.     

Assembly of tetra, di and mononuclear molecular cadmium phosphonates using 2,4,6-triisopropylphenylphosponic acid and ancillary ligands

The reaction of ArPO(3)H(2) (Ar = 2,4,6-iPr(3)-C(6)H(2)) with Cd(CH(3)COO)(2).2H(2)O using various co-ligands such as methanol, dimethylformamide (DMF) and 3,5-dimethylpyrazole (DMPZH) resulted in the formation of tetranuclear assemblies [Cd(4)(ArPO(3))(2)(ArPO(3)H)(4)(CH(3)OH)(4)].3(CH(3)OH) (1), [Cd(4)(ArPO(3))(2)(ArPO(3)H)(4)(DMF)(4)].3(DMF) (2) and [Cd(4)(ArPO(3))(2)(ArPO(3)H)(4)(DMF)(2)(DMPZH)(2)].2(DMF).2(H(2)O) (3). In all of these compounds the tetranuclear cadmium array, containing two five-coordinate and two six-coordinate cadmium atoms, is held together by two mu(4) capping [ArPO(3)](2-) and four anisobidentate mu(2) [ArPO(2)(OH)](-) ligands. Each cadmium atom is bound to an additional ancillary ligand. The reaction of ArPO(3)H(2) with Cd(CH(3)COO)(2).2H(2)O in the presence of the chelating ligand 2,2'-bipyridine (bipy) leads to the exclusive formation of the dinuclear assembly [Cd(2)(ArPO(3)H)(4)(bipy)(2)].(CH(3)OH)(H(2)O) (4). The latter contains an eight-membered Cd(2)P(2)O(4) inorganic ring formed as a result of the bridging coordination action of two anisobidentate mu(2) [ArPO(2)(OH)](-) ligands. Each cadmium atom is bound by one chelating bipy and one monodentate [ArPO(2)(OH)](-) ligands. Use of four equivalents of 3,5-dimethylpyrazole leads to the formation of the mononuclear derivative [Cd(ArPO(3)H)(2)(DMPZH)(4)] (5). The molecular structure of the latter comprises of a central cadmium atom surrounded by six monodentate ligands. Four of these are neutral pyrazole ligands that occupy the equatorial plane; the remaining two are anionic phosphinate ligands which are present trans to each other. The thermal analysis of 1 and 4 reveals that the char residue obtained at 600 degrees C consists predominantly of Cd(2)P(2)O(7).     

Intra and intermolecular magnetic interactions in a series of dinuclear Cu(II)/hxta complexes [H5hxta = N,N'-(2-hydroxy-1,3-xylylene)-bis-(N-carboxymethylglycine)]: correlation of magnetic properties with geometry

Nine dinuclear copper(II) complexes with hxta5- ligands [H5hxta = N,N'-(2-hydroxy-1,3-xylylene)-bis-(N-carboxymethylglycine)]: [Cu2(MeO-hxtaH)(H2O)2] x 4H2O (1), [Na(micro-H2O)2(H2O)6][Cu2(Cl-hxta)(H2O)3]2 x 6H2O (2), [Cu(H2O)6][Cu2(Me-hxta)(H2O)2](NO3) x 2H2O (3), [Cu2(R-hxtaH)(H2O)3] x 3H2O [R = Cl (4), CH3 (5), and MeO (6)], [Cu2(MeO-hxtaH2)(micro-X)(CH3OH)] x 3CH3OH [X = Cl (7), Br (8)] and K5Na(micro-H2O)10[Cu2(micro-CO3)(Me-hxta)]2 x 4H2O (9), have been synthesized and structurally characterized. In complexes 4-7, the dinuclear units are linked via novel pairwise supramolecular interactions involving the ligand carboxylate groups. The intra- and intermolecular magnetic interactions have been quantified, and the coupling constants have been related to the structural geometries.