One-step Synthesis and Gas Sensing Properties of Hierarchical SnO2 Materials

Hierarchical tin oxide(SnO₂) architectures were synthesized with a facile hydrothermal method. In the hydrothermal synthesis, sodium dodecyl benzene sulfonate(SDBS) surfactant plays an important role as structure-directing reagent. The synthesized samples were characterized by powder X-ray diffraction(XRD), field emission scanning electron microscopy(FESEM), transmission electron microscopy(TEM) and high-resolution transmission electron microscopy(HRTEM). The results clearly reveal that the hierarchical architectures of SnO₂ were composed of aggregated nanosheets with a thickness of about 100 nm. A possible mechanism for the formation of the SnO₂ hierarchical architectures was proposed. In addition, the gas sensing properties of the as-prepared products were investigated and it was found that the sensor based on the special SnO₂ hierarchical architectures exhibited a high response and good selectivity to NO₂ at the optimal working temperature of 160 ℃.     

物理混合法制备分级混晶TiO2微纳米材料及其光催化性能

通过物理混合法可控合成了分级混晶TiO₂微纳米材料, 采用扫描电子显微镜(SEM)、 透射电子显微镜(TEM)、 X射线衍射仪(XRD)、 X射线光电子能谱仪(XPS)和固体紫外-可见分光光度计(UV-Vis)等对该微纳米材料进行了表征, 并评价了不同混晶比材料的光催化性能. 结果表明, 所得材料是由均匀负载金红石纳米颗粒的锐钛矿纳米片组装的三维分级结构. 其具有很高的光催化活性, 分级结构和混晶异相结的同时引入是提高材料光催化活性的关键.     

Self-assembled Synthesis of 3D CuO Flocculus-like Nanosheet-based Hierarchical Nanostructures

A simple, surfactant-free, and environmentally benign method has been developed to synthesize a novel 3D flocculus-like CuO hierarchical nanostructure self-assembled with 2D nanosheet as building blocks. Detailed proofs demonstrate that the overall synthetic process underwent the dehydration and re-crystallization of precursor Cu(OH)₂ nanowires, and the subsequent two-step oriented attachment. In addition, 3D butterfly-like and flower-like CuO nanostructures consisted of 2D nanosheets could be obtained by adjusting the concentration of NaOH(c_NaOH) in the solution. c_NaOH played a key role in tailoring the thickness of the nanosheets and changing the morphology of the product. This report may be helpful to constructing fine-tune hierarchical CuO nanostructures under basic conditions.     

Design of Cr2O3@ZnO Hetero-junction Hierarchical Nanostructures with Enhanced Xylene-sensing Properties

Cr₂O₃@ZnO hetero-junction hierarchical nanostructures were designed to be enhanced xylene sensing material, and thereinto, flower-like ZnO hierarchical nanostructures were synthesized via a solution-based method, and then Cr₂O₃ particles were developed on the surface of ZnO petals via a solvothermal method. From the results of XRD patterns, SEM and TEM images, it can be observed that ZnO has a high-quallity crystallinity and Cr₂O₃ particles scatter uniformly on the suruface of ZnO. The products with different ratios of Cr₂O₃ were used to fabricate gas sensors, and the result indicates that the hetero-junction structures prompt the response to xylene, and the reason may be attributed to the decrease of main carriers concentration caused by the p-n junction between ZnO(n-type semiconductor) and Cr₂O₃(p-type semiconductor), as well as the catalytic oxidation effect on methyl groups of the xylene by Cr₂O₃.     

Synthesis of Mg5(CO3)4(OH)2·4H2O with Flower-like Microstructure and Its Catalytic Activity for Transesterification of Dimethyl Carbonate with Phenol

A novel flower-like hydrated magnesium carbonate hydroxide,Mg_5(CO_3)_4(OH)_2·4H_2O,with micro-structure composed of individual thin nano-sheets was synthesized using a facile solution route without the use of template or organic surfactant.Reaction time has an important effect on the final morphology of the product.The micro-structure and morphology of Mg_5(CO_3)_4(OH)_2·4H_2O were characterized by means of X-ray diffractometry(XRD),field-emission scanning electron microscopy(FE-SEM).Brunauer-Emmett-Teller(BET)surface areas of the samples were also measured.The probable formation mechanism of flower-like micro-structure was discussed.It was found that Mg_5(CO_3)_4(OH)_2·4H_2O with flower-like micro-structure was a novel and efficient catalyst for the synthesis of diphenyl carbonate(DPC)by transesterification of dimethyl carbonate(DMC)with phenol.     

一种暴露CeO2{100}晶面的铈钛复合氧化物合成及其负载Au催化剂一氧化碳低温氧化性能研究

利用水热法制备了一种具有花朵状形貌的铈钛复合氧化物,该复合氧化物主要暴露CeO₂{100}晶面。SEM、XRD表征结果表明,花朵状铈钛复合氧化物的形成主要分为两个阶段,即无定型的快速生长及缓慢结晶两个过程;在制备过程中,铈钛比例、KOH浓度、晶化时间和焙烧温度是该形貌形成的主要影响因素。其负载Au催化剂后常温即能实现CO的完全转化;TEM和H₂-TPR结果表明,暴露的CeO₂{100}晶面以及Au和载体的强相互作用是该催化剂具有高活性的主要原因。     

2-甲硫基-4-羟基-5-嘧啶甲酸乙酯的工艺优化

以S-甲基异硫脲半硫酸盐和乙氧基亚甲基丙二酸二乙酯为主要原料,乙醇为溶剂,合成出2-甲硫基-4-羟基-5-嘧啶甲酸乙酯,研究了2-甲硫基-4-羟基-5-嘧啶甲酸乙酯的工艺优化,考察了投料比、反应温度、反应时间等因素对产率的影响。 获得较好的反应条件:n(C₂H₆N₂S·1/2H₂SO₄):n(C₁₀H₁₆O₅):n(NaOH)=1.2:1:1.8,在室温下缓慢滴加NaOH溶液,搅拌反应6 h,酸化得白色固体产物,产率为81.1%。产物结构经熔点测定仪、¹H NMR、ESI-MS、FT-IR等技术手段得到验证。     

The gas sensing properties of TiO_2 nanotubes synthesized by hydrothermal method

In this paper,the TiO₂ nanotubes were synthesized by hydrothermal method using a 10 mol/L NaOH aqueous solution at 150℃. The structure of prepared materials was characterized by X-ray diffraction（XRD）,transmission electron microscopy（TEM）. scanning electron microscope（SEM） and Brunauer-Emmett-Teller（BET）.The prepared TiO₂ nanotubes were used to prepare thick film gas sensors and the gas sensing properties to various gases were tested.Results show the prepared TiO₂ nanotube gas sensors responses to ethanol under dry condition at 450℃.This could be attributed to the fact that it had high porous morphology and a higher pore volume,which can promote the diffusion of ethanol deep inside the films and improve the sensor response. Moreover,the gas sensor made with nanotubes exhibit high selective response towards ethanol gas compared with H₂,CO,acetone.     

胺基邻菲咯啉-钌(Ⅱ)反应性荧光指示剂的合成与化学固定的研究

为减少荧光指示剂被水萃取流失,提高荧光膜的使用寿命,将5-氨基-邻菲咯啉与二(4,7-二苯基-邻菲咯啉)二氯化钌(Ⅱ)络合,合成带氨基的荧光指示剂[Ru(dpp)₂(phen-NH₂)]Cl₂,并经氨基键合到有机玻璃表面。以核磁、质谱、红外验证合成荧光指示剂的结构,研究键合条件对染色有机玻璃荧光发射的影响,监测荧光强度随水浸泡时间的变化。合成荧光指示剂的荧光发射峰值波长为570 nm,键合到有机玻璃后发射光谱红移20 nm,荧光强度受溶解氧影响,响应时间约为10 s,氧猝灭比达4。染色有机玻璃的荧光稳定性好,在50 ℃水中浸泡7个月,荧光强度下降小于1%。     

Sonochemical Synthesis of Three-dimensional Aggregates of Pd Nanoparticles with High Electrocatalytic Activity Towards Ethanol Oxidation

Flower-like aggregates composed of （4.0±0.8） nm palladium（Pd） nanoparticles were prepared via ultrasonics in the palladium（Ⅱ） chloride（PdCl2） H2O/EtOH（5/1,volume ratio） solution with the addition of a quantity of poly（vinyl pyrrolidone）（PVP） and sodium dodecyl sulfonate（SDS）.The morphologies,crystal structures and the optical properties of the flower-like Pd nanostructures were characterized by X-ray diffraction（XRD）,X-ray photoelectron spectroscopy（XPS）,scanning electron microscopy（SEM）,transmission electron microscopy（TEM）,selected area electron diffraction（SAED） and UV-visible absorption spectroscopy,respectively.The mechanism of sonochemical reduction of Pd（Ⅱ） ions was also investigated.The results show that the molar ratio of PVP to SDS affected the formation of the flower-like aggregates of Pd nanoparticles.Moreover,the electrocatalytic properties of Pd aggregates modified glassy carbon electrode for ethanol oxidation were also investigated by cyclic voltammetry（CV）.This material exhibits remarkable electrocatalytic activity for ethanol oxidation in 1 mol/L KOH and appears as a promising candidate to be applied in direct ethanol fuel cells.     

沉淀剂对铜锰复合氧化物变换催化剂构效的影响

以CuSO4.5H2O和MnSO4.H2O为原料,KOH和NaOH为沉淀剂制备了铜锰复合氧化物,考察了其变换反应催化性能,利用XRD、低温氮气吸附法、TG、H2-TPR等对所合成样品进行了表征。以KOH和NaOH为沉淀剂所得沉淀终产物的物相组成和织构明显不同,分别为层状结构碱式硫酸铜Cu4SO4(OH)6.H2O及无定形锰氧化物和Cu2+1O和Mn3O4混合物。两种物相组成和织构完全不同的沉淀终产物焙烧后都生成Cu1.5Mn1.5O4固熔体,在变换反应条件下均转化为Cu和MnO,但其催化性能却有明显差异。以NaOH为沉淀剂,得到以Cu2+1O和Mn3O4复合体为主的沉淀终产物,焙烧及还原后保持了较高的织构稳定性,提高了样品的活性和热稳定性。而以KOH为沉淀剂得到以层状结构碱式硫酸铜Cu4SO4(OH)6.H2O和无定形锰氧化物为主的沉淀终产物,在焙烧过程发生的演变极其复杂,削弱了铜锰组分协同效应,造成其活性和热稳定性极差。研究结果表明,NaOH作沉淀剂所制备样品的织构稳定性、催化活性显著高于以KOH作沉淀剂所制备样品,且热稳定性良好。     

香菇多糖的成分及其分子量研究

从香菇子实体中用0.9%NaCl水溶液、85%乙醇、热水、1%草酸铵、5%NaOH/0.05%NaBH₄和2%NaOH/2%尿素分别提取出四种杂多糖(L-FⅠ-L-FⅣn)和两种葡聚糖(L-FⅤ和L-FⅥn).红外光谱和高效液相色谱分析结果表明杂多糖主要由葡萄糖、葡萄糖醛酸、木糖、甘露糖、半乳糖和鼠李糖组成,而且按照分离过程的进行多糖中葡萄糖含量递增.由光散射和膜渗透压法研究了多糖的重均分子量Mw、均方根旋转半径2>^1/2、第二维利系数A₂及数均分子量M_n.L-FⅡ、L-FⅢ、L-FⅤ及L-FⅥn的M_w值依次为19.7×10⁴、192.3×10⁴、136.4×10⁴和136.7×10⁴,它们的多分散系数-Mw/-Mn在3～5范围.     

超声波作用下的钛醇盐水解法制备纳米TiO2

近十几年来, 有关二氧化钛光催化性能的研究已引起人们的浓厚兴趣, 在此方面进行了大量研究. 目前, 纳米二氧化钛的制备方法主要有化学沉淀法、溶胶-凝胶法、气相法和水热法等[1,2]. 超声化学是近年来新兴的一门边缘交叉学科, 已被应用于制备具有特殊结构和性能的纳米材料, 如金属[3]、碳化物[4]、氮化物[5]、氧化物[6]、合金[7]以及生物材料[8]等, 但对于超声作用在纳米粒子晶型转变方面的研究报道较少.     

基于紫外屏蔽性能的云母/MnO2/TiO2复合半导体微米片的制备及在聚丙烯中的应用

为改善聚丙烯(PP)的抗老化性能, 采用化学液相沉积法合成了云母/MnO₂/TiO₂复合半导体微米片, 并通过物理共混法将微米片引入PP中. 利用扫描电子显微镜(SEM)、 X射线衍射仪(XRD)、 拉曼光谱仪、 紫外-可见漫反射光谱仪(UV-Vis DRS)、 傅里叶变换红外光谱仪(FTIR)及电子万能试验机等考察了二氧化钛(TiO₂)负载量、 二氧化锰(MnO₂)添加量及pH等条件对微米片形貌、 晶体结构及紫外屏蔽性能的影响, 并研究了微米片对PP的抗老化改性效果. 结果表明, 控制MnO₂添加量为2.0%、 TiO₂负载量为20%、 pH值为1.6时, 可以诱导微米片中的TiO₂由锐钛矿型向金红石型转变, 微米片包覆状态佳、 紫外屏蔽性能优异. 紫外老化27 d后, 与纯PP相比, 经复合半导体微米片改性后的PP产生的C=O数量减少, 表面形貌保持度较高; 其拉伸强度保持率提升38%, 抗紫外老化性能显著提高.     

纳米氧化锡在锌-硝基苯电池反应中的电催化

以氯化锡为原料,四丙基溴化铵为表面活性剂水热法制备纳米二氧化锡（SnO₂）催化剂,并以钛网为基材,制备催化电极. 应用SEM,XRD等手段对催化剂进行表征. 考察了反应物浓度、反应温度和反应时间对催化剂形貌的影响. 研究了纳米SnO₂催化剂对锌还原硝基苯原电池反应的电催化性能. 结果表明,当 NaOH浓度为0. 5 mol•L^-1、水热反应温度160 ℃、水热反应时间15 h时,得到的SnO₂催化剂是由纳米片构成的刺球状颗粒,粒径最小,约17 nm. 与平板铂电极相比,制备的催化电极对硝基苯电还原具有更高的催化活性,硝基苯转化率为74%,最大放电功率为21.9 mW•cm^-2,远大于平板铂电极. 硝基苯的主要还原产物为苯胺、对乙氧基苯胺和对氯苯胺.     

微乳辅助的溶剂热法合成磷酸钐纳米棒

自1991年碳纳米管被发现以来,一维纳米材料以其独特的电、磁、光学和机械性质以及在纳米器件和功能材料上的巨大应用潜力而引起全世界的广泛关注,人们通过模板法、溶胶-凝胶法、水热法及微乳液法等多种方法合成了一系列一维纳米材料,其中微乳液法是近几年来兴起的较有发展前景的纳米材料的合成方法,微乳液是由油相、水相、表面活性剂和助表面活性剂组成的均匀稳定的体系,水相在表面活性剂和助表面活性剂的作用下均匀地分散在油相中,     

磷化过程对MoP催化剂醋酸加氢合成乙醇性能的影响

制备了系列磷化钼催化剂用于醋酸加氢合成乙醇活性评价,并采用XRD、XPS和SEM等技术对催化剂进行表征。结果表明,催化剂除含有MoP外,还有MoP_2O_7和MoO_2等物种,催化醋酸生成乙醇的活性物种是MoP,或者是MoP与MoP_2O_7、MoO_2协同起催化作用。磷化温度一定程度上影响催化剂的形成和活性组分的分布,磷化温度太低,MoP形成量少,磷化温度太高,MoP发生团聚和烧结,磷化温度为650℃时制备的催化剂活性最高。磷钼物质的量比为1.0时催化剂的乙醇合成性能最高。     

Chiral hierarchical molecular nanostructures on two-dimensional surface by controllable trinary self-assembly

The bottom-up fabrication of surface hierarchical nanostructures is of great importance for the development of molecular nanostructures for chiral molecular recognition and enantioselective catalysis. Herein, we report the construction of a series of 2D chiral hierarchical structures by trinary molecular self-assembly with copper phthalocyanine (CuPc), 2,3,7,8,12,13-hexahexyloxy-truxenone (TrO23), and 1,3,5-tris(10-carboxydecyloxy) benzene (TCDB). A series of flower-like chiral hierarchical molecular architectures with increased generations are formed, and the details of these structures are investigated by high resolution scanning tunneling microscopy (STM). The flower-like hierarchical molecular architectures could be described by a unified configuration in which the lobe of each architecture is composed of a different number of triangular shape building units (TBUs). The off-axis edge-to-edge packing of TBUs confers the organizational chirality of the hierarchical assemblies. On the other hand, the TBUs can tile the surface in a vertex-sharing configuration, resulting in the expansion of chiral unit cells, which thereby further modulate the periodicity of chiral voids in the multilevel hierarchical assemblies. The formation of desired hierarchical structures could be controlled through tuning the molar ratio of each component in liquid phase. The results are significant for the design and fabrication of multicomponent chiral hierarchical molecular nanostructures.     

花状结构Mn/CuO-CeO2的合成及对 CO氧化反应的催化性能

通过构建CeO₂与过渡金属氧化物的复合材料提高了CeO₂的高温热稳定性并改善其催化活性. 利用溶剂热法合成了不同组成的三维花状结构Mn/CuO-CeO₂多元复合纳米材料. XRD分析结果表明, 复合材料是以萤石相CeO₂结构为主体的固溶体; SEM照片显示花状结构微球由无数纳米片组装而成, 而每个纳米片的结构单元为尺寸约10 nm的纳米颗粒. 复合材料中CuO和MnO_x的高分散性使各组分之间产生强的相互作用, 所以催化剂的催化活性按照CeO₂2<xMn/CuO-CeO₂的顺序依次升高. 随着Mn掺杂量的增加, 复合材料的催化活性先升高后降低, 在n_Ce∶n_Cu∶n_Mn=25∶5∶2时催化剂表现出最佳催化性能: 在CO氧化反应中, 173 ℃时即能实现CO的完全转化, 并且具有很好的催化稳定性.     

阴离子氨基酸表面活性剂调控碳酸钙的仿生合成

室温下, 在乙醇或乙醇-水混合体系中, 利用氨基酸表面活性剂N-酰基十二烷基肌氨酸钠(Sar)调控合成碳酸钙, 采用SEM, XRD和FTIR等技术表征了反应产物. 在乙醇体系中, 首先形成多面体形状的文石, 然后逐渐转变为圆球状的无定形碳酸钙. 在乙醇-水混合体系中, 合成了花簇状多级结构碳酸钙晶体. 增加N-酰基十二烷基肌氨酸钠的用量有助于形成球霰石结构, 当n(Ca2+)∶n(Sar)=1∶1 时, 得到的花状碳酸钙为球霰石和方解石的混合物, 当n(Ca2+)∶n(Sar)=1∶2 时, 得到纯净的球霰石, 其形貌为大小较均一的单分散的球, 直径约为7 μm; 另外, 当n(Ca2+)∶n(Sar)=1∶1时, 混合溶剂中水和乙醇的体积比由1.5∶1依次增加为7∶3和3∶1时, 碳酸钙晶体的形貌由花状逐渐向球形过渡, 晶体中球霰石和方解石的含量也随之变化, 其中, 当水和醇的体积比为7∶3时, 产物主要为球霰石型晶体.