Amine‐Assisted Syntheses of Carbonate‐Free and Highly Crystalline Nitrate‐Containing Zn‐Al Layered Double Hydroxides

Zn‐Al layered double hydroxides (LDHs), with nitrate as the charge balancing anion in the interlayer space, were synthesized by precipitation from homogeneous solution containing different amines [e.g., hexamethylenetetraamine (HMTA), diethylenediamine (DEDA), trimethylamine (TMA) and dimethylamine (DMA)]. The applied method does not require nitrogen atmosphere. The solution pH and concentration of different amines were varied in order to identify the controlling parameters and whether nitrate or carbonate are the interlayer anion. Particularly, the addition of amines turns out to be an effective tool for the synthesis of nitrate containing Zn‐Al LDHs independent from the nitrogen atmosphere. The structure, textural, composition, and morphological properties were investigated using the powder X‐ray diffraction (PXRD), thermogravimetric analysis (TGA), FT‐IR spectroscopy, and scanning electron microscopy (SEM). The analyses showed that the samples had high crystallinity and purity. The NO₃‐ZnAl LDHs samples show that LDH sheets are predominantly smooth textured and the thickness of LDH sheets are found to be around 23 nm. The results also indicate that this method successfully produces a NO₃^– form Zn‐Al LDH that is almost identical to the one synthesized by conventional methods.     

Microwave‐Induced In Situ Synthesis of Zn2GeO4/N‐Doped Graphene Nanocomposites and Their Lithium‐Storage Properties

Zn₂GeO₄/N‐doped graphene nanocomposites have been synthesized through a fast microwave‐assisted route on a large scale. The resulting nanohybrids are comprised of Zn₂GeO₄ nanorods that are well‐embedded in N‐doped graphene sheets by in situ reducing and doping. Importantly, the N‐doped graphene sheets serve as elastic networks to disperse and electrically wire together the Zn₂GeO₄ nanorods, thereby effectively relieving the volume‐expansion/contraction and aggregation of the nanoparticles during charge and discharge processes. We demonstrate that an electrode that is made of the as‐formed Zn₂GeO₄/N‐doped graphene nanocomposite exhibits high capacity (1463 mAh g^?1 at a current density of 100 mA g^?1), good cyclability, and excellent rate capability (531 mAh g^?1 at a current density of 3200 mA g^?1). Its superior lithium‐storage performance could be related to a synergistic effect of the unique nanostructured hybrid, in which the Zn₂GeO₄ nanorods are well‐stabilized by the high electronic conduction and flexibility of N‐doped graphene sheets. This work offers an effective strategy for the fabrication of functionalized ternary‐oxide‐based composites as high‐performance electrode materials that involve structural conversion and transformation.     

Single‐Step Synthesis of Mesoporous Carbon Nitride/Molybdenum Sulfide Nanohybrids for High‐Performance Sodium‐Ion Batteries

Molybdenum disulfide (MoS₂) is a promising candidate as a high‐performing anode material for sodium‐ion batteries (SIBs) due to its large interlayer spacing. However, it suffers from continued capacity fading. This problem could be overcome by hybridizing MoS₂ with nanostructured carbon‐based materials, but it is quite challenging. Herein, we demonstrate a single‐step strategy for the preparation of MoS₂ coupled with ordered mesoporous carbon nitride using a nanotemplating approach which involves the pyrolysis of phosphomolybdic acid hydrate (PMA), dithiooxamide (DTO) and 5‐amino‐1H‐tetrazole (5‐ATTZ) together in the porous channels of 3D mesoporous silica template. The sulfidation to MoS₂, polymerization to carbon nitride (CN) and their hybridization occur simultaneously within a mesoporous silica template during a calcination process. The CN/MoS₂ hybrid prepared by this unique approach is highly pure and exhibits good crystallinity as well as delivers excellent performance for SIBs with specific capacities of 605 and 431 mAhg^?1 at current densities of 100 and 1000 mAg^?1, respectively, for SIBs.     

In‐vitro Aluminum Determination and Preconcentration in Blood of Dialysis Patients Based on Ionic Liquid Dispersive Liquid‐Liquid Biomicroextraction by 2‐Amino‐3‐(1H‐imidazol‐4‐yl)propanoic Acid

In this study, trace amounts of aluminum in serum of dialysis patients were chelated with 2‐Amino‐3‐(1H‐imidazol‐4‐yl)propanoic acid (Histidine) and determined by electro‐thermal atomic absorption spectrometry (ETAAS). A fast and efficient method based on ionic liquid dispersive liquid‐liquid bio‐micro‐extraction (IL‐DLLBME) was developed for the determination of Al cation in human blood serum samples. In this work, a small amount of 1‐Hexyl‐3‐methylimmidazolum hexafluorophosphate ([HMIM] [PF₆]) as an extractant solvent was dissolved in acetone as a dispersant solvent and then the binary solution was rapidly injected by a syringe into the serum containing Al³⁺,Which have already in‐vitro chelated by Histidine amino acid (Al‐His) at pH = 6.5. After separation, the settled IL‐phase was dissolved in ethanol up to 200 μL and 20 μL of samples injected into the ET‐AAS by auto‐sampler. Various parameters have been studied and optimized for 10 mL of sample. Under the optimum conditions, the enrichment factor (EF), limit of detection (LOD) and working range (peak area mode) were obtained 53, 15 ng L^?1 and 0.05‐4.1 μg L^?1 respectively. In vitro Al chelation showed that His can significantly decrease aluminum concentration in serum of dialysis patients. Validation of methodology was confirmed by standard reference material (SRM).     

Topochemical Synthesis of Two‐Dimensional Transition‐Metal Phosphides Using Phosphorene Templates

Transition‐metal phosphides (TMPs) have emerged as a fascinating class of narrow‐gap semiconductors and electrocatalysts. However, they are intrinsic nonlayered materials that cannot be delaminated into two‐dimensional (2D) sheets. Here, we demonstrate a general bottom‐up topochemical strategy to synthesize a series of 2D TMPs (e.g. Co₂P, Ni₁₂P₅, and Co_xFe_2?xP) by using phosphorene sheets as the phosphorus precursors and 2D templates. Notably, 2D Co₂P is a p‐type semiconductor, with a hole mobility of 20.8 cm² V^?1 s^?1 at 300 K in field‐effect transistors. It also behaves as a promising electrocatalyst for the oxygen evolution reaction (OER), thanks to the charge‐transport modulation and improved surface exposure. In particular, iron‐doped Co₂P (i.e. Co_1.5Fe_0.5P) delivers a low overpotential of only 278 mV at a current density of 10 mA cm^?2 that outperforms the commercial Ir/C benchmark (304 mV).     

Boron‐Doped,Carbon‐Coated SnO2/Graphene Nanosheets for Enhanced Lithium Storage

Heteroatom doping is an effective method to adjust the electrochemical behavior of carbonaceous materials. In this work, boron‐doped, carbon‐coated SnO₂/graphene hybrids (BCTGs) were fabricated by hydrothermal carbonization of sucrose in the presence of SnO₂/graphene nanosheets and phenylboronic acid or boric acid as dopant source and subsequent thermal treatment. Owing to their unique 2D core–shell architecture and B‐doped carbon shells, BCTGs have enhanced conductivity and extra active sites for lithium storage. With phenylboronic acid as B source, the resulting hybrid shows outstanding electrochemical performance as the anode in lithium‐ion batteries with a highly stable capacity of 1165 mA h g^?1 at 0.1 A g^?1 after 360 cycles and an excellent rate capability of 600 mA h g^?1 at 3.2 A g^?1, and thus outperforms most of the previously reported SnO₂‐based anode materials.     

A Computational Study of a Single‐Walled Carbon‐Nanotube‐Based Ultrafast High‐Capacity Aluminum Battery

Exploring suitable electrode materials is a fundamental step toward developing Al batteries with enhanced performance. In this work, we explore using density functional theory calculations the feasibility of single‐walled carbon nanotubes (SWNTs) as a cathode material for Al batteries. Carbon nanotubes with hollow structures and large surface area are able to overcome the difficulty of activating the opening of interlayer spaces as observed in graphite electrode during the first intercalation cycle. Our results show that AlCl₄ binds strongly with the SWNT to result in an energetically and thermally stable AlCl₄‐adsorbed SWNT system. Diffusion calculations show that the SWNT system allows ultrafast diffusion of AlCl₄ with a more favorable inner surface diffusion than outer surface diffusion. Our charge‐density difference and Bader atomic charge analysis confirm the oxidation of SWNT upon adsorption of AlCl₄, which shows a similar behavior to the previously studied graphite cathode. The average open‐circuit voltage and AlCl₄ storage capacity increases with increasing SWNT diameter and can be as high as 1.96 V and 275 mA h g⁻¹ in (25,25) SWNT relative to graphite (70 mA h g⁻¹). All of these properties show that SWNTs are a potential cathode material for high‐performance Al batteries and should be explored further.     

Selenium‐Substituted Diketopyrrolopyrrole Polymer for High‐Performance p‐Type Organic Thermoelectric Materials

Development of high‐performance organic thermoelectric (TE) materials is of vital importance for flexible power generation and solid‐cooling applications. Demonstrated here is the significant enhancement in TE performance of selenium‐substituted diketopyrrolopyrrole (DPP) derivatives. Along with strong intermolecular interactions and high Hall mobilities of 1.0–2.3 cm² V^?1 s^?1 in doping‐states for polymers, PDPPSe‐12 exhibits a maximum power factor and ZT of up to 364 μW m^?1 K^?2 and 0.25, respectively. The performance is more than twice that of the sulfur‐based DPP derivative and represents the highest value for p‐type organic thermoelectric materials based on high‐mobility polymers. These results reveal that selenium substitution can serve as a powerful strategy towards rationally designed thermoelectric polymers with state‐of‐the‐art performances.     

Dispersion of Reduced Graphene Oxide in Multiple Solvents with an Imidazolium‐Modified Hexa‐peri‐hexabenzocoronene

An imidazolium‐modified hexa‐peri‐hexabenzocoronene derivative (HBC‐C₁₁‐MIM[Cl^?]) was designed and synthesized as a stabilizer to fabricate reduced graphene oxide (RGO). The resulting RGO/HBC‐C₁₁‐MIM[Cl^?] hybrid shows excellent dispersivity (5.0 mg mL^?1) and stability in water. RGO/HBC‐C₁₁‐MIM[Cl^?] was comprehensively characterized by using atomic force microscopy, X‐ray diffraction, X‐ray photoelectron spectroscopy, thermogravimetric analysis, and Raman spectroscopy, thus revealing that one HBC‐C₁₁‐MIM[Cl^?] group can stabilize about 178 carbon atoms on the graphene sheets. The obtained hybrid film exhibits a high conductivity of 286 S m^?1. Furthermore, the HBC‐C₁₁‐MIM[Cl^?]‐modified RGO sheets can be readily dispersed in polar organic solvents upon exchange of the hydrophilic Cl^? ions for hydrophobic bis(trifluoromethylsulfonyl) amide (NTf₂^?) ions.     

A New Family of Two‐Dimensional Zeolites Prepared from the Intermediate Layered Precursor IPC‐3P Obtained during the Synthesis of TUN Zeolite

The crystallization of zeolite TUN with 1,4‐bis(N‐methylpyrrolidinium)butane as template proceeds through an intermediate, designated IPC‐3P, following the Ostwald rule of successive transformations. This apparently layered transient product has been thoroughly investigated and found to consist of MWW monolayers stacked without alignment in register, that is, disordered compared with MCM‐22P. The structure was confirmed based on X‐ray diffraction and high‐resolution (HR)TEM analysis. The layered zeolite precursor IPC‐3P can be swollen and pillared affording a combined micro‐ and mesoporous material with enhanced Brunauer–Emmett–Teller (BET) surface area (685 m²g^?1) and greater accessibility of Brønsted acid sites for bulky molecules. This mesoporous material was probed with 2,6‐di‐tert‐butylpyridine (DTBP). IPC‐3P and its modification create a new layered zeolite sub‐family belonging to the MWW family. FTIR data indicate that (Al)MWW materials MCM‐22 and IPC‐3 with Si/Al ratios greater than 20 exhibit a lower relative ratio of Brønsted to Lewis acid sites than MCM‐22 (with Si/Al ratios of around 13), that is, less than 2 versus more than 3, respectively. This is maintained even upon pillaring and warrants further exploration of materials like IPC‐3P with a higher Al content. The unique XRD features of IPC‐3P indicating misaligned stacking of layers and distinct from MCM‐22P, are also seen in other MWW materials such as EMM‐10P, hexamethonium‐templated (HM)‐MCM‐22, ITQ‐30, and UZM‐8 suggesting the need for more detailed study of their identity and properties.     

A Pyrazine‐Based Polymer for Fast‐Charge Batteries

The lack of high‐power and stable cathodes prohibits the development of rechargeable metal (Na, Mg, Al) batteries. Herein, poly(hexaazatrinaphthalene) (PHATN), an environmentally benign, abundant and sustainable polymer, is employed as a universal cathode material for these batteries. In Na‐ion batteries (NIBs), PHATN delivers a reversible capacity of 220 mAh g^?1 at 50 mA g^?1, corresponding to the energy density of 440 Wh kg^?1, and still retains 100 mAh g^?1 at 10 Ag^?1 after 50 000 cycles, which is among the best performances in NIBs. Such an exceptional performance is also observed in more challenging Mg and Al batteries. PHATN retains reversible capacities of 110 mAh g^?1 after 200 cycles in Mg batteries and 92 mAh g^?1 after 100 cycles in Al batteries. DFT calculations, X‐ray photoelectron spectroscopy, Raman, and FTIR show that the electron‐deficient pyrazine sites in PHATN are the redox centers to reversibly react with metal ions.     

6‐Amino­nicotinic acid hydro­chloride

The title compound, 2‐amino‐5‐carboxy­pyridinium chloride, C₆H₇N₂O₂⁺·Cl^?, was isolated from a 1 M HCl aqueous solution containing 2‐amino‐5‐cyano­pyridine. The structure is held together by extensive hydrogen bonding between the chloride ions and the carboxylic acid, amino and pyridinium H atoms. The mol­ecules pack as sheets, with the sheets at a distance of 3.21 (3) Å from one another.     

Red Phosphorescent Bis‐Cyclometalated Iridium Complexes with Fluorine‐, Phenyl‐, and Fluorophenyl‐Substituted 2‐Arylquinoline Ligands

Red phosphorescent iridium(III) complexes based on fluorine‐, phenyl‐, and fluorophenyl‐substituted 2‐arylquinoline ligands were designed and synthesized. To investigate their electrophosphorescent properties, devices were fabricated with the following structure: indium tin oxide (ITO)/4,4′,4′′‐tris[2‐naphthyl(phenyl)amino]triphenylamine (2‐TNATA)/4,4′‐bis[N‐(1‐naphthyl)‐N‐phenylamino]biphenyl (NPB)/4,4′‐bis(N‐carbazolyl)‐1,1′‐biphenyl (CBP): 8 % iridium (III) complexes/bathocuproine (BCP)/tris(8‐hydroxyquinolinato)aluminum (Alq₃)/8‐hydroxyquinoline lithium (Liq)/Al. All devices, which use these materials showed efficient red emissions. In particular, a device exhibited a saturated red emission with a maximum luminance, external quantum efficiency, and luminous efficiency of 14200 cd m^?2, 8.44 %, and 6.58 cd A^?1 at 20 mA cm^?2, respectively. The CIE (x, y) coordinates of this device are (0.67, 0.33) at 12.0 V.     

A Delamination Strategy for Thinly Layered Defect‐Free High‐Mobility Black Phosphorus Flakes

Extraordinary electronic and photonic features render black phosphorus (BP) an important material for the development of novel electronics and optoelectronics. Despite recent progress in the preparation of thinly layered BP flakes, scalable synthesis of large‐size, pristine BP flakes remains a major challenge. An electrochemical delamination strategy is demonstrated that involves intercalation of diverse cations in non‐aqueous electrolytes, thereby peeling off bulk BP crystals into defect‐free flakes comprising only a few layers. The interplay between tetra‐n‐butylammonium cations and bisulfate anions promotes a high exfoliation yield up to 78 % and large BP flakes up to 20.6 μm. Bottom‐gate and bottom‐contact field‐effect transistors, comprising single BP flakes only a few layers thick, exhibit a high hole mobility of 252±18 cm² V^?1 s^?1 and a remarkable on/off ratio of (1.2±0.15)×10⁵ at 143 K under vacuum. This efficient and scalable delamination method holds great promise for development of BP‐based composites and optoelectronic devices.     

On the Mesoporogen‐Free Synthesis of Single‐Crystalline Hierarchically Structured ZSM‐5 Zeolites in a Quasi‐Solid‐State System

Hierarchically structured zeolites (HSZs) have gained much academic and industrial interest owing to their multiscale pore structures and consequent excellent performances in varied chemical processes. Although a number of synthetic strategies have been developed in recent years, the scalable production of HSZs single crystals with penetrating and three‐dimensionally (3‐D) interconnected mesopore systems but without using a mesoscale template is still a great challenge. Herein, based on a steam‐assisted crystallization (SAC) method, we report a facile and scalable strategy for the synthesis of single‐crystalline ZSM‐5 HSZs by using only a small amount of micropore‐structure‐directing agents (i.e., tetrapropylammonium hydroxide). The synthesized materials exhibited high crystallinity, a large specific surface area of 468 m² g^?1, and a pore volume of 0.43 cm³ g^?1 without sacrificing the microporosity (≈0.11 cm³ g^?1) in a product batch up to 11.7 g. Further, a kinetically controlled nucleation–growth mechanism is proposed for the successful synthesis of single‐crystalline ZSM‐5 HSZs with this novel process. As expected, compared with the conventional microporous ZSM‐5 and amorphous mesoporous Al‐MCM‐41 counterparts, the synthesized HSZs exhibited significantly enhanced activity and stability and prolonged lifetime in model reactions, especially when bulky molecules were involved.     

Direct Dual‐Template Synthesis of MWW Zeolite Monolayers

A two‐dimensional zeolite with the topology of MWW sheets has been obtained by direct synthesis with a combination of two organic structure‐directing agents. The resultant material consists of approximately 70 % single and double layers and displays a well‐structured external surface area of about 300 m² g^?1. The delaminated zeolite prepared by means of this single‐step synthetic route has a high delamination degree, and the structural integrity of the MWW layers is well preserved. The new zeolite material displayed excellent activity, selectivity, and stability when used as a catalyst for the alkylation of benzene with propylene and found to be superior to the catalysts that are currently used for producing cumene.     

Preparation and Characterization of TiO2-pillared Layered HNb3O8

IntroductionThelayeredcompoundssuchassmectiteclays,me-tallicphosphatesandtransitionmetaloxidespillaredwithinorganicoxideshavebeenattractingmoreandmoreattentionfrombothacademicandindustrialfieldsduetotheirpotentialapplicationsinadsorption,separa-tion,conductionandparticularlycatalysis.1-7NiobatessuchasKNb3O8andK4Nb6O17,andthecorrespondingprotonicoxides,HNb3O8andH4Nb6O17,aremembersofthefamilyoflayeredtransitionmetaloxidesbasedonoctahedralframeworkstructure,inwhichK+orH+liesbetweenlayersbuil…     

Core–Shell Carbon‐Coated CuO Nanocomposites: A Highly Stable Electrode Material for Supercapacitors and Lithium‐Ion Batteries

Herein we present a simple method for fabricating core–shell mesostructured CuO@C nanocomposites by utilizing humic acid (HA) as a biomass carbon source. The electrochemical performances of CuO@C nanocomposites were evaluated as an electrode material for supercapacitors and lithium‐ion batteries. CuO@C exhibits an excellent capacitance of 207.2 F g^?1 at a current density of 1 A g^?1 within a potential window of 0–0.46 V in 6 M KOH solution. Significantly, CuO electrode materials achieve remarkable capacitance retentions of approximately 205.8 F g^?1 after 1000 cycles of charge/discharge testing. The CuO@C was further applied as an anode material for lithium‐ion batteries, and a high initial capacity of 1143.7 mA h g^?1 was achieved at a current density of 0.1 C. This work provides a facile and general approach to synthesize carbon‐based materials for application in large‐scale energy‐storage systems.     

Preparation of a Reduced Graphene Oxide Wrapped Lithium‐Rich Cathode Material by Self‐Assembly

A lithium‐rich cathode material wrapped in sheets of reduced graphene oxide (RGO) and functionalized with polydiallyldimethylammonium chloride (PDDA) was prepared by self‐assembly induced from the electrostatic interaction between PDDA–RGO and the Li‐rich cathode material. At current densities of 1000 and 2000 mA g^?1, the PDDA–RGO sheet wrapped samples demonstrated increased discharge capacities, increasing from 125 to 155 mA h g^?1 and from 82 to 124 mA h g^?1, respectively. The decreased resistance implied by this result was confirmed from electrochemical impedance spectroscopy results, wherein the charge‐transfer resistance of the pristine sample decreased after wrapping with the PDDA–RGO sheets. The PDDA–RGO sheets served as a protective layer sand as a conductive material, which resulted in an improvement in the retention capacity from 56 to 81 % after 90 cycles.     

Ultrahigh Energy Density Realized by a Single‐Layer β‐Co(OH)2 All‐Solid‐State Asymmetric Supercapacitor

A conceptually new all‐solid‐state asymmetric supercapacitor based on atomically thin sheets is presented which offers the opportunity to optimize supercapacitor properties on an atomic level. As a prototype, β‐Co(OH)₂ single layers with five‐atoms layer thickness were synthesized through an oriented‐attachment strategy. The increased density‐of‐states and 100 % exposed hydrogen atoms endow the β‐Co(OH)₂ single‐layers‐based electrode with a large capacitance of 2028 F g^?1. The corresponding all‐solid‐state asymmetric supercapacitor achieves a high cell voltage of 1.8 V and an exceptional energy density of 98.9 Wh kg^?1 at an ultrahigh power density of 17 981 W kg^?1. Also, this integrated nanodevice exhibits excellent cyclability with 93.2 % capacitance retention after 10 000 cycles, holding great promise for constructing high‐energy storage nanodevices.