Electrodeposition of mesoporous semimetal and magnetic metal films from lyotropic liquid crystalline phases

Mesoporous semimetal bismuth film and magnetic metal nickel and cobalt thin films have been electrodeposited from hexagonal or lamellar structured lyotropic liquid crystalline phases with polyoxyethylene surfactant. The liquid crystalline templates are characterized by low-angle X-ray diffraction (XRD) and polarized-light optical microscopy (POM). The metal films are characterized by low-angle and wide-angle XRD, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The magnetic measurements on the mesoporous nickel and cobalt films are shown to have higher coercivity (Hc) than the nonporous polycrystalline films.     

Structural and magnetic properties of nano-crystalline FeCoNiN thin films

Iron cobalt nickel nitride (FeCoNiN) thin films are prepared by sol-gel spin coating route. The structural, magnetic and surface properties of the thin films are evaluated. The crystalline nature of thin films was enhanced upon annealing, leading to increased crystallite size. The X-ray diffraction shows mixed phases with crystallite size in the range of 20–26.93 nm. Thin films show ferromagnetism at room temperature. Coercivity and saturation magnetization are in the range of 642–716 Oe and 2.5–7.5 emu/cm³ respectively. Both coercivity and saturation magnetization increased with annealing of thin films. Magnetic properties are related to the crystallinity of thin films. The increase in crystallite size results into an increase of magnetic properties. Rectangular shaped particles are seen on the surface of thin films. The same type of grains can be seen on the surface of thin films which confirmed the formation of FeCoNiN as predicted by XRD. These novel thin films might be used in memory devices and optoelectronic applications.     

Fabrication of coaxial TiO2/Sb2S3 nanowire hybrids for efficient nanostructured organic-inorganic thin film photovoltaics

We report on low-cost, all solution fabrication of efficient air-stable nanostructured thin film photovoltaics comprised of n-type Sb(2)S(3) chemically deposited onto TiO(2) nanowire array films, forming coaxial Sb(2)S(3)/TiO(2) nanowire hybrids vertically oriented from the SnO(2):F coated glass substrate, which are then intercalated with poly(3-hexylthiophene) (P3HT) for hole transport and enhanced light absorption.     

Controlled growth of mesostructured crystalline iron oxide nanowires and Fe-filled carbon nanotube arrays templated by mesoporous silica SBA-16 film

The three-dimensional (3D) accessible pore structures (Imm space groups) of continuous mesoporous silica SBA-16 thin films have been prepared by a dip-coating technique in nonaqueous media under acidic conditions on indium-tin oxide glass (ITO). The films are oriented with the (111) crystal plane perpendicular to the surface of the film. On one hand, deposition of iron metal into the mesopores of SBA-16 films was achieved by using an electrochemical method. The Fe2O3 nanowire arrays were synthesized. The crystalline structures of porous Fe2O3 nanowires and nanorods were studied via TEM, SEM, and XRD. On the other hand, a small amount of Fe was deposited into the pores of the SBA-16 thin film as a catalyst, and carbon nanotube arrays formed inside the pores of SBA-16 film were fabricated by catalytic decomposition of acetylene at 700 degrees C. The second-order template synthesis method for preparing the ordered array of carbon nanotubes filled with Fe has been used. The carbon nanotubes are very uniform in diameter and length and are aligned vertically with respect to the SBA-16 film.     

Metallic Co4N Porous Nanowire Arrays Activated by Surface Oxidation as Electrocatalysts for the Oxygen Evolution Reaction

Designing highly efficient electrocatalysts for oxygen evolution reaction (OER) plays a key role in the development of various renewable energy storage and conversion devices. In this work, we developed metallic Co₄N porous nanowire arrays directly grown on flexible substrates as highly active OER electrocatalysts for the first time. Benefiting from the collaborative advantages of metallic character, 1D porous nanowire arrays, and unique 3D electrode configuration, surface oxidation activated Co₄N porous nanowire arrays/carbon cloth achieved an extremely small overpotential of 257 mV at a current density of 10 mA cm⁻², and a low Tafel slope of 44 mV dec⁻¹ in an alkaline medium, which is the best OER performance among reported Co‐based electrocatalysts to date. Moreover, in‐depth mechanistic investigations demonstrate the active phases are the metallic Co₄N core inside with a thin cobalt oxides/hydroxides shell during the OER process. Our finding introduces a new concept to explore the design of high‐efficiency OER electrocatalysts.     

Nanostructured black cobalt coatings for solar absorbers

Nanocrystalline black cobalt electrically deposited onto a steel substrate from aqueous solution was investigated. The influence of electrolyte composition and operating parameters on the appearance and optical properties of the coat was studied. The deposition conditions that ensure the highest solar absorptance were optimized. The chemical composition of fabricated thin films before and after annealing at 400 °C was determined by energy dispersive X‐ray analysis (EDS) and XPS technique. The crystal structure analysis showed that the bulk composition of the films was mainly cobalt oxide. The surface analysis reveals that the topmost surface layers of the films are made of different cobalt compounds confirming the multivalence state of Co on the surface with an oxidation state of ≥ + 2. Scanning electron microscope (SEM) observation indicated that the surface morphology was changed from dendritic structure to lamellar at higher current density. The black cobalt film showed soft magnetic characteristicsand excellent optical properties to transform solar energy into thermal energy. Copyright © 2008 John Wiley & Sons, Ltd.     

柔性不锈钢基底上一维TiO_2纳米线薄膜的制备及表征

采用直流磁控溅射的方法在柔性不锈钢基底(50μm)上沉积纯钛薄膜,后在NaOH碱溶液中经水热法制备了非钛基大长径比的一维TiO2纳米线薄膜,并通过场发射扫描电子显微镜(FESEM)、X射线衍射(XRD)、透射电子显微镜(TEM)以及光电化学的方法对不锈钢基一维TiO2纳米线薄膜进行了表征.结果表明,纯钛薄膜的致密度、结晶性能以及与基底的结合强度均随衬底温度的升高而加强;在10mol·L-1NaOH浓度下,生长一维TiO2纳米线结构的适宜温度为130-150℃;TiO2纳米线长度达到几个微米,直径在10-30nm之间,并且相互交叉生长,构成一个三维网络结构.此外,在Na2SO4溶液中对TiO2纳米线薄膜进行了线性扫描和瞬态光电流测试,结果表明,一维TiO2纳米线薄膜电极较TiO2纳米颗粒电极表现出更优异的光电化学性能.这种磁控溅射与水热反应相结合的方法,为非钛异质基底上制备一维TiO2纳米线薄膜提供了新的思路.     

Über analytische Untersuchungen an magnetischen Materialien

The mass determination of magnetic thin films by photometric and polarographic analysis is described. Iron is determinated with 1.10-phenanthroline, nickel with dimethylglyoxime, cobalt with 2-nitroso-1-naphthol, copper with 2,2-biquinoline and manganese-bismuth by polarography in triethanolamine solution. The relative error of the determinations is between 5 to 10%.     

Observation of the anisotropic photoinduced magnetization effect in Co-Fe Prussian blue thin films fabricated by using clay Langmuir-Blodgett films as a template

Thin films of cobalt-iron cyanide (Co-Fe Prussian blue) have been fabricated by means of the modified Langmuir-Blodgett (LB) method using a smectite clay mineral (montmorillonite). In this combined method, clay LB films play a template role in the formation of the Co-Fe Prussian blue thin layer. The films were revealed to possess a well-organized structure not only in perpendicular directions to the film surface but also in parallel directions to the film surface. The photoinduced electron transfer from the iron ion to the cobalt through the bridging cyanide in the films occurred at low temperature (8 K), similar to that in the bulk Co-Fe Prussian blue. The films clearly exhibited magnetic anisotropy with regards to the direction of the applied magnetic field. Moreover, the photoinduced magnetization effect in the films was also found to be anisotropic.     

Surface-enhanced Raman scattering from surfactant-free 3D gold nanowire networks substrates

A useful method for the fabrication of three-dimensional gold nanowire networks based on the chemical reduction of HAuCl4 with trisodium citrate was presented. The coverage of the 3D gold nanowire networks was tunable by altering precursor concentration. The as-prepared 3D gold nanowire networks could be used as surface-enhanced Raman scattering (SERS) substrates and examined by 4-aminothiophenol (4-ATP) as a probe molecules. Since the proposed strategy is simple, cost-effective and reproducible for the mass production of network-like gold films irrespective of the kinds of the underlying substrates, it is expected to play an important role in the development of surface plasmon-based analytical devices.     

Two‐Dimensional Boronate Ester Covalent Organic Framework Thin Films with Large Single Crystalline Domains for a Neuromorphic Memory Device

Despite the recent progress in the synthesis of crystalline boronate ester covalent organic frameworks (BECOFs) in powder and thin‐film through solvothermal method and on‐solid‐surface synthesis, respectively, their applications in electronics, remain less explored due to the challenges in thin‐film processability and device integration associated with the control of film thickness, layer orientation, stability and crystallinity. Moreover, although the crystalline domain sizes of the powder samples can reach micrometer scale (up to ≈1.5 μm), the reported thin‐film samples have so far rather small crystalline domains up to 100 nm. Here we demonstrate a general and efficient synthesis of crystalline two‐dimensional (2D) BECOF films composed of porphyrin macrocycles and phenyl or naphthyl linkers (named as 2D BECOF‐PP or 2D BECOF‐PN ) by employing a surfactant‐monolayer‐assisted interfacial synthesis (SMAIS) on the water surface. The achieved 2D BECOF‐PP is featured as free‐standing thin film with large single‐crystalline domains up to ≈60 μm² and tunable thickness from 6 to 16 nm. A hybrid memory device composed of 2D BECOF‐PP film on silicon nanowire‐based field‐effect transistor is demonstrated as a bio‐inspired system to mimic neuronal synapses, displaying a learning–erasing–forgetting memory process.     

Size-dependent thermodynamic properties of metallic nanowires

Analytical models for size-dependent melting temperature Tm(D), melting enthalpy DeltaHm(D), and surface energy gammasv(D) of metallic nanowires have been proposed in terms of the unified nanothermodynamical model where D denotes the diameter of nanowire. As D decreases, Tm(D), DeltaHm(D), and gammasv(D) functions are found to decrease almost with the same size-dependent trend. Due to the inclusion of the effect of dimensionality, the developed model can be applied to other low-dimensional systems. It is found that the ratio of depression of these thermodynamic parameters for spherical nanoparticle, nanowire, and thin film is 3:2:1 when D is large enough (>20h with h being the atomic diameter). The validity of the model is verified by the data of experiments, molecular dynamics simulations, and other theoretical models.     

ZnO-Al2O3 and ZnO-TiO2 core-shell nanowire dye-sensitized solar cells

We describe the construction and performance of dye-sensitized solar cells (DSCs) based on arrays of ZnO nanowires coated with thin shells of amorphous Al(2)O(3) or anatase TiO(2) by atomic layer deposition. We find that alumina shells of all thicknesses act as insulating barriers that improve cell open-circuit voltage (V(OC)) only at the expense of a larger decrease in short-circuit current density (J(SC)). However, titania shells 10-25 nm in thickness cause a dramatic increase in V(OC) and fill factor with little current falloff, resulting in a substantial improvement in overall conversion efficiency, up to 2.25% under 100 mW cm(-2) AM 1.5 simulated sunlight. The superior performance of the ZnO-TiO(2) core-shell nanowire cells is a result of a radial surface field within each nanowire that decreases the rate of recombination in these devices. In a related set of experiments, we have found that TiO(2) blocking layers deposited underneath the nanowire films yield cells with reduced efficiency, in contrast to the beneficial use of blocking layers in some TiO(2) nanoparticle cells. Raising the efficiency of our nanowire DSCs above 2.5% depends on achieving higher dye loadings through an increase in nanowire array surface area.     

Self-Assembly Anisotropic Magnetic Nanowire Films Induced by External Magnetic Field

Self-assembly generated materials induced by an external magnetic field have attracted considerable interest following the development of nanodevices. However, the fabrication of macroscopic and anisotropic magnetic films at the nanoscale remains a challenge. Here, anisotropic magnetic films are successfully prepared using a solution-based nanowire assembly strategy under a magnetic field. The assembly process is manipulated by changing the thickness of silica shell coated on the surface of magnetic nanowires. The anisotropic magnetic films show highly anisotropic magnetization under different angles of magnetic field and better magnetization properties than that of disordered magnetic films. The well-defined nanowire arrays enable magnetization anisotropic property which may be useful in the magnetic energy conversion technologies and biomedical sciences which lie far beyond those achievable with traditional magnetic materials.     

Epitaxial Growth and Thermoelectric Measurement of Bi2Te3/Sb Superlattice Nanowires

Superlattice nanowires are expected to show further enhanced thermoelectric performance compared with conventional nanowires or superlattice thin films. We report the epitaxial growth of high density Bi₂Te₃/Sb superlattice nanowire arrays with a very small bilayer thickness by pulse electrodeposition. Transmission electron microscopy, selected area electron diffraction and high resolution transmission electron microscopy were used to characterize the superlattice nanowires, and Harman technique was employed to measure the figure of merit (ZT) of the superlattice nanowire array in high vacuum condition. The superlattice nanowire arrays exhibit a ZT of 0.15 at 330 K, and a temperature difference of about 6.6 K can be realized across the nanowire arrays.     

Highly ordered thin films of 5,5'-bis(3'-fluoro-biphenyl-4-yl)-2,2' : 5',2'-terthiophene with two meso-phases

The growth process and phase state of 5,5'-bis(3'-fluoro-biphenyl-4-yl)-2,2'?:?5',2'- terthiophene (m-F2BP3T) thin films were investigated by atomic force microscopy (AFM), in-plane and out-of-plane X-ray diffraction (XRD), and selected area electron diffraction (SAED). Two meso-phases (thin film phases) of m-F2BP3T films on SiO(2) surface were obtained in the early stages. The m-F2BP3T films initially exhibited two-dimensional (2D) layers (≤4 ML) followed by three-dimensional (3D) island growth. The film structure evolved two thin film phases in the first four layers and the bulk phase was formed from the fifth layer, which occurred concomitantly with the change of the growth mode. Moreover, the variation of weak epitaxy growth behavior of ZnPc from 2D to 3D growth further reflects that the phase state of the first three layers is different from that of the fourth layer, in spite of ZnPc crystals showing just one orientation corresponding to commensurate epitaxy. The novel phase behavior is closely related to the synergistic effects of the outstanding soft matter properties, limited elasticity of organic molecules, and strain originating from the SiO(2) substrate. This study investigates novel phase behavior in organic thin films and provides significant insight into the mechanism of the phase transition.     

Controlled one-dimensional nanostructures in poly(3-hexylthiophene) thin film for high-performance organic field-effect transistors

With the aim of improving the field-effect mobilities in poly(3-hexylthiophene) (P3HT) thin film transistors, we controlled the nanostructures of P3HT thin film by changing the solvent vapor pressure in a spin-coating chamber during solidification. The transistors with P3HT thin films spin-coated under a high solvent vapor pressure (56.5 KPa), showing the one-dimensional nanowire morphologies, resulted in the relatively high field-effect mobilities (0.02 cm2/(V.s)) that are typically more than 1 order of magnitude higher than those prepared under ambient conditions, showing the featureless morphologies. This can be attributed to the higher solvent vapor pressure during film formation, providing the solvent is allowed to evaporate slowly and the degree of ordering within the P3HT crystalline domains is dramatically improved.     

A Highly Sensitive and Selective Non-enzymatic Hydrogen Peroxide Sensor Based on Nanostructured Co3O4 Thin Films Using the Sol-gel Method

In this work we report an easy and efficient way to fabricate nanostructured cobalt oxide (Co₃O₄) thin films as a non-enzymatic sensor for H₂O₂ detection. Co₃O₄ thin films were grown on ITO glass substrates via the sol-gel method and characterized with several techniques including X-ray diffraction, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and optical absorbance. The Co₃O₄ thin films’ performance regarding hydrogen peroxide detection was studied in a 0.1 M NaOH solution using two techniques, cyclic voltammetry (CV) and amperometry. The films exhibited a high sensitivity of 1450 μA.mM⁻¹.cm⁻², a wide linear range from 0.05 μM to 1.1 mM, and a very low detection limit of 18 nM. Likewise, the Co₃O₄ thin films produced showed an exceptional stability and a high selectivity.     

Cobalt Carbonate Hydroxide Nanowire Array on Ti Mesh: An Efficient and Robust 3D Catalyst for On‐Demand Hydrogen Generation from Alkaline NaBH4 Solution

In this work, for the first time, a cobalt carbonate hydroxide (Co(CO₃)_0.5(OH)?0.11 H₂O) nanowire array on Ti mesh (CHNA/Ti) was applied to drive the dehydrogenation of alkaline NaBH₄ solution for on‐demand hydrogen production. Compared with other nanostructured Co‐based catalyst systems, CHNA/Ti can be activated more quickly and separated easily from fuel solutions. This self‐supported cobalt salt nanowire array catalyst works as an efficient and robust 3D catalyst for the hydrolysis reaction of NaBH₄ with a hydrogen generation rate of 4000 mL min^?1 g_Co^?1 and a low apparent activation energy of 39.78 kJ mol^?1 and offers an attractive system for on‐demand hydrogen generation.     

Magnetoelectric Bi3.25Nd0.75Ti3O12–La0.6Ca0.4MnO3 composite thin films derived by SOL–GEL method

Magnetoelectric (ME) Bi_3.25Nd_0.75Ti₃O₁₂–La_0.6Ca_0.4MnO₃ (BNT–LCMO) composite thin films were deposited on Pt/Ti/SiO₂/Si(100) substrates by a simple SOL–GEL method and spin-coating process with two different deposition sequences: BNT/LCMO/Pt/Ti/SiO₂/Si(BLP) and LCMO/BNT/Pt/Ti/SiO₂/Si(LBP). Our results show the composite thin films exhibit both good ferroelectric and magnetic properties, as well as a ME effect. BLP thin films have larger maximum ME voltage coefficient values than LBP structured thin films. The deposition sequence has a notable effect on the ferroelectric and magnetic properties and ME coupling behavior of the bi-layer thin films.