The role of carbon support morphology in the formation of catalytic layer of solid-polymer fuel cell

The Pt/C catalysts with similar morphology of active catalytic phase (platinum nanoparticles), which were deposited on the supports with different types of carbon structures (Vulkan XC-72 carbon black, Taunit carbon tubes, and Timrex HSAG-300 carbon support with graphite structure), were fabricated by the method of electrochemical dispersion. The effect of the carbon structure type on the electrocatalytic properties of Pt/C catalysts was studied in their operation in the three-electrode cell and in-service in the membrane-electrode assembly of air-hydrogen solid-polymer fuel cell. The Pt/C catalyst based on the Vulkan XC-72 carbon support showed the best performance. The anisotropic shape of Taunit carbon nanotubes and the microstructure of Timrex HSAG-300 carbon support do not allow us to form a catalytic layer with a large active platinum surface area and a structure, which provides an effective ionic transport and mass exchange near the platinum surface.     

Performance of dye-sensitized solar cells with various carbon nanotube counter electrodes

Double-wall carbon nanotubes (DWCNTs), single-wall carbon nanotubes (SWCNTs), and multi-wall carbon nanotubes (MWCNTs) were investigated as an alternative for platinum in counter-electrodes for dye-sensitized solar cells. The counter-electrodes were prepared on fluorine-doped tin oxide glass substrates by the screen printing technique from pastes of carbon nanotubes and organic binder. The solar cells were assembled from carbon nanotubes counter-electrodes and screen printed anodes made from titanium dioxide. The cells produced with DWCNTs, SWCNTs or MWCNTs have overall conversion efficiencies of 8.0%, 7.6% and 7.1%, respectively. Electrochemical impedance spectroscopy measurements revealed that DWCNTs displayed the highest catalytic activity for the reduction of tri-iodide ions. The large surface area and superior chemical stability of the DWCNTs facilitated the electron-transfer kinetics at the interface between counter-electrode and electrolyte and yielded the lowest transfer resistance, thereby improving the photovoltaic activity. A short-term stability test at moderate conditions confirmed the robustness of solar cells based on the use of DWCNTs, SWCNTs or MWCNTs.

Formation of Pt/C catalysts on various carbon supports

Platinum catalysts with the active component content of 5–40 wt % on various carbon supports have been synthesized by the reductive hydrolysis of platinum chloro complexes. The degree of dispersion of the supported platinum decreases with an increasing weight percentage of the metal in the catalyst. The following mechanism of Pt/C catalyst formation is deduced from experimental data: H₂PtCl₆ adsorption on the support surface generates platinum nuclei, which then grow owing to the deposition of platinum ions under the action of an alkali and a reductant.     

甲烷干重整催化剂Ni/Al2O3表面积炭表征与分析

用蒸发法制备了Ni/Al2O3催化剂及浸渍法制备了Ni/α-Al2O3和Ni/γ-Al2O3催化剂, 并与商品天然气水蒸气重整催化剂Z118Y一起进行了甲烷干重整实验, 考察了各催化剂上表面积炭行为. 通过H2程序升温还原(H2-TPR)、BET(Brunauer-Emmett-Teller)比表面积分析、X射线衍射(XRD)、透射电镜(TEM)、热重-差式扫描量热(TG-DSC)、程序升温氢化(TPH)等表征手段对催化剂表面沉积炭的特性进行了表征. 结果表明, 各催化剂上至少存在三种形式的碳物种: 无定形碳、丝状碳及石墨碳. 由于载体性质不同, 各催化剂上沉积炭的种类及其含量有所差别. Z118Y、Ni/Al2O3及Ni/α-Al2O3催化剂上主要沉积丝状炭, 而Ni/γ-Al2O3催化剂上则主要是石墨碳. Ni/γ-Al2O3催化剂中金属Ni颗粒较小(小于15 nm)、粒径分布范围较窄、分散性较好, 能减少催化剂表面炭的沉积, 有效地抑制丝状碳的生长.     

Effects of carbon surface oxides on the dispersion of Pt/C catalysts prepared via adsorption of hexachloroplatinic acid: a new insight

Summary A new concept is advanced to explain some effects of oxygen-containing groups of the carbon surfaces on the dispersion of Pt/C catalysts prepared through the adsorption of H₂PtCl₆ onto porous carbon powders followed by the reduction with H₂. These groups alter the electrochemical properties of the support and, therefore, influence the nature and amount of the adsorbed catalyst precursors formed during a redox reaction between the carbon surface and H₂PtCl₆, that reflects on the dispersion of Pt/C. A way to account for their impact on platinum dispersion is offered. It allows revising and uniting many literature data related to this problem.     

The structure and characteristics of a PtCoCr nanosized polymetallic cathode catalyst on a carbon carrier

The paper presents X-ray and transmission electron microscopy data characterizing the structure of trimetallic PtCoCr catalysts synthesized on a disperse carbon carrier (carbon black KhS 72) and the influence of the structure on electrocatalytic activity in the reduction of oxygen in 0.5 M H₂SO₄. The mechanisms of oxygen reduction on platinum and trimetallic catalysts were shown to be similar. A higher activity of platinum contained in the trimetallic catalyst was caused by smaller PtCoCr/C catalyst surface coverage by oxygen-containing particles formed from water and interfering with the adsorption of molecular oxygen, which was, in turn, determined by the electronic structure of trimetallic system nanoparticles.     

0.1%Pt-0.02%Pd/不锈钢整体催化剂上丙酮氧化性能及稳定性(英文)

制备了0.1%Pt-0.02%Pd/不锈钢整体催化剂。选取不锈钢为该催化剂的载体,可克服传统γ-Al2O3和堇青石蜂窝载体热稳定性差的缺点。采用阳极氧化技术在不锈钢上自生长了结构致密的多孔阳极氧化膜,并在其上负载Pt和Pd制备得到挥发性有机物(VOCs)净化催化剂。结果表明,经500、800和1000℃不同温度焙烧后,该催化剂完全氧化丙酮的温度分别为160、160和200℃。该催化剂表现出以下优点:(a)高温稳定性能好;(b)低温催化活性高;(c)贵金属负载量低。通过SEM和EDX等技术对该催化剂的结构及活性组分分散情况进行了表征。     

Effect of preparation methods on Pt/alumina catalysts for the hydrogen iodide catalytic decomposition

Three kinds of Pt/alumina catalysts were prepared by impregnation-hydrogen reduction,impregnation-hydrazine reduction and electroless plating methods.Their differences in the structures,specific areas and particle sizes were characterized by XRD,BET and TEM,respectively.Furthermore,their catalytic activities for the hydrogen iodide(HI)decomposition were evaluated in a fixed bed reactor.The results show that the catalyst 5%Pt/Al_2O_3 prepared by the electroless plating has the optimum catalytic properties...     

The electrochemical activity of two binary alloy catalysts toward oxygen reduction reaction in 0.1 M KOH

The platinum group metals (Pt, Ir and Ru) and the carbide-derived carbon support with the very high specific surface area were used to synthesise the low noble metal loading Pt-C, IrPt-C and RuPt-C alloy catalysts. The alloying of the platinum group metals in the studied catalysts was proved by the several independent physical characterization methods like: the X-ray diffraction, time of flight secondary ion mass-spectrometry, X-ray photoelectron spectroscopy, scanning and transmission electron microscopy. The electrocatalytic activity toward oxygen reduction reaction of the synthesised catalysts in an alkaline solution was studied and compared with the commercially available Pt-Vulcan. The combined and detail approach using the transmission electron microscopy and inductively coupled plasma mass spectrometry for estimation of the surface area of metal particles is provided. The noticeably higher calculated mass corrected and specific kinetic current density values for Pt-C catalyst were established. For IrPt-C and RuPt-C alloy catalysts, mass corrected current density values are comparable with the commercial Pt-Vulcan. The specific kinetic current density values increase in the following sequence: RuPt-C < IrPt-C < Pt-Vulcan < Pt-C.     

新型单壁碳纳米管采样吸附剂性能的评价

研究了单壁碳纳米管(SWCNTs)作为新型采样吸附剂的性能和效果,并应用于空气中挥发性有机化合物的分析测定。结果表明,单壁碳纳米管具有较大的比表面积,与经典Tenax TA吸附剂相比,对低碳数挥发性强的有机化合物回收率高,有更强的吸附能力;空白实验表明,SWCNTs易获得较低本底,具有化学惰性和疏水特性,采样时水的干扰小。当湿度增加时在误差允许的范围内准确度不受影响;实验测定具有较大的穿透容量和安全采样体积。将单壁碳纳米管吸附剂实际应用于大气中挥发性有机化合物的测定,通过与经典吸附剂Tenax TA相比,更适于采集大气中的挥发性有机化合物。     

铁氮掺杂对石墨烯担载铂催化剂氧还原反应活性的影响

高氧还原活性担载铂催化剂的研发是加快质子交换膜燃料电池商业化进程的主要手段之一。以石墨烯为碳源,1,10-菲啰啉为氮源,FeCl3为铁源,用浸渍法制备铁氮掺杂石墨烯(Fe/N-G)载体,并通过乙二醇还原法获得PtFe/N-G催化剂,探究铁氮原子的引入对石墨烯担载铂催化剂氧还原反应催化活性的影响。采用X射线衍射、比表面积和孔径分布测试、X射线光电子能谱等表征手段对载体及催化剂结构进行表征,使用电化学方法对载体和催化剂的氧还原反应活性进行测试。结果表明,PtFe/N-G催化剂的氧还原反应起始电位及半波电位分别为0.96 V、0.83 V,优于相同Pt担载量的商业20%Pt/C催化剂。铁氮掺杂后,石墨烯载体具有较大的孔径更有利于氧还原反应过程中生成物与反应物的传递,PtFe/N-G催化剂中存在吡啶氮和Fe-N型氮与铂纳米颗粒的协同催化,以及铂纳米颗粒与铁氮掺杂石墨烯载体间的相互作用,是PtFe/N-G催化剂具有优异的氧还原催化活性的可能原因。     

Mesopore‐controllable Carbon Aerogel and their Highly Loaded PtRu Anode Electrocatalyst for DMFC Applications

Catalyst loading and layer thickness are crucial factors to enhance the cell performance and to reduce cost of membrane electrode assemblies (MEAs). Outstanding properties, such as large surface area to disperse metal nanoparticles and sufficient pore volume and size, is needed in utilization of fuel cell. Carbon aerogels are one of the good candidates that meets the above conditions. Those are synthesized by polycondensation reaction of resorcinol and formaldehyde (RF) polymer, supercritical drying to keep pore skeleton structure caused by capillary force and calcination of RF polymer in nitrogen atmosphere to be controllable meso pore (2～43 nm) as role of support for electric conductor and dispersion of metal nanoparticles. In order to utilization of anode catalyst in direct methanol fuel cell, highly loaded (80 weight percent) platinum and ruthenium onto carbon aerogel are synthesized by Bönnemann colloid method. The single cell test of carbon aerogel supported PtRu anode catalyst is performed and over 40 nm pore sized‐catalysts are the best performance due to sufficient surface area to anchor uniform and small metal nanoparticles and good pathway to drive fuel and outgas even though PtRu nanoparticles are anchored on the outer surface of carbons.     

高活性和耐久性非铂氧还原催化剂的研究进展（英文）

质子交换膜燃料电池(PEMFCs)阴极氧还原反应(ORR)动力学迟缓,需要消耗大量的贵金属催化剂,这限制了其商业化应用。目前,原子级分散的M-N-C (M=Fe,Co,Mn等)催化剂受到人们青睐,有望替代铂催化剂。在过去的几十年里,M-N-C催化剂取得了很大的进步,具有优异的ORR活性,而且燃料电池初始性能有希望接近传统的Pt/C催化剂。然而,这些高活性的Fe-N-C催化剂在燃料电池实际工作条件下的稳定性比较差。这篇综述总结了在高效氧还原M-N-C催化剂方面的最近进展,主要概述了作者课题组在限域策略和自旋调控方面的贡献。此外,我们还总结了几种提高活性的有效方法以及近期的关于揭示M-N-C催化剂的降解机制的认识,如金属浸出、碳腐蚀、质子化和微孔淹没都会造成催化剂降解。为改善M-N-C催化剂的寿命,我们概括了文献中的缓解策略,包括控制催化剂中S1/S2位点、使用非铁基催化剂、增强金属氮键、改善碳载体的耐腐蚀性和使用质子缓冲液等。最后,提出了目前原子级分散的M-N-C催化剂的存在的挑战和可能的解决方案。     

Influence of electronic state and dispersion of platinum particles on the conversion and selectivity of hydrogenation of an α,β-unsaturated aldehyde in supercritical carbon dioxide

The selective hydrogenation of cinnamaldehyde (CAL) was investigated using silica supported platinum catalysts in supercritical carbon dioxide. Selectivity to cinnamyl alcohol (COL) is enhanced as Pt⁰/Pt²⁺ ratio increases; namely, zero-valent metallic surface is beneficial to the formation of COL compared with less reduced surface. The influence of Pt⁰/Pt²⁺ ratio is more significant on the selectivity than on the total conversion. For the catalyst with small Pt⁰/Pt²⁺ value, the selectivity also depends on the degree of platinum dispersion. The selectivity to COL is higher for higher degree of platinum dispersion. The CO₂ pressure did not affect the conversion and selectivity so much.     

Pt/Pd/C catalysts with ultra low platinum content for oxygen reduction reaction

The activity of Pt/Pd/C ETEK catalysts of the core-shell type with an ultralow content of platinum (0.5–15 μg cm^?2) based on a commercial palladium catalyst is shown to exceed the activity of commercial Pt/C ETEK catalysts in the oxygen reduction reaction. The activity sharply increases with the decrease in the platinum content down to values corresponding to monolayer and submonolayer of platinum on palladium. This dependence wasn’t observed for the same amounts of platinum deposited on the carbon support Vulcan XC-72. This makes it possible to conclude that the most probable factor responsible for the high catalytic activity of Pt/Pd/C ETEK is the effect of palladium on the electronic properties of platinum rather than the effect of structural modification of the platinum deposit induced by the decrease in the platinum amount deposited on a foreign metal or a carbon support.     

一维/二维复合碳载体组成对Pd催化剂甲醇氧化性能的影响

采用固相-液相两步混合法制备了由碳纳米管（CNTs）和石墨烯纳米片（GNPs）组成的CNTs-GNPs复合载体。以乙二醇还原法将Pd纳米粒子沉积于复合碳载体上,制得Pd/CNTs-GNPs催化剂。以透射电子显微镜、X射线衍射及X射线光电子能谱表征催化剂的形貌、组成和结构;以电化学方法考察催化剂的甲醇电氧化性能。结果表明,Pd/CNTs-GNPs（1/4）（GNPs质量分数为1/4）催化剂具有较大的电化学表面积和较高的甲醇电氧化活性,其甲醇氧化峰电流密度可达Pd/CNTs催化剂的1.97倍。催化剂的高活性得益于CNTs-GNPs载体的一维/二维复合结构使Pd纳米粒子具有良好的分散性能。计时电流实验表明,与单一载体负载Pd催化剂相比,复合载体负载Pd催化剂具有较强的抗中毒能力。     

Surface site density and utilization of platinum group metal (PGM)-free Fe–NC and FeNi–NC electrocatalysts for the oxygen reduction reaction

Pyrolyzed iron-based platinum group metal (PGM)-free nitrogen-doped single site carbon catalysts (Fe–NC) are possible alternatives to platinum-based carbon catalysts for the oxygen reduction reaction (ORR). Bimetallic PGM-free M₁M₂–NC catalysts and their active sites, however, have been poorly studied to date. The present study explores the active accessible sites of mono- and bimetallic Fe–NC and FeNi–NC catalysts. Combining CO cryo chemisorption, X-ray absorption and ⁵⁷Fe Mössbauer spectroscopy, we evaluate the number and chemical state of metal sites at the surface of the catalysts along with an estimate of their dispersion and utilization. Fe L_3,2-edge X-ray adsorption spectra, Mössbauer spectra and CO desorption all suggested an essentially identical nature of Fe sites in both monometallic Fe–NC and bimetallic FeNi–NC; however, Ni blocks the formation of active sites during the pyrolysis and thus causes a sharp reduction in the accessible metal site density, while with only a minor direct participation as a catalytic site in the final catalyst. We also use the site density utilization factor, ϕ_{SDsurface/bulk}, as a measure of the metal site dispersion in PGM-free ORR catalysts. ϕ_{SDsurface/bulk} enables a quantitative evaluation and comparison of distinct catalyst synthesis routes in terms of their ratio of accessible metal sites. It gives guidance for further optimization of the accessible site density of M–NC catalysts.

The gravimetric surface density and ORR catalytic turnover frequency of Fe–NC and Fe/Ni–NC catalysts were investigated. Both catalysts feature chemically identical Fe sites, but the presence of Ni lowered the gravimetric surface density of Fe sites.     

High activity carbide supported catalysts for water gas shift

Nanostructured carbides are refractory materials with high surface areas that could be used as alternatives to the oxide materials that are widely used as support materials for heterogeneous catalysts. Carbides are also catalytically active for a variety of reactions, offering additional opportunities to tune the overall performance of the catalyst. In this paper we describe the synthesis of molybdenum carbide supported platinum (Pt/Mo(2)C) catalysts and their rates for the water gas shift reaction. The synthesis method allowed interaction of the metal precursor with the native, unpassivated support. The resulting materials possessed very high WGS rates and atypical Pt particle morphologies. Under differential conditions, rates for these catalysts were higher than those for the most active oxide-supported Pt catalysts and a commercial Cu-Zn-Al catalyst. Experimental and computational results suggested that active sites on the Pt/Mo(2)C catalysts were located on the perimeter of the Pt particles and that strong interactions between Pt and the Mo(2)C surface gave rise to raft-like particles.     

Single-wall carbon nanotube-based proton exchange membrane assembly for hydrogen fuel cells

A membrane electrode assembly (MEA) for hydrogen fuel cells has been fabricated using single-walled carbon nanotubes (SWCNTs) support and platinum catalyst. Films of SWCNTs and commercial platinum (Pt) black were sequentially cast on a carbon fiber electrode (CFE) using a simple electrophoretic deposition procedure. Scanning electron microscopy and Raman spectroscopy showed that the nanotubes and the platinum retained their nanostructure morphology on the carbon fiber surface. Electrochemical impedance spectroscopy (EIS) revealed that the carbon nanotube-based electrodes exhibited an order of magnitude lower charge-transfer reaction resistance (R(ct)) for the hydrogen evolution reaction (HER) than did the commercial carbon black (CB)-based electrodes. The proton exchange membrane (PEM) assembly fabricated using the CFE/SWCNT/Pt electrodes was evaluated using a fuel cell testing unit operating with H(2) and O(2) as input fuels at 25 and 60 degrees C. The maximum power density obtained using CFE/SWCNT/Pt electrodes as both the anode and the cathode was approximately 20% better than that using the CFE/CB/Pt electrodes.     

流化床反应器中不同Ni/Al2O3催化剂上CH4-CO2重整反应性能的比较研究

采用浸渍法、溶胶 凝胶过程与普通干燥、超临界干燥过程相结合的方法制备了三种20%的NiO-Al2O3体系催化剂，利用BET、XRD、H2 TPR、H2-TPD等方法对各催化剂样品物化性质进行了表征，并考察了催化剂在流化床反应器中CH4-CO2重整反应的催化性能。研究结果表明，经923K焙烧后气凝胶催化剂中镍与载体间作用力最强，主要为固定NiO和尖晶石NiAl2O4结构，而浸渍型催化剂和干凝胶催化剂中镍与载体间作用力较弱。三种催化剂中，气凝胶催化剂具有比表面积较大、堆密度较低、Ni还原度及分散度较高的特点。它在流化床反应器中所形成的聚团流态化状态具有较高的床层膨胀率，大量多孔疏松状的纳米颗粒聚团在床内的循环运动有效地提高了传质效率，能使得生成的沉积炭快速得到气化，从而抑制了催化剂失活；对于浸渍型催化剂和干凝胶催化剂，流化床反应器中床层膨胀率较低、颗粒循环量较少、传质效率较低，易于造成催化剂表面积炭失活。经用TG和XRD等方法对反应后催化剂分析表征，证明催化剂表面石墨碳的沉积是导致浸渍型催化剂和干凝胶催化剂失活的主要原因。