三重态类硅烯HB＝SiLiF的结构及其与R—H(R=F,OH,NH_2)的插入反应

用密度泛函理论(DFT)和二次组态相互作用(QCISD)方法研究了三重态类硅烯HB=SiLiF的结构及其与RH(R=F,OH,NH2)的插入反应.计算结果表明,类硅烯HB=SiLiF有三种平衡构型,其中四元环构型能量最低,是其存在的主要构型.HB=SiLiF与HF,H2O和NH3发生插入反应的机理相同.QCISD/6-311++G(d,p)//B3LYP/6-311+G(d,p)计算的三个反应的势垒分别为124.85,140.67和148.16kJ·mol-1,反应热分别为-2.22,20.08和23.22kJ·mol-1.相同条件下发生插入反应时,反应活性都是H—FH—OHH—NH2.     

吡啶-BH~3相互作用复合物的理论研究

对吡啶-BH~3复合物分别用MP2/6-31+G^*和B3LYP/6-31+G^*进行理论计算以预测该复合物的构型及解离能，得到四种构型，在MP2优化构型基础上作CCSD/6-31+G^*单点能量计算以验证MP2与B3LYP结果的可靠性，然后用B3LYP作振动频率分析，计算了各构型的垂直电离势，最后用更大基组作单点能量计算和自然键轨道(NBO)分析。结果表明，N-B直接相连的构型最稳定，其解离能为141.50kJ/mol,MP2和B3LYP对N-H接近的构型结果相关较大，另外两种构型稳定性介于二者之间，解离能分别为15.18kJ/mol,14.06kJ/mol(MP2/6-31+G^*)。     

G3(QCI)模型化学方法

建立了非微扰外推模式下的几种G3(QCI)方法：G3(QCI/fu1)、G3(QCI/fu2)、G3(QCI/ful)//B3PW91和G3(QCI/fu2)//B3PW91.其中,电子能量用QCISD(T,FC)/G3large直接计算,芯电子相关能分别在MP2/6-31G(d)和MP2/6-31G(d,p)级别上计算,对125个G2-1 test set 的计算结果表明,总体精度与G3和G3 //B3LYP相当;平均绝对偏差分别为4.370、4.389、4.061和4.022kJ mol-1,相应G3和G3//B3LYP分别为4.27和4.05kJ mol-1.文章提出的方法排除了G3中外推办法的不确定因素,且更适用于非平衡几何构型体系能量的定量计算。     

CH3F与C2H3反应机理的理论研究

采用密度泛函B3LYP/6-311G(d,p)方法对CH3F与C2H3的反应体系进行了理论研究,获得了反应的势能面信息及可能的微观机理.在QCISD(T)/6-311++G(d,p)水平上精确计算了各反应物种的单点能.结果表明,除抽提氢反应外,标题反应还存在抽提氟(R1)、消氟化氢(R2)、消氢(R3)和自由基形成(R4)四类反应.在QCISD(T)/6-311++G(d,p)//B3LYP/6-311G(d,p)水平上,R1,R2,R3和R4反应的能垒分别是163.9,152.2,209.8和224.2kJ·mol-1,相应反应能为-56.6,-164.3,-2.7和-156.0kJ·mol-1,所有反应均放热,为热力学允许的反应.     

Cl+F2→ClF+F和F+ClF′→ClF+F′反应机理的密度泛函理论研究

用密度泛函理论(DFT)B3LYP方法, 在6-311G基组下,计算研究了反应Cl+F2→ClF+F和对称反应F+ClF′→ClF+F′的机理。求得前者的过渡态为三角形,活化能为15.57 kJ*mol-1;后者的过渡态为线形和三角形,活化能分别为11.52和196.25 kJ*mol-1。结果均经过振动分析和IRC计算验证。     

自由基HO2与C2H2反应势能面的理论研究

应用量子化学从头计算和密度泛函理论(DFT)对HO2+C2H2反应体系的反应机理进行了研究.在B3LYP/6-311G**和CCSD(T)/6-311G**水平上计算了HO2+ C2H2反应的二重态反应势能面.计算结果表明,主要反应方式为自由基HO2的H原子和C2H2分子中的C原子结合,经过一系列异构化,最后分解得到主要产物P1 (CH2O+ HCO).此反应是放热反应,化学反应热为-321.99 kJ·mol-1.次要产物为P2 (CO2 +CH3),也是放热反应.     

气相中O3与HSO自由基间的氢键复合物

气相中O3与HSO自由基之间的相互作用及其反应在大气化学中非常重要.在DFT-B3LYP/6-311++G**和MP2/6-311++G**水平上求得O3+HSO复合物势能面上的稳定构型,B3LYP方法得到了三种构型(复合物Ⅰ,Ⅱ和Ⅲ),而MP2方法只能得到一种构犁(复合物Ⅱ).在复合物Ⅰ和Ⅲ中,HSO单元中的1H原子作为质子供体.与O3分子中的端基O原子作为质子受体相互作用,形成红移氢键复合物;而在复合物Ⅱ中,虽与复合物Ⅰ和Ⅲ中具有相间的质子供体和质子受体,却形成了蓝移氢键复合物.B3LYP/6-311++G**水平上计算的单体间相互作用能的计算考虑了基组重甍误差(BSSE)和零点振动能(ZPVE)校正,其值在-3.37到-4.55 kJ·mol-1之间.采用自然键轨道理论(NBO)对单体间相互作用的本质进行了考查,并通过分子中原子理论(AIM)分析了三种复合物中氢键的电子密度拓扑性质.     

丁烯和丁烷自由基阳离子的分子结构和超精细结构的 理论研究

用密度函数理论B3LYP方法和6-31G(d,p),6-311G(d,p)及6-311+G(d,p)基组，分别对1-C4H^+~8,2-C4H^+~8和C4H^+~10进行了构型优化和频率分析计算，预言1-C4H^+~8具有非平面构型，与以往报道的从头算和密度函数理论计算结果不同。在各自由基阳离子的B3LYP构型上，进行了B3LYP、MP2及MRSDCI方法的超精细偶合常数计算，得到了比以往更好的结果，特别是MP2/B3LYP计算值是至今与实验值符合得最好的理论计算结果。     

1, 2-二硒方酸气相酸性和芳香性的理论研究

在RHF/6-311G^*^*水平优化得到1,2-二硒方酸(3,4-二羟基-3-环丁烯-1,2-二硒酮)三种平面构象异构体的平衡几何构型。进一步用MP2(full)/6-311G^*//RHF/6-311G^*^*方法计算三种异构体的单点能量,发现ZZ型异构体是能量最低构象,且ZZ和ZE型能量非常接近。用优化的最稳定构象ZZ型异构体在RHF/6-311G^*^*//RHF/6-311G^*^*,RHF/6-311+G^*^*//RHF/6-311+G^*^*,MP2(full)/6-311+G^*^*//RHF/6-311+G^*^*和B3LYP/6-311+G^*^*//B3LYP/6-311+G^*^*水平计算其气相酸性[ΔGⅲ~(~2~9~8~K~)]和同键反应芳香性稳定化能(HASE)。用基团加和法(groupincrementapproach)在RHF/6-311+G^*^*//RHF/6-311+G^*^*和B3LYP/6-311+G^*^*//B3LYP/6-311+G^*^*水平计算其磁化率增量(Λ)。计算结果指出标题化合物的键长发生了平均化,同键反应芳香性稳定化能和磁化率增量均为负值,表明它具有芳香性,实现了标题化合物芳香性的几何、能量和磁性的判定。     

F原子与瞬态自由基CH_2SH反应的理论研究

用量子化学从头算和密度泛函理论（DFT）对F原子与自由基CH_2SH在势能面上 的反应进行了研究。在B3LYP/6-311G水平上计算出了各物种的优化构型、振动频率 和零点振动能(ZPVE);各物种的总能量由B3LYP/6-311 + G(2df, pd)//B3LYP/6- 311G计算,另外对反应物和产物还计算了其G3能量。结果表明：首先F通过与C或S 结合的两种途径与CH_2SH相配位,再通过H（4）原子转移形成甲基,然后甲基再旋 转,甲基中H（4）原子最终与F结合,反应产物为HF和CH_2S。反应为放热反应,分 别为ΔH_r = -370.7 kJ/mol (DFT)和-396.94 kJ/mol (G3)。此外依据计算出的反 应热,可得自由基·CH_2SH的生成热Δ_fH°_(298.15) = 146.44 kJ/mol (DFT), 而Δ_fH°_0 = 167.36 kJ/mol (G3)。它们与以前的实验和理论值是一致的。     

Corannulene as a Lewis base: computational modeling of protonation and lithium cation binding.

A computational modeling of the protonation of corannulene at B3LYP/6-311G(d,p)//B3LYP/6-311G(d,p) and of the binding of lithium cations to corannulene at B3LYP/6-311G(d,p)//B3LYP/6-31G(d,p) has been performed. A proton attaches preferentially to one carbon atom, forming a sigma-complex. The isomer protonated at the innermost (hub) carbon has the best total energy. Protonation at the outermost (rim) carbon and at the intermediate (bridgehead rim) carbon is less favorable by ca. 2 and 14 kcal mol(-)(1), respectively. Hydrogen-bridged isomers are transition states between the sigma-complexes; the corresponding activation energies vary from 10 to 26 kcal mol(-)(1). With an empirical correction obtained from calculations on benzene, naphthalene, and azulene, the best estimate for the proton affinity of corannulene is 203 kcal mol(-)(1). The lithium cation positions itself preferentially over a ring. There is a small energetic preference for the 6-ring over the 5-ring binding (up to 2 kcal mol(-)(1)) and of the convex face over the concave face (3-5 kcal mol(-)(1)). The Li-bridged complexes are transition states between the pi-face complexes. Movement of the Li(+) cation over either face is facile, and the activation energy does not exceed 6 kcal mol(-)(1) on the convex face and 2.2 kcal mol(-)(1) on the concave face. In contrast, the transition of Li(+) around the corannulene edge involves a high activation barrier (24 kcal mol(-)(1) with respect to the lowest energy pi-face complex). An easier concave/convex transformation and vice versa is the bowl-to-bowl inversion with an activation energy of 7-12 kcal mol(-)(1). The computed binding energy of Li(+) to corannulene is 44 kcal mol(-)(1). Calculations of the (7)Li NMR chemical shifts and nuclear independent chemical shifts (NICS) have been performed to analyze the aromaticity of the corannulene rings and its changes upon protonation.     

The C7-C10 cycloalkanes revisited

The conformers of cycloheptane through cyclodecane have been examined at the B3LYP/6-311+G* and MP2/6-311+G* theoretical levels, with some additional calculations at the CCD/6-311+G* and CCSD(T)/6-311++G** levels. With cyclooctane, B3LYP predicts that the boat-chair and crown conformers have similar energies, whereas MP2 and CCSD(T) predict that the crown conformer is 2 kcal/mol higher in energy. The latter is in agreement with the electron diffraction data. With cyclononane, B3LYP predicts that two of the higher-energy conformers found in molecular mechanics calculations should convert to one of the lower-energy conformers. However, MP2/6-311+G* optimizations find them to be true minima on the potential energy surface. B3LYP systematically predicts larger C-C-C bond angles for these compounds than either MP2 or CCD. The results of molecular mechanics MM4 calculations are generally in good agreement with those obtained using MP2.     

CH_3SH和CH_3SLi分子间的锂键和氢键共存型相互作用

在CH3SLi+CH3SH势能面上求得锂键和氢键共存型复合物的两种稳定构型.频率分析表明,与单体相比复合物中S(5)—Li(6)键伸缩振动频率发生红移,而C(8)—H(10)键伸缩振动频率发生蓝移.经B3LYP/6-311++G**,MP2/6-311++G**及MP2/AUG-CC-PVDZ水平计算的含基组重叠误差(BSSE)校正的复合物Ⅰ中相互作用能分别为-58.99,-57.87和-62.89kJ·mol-1.采用自然键轨道(NBO)理论,分析了复合物中单体轨道间的电荷转移,电子密度重排及其与相关键键长变化的本质等.采用分子中的原子(AIM)理论分析了复合物中氢键和锂键的电子密度拓扑性质.在极化连续模型(PCM)下,考察了溶剂化效应.结果表明,所考察的水、二甲亚砜、乙醇和乙醚等四种溶剂均使单体间的相互作用能增大,且溶剂对复合物中的锂键结构及其振动频率具有显著的影响,而对复合物中的氢键的振动频率影响不大.     

Complexes between lithium cation and diphenylalkanes in the gas phase: the pincer effect

The gas-phase lithium cation basicities (LCB values, Gibbs free energies of binding) of alpha,omega-diphenylalkanes Ph-(CH(2))(n)-Ph (n=2, 3, or 7) and 1,1-diphenylethane Ph-CH(Me)-Ph were investigated by means of Fourier-transform ion cyclotron resonance (FTICR) mass spectrometry. Their structures, and those of the corresponding Li(+) complexes were optimized at the B3LYP/6-31G(d) level and their relative stabilities calculated at the B3LYP/6-311+G(3df,2p)//B3LYP/6-31G(d) level. Whereas the most stable conformers of the free diphenylalkanes were found to adopt a completely stretched aliphatic chain connecting the two benzene rings, the most stable Li(+) complexes correspond to conformers in which the alkali metal cation interacts simultaneously with both benzene rings through the folding of the aliphatic chain ("pincer effect"). This chelation brings about a significant enhancement of the Li(+) binding enthalpies (LBE values), which were calculated to be approximately 75 kJ mol(-1) higher than those evaluated for conventional (singly coordinated) pi complexes in which the metal cation interacts with only one of the benzene rings. The increase of the corresponding lithium cation basicities, however, (Gibbs free energies of Li(+) binding, LCB values) was calculated to be smaller by approximately 15 kJ mol(-1) as the pincer effect is entropically disfavored. The good agreement between the calculated LCB values, assuming a statistical distribution of the different conformers present in the gas phase, and the experimental LCB values measured by means of FTICR mass spectrometry are considered indirect evidence of the existence of the pincer effect.     

Isomerization pathways from the norbornadiene to the cycloheptatriene radical cation by opening a bridgehead-methylene bond: a theoretical investigation

Three skeletal rearrangement channels for the norbornadiene (N*+) to the 1,3,5-cycloheptatriene (CHT*+) radical cation conversion, initialized by opening a bridgehead-methylene bond in N*+, are investigated using the quantum chemical B3LYP, MP2 and CCSD(T) methods in conjunction with the 6-311 +G(d,p) basis set. Two of the isomerizations proceed through the norcaradiene radical cation (NCD*+), either through a concerted path (N*+ - NCD*+), or by a stepwise mechanism via a stable intermediate (N*+ - I1 - NCD*+). At the CCSD(T)/6-311 +G(d,p)//B3LYP/6-311 +G(d,p) level, the lowest activation energy, 28.9 kcal mol(-1), is found for the concerted path whereas the stepwise path is found to be 2.3 kcal mol(-1) higher. On both pathways, NCD*+ rearranges further to CHT*+ with significantly less activation energy. The third channel proceeds from N*+ through I1 and then directly to CHT*+, with an activation energy of 37.1 kcal mol(-1). The multi-step channel reported earlier by our group, which proceeds from N*+ to CHT*+ via the quadricyclane and the bicyclo[2.2.1]hepta-2-ene-5-yl-7-ylium radical cations, is 4.6 kcal mol(-1) lower than the most favorable path of the present study. If the methylene group is substituted with C(CH3)2, however, the concerted path is estimated to be 5.6 kcal mol(-1) lower than the corresponding substituted multi-step path at the B3LYP/6-311+(d,p) level. This shows that substitution of particular positions can have dramatic effects on altering reaction barriers in the studied rearrangements. We also note that identical energies are computed for CHT*+ and NCD*+ whereas, in earlier theoretical investigations, the former was reported to be 6-17 kcal mol(-1) more stable than the latter. Finally, a bent geometry is obtained for CHT*+ with MP2/6-311 +G(d,p) in contradiction with the planar conformation reported for this cation in earlier computational studies.     

A theoretical study on the mechanism of the addition reaction between carbene and epoxyethane

The mechanism of addition reaction between carbene and epoxyethane has been investigated employing the MP2 and B3LYP/6-311+G* levels of theory. Geometry optimization, vibrational analysis, and energy property for the involved stationary points on the potential energy surface have been calculated. Based on the calculated results at the MP2/6-311+G* level of theory, it can be predicted that there are two reaction mechanisms (1) and (2). In the first reaction carbene attacks the atom O of epoxyethane to form an intermediate 1a (IM1a), which is a barrier-free exothermic reaction. Then, IM1a can isomerize to IM1b via a transition state 1a (TS1a), where the potential barrier is 48.6 kJ/mol. Subsequently, IM1b isomerizes to a product epoxypropane (Pro1) via TS1b with a potential barrier of 14.2 kJ/mol. In the second carbene attacks the atom C of epoxyethane firstly to form IM2 via TS2a. Then IM2 isomerizes to a product allyl alcohol (Pro2) via TS2b with a potential barrier of 101.6 kJ/mol. Correspondingly, the reaction energies for the reactions (1) and (2) are −448.4 and −501.6 kJ/mol, respectively. Additionally, the orbital interactions are also discussed for the leading intermediate. The results based on the B3LYP/6-311+G* level of theory are paralleled to those on the MP2/6-311+G* level of theory. Furthermore, the halogen and methyl substituent effects of H₂C: on the two reaction mechanisms have been investigated. The calculated results indicate that the introductions of halogen or methyl make the addition reaction difficult to proceed.     

类锗烯H2C=GeLiCl与RH(R=F,OH, NH2)的插入反应

采用DFT B3LYP和QCISD方法研究了不饱和类锗烯H2C=GeLiCl与RH(R=F, OH, NH2)的插入反应. 在B3LYP/6-311+G(d,p)水平上优化了反应势能面上的驻点构型. 结果表明, H2C=GeLiCl与HF、H2O 或NH3发生插入反应的机理相同. QCISD/6-311++G(d,p)//B3LYP/6-311+G(d,p)计算的三个反应的势垒分别为173.53、194.48和209.05 kJ·mol-1, 反应热分别为60.18、72.93和75.34 kJ·mol-1. 相同条件下发生插入反应时, 反应活性顺序都是H—F>H—OH>H—NH2.     

FC(O)O自由基与NO2反应的量子化学研究

用量子化学DFT, MP2, G3和G3MP2方法对FC(O)O自由基与NO₂的反应机理进行了理论研究. 优化了反应势能面上各驻点的几何结构, 通过内禀反应坐标(IRC)计算和振动分析, 确认了反应中的过渡态, 并用过渡态理论(TST)计算了相关反应的速率常数.     

A theoretical study of nonlinearity in heterocyclic hydrogen-bonded complexes

Ab initio calculations are performed at the MP2/6-311++G(d,p) and DFT/B3LYP/6-311++G(d,p) theoretical levels to obtain geometries, H-bond energies and harmonic infrared vibrational properties for the Cs symmetry structures of heterocyclic hydrogen-bonded complexes, CnHmY-HX. The H-bond lengths in DFT/B3LYP calculation level are in better agreement with the experimental values than the MP2 results. The geometry optimization are interpreted in terms of hydrogen bond nonlinearity represented by theta; and phi angles, once the hydrogen bond is formed among n-electrons pairs of the heteroatom in heterocyclic and the hydrogen atom in HX. The hydrogen bond energy after of the zero-point vibrational energy (ZPE) and basis set superposition error (BSSE) corrections are overestimated at DFT/B3LYP, whereas the MP2 BSSE corrections are very large than corresponding DFT/B3LYP. For example, the BSSE corrections for the C2H4S-HNC complex are 7.60 and 0.09 kJ mol(-1) in MP2 and DFT/B3LYP calculations levels, respectively. The new vibrational modes in infrared harmonic spectrum arising from complexation show several interesting features, especially the intermolecular stretching mode.