Degradation of poly(acrylates) under SF5+ primary ion bombardment studied using time‐of‐flight secondary ion mass spectrometry. 2. Poly(n‐alkyl methacrylates)

Polyatomic primary ions offer low penetration depth and high damage removal rates in some polymers, facilitating their use in the molecular depth profiling of these polymers by secondary ion mass spectrometry (SIMS). This study is the second in a series of systematic characterizations of the effect of polymer chemistry on degradation under polyatomic primary ion bombardment. In this study, time‐of‐flight SIMS (ToF‐SIMS) was used to measure the damage of ～90 nm thick spin‐cast poly(methyl methacrylate), poly(n‐butyl methacrylate), poly(n‐octyl methacrylate) and poly(n‐dodecyl methacrylate) films under extended (～2 × 10¹⁴ ions cm^?2) 5 keV SF₅⁺ bombardment. The degradation of the poly(n‐alkyl methacrylates) were compared to determine the effect of the length of the alkyl pendant group on their degradation under SF₅⁺ bombardment. The sputter rate and stability of the characteristic secondary ion intensities of these polymers decreased linearly with alkyl pendant group length, suggesting that lengthening the n‐alkyl pendant group resulted in increased loss of the alkyl pendant groups and intra‐ or intermolecular cross‐linking under SF₅⁺ bombardment. These results are partially at variance with the literature on the thermal degradation of these polymers, which suggested that these polymers degrade primarily via depolymerization with minimal intra‐ or intermolecular cross‐linking. Copyright © 2004 John Wiley & Sons, Ltd.     

Degradation of poly(acrylates) under SF5+ primary ion bombardment studied using time‐of‐flight secondary ion mass spectrometry. 1. Effect of main chain and pendant methyl groups

Polyatomic primary ions have been applied recently to the depth profiling of organic materials by secondary ion mass spectrometry (SIMS). Polyatomic primary ions offer low penetration depth and high damage removal rates in some polymers, but the relationship between polymer chemistry and degradation under polyatomic primary ion bombardment has not been studied systematically. In this study, positive and negative ion time‐of‐flight SIMS (ToF‐SIMS) was used to measure the damage of ～100 nm thick spin‐cast poly(methyl methacrylate) (PMMA), poly(methyl acrylate) (PMA) and poly(methacrylic acid) (PMAA), films under extended (～2 × 10¹⁴ ions cm^?2) 5 keV SF₅⁺ bombardment. These polymers were compared to determine the effect of the main chain and pendant methyl groups on their degradation under SF₅⁺ bombardment. The sputter rate of PMMA was approximately twice that of PMA or PMAA and the rate of damage accumulation was higher for PMA and PMAA than PMMA, suggesting that the main chain and pendant methyl groups played an important role in the degradation of these polymers under SF₅⁺ bombardment. These results are consistent with the literature on the thermal and radiation‐induced degradation of these polymers, which show that removal of the main chain or pendant methyl groups reduces the rate of depolymerization and increases the rate of intra‐ or intermolecular cross‐linking. Copyright © 2004 John Wiley & Sons, Ltd.     

Gas‐phase fluorine migration reactions in the radical cations of pentafluorosulfanylbenzene (Aryl―SF5) and benzenesulfonyl fluoride (Aryl―SO2F) derivatives and in the 2,5‐xylylfluoroiodonium ion

The gas‐phase reactions of Aryl―SF₅^·+ and Aryl―SO₂F^·+ have been studied with the electron ionization tandem mass spectrometry. Such reactions involve F‐atom migration from the S‐atom to the aryl group affording the product ion Aryl―F^·+ by subsequent expulsion of SF₄ or SO₂, respectively. Especially, the 4‐pentafluorosulfanylphenyl cation 4‐SF₅C₆H₄⁺ (m/z 203) from 4‐NO₂C₆H₄SF₅^·+ by loss of ·NO₂ could occur multiple F‐atom migration reactions to the product ion C₆H₄F₃⁺ (m/z 133) by loss of SF₂ in the MS/MS process. The gas‐phase reactions of 2,5‐xylylfluoroiodonium (pXyl―I⁺F, m/z 251) have also been studied using the electrospray tandem mass spectrometry, which involve a similar F‐atom migration process from the I‐atom to the aryl group giving the radical cation of 2‐fluoro‐p‐xylene (or its isomer 4‐fluoro‐m‐xylene, m/z 124) by reductive elimination of an iodine atom. All these gas‐phase F‐atom migration reactions from the heteroatom to the aryl group led to the aryl―F coupling product ions with a new formed C_Aryl―F bond. Density functional theory calculations were performed to shed light on the mechanisms of these reactions. Copyright © 2014 John Wiley & Sons, Ltd.     

Study of the end‐group contribution to ToF‐SIMS and G‐SIMS spectra of poly (lactic acid) using deuterium labelling

In this study, polymeric (MW 50 000) and oligomeric (MW 2000) poly (lactic acid) (PLA), both with and without end‐group deuterium exchange, were analysed using static secondary ion mass spectrometry (SSIMS) to investigate the contribution of end‐group‐derived secondary ions to the SSIMS spectra. By monitoring the SSIMS intensities between the non‐deuterated and deuterated PLA, it is evident that the only significant end‐group‐derived secondary ions are [nM + H]⁺ (n > 1) and C₄H₉O₂⁺. The gentle‐SIMS (G‐SIMS) methodology was employed to establish that deuterated fragments were produced through low energy processes and were not the result of substantial rearrangements. It was noted that end‐group‐derived secondary ions had higher G‐SIMS intensities for oligomeric PLA than polymeric PLA, showing that these secondary ions are simple fragment products that are not the result of rearrangement or degraded product ions. Copyright © 2007 John Wiley & Sons, Ltd.     

Investigation of ionic liquids under Bi‐ion and Bi‐cluster ions bombardment by ToF‐SIMS

A systematic study of five different imidazolium‐based room temperature ionic liquids, 1‐butyl‐3‐methylimidazolium acetate, 1‐butyl‐3‐methylimidazolium nitrate, 1‐butyl‐3‐methylimidazolium iodide, 1‐butyl‐3‐methylimidazolium hexafluorophosphate and 1‐butyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide were carried out by means of time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) in positive and negative ion mode. The compounds were measured under Bi‐ion and Bi‐cluster ions (Bi_2–7⁺, Bi_{3, 5}²⁺) bombardment, and spectral information and general rules for the fragmentation pattern are presented. Evidence for hydrogen bonding, due to high molecular secondary cluster ions, could be found. Hydrogen bonding strength could be estimated by ToF‐SIMS via correlation of the anionic yield enhancement with solvent parameters. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis and characterization of graft polymethacrylates containing conducting diphenyldithiophene for organic thin‐film transistors

A class of [5,5′]‐diphenyl‐[5,5′]‐dithiophene (PTTP)‐modified methacrylates has been synthesized and free radically polymerized to form graft polymethacrylates with the conducting PTTP segments as pendant side chains. Both the terminal alkyl side chain and spacer between the PTTP segments and polymer backbone could be varied to study fundamental structure–property relationships for this class of materials. Specifically, a group of three different PTTP graft polymethacrylates has been successfully synthesized with the alkyl side chain varying from hexyl to dodecyl. For the dodecyl‐terminated poly(4‐(5′‐(4‐dodecylphenyl)‐[2,2′‐bithiophen]‐5‐yl)phenethyl methacrylate), p(DPTTPEM), a counterpart, poly(4‐(5′‐(4‐dodecylphenyl)‐[2,2′‐bithiophen]‐5‐yl)phenbutyl methacrylate), p(DPTTPBM), where the ethyl spacer was replaced by a butyl group, was synthesized. The experimental results indicated that both the alkyl side chain and spacer significantly affected the reactivity of the PTTP‐modified methacrylates during free radical polymerization as well as the physical properties of the resultant graft polymers including solubility, morphology, and electrochemical and electrical properties. Typical field‐effect mobilities on the order of 10^?5 cm² V^?1 s^?1 were observed for all the PTTP monomers in air, which was attributed to their crystalline phase as revealed by differential scanning calorimetry and X‐ray diffraction studies. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Enhancement of the positive secondary ion yield during low‐energy,dual‐beam depth profiling of polytetrafluoroethylene with 1‐keV Cs+

This work documents the behaviour of the positive secondary ion yield of bulk polytetrafluoroethylene (PTFE) under dual‐beam depth profiling conditions employing 1 keV Ar⁺, Cs⁺ and SF₅⁺. A unique chemical interaction is observed in the form of a dramatic enhancement of the positive secondary ion yield when PTFE is dual‐beam profiled with 1 keV Cs⁺. The distinct absence of such an enhancement is noted for comparison on two non‐fluorinated polymers, polyethylene terephthalate (PET) and polydimethylsiloxane (PDMS). The bulk PTFE was probed using 15‐keV, ⁶⁹Ga⁺ primary ions in dual beam mode under static conditions; 1‐keV Ar⁺ (a non‐reactive, light, noble element), Cs⁺ (a heavier metallic ion known to form clusters) and SF₅⁺ (a polyatomic species) served as the sputter ion species. The total accumulated primary ion dose was of the order of 10¹⁵ ions/cm², which is well beyond the static limit. The enhancement of the positive secondary yield obtained when profiling with 1‐keV Cs⁺ far exceeds that obtained when SF₅⁺ is employed. An explanation of this apparent reactive ion effect in PTFE is offered in terms of polarisation of C? F bonds by Cs⁺ in the vicinity of the implantation site thereby predisposing them to facile scission. The formation of peculiar, periodic Cs_xF_y⁺ (where y = x ? 1) and Cs_xC_yF_z⁺ clusters that can extend to masses approaching 2000 amu are also observed. Such species may serve as useful fingerprints for fluorocarbons that can be initiated via pre‐dosing a sample with low‐energy Cs⁺ prior to static 15‐keV Ga⁺ analysis. Copyright © 2005 John Wiley & Sons, Ltd.     

Mesogen‐controlled ion channel of star‐shaped hard–soft block copolymers for solid‐state lithium‐ion battery

Novel star‐shaped hard–soft triblock copolymers, 4‐arm poly(styrene)‐block‐poly [poly(ethylene glycol) methyl ethyl methacrylate]‐block‐poly{x‐[(4‐cyano‐4′‐biphenyl) oxy] alkyl methacrylate} (4PS‐PPEGMA‐PMAxLC) (x = 3, 10), with different mesogen spacer length are prepared by atom‐transfer radical polymerization. The star copolymers comprised three different parts: a hard polystyrene (PS) core to ensure the good mechanical property of the solid‐state polymer, and a soft, mobile poly[poly(ethylene glycol) methyl ethyl methacrylate] (PPEGMA) middle sphere responsible for the high ionic conductivity of the solid polyelectrolytes, and a poly{x‐[(4‐cyano‐4′‐biphenyl)oxy]alkyl methacrylate} with a birefringent mesogens at the end of each arm to tuning the electrolytes morphology. The star‐shaped hard–soft block copolymers fusing hard PS core with soft PPEGMA segment can form a flexible and transparent film with dimensional stability. Thermal annealing from the liquid crystalline states allows the cyanobiphenyl mesogens to induce a good assembly of hard and soft blocks, consequently obtaining uniform nanoscale microphase separation morphology, and the longer spacer is more helpful than the shorter one. There the ionic conductivity has been improved greatly by the orderly continuous channel for efficient ion transportation, especially at the elevated temperature. The copolymer 4PS‐PPEGMA‐PMA10LC shows ionic conductivity value of 1.3 × 10^?4 S cm^?1 (25 °C) after annealed from liquid crystal state, which is higher than that of 4PS‐PPEGMA electrolyte without mesogen groups. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4341–4350     

Semi‐micro reversed‐phase liquid chromatography for the separation of alkyl benzenes and proteins exploiting methacrylate‐ and polystyrene‐based monolithic columns

Monolithic columns were synthesized inside 1.02 mm internal diameter fused‐silica lined stainless‐steel tubing. Styrene and butyl, hexyl, lauryl, and glycidyl methacrylates were the functional monomers. Ethylene glycol dimethacrylate and divinylbenzene were the crosslinkers. The glycidyl methacrylate polymer was modified with gold nanoparticles and dodecanethiol (C₁₂). The separation of alkylbenzenes was investigated by isocratic elution in 60:40 v/v acetonitrile/water. The columns based on polystyrene‐co‐divinylbenzene and poly(glycidyl methacrylate)‐co‐ethylene glycol dimethacrylate modified with dodecanethiol did not provide any separation of alkyl benzenes. The poly(hexyl methacrylate)‐co‐ethylene glycol dimethacrylate and poly(lauryl methacrylate)‐co‐ethylene glycol dimethacrylate columns separated the alkyl benzenes with plate heights between 30 and 60 μm (50 μL min^?1 and 60°C). Similar efficiency was achieved in the poly(butyl methacrylate)‐co‐ethylene glycol dimethacrylate column, but only at 10 μL min^?1 (0.22 mm s^?1). Backpressures varied from 0.38 MPa in the hexyl methacrylate to 13.4 MPa in lauryl methacrylate columns (50 μL min^?1 and 60°C). Separation of proteins was achieved in all columns with different efficiencies. At 100 μL min^?1 and 60°C, the lauryl methacrylate columns provided the best separation, but their low permeability prevented high flow rates. Flow rates up to 500 μL min^?1 were possible in the styrene, butyl and hexyl methacrylate columns.     

ToF‐SIMS analysis of a polymer microarray composed of poly(meth)acrylates with C6 derivative pendant groups

Surface analysis plays a key role in understanding the function of materials, particularly in biological environments. Time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) provides highly surface sensitive chemical information that can readily be acquired over large areas and has, thus, become an important surface analysis tool. However, the information‐rich nature of ToF‐SIMS complicates the interpretation and comparison of spectra, particularly in cases where multicomponent samples are being assessed. In this study, a method is presented to assess the chemical variance across 16 poly(meth)acrylates. Materials are selected to contain C₆ pendant groups, and ten replicates of each are printed as a polymer microarray. SIMS spectra are acquired for each material with the most intense and unique ions assessed for each material to identify the predominant and distinctive fragmentation pathways within the materials studied. Differentiating acrylate/methacrylate pairs is readily achieved using secondary ions derived from both the polymer backbone and pendant groups. Principal component analysis (PCA) is performed on the SIMS spectra of the 16 polymers, whereby the resulting principal components are able to distinguish phenyl from benzyl groups, mono‐functional from multi‐functional monomers and acrylates from methacrylates. The principal components are applied to copolymer series to assess the predictive capabilities of the PCA. Beyond being able to predict the copolymer ratio, in some cases, the SIMS analysis is able to provide insight into the molecular sequence of a copolymer. The insight gained in this study will be beneficial for developing structure–function relationships based upon ToF‐SIMS data of polymer libraries. © 2016 The Authors Surface and Interface Analysis Published by John Wiley & Sons Ltd.     

Amphiphilic star‐block copolymers based on a hyperbranched core: Synthesis and supramolecular self‐assembly

Novel amphiphilic star‐block copolymers, star poly(caprolactone)‐block‐poly[(2‐dimethylamino)ethyl methacrylate] and poly(caprolactone)‐block‐poly(methacrylic acid), with hyperbranched poly(2‐hydroxyethyl methacrylate) (PHEMA–OH) as a core moiety were synthesized and characterized. The star‐block copolymers were prepared by a combination of ring‐opening polymerization and atom transfer radical polymerization (ATRP). First, hyperbranched PHEMA–OH with 18 hydroxyl end groups on average was used as an initiator for the ring‐opening polymerization of ε‐caprolactone to produce PHEMA–PCL star homopolymers [PHEMA = poly(2‐hydroxyethyl methacrylate); PCL = poly(caprolactone)]. Next, the hydroxyl end groups of PHEMA–PCL were converted to 2‐bromoesters, and this gave rise to macroinitiator PHEMA–PCL–Br for ATRP. Then, 2‐dimethylaminoethyl methacrylate or tert‐butyl methacrylate was polymerized from the macroinitiators, and this afforded the star‐block copolymers PHEMA–PCL–PDMA [PDMA = poly(2‐dimethylaminoethyl methacrylate)] and PHEMA–PCL–PtBMA [PtBMA = poly(tert‐butyl methacrylate)]. Characterization by gel permeation chromatography and nuclear magnetic resonance confirmed the expected molecular structure. The hydrolysis of tert‐butyl ester groups of the poly(tert‐butyl methacrylate) blocks gave the star‐block copolymer PHEMA–PCL–PMAA [PMAA = poly(methacrylic acid)]. These amphiphilic star‐block copolymers could self‐assemble into spherical micelles, as characterized by dynamic light scattering and transmission electron microscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6534–6544, 2005     

Hydrogen bonding and hydrophobic interactions between [60]fullerenated poly(2‐hydroxyethyl methacrylate) and poly(1‐vinylimidazole) or poly(4‐vinylpyridine)

Miscible blends of poly(2‐hydroxyethyl methacrylate) (PHEMA) and poly(1‐vinylimidazole) (PVI) have been formed in methanol/water (3/2 v/v) solutions. The incorporation of 0.6 wt % C₆₀ into PHEMA leads to hydrophobic interactions and enhanced hydrogen bonding in miscible blends of [60]fullerenated poly(2‐hydroxyethyl methacrylate) (FPHEMA) with PVI. The incorporation of 2.6 wt % C₆₀ into PHEMA increases its tendency to form interpolymer complexes with PVI. Interpolymer complexes are formed when FPHEMA samples containing 0.6, 1.4, and 2.6 wt % C₆₀ are blended with poly(4‐vinylpyridine). The yields of the complexes increase with increasing C₆₀ content in FPHEMA. Calorimetry and Fourier transform infrared spectroscopy studies suggest the importance of hydrophobic interactions in C₆₀‐containing blends and complexes. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4316–4327, 2002     

Photodegradation of poly(ether sulphone) Part 1. A time‐of‐flight secondary ion mass spectrometry study

An extensive study of the surface chemical changes to poly(ether sulphone) (PES) ultrafiltration membranes is made for the first time by the use of time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) after photoirradiation at 254 nm with irradiances varying from 10 to 300 mJ cm^?2 in a nitrogen atmosphere. Complementary information is provided by analysis with x‐ray photoelectron spectroscopy (XPS) and attenuated total reflectance Fourier transform infrared spectroscopy (ATR‐FTIR). The versatility, superior specificity and sensitivity of using ToF‐SIMS to investigate degradation phenomena are highlighted. The combined results demonstrate that photoirradiation causes a number of chemical changes to the surface: incorporation of oxygen; degradation of the benzene rings and formation of oxidized carbon species; depletion of carbon; reduction of ? SO₂? to some extent; formation of ? OH, C?O and ? SO₃H groups; and probable formation of ? C₆H₄? O? C₆H₅ end‐groups. In addition, no ? OSO₃H groups are formed and no formation of SO₂ is detected. Also, it is shown that chain scission dominates below an irradiation dose of ～200 mJ cm^?2 (at 254 nm in a nitrogen atmosphere). At higher doses, cross‐linking becomes dominant. Copyright © 2004 John Wiley & Sons, Ltd.     

Subnanometre depth resolution in sputter depth profiling of Si layers using grazing‐incident low‐energy O2+ and Ar+ ions

The sputter damage profiles of Si(100) by low‐energy O₂⁺ and Ar⁺ ion bombardment at various angles of incidence were measured using medium‐energy ion scattering spectroscopy. It was observed that the damaged Si surface layer can be minimized down to 0.5–0.6 nm with grazing‐incident 500 eV Ar⁺ and O₂⁺ ions at 80°. To illustrate how the damaged layer thickness can be decreased down to 0.5 nm, molecular dynamics simulations were used. The SIMS depth resolution estimated with trailing‐edge decay length for a Ga delta‐layer in Si with grazing‐incident 650 eV O₂⁺ was 0.9 nm, which is in good agreement with the measured damaged layer thickness. Copyright © 2004 John Wiley & Sons, Ltd.     

Controlled radical polymerization of 2‐hydroxyethyl methacrylate initiated by photofunctional 2‐(N,N‐diethyldithiocarbamyl)isobutyric acid

We demonstrated that density functional theory calculations provide a reliable and quantitative prediction of the trends in C? S bond dissociation energies using several model compounds as photoinitiator. On the basis of this information, we designed a possible photofunctional initiator for the polymerization of hydrophilic vinyl monomers. Photopolymerization of 2‐hydroxyethyl methacrylate (HEMA) hydrophilic monomer was carried out in ethanol initiated by 2‐(N,N‐diethyldithiocarbamyl)isobutyric acid (DTCA) under UV irradiation. We performed the first‐order time‐conversion plots in this polymerization system, and the straight line in the semilogarithmic coordinates indicated first order in monomer. The molecular weight of the poly(2‐hydroxyethyl methacrylate) (PHEMA) increased with increasing conversion. The molecular weight distribution (M_w/M_n) of the PHEMA was about 1.5. Methyl methacrylate (MMA) could also be polymerized in a living fashion with such a PHEMA precursor as a macroinitiator because PHEMA exhibited a dithiocarbamate (DC) group at its terminal end. This system could be applied to the architecture of amphiphilic block copolymers. It was concluded that these polymerization systems proceeded with controlled radical mechanism. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 76–82, 2004     

Degradation of poly(butyl methacrylate) model compounds studied via high‐resolution electrospray ionization mass spectrometry

This study investigates the degradation behavior of poly(n‐butyl methacrylate) ( p(nBMA) ), poly(tert‐butyl methacrylate) ( p(tBMA) ), and poly(hexafluoro butyl methacrylate) ( p(HFBMA) ) on a molecular level under extreme environmental conditions. The polymers chosen are readily applicable in the formulation of surface coatings and were degraded under conditions which replicated the harsh Australian climate, in which surface coatings may reach temperatures of up to 95 °C and are exposed to broad‐spectrum UV radiation of up to 1 kW m^?2. The degradation profiles were mapped with high‐resolution electrospray ionization mass spectrometry (ESI‐MS) with a LCQ quadrupole ion trap mass analyzer, with the peak assignments confirmed to within 3 ppm using ESI‐MS with a LTQ‐Orbitrap mass detector. It was found that in all the butyl ester polymers analyzed herein—regardless of their tertiary side‐chain structure—the loss of the butyl ester group and subsequent formation of acid side groups are a component of the overall degradation pathway of poly(butyl methacrylate)s under these harsh conditions. However, it is also demonstrated that the magnitude of this pathway is intimately linked to the side‐chain structure with the propensity for degradation decreasing in the order p(tBMA) > p(nBMA) > p(HFBMA) . The degradation mechanisms identified in this study, in combination with the previous end‐group degradation studies of poly(methyl methacrylate) and poly(n‐butyl acrylate), have allowed a much deeper understanding of the molecular degradation behavior of poly(acrylate)s and poly(methacrylate)s in an extreme natural environment. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Chemical discrimination of multilayered paint cross sections for potential forensic applications using time‐of‐flight secondary ion mass spectrometry

Time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) equipped with a bismuth imaging source and an argon gas cluster ion beam (GCIB) was used to image polished cross‐sections of four automotive multilayer paint samples. Secondary ion mass spectrometry chemical imaging of the individual layers was possible after a GCIB sputter ion dose of (7 × 10¹⁵) ions/cm² was applied for the removal of polishing residue, at which point the chemical composition of the individual clear coats could be distinguished using principal components analysis. For the differentiation of the four clear coat chemistries, only four secondary ion peaks were necessary; C₂H₅O⁺ (m/z 45.04), C₉H₉NO₂⁺ (m/z 163.09), and C₁₀H₁₁NO₂⁺ (m/z 177.10) that appeared to be fragments of the carbamate‐based clear coat, and C₇H₁₁⁺ (m/z 95.09) that was strongly associated with the polyurethane‐based clear coat. Clear identification of the four paint samples based on this short peak list highlights the strength of the SIMS technique as a potential forensic approach to discriminate automotive paints and suggests that many more variables could be included in the multivariate and statistical analysis to differentiate a wider range of clear coat chemistries.     

Organic secondary ion mass spectrometry: Signal enhancement by water vapor injection

The enhancement of the static secondary ion mass spectrometry (SIMS) signals resulting from the injection, closely to the sample surface, of H₂O vapor at relatively high-pressure, was investigated for a set of organic materials. While the ion signals are generally improved with increasing H₂O pressure upon 12 keV Ga⁺ bombardment, a specific enhancement of the protonated ion intensity is clearly demonstrated in each case. For instance, the presence of H₂O vapor induces an enhancement by one order of magnitude of the [M+ H]⁺ static SIMS intensity for the antioxidant Irgafos 168 and a ∼1.5-fold increase for polymers such as poly(vinyl pyrrolidone).     

Polymer electrolyte membranes by in situ polymerization of poly(ethylene carbonate‐co‐ethylene oxide) macromonomers in blends with poly(vinylidene fluoride‐co‐hexafluoropropylene)

Salt‐containing membranes based on polymethacrylates having poly(ethylene carbonate‐co‐ethylene oxide) side chains, as well as their blends with poly(vinylidene fluoride‐co‐hexafluoropropylene) (PVDF‐HFP), have been studied. Self‐supportive ion conductive membranes were prepared by casting films of methacrylate functional poly(ethylene carbonate‐co‐ethylene oxide) macromonomers containing lithium bis(trifluorosulfonyl)imide (LiTFSI) salt, followed by irradiation with UV‐light to polymerize the methacrylate units in situ. Homogenous electrolyte membranes based on the polymerized macromonomers showed a conductivity of 6.3 × 10^?6 S cm^?1 at 20 °C. The preparation of polymer blends, by the addition of PVDF‐HFP to the electrolytes, was found to greatly improve the mechanical properties. However, the addition led to an increase of the glass transition temperature (T_g) of the ion conductive phase by ～5 °C. The conductivity of the blend membranes was thus lower in relation to the corresponding homogeneous polymer electrolytes, and 2.5 × 10^?6 S cm^?1 was recorded for a membrane containing 10 wt % PVDF‐HFP at 20 °C. Increasing the salt concentration in the blend membranes was found to increase the T_g of the ion conductive component and decrease the propensity for the crystallization of the PVDF‐HFP component. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 79–90, 2007