Perovskite-like La1−xKxMnO3 and related compounds: Solid state chemistry and the catalysis of the reduction of NO by CO and H2

The new compounds La_1?xM_xMnO₃ (0.05 ? x ? 0.4 for M = K; x = 0.2 for M = Na, Rb) have been prepared. La_1?xK_xMnO₃ (0.05 ? x ? 0.4), LaMnO_3.01, LaMnO_3.15, La_0.8Na_0.2MnO₃, and La_0.8Rb_0.2MnO₃ have been used as catalysts in the reduction of NO. La_0.8K_0.2MnO₃ has also been used in the catalytic decomposition of NO. The activity of these catalysts is related to the presence of a Mn³⁺/Mn⁴⁺ mixed valence and to the relative ease of forming oxygen vacancies in the solid. The presence of cation vacancies in LaMnO_3.15 and the substitution of La³⁺ by alkali ions in LaMnO₃ increases the catalytic activity. The reduction of NO involves both molecular and dissociative adsorption of NO.     

还原剂对La0.7Sr0.3Co0.8Fe0.2O3钙钛矿催化剂NOx储存性能的影响

采用溶胶-凝胶法制备了La0.7Sr0.3Co0.8Fe0.2O3钙钛矿催化剂,考察了还原剂种类(CO,C3H6,H2)对催化剂在氮氧化物储存还原(NSR)循环前后的氮氧化物储存量(NSC)和NO-to-NO2转化率的影响.O2程序升温脱附(O2-TPD)实验结果表明,CO还原后的钙钛矿催化剂上形成了较多的氧空位,而氧空位则是一种有效的NOx储存活性中心.活性测试和傅里叶红外变换(FTIR)光谱表征结果显示:在NSR循环中,以CO为还原剂时催化剂显示了最佳的氮氧化物(NOx)储存效果.进一步的研究结果显示,当采用CO作为还原剂时,经过三次NSR循环后,催化剂中出现了Sr3Fe2O7新物相,而该物相可能具有比La0.7Sr0.3Co0.8Fe0.2O3钙钛矿更佳的NOx储存性能.综上所述,CO作为还原剂时可能使钙钛矿催化剂产生更多的氧空位以及更易于储存NOx的Sr3Fe2O7物相,这些原因使其NOx储存性能得到了大幅度改善.     

Reverse micellar synthesis and properties of nanocrystalline GMR materials (LaMnO3, La0.67Sr0.33MnO3 and La0.67Ca0.33MnO3): Ramifications of size considerations

Nanoparticles of complex manganites (viz. LaMnO₃, La_0.67Sr_0.33MnO₃ and La_0.67Ca{0.33}MnO₃) have been synthesized using the reverse micellar route. These manganites are prepared at 800‡C and the monophasic nature of all the oxides has been established by powder X-ray diffraction studies. TEM studies show an average grain size of 68, 80 and 50 nm for LaMnO₃, La_0.67Sr_0.33MnO₃ and La_0.67Ca{0.33}MnO₃respectively. Ferromagnetic ordering is observed at around 250 K for LaMnO₃, 350 K for La_0.67Sr_0.33MnO₃ and 200 K for La_0.67Ca{0.33}MnO₃. These Curie temperatures correspond well with those reported for bulk materials with similar composition.     

固-溶法制备中温固体氧化物燃料电池高性能La0.8Sr0.2MnO3-Ba0.5Sr0.5Co0.8Fe0.2O3阴极

研究了新型固溶法合成La_0.8Sr_0.2MnO₃（LSM）包覆Ba_0.5Sr_0.5Co_0.8Fe_0.2O₃（BSCF）复合粉体（LSM-BSCF）,并探讨了其作为中温固体氧化物燃料电池阴极材料的电化学性能。LSM-BSCF阴极结合了LSM和BSCF阴极的优点,不仅增大了三相界面,而且稳定了微观结构。当温度为600-750℃时,其极化阻抗为0.61-0.09 Ω·cm²。与溶液注入法制备的高性能电极相比,极大地提高了性能稳定性。     

La0.6Sr1.4MnO4 layered perovskite anode material for intermediate temperature solid oxide fuel cells

La_0.6Sr_1.4MnO₄ (LSMO₄) layered perovskite with K₂NiF₄ structure was prepared and evaluated as anode material for La_0.8Sr_0.2Ga_0.83Mg_0.17O_3 − δ (LSGM) electrolyte supported intermediate temperature solid oxide fuel cells (IT-SOFCs). X-ray diffraction results show that LSMO₄ is redox stability. Thermal expansion coefficient of LSMO₄ is close to that of LSGM electrolyte. By adopting LSMO₄ as anode and La_0.6Sr_0.4Co_0.8Fe_0.2O₃ (LSCF) as cathode, maxium power densities of 146.6, 110.9 mW cm^− 2 with H₂ fuel at 850, 800 °C and 47.3 mW cm^− 2 with CH₄ fuel at 800 °C were obtained, respectively. Further, the cell demonstrated a reasonably stable performance under 180 mA cm^− 2 for over 40 h with H₂ fuel at 800 °C.     

The reduction of alkali substituted LaMnO3

In order to determine the stability of some potential NO_x reduction catalysts (La_0.8M_0.2MnO₃, M  Na, K, Rb) the accelerated reduction of these catalysts in H₂, N₂ atmospheres was studied. La_0.8K_0.2MnO₃ goes through a reversible oxygen loss at about 350°C corresponding to the reduction of the available Mn⁴⁺ to Mn³⁺ in H₂, N₂ atmospheres. By reduction at higher temperatures a previously unreported phase La₂MnO₄ is formed. The most reducing conditions (10% H₂ in N₂, >940°C) formed only La₂O₃ and MnO. Between 700 and 880°C in 10% H₂ in N₂ potassium was eliminated from the sample by reduction to the metal and evaporation. Analogous results were found for Na and Rb substituted LaMnO₃ except that the intermediate phase La₂MnO₄ was not observed in the reduction of La_0.8Rb_0.2MnO₃.     

Conversion of NO in NO/N2, NO/O2/N2, NO/C2H4/N2 and NO/C2H4/O2/N2 Systems by Dielectric Barrier Discharge Plasmas

An experimental study on the conversion of NO in the NO/N₂, NO/O₂/N₂, NO/C₂H₄/N₂ and NO/C₂H₄/O₂/N₂ systems has been carried out using dielectric barrier discharge (DBD) plasmas at atmospheric pressure. In the NO/N₂ system, NO decomposition to N₂ and O₂ is the dominating reaction; NO conversion to NO₂ is less significant. O₂ produced from NO decomposition was detected by an on-line mass spectrometer. With the increase of NO initial concentration, the concentration of O₂ produced decreases at 298 K, but slightly increases at 523 K. In the NO/O₂/N₂ system, NO is mainly oxidized to NO₂, but NO conversion becomes very low at 523 K and over 1.6% of O₂. In the NO/C₂H₄/N₂ system, NO is reduced to N₂ with about the same NO conversion as that in the NO/N₂ system but without NO₂ formation. In the NO/C₂H₄/O₂/N₂ system, the oxidation of NO to NO₂ is dramatically promoted. At 523 K, with the increase of the energy density, NO conversion increases rapidly first, and then almost stabilizes at 93–91% of NO conversion with 61–55% of NO₂ selectivity in the energy density range of 317–550 J L⁻¹. It finally decreases gradually at high energy density. A negligible amount of N₂O is formed in the above four systems. Of the four systems studied, NO conversion and NO₂ selectivity of the NO/C₂H₄/O₂/N₂ system are the highest, and NO/O₂/C₂H₄/N₂ system has the lowest electrical energy consumption per NO molecule converted.     

The Reactivity of Manganites in 18O Isotope Exchange Reactions

The effect of the structural properties and the oxidation state of Mn on the ¹⁸O isotope exchange behaviour of ternary manganites (La_1–xSr_xMnO₃, La_0.5Sr_1.5MnO₄ and SrMnO₃) has been studied. All types of ¹⁸O isotope exchange homomolecular, partially and completely heteromolecular) take place on the very active manganites with perovskite (LaMnO₃ and La_0.7Sr_0.3MnO₃) and perovskite-like (SrMnO₃) structure, but not on the less active K₂NiF₄-structure (La_0.5Sr_1.5MnO₄). The highest ¹⁸O exchange activity is observed for La_0.7Sr_0.3MnO₃, for which the completely heteromolecular ¹⁸O exchange starts to occur at 520 K, already, a T_on which is typical for excellent redox catalysts. The influence of the structural properties on the ¹⁸O exchange and oxygen diffusion behaviour of the manganites is much more pronounced than that of the Mn³⁺/Mn⁴⁺ ratio. The different reduction behaviour of the manganites with perovskite and K₂NiF₄-structure can be explained by means of the bond-valence model.This revised version was published online in November 2005 with corrections to the Cover Date.     

Effect of stoichiometric ratio of organic fuel to oxidizer on performance of La0.8Sr0.2CoO3 catalysts for CH4 combustion

Perovskite-type La_0.8Sr_0.2CoO₃ mixed oxides were prepared by d,l-alanine solution combustion synthesis and used successfully in CH₄ combustion as catalysts. These samples were characterized by means of XRD, FTIR, BET, and H₂-TPR methods. The effects of stoichiometric ratio (φ) of organic fuel to oxidizer on the structure and catalytic activities of the catalysts were studied. The results indicate that all La_0.8Sr_0.2CoO₃ mixed oxides with different φ have perovskite structures. Their structures and catalytic activities vary along with the change of φ. The catalytic activity of La_0.8Sr_0.2CoO₃ mixed oxide with φ = 1.52 is the best among all the samples, whose T ₅₀ and T ₁₀₀ (the temperatures of methane conversions reaching 50 and 100%, respectively) are respectively 470 °C and 550 °C, which can be explained in terms of the smaller of average crystal size, higher specific surface area, bigger lattice distortion, lower activation energy, and higher mobility of chemically adsorbed oxygen on the surface and vacancy of the catalysts.     

La0.8Sr0.2Fe1-xScxO3-δ催化剂的制备、表征及甲烷催化燃烧性能

采用甘氨酸-硝酸盐溶液燃烧法制备了钙钛矿型氧化物催化剂La_0.8Sr_0.2Fe_1-xSc_xO_3-δ (LSFS, x=0, 0.3,0.4, 0.5, 0.6, 0.8, 1), 利用X射线衍射(XRD)、H₂程序升温还原(H₂-TPR)、扫描电子显微镜(SEM)和比表面积测试等手段对催化剂进行了系统表征, 并在常压微型固定床反应器上考察了催化剂对甲烷燃烧的催化性能. 结果表明, 经空气气氛下900 °C煅烧5 h制备的LSFS均具有单一的钙钛矿结构, 在La_0.8Sr_0.2FeO_3-δ (LSF)中掺杂Sc有助于改善催化剂的抗烧结性能, 提高催化剂的比表面积. 当LSF 中的Sc 掺杂量为0.4-0.6 时, 所形成的LSFS表现出良好的甲烷催化燃烧活性, 其中Sc 掺杂量为0.5 时, 其起燃温度(T₁₀)和完全转化温度(T₉₀)分别为406和563 °C, 与La_0.8Sr_0.2FeO_3-δ和La_0.8Sr_0.2ScO_3-δ相比, T₁₀分别降低了14和87 °C; T₉₀分别降低了59和95 °C.     

Hetero- and homo-nuclear bimetallic ruthenol complexes by dehydrogenative metallacyclization of Ru(CO)3(bi-1,7-cyclooctadienyl), preparation and x-ray structure of Fe(CO)3(C16H22), RuFe(CO)6(C16H22) and Ru2(CO)6(C16H20)

The reaction of M₃(CO)₁₂ (M = Ru, Fe) with excess bi-2,7-cyclooctadienyl (C₁₆H₂₂) 1 gave a mononuclear complex M(CO)₃(1,2,1′-2′-η⁴-C₁₆H₂₂), 2a (M = Ru) or 3a (M = Fe), in good yield. Treatment of 2a with Fe₃(CO)₁₂ or reaction of 3a with Ru₃(CO)₁₂ gave the heterobimetallic complex RuFe(CO)₆(C₁₀H₂₂) consisting of a ruthenacyclopentadiene unit coordinated to an Fe(CO)₃ fragment, as confirmed by ¹H NMR and X-ray studies. The corresponding homobimetallic complex Ru₂(CO)₆(C₁₆H₂₂) was obtained from the 1:1 reaction of 2a with Ru₃(CO)₁₂, while the direct reaction of 1 with Ru₃(CO)₁₂ gave Ru₂(CO)₆(C₁₆H₂₀) preferentially with a loss of two hydrogen atoms. The pathway for formation of these bimetallic complexes was interpreted as a dehydrogenative metallacyclization followed by hydrogen transfer.     

TiO2晶相对MnOx/TiO2催化剂催化NO氧化性能的影响

以浸渍在不同晶相TiO₂ （金红石型（R）、锐钛矿型（A）和P25型（P））上的锰基催化剂为对象,研究了TiO₂晶相对MnO_x/TiO₂催化剂催化NO氧化活性的影响。 结果表明,MnO_x/TiO₂（P）催化剂活性最高,NO转化率在300℃及GHSV = 20000 h^-1条件下可达83%。 各催化剂活性顺序为MnO_x/TiO₂（P）>MnO_x/TiO₂（A）>MnO_x/TiO₂（R）。采用X射线粉末衍射、场发射扫描电子显微镜、X射线光电子能谱、H₂程序升温还原和O₂程序升温脱附等手段研究了TiO₂晶相影响MnO_x/TiO₂催化剂催化活性的作用机理。结果表明,相比于A和R型TiO₂,P型TiO₂能够增加MnO_x在其表面的分散度并抑制催化剂颗粒的团聚和粘连,且更有利于Mn₂O₃的生成,而后者催化NO氧化活性比其它MnO_x更高;此外,P型TiO₂可以增加MnO_x尤其是Mn₂O₃的还原性,并可促进O₂^-从M³⁺-O键的脱附。     

钙铝石涂层对整体型钙钛矿氧化物催化剂活性和热稳定性的影响

 采用固相反应法合成了钙铝石材料 12SrO•7Al2O3, 并以此作为涂层制备了堇青石蜂窝陶瓷型 La0.8Sr0.2MnO3 整体催化剂, 在不同温度 (850~1 050 oC) 下对该催化剂进行了热处理, 并采用 N2 吸附-脱附、X 射线衍射和扫描电镜等手段对其进行了表征, 考察了其催化甲基丙烯酸甲酯燃烧反应的活性. 结果表明, 12SrO•7Al2O3 作为涂层明显改善了整体催化剂的热稳定性, 在 850 oC 下焙烧 6 h 后, 含有 12SrO•7Al2O3 涂层的整体催化剂在 260 oC 即可将甲基丙烯酸甲酯完全转化. 12SrO•7Al2O3 涂层可避免 La0.8Sr0.2MnO3 活性组分与堇青石的接触, 减轻了活性组分在催化剂表面的烧结, 有利于保持 La0.8Sr0.2MnO3 活性组分的晶体结构和分散度, 提高整体催化剂的活性和热稳定性.     

Reactions of C2(a 3πu) with CH4, C2H2, C2H4, C2H6, and O2 using multiphoton UV excimer laser photolysis

C₂(a ³π_u) disappearance rate constants of 1.44, 0.96, 0.0296, 0.0130 and < 10^?6(x10^?10cm³s^?1) are reported for reactions with C₂H₄, C₂H₂, O₂, C₂H₆, and CH₄, respectively at 298 K. C₂(a ³π_u) fragments are generated by multiphoton ArF excimer laser photodissociation at C₂H₂, and monitored by dye laser induced fluorescence. Arguments are presented which favor chemical reactions over the C₂(a ³π_u) → (X ¹σ⁺_g) quenching channel. C₂ + C₂H₂ represents the one possible exception to the reactive channel.     

PREPARATION AND CATALYTIC PERFORMANCE OF La0.5RE0.1Sr0.4MnO3 (RE: Y, Dy, Sm OR Ce) ULTRA-FINE PARTICLES in METHANE COMBUSTION

Ultra-fine particles of La_0.5RE_0.1Sr_0.4MnO₃ (RE: Y, Dy, Sm or Ce) with perovskite structure were prepared by the co-precipitation method, resulting in high surface area and good thermal stability catalysts (S_BET reached 45 and 16.5 m²/g, upon calcination at 700 and 1000^oC, respectively). The thermal stability of these ultra-fine particles was effectively improved with partial substitution of RE³⁺ (Y³⁺, Dy³⁺, or Sm³⁺) for La³⁺ in La_0.6Sr_0.4MnO₃. The catalysts exhibited high activity for the total combustion of methane. For the catalysts calcined at 1000^oC, La_0.5RE_0.1Sr_0.4MnO₃ (RE: Y or Dy) were much more active and showed much higher specific surface area than La_0.6Sr_0.4MnO₃.     

Multiphoton ionization detection of photodissociation fragments: NO from CH3ONO,C2H5ONO,and C3H7ONO

The single photon photodissociation of CH₃ONO, C₂H₅ONO, and C₃H₇ONO has been studied under collision- free conditions using multiphoton ionization to detect the NO fragment. NO rotational excitation from CH₃ONO was very large (E_rot > 2100 cm^?1) and non-thermal, while C₂H₅ONO and C₃H₇ONO produced NO which could be characterized by T_rot = 350 and 250 K respectively.     

Nano-sized La0.8Sr0.2MnO3 as oxygen reduction catalyst in nonaqueous Li/O2 batteries

Nano-sized La_0.8Sr_0.2MnO₃ prepared by the polyethylene glycol assisting sol–gel method was applied as oxygen reduction catalyst in nonaqueous Li/O₂ batteries. The as-synthesized La_0.8Sr_0.2MnO₃ was characterized by X-ray diffraction (XRD), scanning electron microscopy, and Brunauer–Emmet–Teller measurements. The XRD results indicate that the sample possesses a pure perovskite-type crystal structure, even sintered at a temperature as low as 600 °C, whereas for solid-state reaction method it can only be synthesized above 1,200 °C. The as-prepared nano-sized La_0.8Sr_0.2MnO₃ has a specific surface area of 32 m² g⁻¹, which is much larger than the solid-state one (1 m² g⁻¹), and smaller particle size of about 100 nm. Electrochemical results show that the nano-sized La_0.8Sr_0.2MnO₃ has better catalytic activity for oxygen reduction, higher discharge plateau and specific capacity.     

富氧条件下Co/ZSM-5催化剂对C_3H_8选择还原NO_x的性能

采用多种物理化学手段研究了在模拟的轻型柴油车尾气中不同Co担载量及Cu掺杂的Co/ZSM-5催化剂的Co组分分散状态、可还原性、NO吸附脱附性质对C3H8选择性催化还原NOx性能的影响。结果表明,浸渍法制备的Co/ZSM-5催化剂上既有外表面上的Co3+和Co2+物种,也有孔内的Co2+离子。富氧条件下Co/ZSM-5催化剂上C3H8选择性催化还原NOx的活性主要与ZSM-5载体孔外表面分散的CoOx物种中的钴离子可还原能力和NO吸附脱附性能密切相关。Co/ZSM-5催化剂上适宜的Co担载量约为4.0wt%,低担载量时随Co担载量增加,表面CoOx物种中钴离子可还原能力增强,C3H8选择性催化还原NOx的低温转化活性增加;高担载量时,随Co担载量增加,单位Co离子的NO吸附量的减少以及催化剂表面活性中心数的减少,导致了Co/ZSM-5催化剂NOx的转化率和催化剂比速率(k)的下降。孔外表面Co3O4晶体的存在使催化剂表面产生较强的NO吸附,并在高温时有利于C3H8的氧化燃烧,使C3H8选择性催化还原NOx的活性降低。     

Synthesis and crystal structure of Ir(C2H4)2(C5H7O2)

We report a new synthesis and characterization of Ir(C₂H₄)₂(C₅H₇O₂) [(acetylacetonato)-bis(η²-ethene)iridium(I)], prepared from (NH₄)₃IrCl₆ · H₂O in a yield of about 45%. The compound has been characterized by X-ray diffraction crystallography, infrared, Raman, and NMR spectroscopies and calculations at the level of density functional theory. Ir(C₂H₄)₂(C₅H₇O₂) is isostructural with Rh(C₂H₄)₂(C₅H₇O₂), but there is a substantial difference in the ethylene binding energies, with Ir-ethylene having a stronger interaction than Rh-ethylene; two ethylenes are bound to Ir with a binding energy of 94 kcal/mol and to Rh with a binding energy of 70 kcal/mol.     

Synthesis and reactivity of [N(C6H4Br)3][B(C6F5)4]: the X-ray crystal structure of [Fe(C5H5)2][B(C6F5)4]

A new chemical oxidant [N(4-C₆H₄Br)₃][B(C₆F₅)₄], was prepared and used to synthesize [Fe(C₅H₅)₂][B(C₆F₅)₄]. The crystal structure of [Fe(C₅H₅)₂][B(C₆F₅)₄] was determined.