The doubly thermo-responsive triblock copolymer nanoparticles prepared through seeded RAFT polymerization

The doubly thermo-responsive triblock copolymer nanoparticles of polystyrene-block-poly(N-isopropylacrylamide)-block-poly[N,N-(dimethylamino) ethyl methacrylate] (PS-b-PNIPAM-b-PDMAEMA) are successfully prepared through the seeded RAFT polymerization in situ by using the PS-b-PNIPAM-TTC diblock copolymer nanoparticles as the seed. The seeded RAFT polymerization undergoes a pseudo-first-order kinetics procedure, and the molecular weight increases with the monomer conversion linearly. The hydrodynamic diameter (D _h) of the triblock copolymer nanoparticles increases with the extension of the PDMAEMA block. In addition, the double thermo-response behavior of the PS-b-PNIPAM-b-PDMAEMA nanoparticles is detected by turbidity analysis, temperature-dependent 1H-NMR analysis, and DLS analysis. The seeded RAFT polymerization is believed as a valid method to prepare triblock copolymer nanoparticles containing two thermo-responsive blocks.     

Preparation of pH- and reductive-responsive prodrug nanoparticles via polymerization-induced self-assembly

pH- and reductive-responsive prodrug nanoparticles are constructed via a highly efficient strategy, polymerization-induced selfassembly (PISA). First, reversible addition-fragmentation chain transfer (RAFT) polymerization of 2-(diisopropylamino) ethyl methacrylate (DIPEMA) and camptothecin prodrug monomer (CPTM) using biocompatible poly(N-(2-hydroxypropyl) methacrylamide) (PHPMA-CPDB) as the macro RAFT agent is carried out, forming prodrug diblock copolymer PHPMA-P (DIPEMA-co-CPTM). Then, simultaneous fulfillment of polymerization, self-assembly, and drug encapsulation are achieved via RAFT dispersion polymerization of benzyl methacrylate (BzMA) using the PHPMA-P(DIPEMA-co-CPTM) as the macro RAFT agent. The prodrug nanoparticles have three layers, the biocompatible shell (PHPMA), the drug-conjugated middle layer (P(DIPEMA-co-CPTM)) and the PBzMA core, and relatively high concentration (250 mg/g). The prodrug nanoparticles can respond to two stimuli (reductive and acidic conditions). Due to reductive microenvironment of cytosol, the cleavage of the conjugated camptothecin (CPT) within the prodrug nanoparticles could be effectively triggered. pH-Induced hydrophobic/ hydrophilic transition of the PDIPEMA chains results in faster diffusion of GSH into the CPTM units, thus accelerated release of CPT is observed in mild acidic and reductive conditions. Cell viability assays show that the prodrug nanoparticles exhibit well performance of intracellular drug delivery and good anticancer activity.     

RAFT polymerization of linear ABC triblock copolymer P<Emphasis Type="Italic">t</Emphasis>BA-<Emphasis Type="Italic">b</Emphasis>-PS-<Emphasis Type="Italic">b</Emphasis>-P2VP and regulation of its hierarchical self-assembly structure in solution

Linear ABC triblock copolymer PtBA₁₅₄-b-PS₃₀₀-b-P2VP₂₄₀ was successfully synthesized by RAFT polymerization. Block copolymer micelles were prepared by the two-step hierarchical self-assembly process. Size exclusion chromatography and ¹H NMR were used to characterize the structure of samples. Morphologies and size of micelles were determined by transmission electron microscope. The results showed that the densely dispersed spherical micelles of PtBA₁₅₄-b-PS₃₀₀-b-P2VP₂₄₀ were obtained in the first step of the hierarchical self-assembly process. In the second step, core-compartmentalized micelle strings with different lengths and distribution densities were obtained when the primary self-assembled solution was dialyzed in distilled water with pH ≈ 3. When distilled water with pH ≈ 3 was added drop-wise to this solution, uniformly dispersed spherical core-compartmentalized micelles of PtBA₁₅₄-b-PS₃₀₀-b-P2VP₂₄₀ were prepared. Thus, hierarchical self-assembly structure of linear ABC triblock copolymer was obtained successfully and the preparation of uniformly dispersed spherical micelles of triblock copolymers was realized simply by changing the secondary self-assembly methods.     

Synthesis of isotactic polystyrene-block-polyethylene by the combination of sequential monomer addition and hydrogenation of 1,4-<Emphasis Type="Italic">trans</Emphasis>-polybutadiene block

Herein, we demonstrate the synthesis of a well-defined diblock copolymer consisting of isotactic polystyrene (iPS) and linear polyethylene, isotactic polystyrene-block-polyethylene (iPS-b-PE), by the combination of sequential monomer addition and hydrogenation. Isospecific living polymerization of styrene and living trans-1,4-polymerization of 1,3-butadiene were catalyzed by 1,4-dithiabutandiyl-2,2′-bis(6-cumenyl-4-methylphenoxy) titanium dichloride (complex 1) activated by triisobutyl aluminum modified methylaluminoxane (MMAO) at room temperature to provide highly isotactic polystyrene (iPS) and 1,4-trans-polybutadiene (1,4-trans-PBD) with narrow molecular weight distribution. Furthermore, the iPS-b-1,4-trans-PBD was synthesized via sequential monomer addition in the presence of complex 1 and MMAO. The hydrogenation of the 1,4-trans-PBD block was promoted by RuCl₂(PPh₃)₃ used as a catalyst to produce iPS-b-PE.     

Emulsifier-free polymerization of <Emphasis Type="Italic">n</Emphasis>-butyl acrylate involving trithiocarbonates based on oligomer acrylic acid

The effect of the chain length of oligomer acrylic acid obtained in the presence of a low-molecularmass trithiocarbonate and the position of trithiocarbonate fragment (within the chain or at the chain end) on the process of emulsion polymerization of n-butyl acrylate and characteristics of the resulting dispersions has been studied for the first time. It has been found that, when using an oligomer with trithiocarbonate group located within the chain in the emulsion polymerization of n-butyl acrylate in a wide range of monomer–water phase compositions, triblock copolymers self-organizing in aqueous medium to give stable particles with the core–shell structure are formed. Oligomers with M _n ～ (5–10) × 10³ are optimal for synthesis of stable dispersions. In this case, block copolymers with the controlled length of hydrophobic block and a rather narrow MWD may be obtained. Thin films formed from these copolymers retain the structure of the initial dispersions on solvent removal. If the trithiocarbonate group in the oligomer is located at the chain end, the main polymerization product is a diblock copolymer. In this case, the formation of polymer–monomer particles occurs during a longer period of time, the control of MWD is weakened, and the dispersions of particles lose the aggregative stability after thin film formation.     

Synthesis of Graft Copolyimides with Poly(<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylamino-2-ethyl methacrylate) Side Chains and Hybrid Nanocomposites with Silver Nanoparticles

The controlled radical polymerization of N,N-dimethylamino-2-ethyl methacrylate on polyimide multicenter macroinitiators under the action of the activating complex of Cu(I) with nitrogen-containing ligands is studied. The complex investigation of the kinetics of copolymerization and the molecular-mass characteristics of the products is performed. The polarity of a medium and the nature of the nitrogen-containing ligand used to prepare the catalytic complex considerably affect the rate of polymerization and the composition and molecular-mass characteristics of the product. Process conditions that enable the synthesis of regularly graft copolyimides with poly(N,N-dimethylamino-2-ethyl methacrylate) side chains are determined. It is shown that the products of grafting copolymerization may be used as a nanoreactor and a stabilizing agent for the template synthesis of composite structures containing silver nanoparticles in the absence of additional reducing agents.     

Influence of mixed common solvent on the co-assembled morphology of PS-<Emphasis Type="Italic">b</Emphasis>-PEO and CdS quantum dots

The hybrid structures of polystyrene-b-poly(ethylene oxide) (PS-b-PEO) block copolymer and inorganic nanoparticles with good stability and biocompatibility have potential applications in drug delivery and bioimaging. Spherical co-assemblies of PS₁₂₀-b-PEO₃₁₈ and oleylamine-capped CdS quantum dots (QDs) are produced successfully in this work by adding water to a mixed common solvent, such as N,N-dimethylmethanamide (DMF)/chloroform, DMF/tetrahydrofuran (THF), or DMF/toluene. The energy dispersive X-ray (EDX) spectrum indicates that QDs are located at the interface between the core and shell of the spherical co-assemblies. The co-assembly process during water addition is traced by transmission electron microscopy (TEM) and turbidity measurement. Spherical co-assemblies are formed through budding from bilayers of the block copolymer and QDs. The morphology of the co-assemblies is related to the miscibility of the QD-dispersing solvents with water and the morphology changes from a spherical to a vesicle-like structure with DMF/toluene. Increasing THF content in the mixed solvent causes morphological transitions from spherical co-assemblies to multi-branched cylinders and micelles where QDs are located in the central core. Increasing chloroform content yields vesicle-like structures with protruding rods on the surface. The mechanism of the morphological transitions is also discussed in detail.     

Controlled radical polymerization of styrene and <Emphasis Type="Italic">n</Emphasis>-butyl acrylate mediated by trithiocarbonates

The free-radical bulk homopolymerization of styrene and n-butyl acrylate at 80°C mediated by dibenzyl trithiocarbonate, poly(styryl) trithiocarbonate, or poly(n-butyl acrylate) trithiocarbonate as reversible addition-fragmentation chain-transfer agents has been studied. It has been shown that the use of low-and high-molecular-mass reversible addition-fragmentation chain-transfer agents makes it possible to efficiently control the molecular-mass characteristics of polymers. In the case of styrene, the rate of polymerization slightly depends on the concentration of the addition-fragmentation chain-transfer agent. In contrast, for the polymerization of n-butyl acrylate, the rate significantly decreases with the concentration of the chain-transfer agent. Formation of radical intermediates during the polymerization of styrene and n-butyl acrylate mediated by trithiocarbonates has been studied by ESR spectroscopy. It has been demonstrated that the polymeric chain-transfer agents are efficient for the synthesis of block copolymers with the controlled block length.     

Micellization and gelation of the double thermoresponsive ABC-type triblock copolymer synthesized by RAFT

A double thermoresponsive ABC-type triblock copolymer(poly(ethyleneglycol)-block-poly(2-(2-methoxyethoxy) ethyl methacrylate)-block-poly(2-(2-methoxy ethoxy) ethyl methacrylate-co-oligo(ethylene glycol) methyl ether methacrylate, PEG-b-PMEO_2MA-b-P(MEO_2MA-co-OEGMA)) was designed and synthesized by reversible additionfragmentation chain transfer polymerization(RAFT). The ABC-type triblock copolymer endowed a thermal-induced twostep phase transition at 29 and 39 °C, corresponding to the thermosensitive properties of PMEO_2 MA and P(MEO_2MA-coOEGMA) segments, respectively. The two-step self-assembly of copolymer solutions was studied by UV transmittance measurement, dynamic light scattering(DLS), transmission electron microscopy(TEM) and so on. The triblock copolymers showed the distinct thermosensitive behavior with respect to transition temperatures, aggregate type and size, which was correlated to the degree of polymerization of thermosensitive blocks and the molar fraction of OEGMA in the P(MEO_2MAco-OEGMA) segments. In addition, micelles could further aggregate to form the hydrogel by the self-associate of PEG chains under the abduction of the concentration and temperature. The transition from sol to gel was investigated by a test tube inverting method and dynamic rheological measurement.     

Aqueous RAFT polymerization of acrylamide: A convenient method for polyacrylamide with narrow molecular weight distribution

Controlled and homogeneous free-radical polymerization of acrylamide(AM) in aqueous phase was realized by using S,S'-bis(α,α'-dimethyl-α'-acetic acid)-trithiocarbonate as a reversible addition-fragmentation transfer(RAFT) agent. Linear increases in molecular weight with conversion and narrow molecular weight distribution were observed for polyacrylamide(PAM) throughout the polymerization. By this method, PAMs with controlled molecular weight(up to 1.0 × 10~6) and narrow molecular weight distribution(M_w/M_n 1.2) were prepared. This study provides an effective method for synthesis of PAMs with narrow molecular weight distribution under environmentally friendly conditions.     

Synthesis of Block Copolymers of Styrene with <Emphasis Type="Italic">D</Emphasis>,<Emphasis Type="Italic">L</Emphasis>-Lactide by the Sequential Controlled Cationic Polymerization and Ring-Opening Anionic Polymerization

The cationic polymerization of styrene initiated by the system 2-chloro-2-phenylpropane–TiCl₄–pyridine is studied in a mixture CH₂Cl₂–n-hexane at a temperature of –80°С. It is shown that under these conditions polymerization occurs via the living mechanism at [monomer]: [initiator] ≤ 100. The method of preparing polystyrenes with terminal primary hydroxyl groups (M_n = 4000–10000 g/mol) by the sequential controlled cationic polymerization of styrene and the in situ alkylation of 4-phenoxy-1-butanol by polystyrene macrocations is proposed. The resulting functionalized polystyrenes are used as macroinitiators of anionic-coordination ring-opening polymerization of D,L-lactide in the presence of tin bis(2-ethyl hexanoate) [Sn(Oct)₂] in toluene at 80°С. Copolymers polystyrene-block-poly(D,L-lactide) with the controlled length of the poly(D,L-lactide) block (M_n = 10000–17000 g/mol) and a relatively low molecular-weight distribution (M_w/M_n = 1.6–1.8) are synthesized. Formation of the block copolymers is confirmed by ¹Н NMR spectroscopy, gel-permeation chromatography, and atomic force microscopy.     

Linear-Dendritic Block Copolymers Based on <Emphasis Type="Italic">N</Emphasis>-Isopropylacrylamide and Perfluorinated Polyphenylenegermane: Synthesis and Properties at Various Interfacial Boundaries

It is shown that linear-dendritic block copolymers poly(N-isopropylacrylamide)–block–polyphenylenegermane can be prepared by the polymerization of N-isopropylacrylamide in the presence of bis(pentafluorophenyl)germane followed by activated polycondensation with tris(pentafluorophenyl)germane. The properties of the dilute solutions and Langmuir monolayers of the functional polymers and the linear-dendritic block copolymers of N-isopropylacrylamide are studied.     

Ternary copolymers of acrylic acid, <Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide,and butyl acrylate: Synthesis and aggregative behavior in dilute solutions

Narrowly dispersed hydrophilic block and random copolymers of acrylic acid and N-isopropylacrylamide of various compositions and molecular masses are synthesized for the first time by controlled radical polymerization via the reversible addition-fragmentation chain-transfer mechanism. The copolymers are used for the synthesis of ternary copolymers with n-butyl acrylate. As shown by dynamic light scattering, the resulting amphiphilic copolymers can form stable dispersions in diluted aqueous solutions. It is found that the effective hydrodynamic radii of dispersion particles may be controlled via variation both in the primary structure of the ternary copolymer, i.e., the amount and sequence of hydrophilic and hydrophobic units, and in the external stimuli, i.e., the temperature and pH of a solution.     

<Emphasis Type="Italic">N</Emphasis>-aryl-<Emphasis Type="Italic">o</Emphasis>-iminobenzoquinones as novel regulators of radical polymerization

The effect of a number of quinoid compounds on methyl methacrylate polymerization initiated by azo-bis(isobutyronitrile) has been studied. It has been revealed that N-aryl-o-iminobenzoquinones, in contrast to o-benzoquinones, can provide radical polymerization of methyl methacrylate in controllable mode. The efficiency of the compounds as chain growth regulators has been found to depend on their composition and reaction conditions. It has been established that 4,6-di-tert-butyl-N-(2,6-diethylphenyl)-o-iminobenzoquinone and 4,6-di-tert-butyl-N-(2,6-diisopropylphenyl)-o-iminobenzoquinone under radical initiation conditions provide the synthesis of poly(methyl methacrylate) with wide-range molecular weight, retaining polydispersity indices about ~1.4–1.8 up to deep conversions.     

Self-assembly and electrochromic property of electroactive tetraaniline-<Emphasis Type="Italic">b</Emphasis>-PEG diblock copolymer

A kind of amphiphilic rod-coil diblock copolymer consisting both of tetraaniline (TAni) and polyethylene glycol (PEG) blocks, TAni-b-PEG, was synthesized. The diblock copolymer shows excellent electrochromic properties, especially, in switching time and coloration efficiency compared with tetraaniline. TAni-b-PEG is able to self-assemble into spherical structure, which is attributed to the formation of conducting channels and increase of ion-exchange capacity of TAni-b-PEG, implying that a block copolymer with electrochromic block and high ionic conductive block simultaneously possesses improving electrochromic properties.     

Synthesis of water soluble metalloporphyrin-cored amphiphilic star block copolymer photocatalysts for an environmental application

Two series of water-soluble metalloporphyrin-cored amphiphilic star block copolymers were synthesized by controlled radical polymerizations such as atom transfer radical polymerization (ATRP) and reversible addition fragmentation chain transfer (RAFT), which gave eight amphiphilic block copolymer arm chains consisting of poly(n-butyl acrylate-b-poly(ethylene glycol) methyl ether methacylate) (PnBA-b-PEGMEMA, M_n,GPC = 78,000, M_w/M_n = 1.2, 70 wt% of PPEGMEMA) and poly(styrene-b-2-dimethylamino ethyl acrylate) (PS-b-PDMAEA, M_n,GPC = 83,000, M_w/M_n = 1.2, 67 wt% of PDMAEA), yielding porphyrin(Pd)-(PnBA-b-PPEGMEMA)₈ and porphyrin(Pd)-(PS-b-PDMAEA)₈, respectively. Obtained metalloporphyrin polymer photocatalysts were homogeneously solubilized in water to apply to the removal of chlorophenols in water, and was distinguished from conventional water-insoluble small molecular metalloporphyrin photocatalysts. Notably, we found that the water-soluble star block copolymers with hydrophobic–hydrophilic core–shell structures more effectively decomposed the chlorophenol, 2,4,6-trichlorophenol (2,4,6-TCP), in water under visible light irradiation (k = 1.39 h^?1, t_1/2 = 0.5 h) in comparison to the corresponding water-soluble star homopolymer, because the hydrophobic core near the metalloporphyrin effectively captured and decomposed the hydrophobic chlorophenols in water.     

Mass Spectrometric Detection of Charged Silver Nanoclusters with Hydrogen Inclusions Formed by the Reduction of AgNO<Subscript>3</Subscript> in Ethylene Glycol

In the problem of the production silver nanoparticles, mass spectrometry allows one to identify nanoclusters as nuclei or intermediates in the synthesis of nanoparticles and to understand the mechanisms of their formation. Using low-temperature secondary emission mass spectrometry, we determined the cluster composition of a system formed in the microwave treatment of a solution of AgNO₃ in ethylene glycol (M). Along with silver ion–ethylene glycol associates М _m ? Ag⁺ (m = 1–5) and small silver clusters AgM _n ⁺ (n = 1–9), unusual silver clusters with one hydrogen atom [Ag _n H]⁺ (n = 2, 4) were observed. Possible pathways for the formation of silver nanoparticles taking into account hydrogen-containing cluster intermediates are discussed.     

Investigation of cationic soapless P(St-<Emphasis Type="Italic">co</Emphasis>-DMAEMA) latex and its electrostatic adsorption of laponite

Cationic poly(styrene-co-N,N-dimethylaminoethyl methacrylate) (P(St-co-DMAEMA)) latexes were prepared in the absence of surfactant by using 2,2’ -azobis (2-methylpropionamidine) dihydrochloride (AIBA) as the initiator. The effects of the AIBA concentration, HCl/DMAEMA molar ratio and DMAEMA amount on the emulsion polymerization and the latex properties were investigated. The particle morphology and size, the zeta potential and the amino distribution of the P(St-co-DMAEMA) latexes were characterized by transmission electron microscope (TEM), dynamic light scattering (DLS) and conductometric titration, respectively. Results showed that the emulsion polymerization performed smoothly with high monomer conversion and narrow particle size distribution under the optimized conditions with AIBA concentration of 1 wt%, HCl/DMAEMA molar ratio of 1.2 and DMAEMA content of 5 wt%. The diameter of the dried latex particles decreased and the density of amino groups on the particle surfaces increased with increasing the DMAEMA content. The zeta potential of the P(St-co-DMAEMA) latexes was pH-dependent and the zero point was around at pH 7.2. A facile method was developed to fabricate P(St-co-DMAEMA)/laponite hybrid nanoparticles via electrostatic adsorption, in which the loading capacity of laponite platelets reached 17.7 wt%, and the resultant hybrid nanoparticles showed good thermal stability.     

Compositions and structures of nanoparticles of pentagonal axial symmetry <Emphasis Type="Italic">D</Emphasis><Subscript>5<Emphasis Type="Italic">d</Emphasis></Subscript>: Nanotubes

The method of determination of the structure and the number of atoms in the shells of nanoparticles as a function of the arrangement of atoms at the symmetry elements of a symmetry group has been developed. The formulas for the calculation of the number of particles with symmetry group D _5d are reported. The number of particles in these shells is determined by three structurally invariant numbers and the “quantum number” of the group order n. The classification of all possible nanostructures with symmetry group D _5d is given: C _θ+10z , z = 0, 1, 2, …, where the basic shells are C _θ = C ₂, C ₁₀, C ₁₂. The sum rule has been obtained for the coordination numbers of shell sites located at symmetry axes. Pentagonal axial nanoparticles are shown to be the initial shells for obtaining (5,5) and (10,10) armchair nanotubes or (5,0) and (10,0) zigzag nanotubes. The general formula of these nanotubes closed with icosahedral and dodecahedral caps is N _20+10p , N _60+10p (p = 1, 2, …). The graphical constructions of all classes of nanoparticles and nanotubes of the pentagonal axial type are reported.     

Green Synthesis of Silver Nanoparticles Using <Emphasis Type="Italic">Commiphora caudata</Emphasis> Leaves Extract and the Study of Bactericidal Efficiency

The present study reports the synthesis of silver nanoparticles (Ag NPs) from silver nitrate solution using leaf extracts of Commiphora caudata. The formation of Ag NPs in the colloidal solution is confirmed by UV–Vis spectroscopy analysis. The identification of biomolecules is analyzed through fourier transform infrared spectroscopy. X-ray diffraction pattern shows that an average particle size of the synthesized nanoparticles are in the range of 40–24 nm. Field emission scanning electron microscopy and transmission electron microscopy confirm the formation Ag NPs in spherical shape. The photoluminescence study of the synthesized Ag NPs interprets the influence of C caudata leaf concentrations on emission behavior. Zeta potential measurement is carried out to determine the stability of synthesized Ag NPs. GC–MS analysis revealed that the C. caudata contained 11 compounds, such as Stigmasterol (24.14 %), Hexacosanoic acid, methyl ester (15.13 %) and 2-bromophenyl morpholine-4-carboxylate (11.71 %). The antibacterial activity of Ag NPs shows that these bio capped Ag NPs have higher inhibitory action for Escherichia coli, Klebsiella pheumoniea, Micrococcus flavus, Pseudomonas aeruginosa, Bacillus subtilis, Bacillus pumilus, Staphylococcus aureus.