Biodegradable microspheres with poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide) Enriched surface: Thermo-responsibility,biodegradation and drug release

Microspheres with thermo-responsible surface were fabricated by PCL-b-PEO-b-PNIPAM triblock copolymers. Thermo-responsible morphological changes of PCL-b-PEO-b-PNIPAM microspheres immersed in aqueous solution at temperatures above the LCST (e.g. 37 °C) were observed from porous surface structure to compact surface layer. Enzymatic degradation and in vitro drug release results showed that the thermo-responsible surface layer greatly influenced the degradation of microspheres as well as the drug release behavior from microspheres. With the copolymerization of PNIPAM block into PCL-b-PEO copolymers, the drug release could be well regulated by changing temperatures and microspheres composition, which revealed the great potentials of microspheres with thermo-responsible surface for controlled drug release.     

Synthesis of Block Copolymers of Styrene with <Emphasis Type="Italic">D</Emphasis>,<Emphasis Type="Italic">L</Emphasis>-Lactide by the Sequential Controlled Cationic Polymerization and Ring-Opening Anionic Polymerization

The cationic polymerization of styrene initiated by the system 2-chloro-2-phenylpropane–TiCl₄–pyridine is studied in a mixture CH₂Cl₂–n-hexane at a temperature of –80°С. It is shown that under these conditions polymerization occurs via the living mechanism at [monomer]: [initiator] ≤ 100. The method of preparing polystyrenes with terminal primary hydroxyl groups (M_n = 4000–10000 g/mol) by the sequential controlled cationic polymerization of styrene and the in situ alkylation of 4-phenoxy-1-butanol by polystyrene macrocations is proposed. The resulting functionalized polystyrenes are used as macroinitiators of anionic-coordination ring-opening polymerization of D,L-lactide in the presence of tin bis(2-ethyl hexanoate) [Sn(Oct)₂] in toluene at 80°С. Copolymers polystyrene-block-poly(D,L-lactide) with the controlled length of the poly(D,L-lactide) block (M_n = 10000–17000 g/mol) and a relatively low molecular-weight distribution (M_w/M_n = 1.6–1.8) are synthesized. Formation of the block copolymers is confirmed by ¹Н NMR spectroscopy, gel-permeation chromatography, and atomic force microscopy.     

Synthesis of urethane—acrylic multi-block copolymers via electrochemically mediated ATRP

The electrochemically mediated atom transfer radical polymerisation (eATRP) of n-butyl acrylate was investigated under a variety of catalyst concentrations. Poly(n-butyl acrylate)-block-polyurethane-block-poly(n-butyl acrylate) copolymers were prepared via electrochemically mediated atom transfer radical polymerisation (eATRP) using only 7 × 10^?6 mole % of Cu^II complex. The successful chain extension and formation of penta-block copolymers confirmed the living nature of the poly(alkyl acrylates) prepared by eATRP. In this work, the tri-block and penta-block urethane-acrylate copolymers were synthesised for the first time by using tertiary bromine-terminated polyurethane macro-initiators as transitional products reacting with n-butyl acrylate, and subsequently with tert-butyl acrylate in the presence of the Cu^IIBr₂/TPMA catalyst complex. The results of ¹H NMR spectral studies support the formation of tri-block poly(n-butyl acrylate)-block-polyurethane-block-poly(n-butyl acrylate) copolymers, and penta-block poly(tert-butyl acrylate)-block-poly(n-butyl acrylate)-block-polyurethane-block-poly(n-butyl acrylate)-block-poly(tert-butyl acrylate) copolymers.     

Glass formation in systems of mercury,cesium, and lead bromides

The results of studies of glass formation in the binary subsystems of the ternary system HgBr₂-PbBr₂-CsBr and in several samples whose compositions lie near ternary eutectic points of the indicated ternary systems are reported. The conditions for glass formation have been determined. The characteristic temperatures have been determined by DTA, and T _g /T _m ratios and H _R factors for glassy samples calculated.     

Linear-Dendritic Block Copolymers Based on <Emphasis Type="Italic">N</Emphasis>-Isopropylacrylamide and Perfluorinated Polyphenylenegermane: Synthesis and Properties at Various Interfacial Boundaries

It is shown that linear-dendritic block copolymers poly(N-isopropylacrylamide)–block–polyphenylenegermane can be prepared by the polymerization of N-isopropylacrylamide in the presence of bis(pentafluorophenyl)germane followed by activated polycondensation with tris(pentafluorophenyl)germane. The properties of the dilute solutions and Langmuir monolayers of the functional polymers and the linear-dendritic block copolymers of N-isopropylacrylamide are studied.     

Controlled radical copolymerization of styrene and <Emphasis Type="Italic">tert</Emphasis>-butyl acrylate in the presence of tri-<Emphasis Type="Italic">n</Emphasis>-butylborane–<Emphasis Type="Italic">p</Emphasis>-quinone catalytic system

Radical copolymerization of styrene with tert-butyl acrylate is studied under different conditions. It is found that the addition of tri-n-butylborane or tri-n-butylborane along with p-quinones (2,3-dimethylbenzoquinone, 2,5-di-tert-butylbenzoquinone) results in changes in the relative activities of monomers. Copolymerization in the presence of tri-n-butylborane and p-quinones proceeds via the mechanism of reversible inhibition and is characterized by the linear increase in number-average molecular weight with conversion and by the capacity of copolymers of reinitiation. The hydrolyzed copolymer samples form more stable films compared to copolymers prepared via conventional radical copolymerization.     

(Liquid + liquid) equilibria of methanol + ethylbenzene + isooctane + methy <Emphasis Type="Italic">tert</Emphasis>-butyl ether quaternary system at <Emphasis Type="Italic">T</Emphasis> = 303.15 K

Tie line data of {methanol + methyl tert-butyl ether + isooctane} ternary systems were obtained at T = 303.15 K, while data for {methanol + ethylbenzene + isooctane} were taken from literature. The ternary system {methanol + methyl tert-butyl ether + ethylbenzene} and {methyl tert-butyl ether + ethylbenzene + isooctane} were completely miscible. A quaternary system {methanol + ethylbenzene + isooctane + methyl tert-butyl ether} was also studied at the same temperature. In order to obtain equilibium data of the quaternary system, four quaternary sectional planes with several methyl tert-butyl ether/methanol ratios were studied. The effect of the addition of methyl tert-butyl ether on the liquid-liquid equilibrium data of {methanol + ethylbenzene + isooctane} ternary system has been investigate at the same temperature. The distribution curves for ternary and quaternary system was analysed. For the quaternary system {methanol + ethylbenzene + isooctane + methyl tert-butyl ether}, experimental data demonstrated that the distribution coefficient of ethylbenzene between the hydrocarbon and methanol phase on a methyl tert-butyl ether–free basis slightly increases with the increase of methyl tert-butyl ether/methanol ratio. Ternary experimental results were correlated with the UNIQUAC and NRTL equation. The NRTL equation is more accurate than the UNIQUAC equation for the ternary systems studied here. The equilibrium data of three ternary systems were used for determining interactions parameters for the UNIQUAC equation. The UNIQUAC equation fitted to the experimental data appeared to be more accurate than the UNIFAC method for the same quaternary system.     

Solutions of mixtures of cellulose and synthetic polymers in <Emphasis Type="Italic">N</Emphasis>-methylmorpholine-<Emphasis Type="Italic">N</Emphasis>-oxide

Phase state and morphological features of solutions of cellulose blends with rigid-chain thermotropic LC copolyesters and isotropic poly(m-phenyleneisophthalamide) in the highly polar donor solvent N-methylmorpholine-N-oxide are studied by DSC and polarization microscopy. The ternary phase diagram for the cellulose-copolyesters-N-methylmorpholine-N-oxide system is constructed. Rheological characteristics of the prepared solutions are studied using capillary and rotary rheometers under the regimes of continuous and periodic shear deformation. Rheological characteristics of cellulose solutions with copolyesters in N-methylmorpholine-N-oxide with their different phase states are shown to change in accordance with the traditional mechanism of flow for solutions with high specific interactions between their components. However, the character of the rheological behavior of mixtures of cellulose with poly(m-phenyleneisophthalamide) in N-methylmorpholine-N-oxide primarily stems from structural-morphological transformations in solutions taking place upon deformation.     

Formation of solvate structures by the <Emphasis Type="Italic">ortho</Emphasis>-, <Emphasis Type="Italic">meta</Emphasis>-, and <Emphasis Type="Italic">para</Emphasis>-isomers of hydroxybenzoic acid in supercritical fluid

The solvate structures formed by the ortho-, meta-, and para-isomers of hydroxybenzoic acid (o-HBA, m-HBA, and p-HBA) with a polar co-solvent (methanol at a concentration of 0.030 and 0.035 mole fractions) in supercritical carbon dioxide at a constant density of 0.7 g/cm³ and temperatures of 318 and 328 K have been studied by the classic molecular dynamics. It has been determined that a stable hydrogen-bonded complex with the co-solvent forms via the hydrogen of the carboxyl group for all isomers. The probability of this complex existence is high at all temperatures and concentrations. In the o-HBA molecule, the other functional groups are engaged in the intramolecular hydrogen bond, but not involved in interactions with methanol. It has been found that m-HBA and p-HBA can be involved in hydrogen bonds with methanol via hydroxyl hydrogen and oxygen atoms; they are characterized by the presence of one more co-solvent molecule (rarely, two molecules) in their solvation shell and intermittent formations/breakages of hydrogen bonds via other functional groups. These bonds are far less stable, and their formation is sensitive to change of temperature and co-solvent concentration. It has been concluded that the degree of selective solvation of m-HBA and p-HBA by co-solvent molecules is approximately the same, but the rate of structural rearrangements in the nearest environment of m-HBA is higher than that of p-HBA.     

Copolymers of Maleic Anhydride and Methylene Alkanes: Synthesis,Modification, and Pour Point Depressant Properties

Copolymers with the equimolar composition and presumably alternating microstructure are synthesized by the radical copolymerization of methylene alkanes, the products of dimerization of α-olefins with the general formula RCH₂CH₂C(=CH₂)R (R = n-C₄H₇, n-C₆H₁₃, n-C₈H₁₇, n-C₁₀H₂₁, n-C₁₂H₂₅), with maleic anhydride. The products of reactions between the obtained copolymers and 1-octadecanamine or 1-octadecanol are isolated and spectrally characterized. The depressor efficiency of the copolymers with respect to the solutions of paraffins in n-alkanes is studied. Qualitative differences between the copolymers of maleic anhydride with methylene alkanes and reference copolymers based on 1-octadecene are estimated using vibrational viscometry combined with analysis of the size and morphology of paraffin crystals. It is shown that the copolymers with methylene alkanes more effectively decrease the cold filter plugging point (CFPP) of paraffin solutions in n-decane.     

Synthesis of water soluble metalloporphyrin-cored amphiphilic star block copolymer photocatalysts for an environmental application

Two series of water-soluble metalloporphyrin-cored amphiphilic star block copolymers were synthesized by controlled radical polymerizations such as atom transfer radical polymerization (ATRP) and reversible addition fragmentation chain transfer (RAFT), which gave eight amphiphilic block copolymer arm chains consisting of poly(n-butyl acrylate-b-poly(ethylene glycol) methyl ether methacylate) (PnBA-b-PEGMEMA, M_n,GPC = 78,000, M_w/M_n = 1.2, 70 wt% of PPEGMEMA) and poly(styrene-b-2-dimethylamino ethyl acrylate) (PS-b-PDMAEA, M_n,GPC = 83,000, M_w/M_n = 1.2, 67 wt% of PDMAEA), yielding porphyrin(Pd)-(PnBA-b-PPEGMEMA)₈ and porphyrin(Pd)-(PS-b-PDMAEA)₈, respectively. Obtained metalloporphyrin polymer photocatalysts were homogeneously solubilized in water to apply to the removal of chlorophenols in water, and was distinguished from conventional water-insoluble small molecular metalloporphyrin photocatalysts. Notably, we found that the water-soluble star block copolymers with hydrophobic–hydrophilic core–shell structures more effectively decomposed the chlorophenol, 2,4,6-trichlorophenol (2,4,6-TCP), in water under visible light irradiation (k = 1.39 h^?1, t_1/2 = 0.5 h) in comparison to the corresponding water-soluble star homopolymer, because the hydrophobic core near the metalloporphyrin effectively captured and decomposed the hydrophobic chlorophenols in water.     

Thermochemical analysis of intermolecular interactions between <Emphasis Type="Italic">N</Emphasis>-acetylglycine and polyols in aqueous solutions

The integral enthalpies of dissolution Δ_sol H _m for N-acetylglycine in aqueous solutions of glycerol, ethylene glycol and 1,2-propylene glycol are measured via solution calorimetry. The standard enthalpies of dissolution (Δ_sol Н ⁰) and transfer (Δ_tr Н ⁰) for N-acetylglycine from water to aqueous solutions of polyhydric alcohols are calculated from experimental data. Positive values of enthalpy coefficients of pair interactions h _xy for amino acids and polyol molecules are calculated using the McMillan–Mayer theory. The results are discussed using an approach for evaluating different types of interactions in ternary systems and the effect the structural features of interacting biomolecules have on the thermochemical characteristics of N-acetylglycine dissolution.     

Synthesis,Structure, and Biological Activity of Products of Reactions of 3,4-Dioxohexane-1,6-dioic Acid Esters with 2-Aminophenol

Bioactive derivatives of 1,4-benzoxazine have been prepared via reactions of 3,4-dioxohexane-1,6- dioic (ketipic) acid esters with 2-aminophenol. (2'Z)-2,2'-(2-Hydroxy-2H-1,4-benzoxazin-2-yl-3-ilidene)diacetic acid esters or (2Z)-[2-oxo-2H-1,4-benzoxazin-3(4H)-ylidene]acetic acid esters can be formed depending on the conditions. The structures of the products of dialkyl ketipate esters reactions with 2-aminophenol were determined by means of X-ray diffraction. It has been demonstrated that the prepared compounds exhibit antimycotic activity against test cultures of plant pathogenic fungi (Fusauium sp., Alternarium sp., and Bipolaris soraciniana).     

Effect of Halogen Chain End Fidelity on the Synthesis of Poly(methyl methacrylate-<Emphasis Type="Italic">b</Emphasis>-styrene) by ATRP

Poly(methyl methacrylate-b-styrene) (PMMA-b-PS) block copolymers are synthesized by two consecutive ATRPs and fractionated into four fractions. The halogen chain end fidelity (CEF) in PMMA-b-PS is quantified based on the analysis of each fraction. Compared to ethyl 2-phenyl-2-bromoacetate/CuBr/2,2′-bipyridine (EPBA/CuBr/bpy) and CuBr/N,N,N′,N″,N″-pentamethyldiethylenetriamine (CuBr/PMDETA) catalysts, PMMA-b-PS synthesized using p-toluenesulfonyl chloride/CuCl/bpy (TsCl/CuCl/bpy) and CuCl/PMDETA catalysts has a higher halogen CEF and a better control on molecular weight.     

Preparation of starch-<Emphasis Type="Italic">g</Emphasis>-PMMA,starch-<Emphasis Type="Italic">g</Emphasis>-P(MMA/BMA) and starch-<Emphasis Type="Italic">g</Emphasis>-P(MMA/MA) nanoparticles and their reinforcing effect on natural rubber by latex blending: a comparative study

Nanoparticles including starch-graft-methylmethacrylate, starch-graft-(methylmethacrylate/methyl acrylate), starch-graft-(methyl methacrylate/butyl methacrylate) were synthesized via emulsifier-free emulsion polymerization and were blended with natural rubber latex at various mass ratios. Chemical structure of graft copolymers was confirmed by Fourier transform infrared. Transmission electron microscopy demonstrated the core-shell structures of the nanoparticles distributed uniformly around the natural rubble particles. The tensile strength of blend films was significantly enhanced by addition of graft copolymers. Besides, scanning electron microscopy and atomic force microscopy showed the blend film had smooth surface.     

The Study of Intermolecular Interactions for <Emphasis Type="SmallCaps">dl</Emphasis>-Alanine and Glycine in Aqueous <Emphasis Type="SmallCaps">l</Emphasis>(+)-Arabinose Solutions at Different Temperatures and Ambient Pressure,Using the Volumetric Approach

Density measurements are used to calculate the apparent molar volumes V_φ, limiting apparent molar volumes \(V_{\varphi }^{0}\), limiting apparent molar volumes of transfer, \(\Delta_{\text{t}} V_{\varphi }^{0}\), limiting apparent molar expansibilities, \(E_{\varphi }^{0}\), and hydration numbers n_H, for dl-alanine and glycine in aqueous solutions of l(+)-arabinose at T?=?293.15 to 313.15 K. To obtain the limiting apparent molar volume, the V_φ values are extrapolated to zero molality using the linear form of the Redlich–Meyer equation. Also, the limiting apparent molar volumes of transfer, \(\Delta_{\text{t}} V_{\varphi }^{0}\), for the amino acids, from water to aqueous l(+)-arabinose solutions, are calculated from the \(V_{\varphi }^{0}\) values. The limiting apparent molar expansibility, \(E_{\varphi }^{0}\), values have been obtained from the first derivative of limiting apparent molar volumes with respect to temperature. Also the hydration number, n_H, for both amino acids in the ternary solutions are estimated. Possible solute–solvent interactions in the studied ternary systems are discussed.     

Crystallization Behaviors and Regime Kinetics Analysis of Poly(<Emphasis Type="Italic">L</Emphasis>-lactide)-poly(butylene adipate)-poly(<Emphasis Type="Italic">L</Emphasis>-lactide) Based Multiblock Thermoplastic Polyurethanes

Poly(L-lactide)-based (PLLA) poly(ester-urethane)s are particularly relevant and gain significant attention due to their environment-friendly degradability and elastomeric shape memory capability. The tensile properties, resilience and degradation are strongly affected by their crystallization. This work was to investigate crystallization behaviors of the poly(L-lactide)-poly(butylene adipate)-poly(L-lactide) (PLLA-PBAPLLA) based thermoplastic polyurethane elastomers (PLAEUs) we synthesized previously. Dynamic scanning calorimetry (DSC) and polarized optical microscopy (POM) in combination with Avrami, Jezioney and Hoffman-Weeks models were used to analyze the impact of the PLLA block length on the crystallization temperature T_c, degree of crystallinity X_c, nucleation and spherulite growth mode and crystallization regime kinetics of the PLAEUs. The results indicate the low melting point poly(butylene adipate) (PBA) block resides in the amorphous domains while the PLLA block resides in both crystalline and amorphous phases. The X_c of the PLAEUs increase with the increased length of the PLLA block (i.e. higher content of PLLA block). The analyses with Avrami and Jezioney models show the PLAEU copolymers follow a disc-like spherulite growth. The covalently bonded PBA block decreases both nucleation velocity and spherulite growth rate in the isothermal crystallization. Such an impact is lessened as PLLA block length increases. The PLLA homopolymers demonstrate crystallization regime transition from II to III at a certain T_c of isothermal crystallization, while the crystallization regime kinetics of PLLA block in the PLAEUs are explained by a single regime III at low molecular weights of PLLA and the transition is restored as the PLLA block length increases (i.e. regime II to III).     

Electron-Transfer Secondary Reaction Matrices for MALDI MS Analysis of <Emphasis Type="Italic">Bacteriochlorophyll a</Emphasis> in <Emphasis Type="Italic">Rhodobacter sphaeroides</Emphasis> and Its Zinc and Copper Analogue Pigments

Bacteriochlorophyll a (BChl a), a photosynthetic pigment performing the same functions of chlorophylls in plants, features a bacteriochlorin macrocycle ring (18 π electrons) with two reduced pyrrole rings along with a hydrophobic terpenoid side chain (i.e., the phytol residue). Chlorophylls analysis by matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS) is not so straightforward since pheophytinization (i.e., release of the central metal ion) and cleavage of the phytol–ester linkage are invariably observed by employing protonating matrices such as 2,5-dihydroxybenzoic acid, sinapinic acid, and α-cyano-4-hydroxycinnamic acid. Using BChl a from Rhodobacter sphaeroides R26 strain as a model system, different electron-transfer (ET) secondary reaction matrices, leading to the formation of almost stable radical ions in both positive ([M]^+?) and negative ([M]^??) ionization modes at m/z 910.55, were evaluated. Compared with ET matrices such as trans-2-[3-(4-t-butyl-phenyl)-2-methyl-2-propenylidene]malononitrile (DCTB), 2,2':5',2''-terthiophene (TER), anthracene (ANT), and 9,10-diphenylanthracene (DP-ANT), 1,5-diaminonaphthalene (DAN) was found to provide the highest ionization yield with a negligible fragmentation. DAN also displayed excellent ionization properties for two metal ion-substituted bacteriochlorophylls, (i.e., Zn- and Cu-BChl a at m/z 950.49 and 949.49), respectively. MALDI MS/MS of both radical charged molecular species provide complementary information, thus making analyte identification more straightforward.

Open image in new window

Graphical Abstract ?

     

Thermal stability of chlorophyll <Emphasis Type="Italic">a</Emphasis> derivatives containing hydrophilic groups

Trends in thermal stability of aromatic macroheterocycles based of pheophorbide a and chlorin e ₆ containing hydrophilic groups have been revealed by means of thermogravimetric analysis at 298–1223 K under inert atmosphere. Methylpheophorbide a and 13(1)-N-methylamide of chlorin e ₆ are the most stable, the decomposition onset temperature being t _o 351 and 333°С. Their functional substitution leads t _o the reduction in thermal stability. Depending on the macrocycle structure the decrease in t _o can reach 20–200°С.     

Preparation,characterization and morphological study of poly(<Emphasis Type="Italic">m</Emphasis>-toluidine-<Emphasis Type="Italic">co</Emphasis>-<Emphasis Type="Italic">m</Emphasis>-aminoacetophenone) conductive copolymer

A new series of copolymers of poly(m-toluidine-co-m-aminoacetophenone) were synthesized by the chemical oxidative method in acid medium. The copolymers were characterized by UV–Vis and FTIR spectroscopy. X-ray diffraction analysis revealed the partial crystalline nature of copolymer. The morphological study by SEM analysis indicated that the surface of the copolymer had the granular structure of agglomerated morphology with average particle size of 200 nm. The conductivity of the copolymers ranged from 2 × 10^–4 to 3.3 × 10^–8 S/cm and the conductivity decreased with the increase of comonomer concentration. The resultant copolymers showed an enhanced solubility and an improved processability when compared with pure polyaniline.