Structural, electronic and elastic properties of MAX phases M2GaN (M = Ti, V and Cr)

Based on first-principles total energy calculations, we have investigated the systematic trends for structural, electronic and elastic properties of the MAX phases M₂GaN depending on the type of M transition metal (M are Ti, V and Cr). The optimized zero pressure geometrical parameters: the two unit cell lengths (a, c), the internal coordinate z and the bulk modulus are calculated. The results for the lattice constants are in agreement with the available experimental data. The band structures show that all studied materials are electrical conductors. The analysis of the site-projected l-decomposed density of states shows that bonding is due to M d-N p and M d-Ga p hybridizations. The elastic constants are calculated using the static finite strain technique. The shear modulus C₄₄, which is directly related to the hardness, reaches its maximum when the valence electron concentration is in the range 10.5–11.0. The isotropic elastic moduli, namely, bulk modulus (B), shear modulus (G), Young's modulus (E) and Poisson's ratio (σ) are calculated in framework of the Voigt–Reuss–Hill approximation for ideal polycrystalline M₂GaN aggregates. We estimated the Debye temperature of M₂GaN from the average sound velocity. This is the first quantitative theoretical prediction of the electronic structures, and elastic constants and related properties for Ti₂GaN, V₂GaN and Cr₂GaN compounds that require experimental confirmation.     

Theoretical investigations of the elastic,electronic, optical and thermodynamics properties of SrSi

The crystal structural, electronic, optical and thermodynamic properties of SrSi are investigated by using the first-principles plane-wave pseudopotential density function theory within the generalized gradient approximation (GGA). We have calculated the ground states properties and they are in good agreement with the available experimental data and other theoretical results. We have obtained the electronic structure and density of states, and the results showed that both of Immm and Cmcm phases are metal material. The elastic properties such as elastic constants, shear modulus, Young's modulus and Poisson's ratio are obtained for the first time. Furthermore, the optical properties are reported for radiation up to 30 eV. Finally, the thermodynamic properties of Cmcm phase such as free energy, entropy, enthalpy, heat capacity and Debye temperature are given for reference.     

Full potential study of the elastic, electronic, and optical properties of spinels MgIn2S4 and CdIn2S4 under pressure effect

The structural, elastic, electronic, and optical properties of cubic spinel MgIn₂S₄ and CdIn₂S₄ compounds have been calculated using a full relativistic version of the full-potential linearized-augmented plane wave with the mixed basis FP/APW+lo method. The exchange and correlation potential is treated by the generalized-gradient approximation (GGA). Moreover, the Engel-Vosko GGA formalism is also applied to optimize the corresponding potential for band structure calculations. The ground state properties, including the lattice constants, the internal parameter, the bulk modulus, and the pressure derivative of the bulk modulus are in reasonable agreement with the available data. Using the total energy-strain technique, we have determined the full set of first-order elastic constants C_ij and their pressure dependence, which have not been calculated or measured yet. The shear modulus, Young’s modulus, and Poisson’s ratio are calculated for polycrystalline XIn₂S₄ aggregates. The Debye temperature is estimated from the average sound velocity. Electronic band structures show a direct band gap (Г-Г) for MgIn₂S₄ and an indirect band gap (K-Г) for CdIn₂S₄. The calculated band gaps with EVGGA show a significant improvement over the GGA. The optical constants, including the dielectric function ε(ω), the refractive index n(ω), the reflectivity R(ω), and the energy loss function L(ω) were calculated for radiation up to 30 eV.     

Cr concentration driving the structural,mechanical, and thermodynamic properties of Cr-Al compounds from first-principles calculations

Cr-Al binary compounds are regarded as the potential high-temperature structural materials. However, the structure and important properties of Cr-Al compounds are not completely unclear. Here, we report on the influence of Cr concentration on the structural, mechanical, and thermodynamic properties of Cr-Al compounds by using the first-principles calculations. Four novel Cr-Al compounds, Cr₃Al₈ with monoclinic structure (C2/m), Cr₃Al₅ with hexagonal structure (P63mc), Cr₂Al₃ with tetragonal structure (I4/mmm), and Cr₃Al with cubic structure (Pm-3 m), are predicted. The calculated elastic modulus of Cr-Al compounds gradually increases with increasing Cr concentration. Compared to other Cr-Al compounds, our predicted Cr₃Al with cubic structure exhibits a strong deformation resistance and high hardness due to symmetrical Cr Al bonds. However, the Debye temperature of Cr₇Al₃ is larger than that of other Cr-Al compounds. The calculated phonon density of state shows that the high-temperature thermodynamic properties of Cr-Al compounds are attributed to the vibration of Al atom and Cr Al bond.     

First principles prediction of the elastic,electronic, and optical properties of Sb2S3 and Sb2Se3 compounds

We have performed a first principles study of structural, mechanical, electronic, and optical properties of orthorhombic Sb₂S₃ and Sb₂Se₃ compounds using the density functional theory within the local density approximation. The lattice parameters, bulk modulus, and its pressure derivatives of these compounds have been obtained. The second-order elastic constants have been calculated, and the other related quantities such as the Young's modulus, shear modulus, Poisson's ratio, anisotropy factor, sound velocities, Debye temperature, and hardness have also been estimated in the present work. The linear photon-energy dependent dielectric functions and some optical properties such as the energy-loss function, the effective number of valence electrons and the effective optical dielectric constant are calculated. Our structural estimation and some other results are in agreement with the available experimental and theoretical data.     

Exploring the structural,mechanical and thermodynamic properties of Ti-V solid solutions

Although Ti-V based high-temperature alloys are used in aerospace engine, rocket engine and hot sections, the structure and mechanical properties of Ti-V alloys remains controversy. To explore the correlation between structural and mechanical properties, we apply employed the DFT method to study the phases stability, mechanical and thermodynamic properties of Ti-V solid solution. Two Ti-V solid solutions: Ti(V)_ss solid solution and V(Ti)_ss solid solution are discussed. Two Ti-V solid solutions are thermodynamic stability. In particular, the Ti-V solid solution prefers to form V(Ti)_ss solid solution, in while the V(Ti)_ss solid solution remains cubic structure. Furthermore, the Ti(V)_ss solid solution is a mechanical instability. However, the V(Ti)_ss solid solution is a mechanical stability. Here, the bulk modulus, shear modulus and Young's modulus of V(Ti)_ss solid solution are 136.9, 23.5 and 66.7 GPa. In particular, the bulk modulus of V(Ti)_ss solid solution is higher than the bulk modulus of the pure Ti. In addition, the V(Ti)_ss solid solution shows better ductility compared to the pure Ti and V. Naturally, the stability and mechanical properties of V(Ti) solid solution is related to the Ti-V metallic bond because of the localized hybridization between the Ti(3d) and V(3d).     

First principles study of structural,electronic, elastic and thermal properties of YX (X = Cd,In, Au,Hg and Tl) intermetallics

The structural, electronic, elastic and thermal properties of YX (X = Cd, In, Au, Hg and Tl) intermetallic compounds crystallizing in B₂-type structure have been studied using first principles density functional theory within generalized gradient approximation (GGA) for the exchange correlation potential. Amongst all the YX compounds, YIn is stable in distorted tetragonal (P4/mmm) CuAu-type structure at ambient pressure with very small energy difference of 0.00681 Ry. but it undergoes to CsCl-type (B₂ phase) structure at 23.3 GPa. Rest of the compounds are stable in B₂ structure at ambient condition. The values of elastic moduli as a function of pressure are also reported. The ductility of these compounds has been analyzed using the Pugh rule. Our calculated results indicate that YTl is the most ductile amongst all the B₂-YX compounds. YAu is the hardest and less compressible compound due to the largest bulk modulus. The elastic properties such as Young's modulus (E), Poisson's ratio (σ) and anisotropic ratio (A) are also predicted. The anisotropic factor is found to be unity for YHg which shows that this compound is isotropic.     

The structural,mechanical, and thermodynamic properties of B2-type TMZr (TM = Ru,Mo, Rh,Os, and Re) compounds from first-principles calculations

The B2-type cubic Zr-based compounds are attractive advanced high-temperature materials because of the strong and symmetrical bonds. However, the mechanical and thermodynamic properties of the B2-type cubic Zr-based compounds are not well understood. Here, we use the first-principles calculations to investigate the structural, elastic modulus, ductility, and thermodynamic properties of TMZr (TM = Ru, Mo, Rh, Os, and Re) compounds. Two novel TMZr compounds, MoZr and ReZr, are first predicted by using the phonon dispersion and formation enthalpy, respectively. The results show that the B2-type TMZr compounds not only exhibit high elastic modulus but also show better ductility due to the symmetrical TM-Zr metallic bonds. In particular, the calculated elastic modulus of OsZr is larger than that of the other four TMZr compounds, indicating that the OsZr shows the strongest deformation resistance in five TMZr compounds. The calculated Θ _D of RuZr is 328 K, which is larger than that of the other four TMZr compounds. The calculated phonon density of state shows that the high-temperature thermodynamic properties of TMZr derive from the vibration of Zr atom. Therefore, our work predicts that the B2-type OsZr is an attractive high-temperature structural material.     

Structural,elastic, electronic and optical properties of the newly synthesized monoclinic Zintl phase BaIn2P2

The present study explores the structural, elastic, electronic and optical properties of the newly synthesized monoclinic Zintl phase BaIn₂P₂ using a pseudopotential plane-wave method in the framework of density functional theory within the generalized gradient approximation. The calculated lattice constants and internal coordinates are in very good agreement with the experimental findings. Independent single-crystal elastic constants as well as numerical estimations of the bulk modulus, the shear modulus, Young's modulus, Poisson's ratio, Pugh's indicator of brittle/ductile behaviour and the Debye temperature for the corresponding polycrystalline phase were obtained. The elastic anisotropy of BaIn₂P₂ was investigated using three different indexes. The calculated electronic band structure and the total and site-projected l-decomposed densities of states reveal that this compound is a direct narrow-band-gap semiconductor. Under the influence of hydrostatic pressure, the direct D–D band gap transforms into an indirect B-D band gap at 4.08 GPa, then into a B–Γ band gap at 10.56 GPa. Optical macroscopic constants, namely, the dielectric function, refractive index, extinction coefficient, reflectivity coefficient, absorption coefficient and energy-loss function, for polarized incident radiation along the [100], [010] and [001] directions were investigated.     

Investigation on the stability,electronic, optical,and mechanical properties of novel calcium carbonate hydrates via first-principles calculations

Calcium carbonate (CaCO₃) is an inorganic compound which is widely used in industry, chemistry, construction, ocean acidification, and biomineralization due to its rich constituent on earth and excellent performance, in which calcium carbonate hydrates are important systems. In Zou et al's work (Science, 2019, 363, 396-400), they found a novel calcium carbonate hemihydrate phase, but the structural stability, optical, and mechanical properties have not been studied. In this work, the stability, electronic, optical, and mechanical properties of novel calcium carbonate hydrates were investigated by using the first-principles calculations using density functional theory. CaCO₃·xH₂O (x = 1/2, 1 and 6) are determined dynamically stable phases by phonon spectrum, but the Gibbs energy of reaction of CaCO₃·1/2H₂O is higher than other calcium carbonate hydrates. That is why CaCO₃·1/2H₂O is hard to synthesize in the experiments. In addition, the optical and mechanical properties of CaCO₃·xH₂O (x = 1/2, 1 and 6) are expounded in detail. It shows that the CaCO₃·1/2H₂O has the largest bulk modulus, shear modulus, and Young's modulus with the values 60.51 GPa, 36.56 GPa, and 91.28 GPa. This work will provide guidance for experiments and its applications, such as biomineralization, geology, and industrial processes.     

High-throughput first-principle calculations of the structural,mechanical, and electronic properties of cubic XTiO3 (X = Ca,Sr, Ba,Pb) ceramics under high pressure

High-throughput first-principle calculations are implemented to study the structural, mechanical, and electronic properties of cubic XTiO₃ (X = Ca, Sr, Ba, Pb) ceramics under high pressure. The effects of applied pressure on physical parameters, such as elastic constants, bulk modulus, Young's modulus, shear modulus, ductile-brittle transition, elastic anisotropy, Poisson's ratio, and band gap, are investigated. Results indicate that high pressure improves the resistance to bulk, elastic, and shear deformation for XTiO₃ ceramics. Pugh's ratios B/G reveal that CaTiO₃ and PbTiO₃ ceramics are ductile, but SrTiO₃ and BaTiO₃ ceramics are brittle under the ground state. The brittle-to-ductile transition pressures are 24.26 GPa for SrTiO₃ and 43.23 GPa for BaTiO₃. Under high pressure, the strong anisotropy promotes the cross-slip process of screw dislocations, and then enhances the plasticity of XTiO₃ ceramics. Meanwhile, XTiO₃ (X = Ca, Sr, Ba) is intrinsically an indirect-gap ceramic, but PbTiO₃ is a direct-gap ceramic. High pressure increases the band gap of XTiO₃ (X = Ca, Sr, Ba) ceramic, but decreases that of PbTiO₃ ceramic. This work is helpful for designing and applying XTiO₃ ceramics under high pressure.     

Theoretical assessment of structural,mechanical, and thermodynamic properties of Pd2Al

The physical properties, namely structural, mechanical, and thermodynamic properties, of Pd₂Al intermetallic compound were explored through first-principles calculations within the framework of density functional theory. The calculated lattice constants were consistent with the available experimental data. The calculated elastic constants revealed that Pd₂Al was mechanically stable. By the predicted elastic constants, several related properties, namely Cauchy pressures, shear anisotropy factors, directional Young's modulus, bulk, shear and Young's moduli, the ratio of K/G, Vickers hardness, sound velocity, and minimum thermal conductivity for Pd₂Al were evaluated. According to the calculated results, it was found that Pd₂Al possesses a highly anisotropic feature and behaves in a ductile manner with low stiffness. Finally, temperature-dependence of thermodynamic properties, namely Debye temperature and heat capacity, were also evaluated through the quasi-harmonic Debye model.     

Soy Protein Isolate Based Films: Influence of Sodium Dodecyl Sulfate and Polycaprolactone-triol on Their Properties

Summary: We report on the preparation and properties of soy protein isolate (SPI)-sodium dodecyl sulfate (SDS)-polycaprolactone-triol (PCL-T) films obtained by solvent casting from solutions containing variable amounts of SDS or SDS/PCL-T. It is shown that the mechanical and thermal properties, and the morphology of SPI-based biofilms can be easily controlled by changing SDS, PCL-T, and moisture contents, enabling the fabrication of rigid and flexible materials as pure SPI films [Young's modulus ∼ 1 400 MPa, elongation at break (E) ∼ 2%, and glass transition temperature (T_g) ∼ 150 °C] and SPI/SDS/PCL-T films with [PCL-T] ≥ 18% (Young's modulus ∼ 50 MPa, E ∼ 90%, and T_g ∼ 135 °C), respectively. Micrographs taken at the cross-section of biofilms whose [PCL-T] ≥ 18% revealed the occurrence of a porous matrix, whereas a dense bulk phase was otherwise observed (pure SPI, SPI/SDS, and SPI/SDS/PCL-T films with [PCL-T] < 18%).     

Ethylene-Octene Copolymer-Nanosilica Nanocomposites: Effects of Epoxy Resin Functionalized Nanosilica on Morphology,Mechanical, Dynamic Mechanical and Thermal Properties

A comparative study of the structural, thermal, mechanical and thermomechanical properties of ethylene-octene copolymer 1

1 Ethylene-octene copolymer is produced using Dow's INSITETM ™ constrained geometry catalyst and process technology. ENGAGE the trade name of this copolymer.

(mPE) 2

2 This copolymer will be represented as mPE .

nanocomposites synthesized with pure nanosilica (NS) and nanosilica-functionalized with diglycidyl ether of bisphenol-A (ENS) has been reported. These nanocomposites were prepared using “melt mixing” method at a constant loading level of 2.5 wt. %. The effects of pure nanosilica (NS) and epoxy resin-functionalized-nanosilica (ENS) on the above mentioned properties of ethylene-octene copolymer were analyzed by wide-angle-x-ray diffractometer (WAXD), transmission electron microscope (TEM), thermo gravimetric analyzer (TGA), differential scanning calorimeter (DSC), dynamic mechanical analyzer (DMA) and scanning electron microscope (SEM). TEM studies have shown a better dispersion of nanoparticles in case of ethylene-octene copolymer-epoxy resin-functionalized-nanosilica nanocomposite (mPE-ENS) than that of ethylene-octene copolymer-nanosilica nanocomposite (mPE-NS). The tensile tests show that organic modification of nanosilica particles brings up an appreciable increase in yield strength, ultimate tensile strength and elongation at break of the polymer. DMA studies have shown an increase in the storage modulus and glass transition temperature for mPE-ENS with respect to mPE-NS. Further, the TGA results have shown a higher thermal stability for mPE-ENS in comparison to mPE-NS.     

The influence of high pressure on the structural stability,Vickers hardness and mechanical properties of Re and Ru dodecaborides

We apply the first-principles approach to study the structural stability, Vickers hardness, and elastic modulus of ReB₁₂ and RuB₁₂. In particular, we further investigate the influence of high pressure on the structural stability and mechanical properties of ReB₁₂ and RuB₁₂. The calculated results show that ReB₁₂ and RuB₁₂ are thermodynamic stability under high pressure. Here, ReB₁₂ is more thermodynamic stability than that of the RuB₁₂. The calculated Vickers hardness of ReB₁₂ and RuB₁₂ is 16.25 and 16.55 GPa, respectively. It is found that the calculated elastic constants and elastic modulus of ReB₁₂ and RuB₁₂ increase with increasing pressure. In particular, the calculated elastic constants and elastic modulus of ReB₁₂ are larger than that of the RuB₁₂. The calculated electronic structure shows that the high hardness and elastic modulus of ReB₁₂ and RuB₁₂ are attributed to the 3D network B-B covalent bonds.     

Synthesis and Surface Properties of Novel N-Alkyl Quinoline-Based Cationic Gemini Surfactants

Two series of cationic dimeric (gemini) surfactants are prepared with respect to key surfactants properties, such as surface activity and solubilization. The influence of both the dimerization and the spacer group is examined in order to establish structure-property relationships. The surface tension and critical micelle concentration can be markedly reduced compared to the monomeric surfactants in the pure state. The critical micelle concentration (cmc) of each series has been determined using equilibrium surface tension measurements. Furthermore, air/water interface parameters including effectiveness (π_cmc), efficiency (P_C20), maximum surface excess (Γ _max ), and minimum surface area (A _min ) have been also derived using Gibb's adsorption equation at 25°C. Standard free energies of micellization and adsorption were calculated. Solubilization behaviors of the synthesized surfactants were measured towards paraffin oil as solubilized material using light transmission technique.     

First-principles investigations on structural,electronic and elastic properties of BeSe under high pressure

The structural, electronic and elastic properties of BeSe in both B3 and B8 structures have been studied by first-principles calculations within the generalized gradient approximation (GGA). The calculated lattice parameters and bulk modulus of BeSe are in reasonable agreement with previous results. The predicted value of phase transition pressure from B3 to B8 is 50.24 GPa, which is well in line with the experimental data (56 ± 5 GPa). The calculation of the electronic band structure shows that the energy gap is indirect for B3 and B8 phases. Especially, the elastic constants of B8 BeSe under high pressure were studied for the first time. The bulk modulus, shear modulus, compressional and shear wave velocities of B8 BeSe evaluated from elastic constants as a function of pressure were investigated. In addition, Poisson's radio, elastic anisotropy and Debye temperature were analyzed successfully.     

Theoretical prediction of the electronic and thermodynamic properties of YN‐ZrN solid solutions

In this study, the results of structural parameters, electronic structure, and thermodynamic properties of the Zr_xY_1–xN solid solutions are presented. The effect of zirconium composition on lattice constant, and bulk modulus shows nonlinear dependence on concentration. Deviations of the lattice constant from Vegard's law and deviations of the bulk modulus from linear concentration dependence were found. Our findings indicate that the Zr_xY_1–xN solid solutions are metallic for x = 0.25, 0.5, 0.75. The calculated excess mixing enthalpy is positive over the entire zirconium composition range. The positive mixing enthalpies for Zr_xY_1–xN alloys indicate the existence of miscibility gaps and spinodal decompositions. The effect of temperature on the volume, bulk modulus, Debye temperature, and the heat capacity for Zr_xY_1–xN alloys were analyzed using the quasi‐harmonic Debye model. Results show that the heat capacity is slightly sensitive to composition as temperature increases. © 2015 Wiley Periodicals, Inc.