聚乙二醇单甲醚修饰多壁碳纳米管的研究

多壁碳纳米管(MWNT)经过酸化、酰氯化后与聚乙二醇单甲醚进行接枝反应,实现了碳纳米管的表面修饰。经修饰的MWNT在水中的分散性大大增加。通过FTIR、XPS、Raman、TEM、TGA等手段表征了接枝后产物的化学结构,证明聚乙二醇单甲醚是以共价键的形式接入MWNT表面上的。并利用TGA结果估算出聚乙二醇单甲醚在MWNT表面的接枝密度约为平均每256个碳原子上有一根聚合物链。     

新型梳状高分子固体电解质的研究：Ⅰ.聚合物主体物的合成与表征

聚乙二醇单甲醚和甲醇依次与马来酸酐／乙烯基甲醚交替共聚物在溶液中两度酯化，合成了侧链长度不同的３种梳形高分子。用丁酮作为酯化反应介质可使反应完全。产物为白色橡胶状固体，成膜性较好。借助ＩＲ、１３ＣＮＭＲ和元素分析手段对产物的结构进行了确认。     

聚乙二醇类单体的制备及其生物相容性测定

聚乙二醇类单体是合成功能性高分子材料的重要单体。直接酯化法是合成此类单体的主要方法,但利用该法所制备产物的双键保留率偏低。针对这一问题,本文以聚乙二醇单甲醚-200和丙烯酸为原料,在携水剂存在的同时,向反应体系中引入变色硅胶,提高了直接酯化法去除生成水的效率,制备出了高双键保留率、高产率的聚乙二醇单甲醚-200丙烯酸酯(MPEGA-200),并采用红外光谱、1H NMR对产物进行了表征,采用过氧化氢酶评价了产物的生物相容性。通过正交实验确定了最佳合成条件为:醇酸摩尔比1:2,催化剂对甲苯磺酸和阻聚剂对苯二酚加量均为2%,变色硅胶占醇酸总质量的12%,携水剂石油醚60~90加量为18%,反应温度120℃,反应时间6h。在此条件下,酯化率可达95.47%,MPEGA-200的双键保留率为95.45%,产率为87.68%。另外,本文还采用单因素法研究了各反应条件对酯化反应的影响规律。     

聚苯并咪唑-锂盐-聚乙二醇单甲醚共混全固态聚合物电解质的制备及性能

使用共混后浇铸成膜的方法,制备了聚苯并咪唑-锂盐-聚乙二醇单甲醚组成的锂离子电池共混全固态聚合物电解质。通过傅里叶红外光谱(FT-IR)、X射线衍射(XRD)、差示扫描量热(DSC)、拉伸与交流阻抗测试表征了共混全固态电解质的结构与性能。研究了不同锂盐以及各组分含量对共混全固态电解质的力学性能与电导率的影响。结果表明:聚苯并咪唑与聚乙二醇单甲醚之间存在氢键;共混全固态电解质中聚乙二醇单甲醚处于无定形态;锂盐的加入使聚乙二醇单甲醚的玻璃化转变温度下降;聚乙二醇单甲醚含量越高,共混膜强度越低,电导率越高,并且使用三氟甲磺酸锂作为锂盐时其电导率最高,室温下可以达到3.58×10~(-5) S/cm,高温下可以达到3.3×10~(-3) S/cm,高温下满足对锂离子电池的使用需求。     

四臂星形嵌段共聚物s-PDLLA-b-PEG的合成

季戊四醇与D,L-丙交酯开环聚合制得末端为羟基的四臂星形聚乳酸(s-PDLLA);s-PDLLA与羧基封端的聚乙二醇单甲醚(CT-mPEG)完成酯化反应,合成了以季戊四醇为核,以聚乳酸为内部嵌段、聚乙二醇为外部嵌段的四臂星形聚(D,L-乳酸)-聚乙二醇嵌段共聚物(s-PDLLA-b-PEG),其结构经1H NMR,IR和GPC表征。     

聚乙二醇甲醚-聚(D,L-乳酸)嵌段共聚物纳米胶束的制备

聚乙二醇甲醚-聚(D;L-乳酸)嵌段共聚物纳米胶束的制备;聚乙二醇单甲醚;两亲性二嵌段共聚物;纳米沉淀技术     

甲氧基聚乙二醇-b-聚L-半胱氨酸两亲性嵌段共聚物的合成与表征

首先以聚乙二醇单甲醚(mPEG-OH)为单体,采用经典的盖布瑞尔伯胺合成法合成了端氨基聚乙二醇单甲醚(mPEG-NH_2);然后以mPEG-NH_2为引发剂,S-苄基L-半胱氨酸N-羧酸内酸酐(BCys-NCA)为原料,通过N-羧酸内酸酐(NCA)开环聚合反应和液氨/钠处理脱除侧链上的保护基团,合成了两亲性嵌段共聚物甲氧基聚乙二醇-b-聚L-半胱氨酸(mPEG-b-PCys)。采用傅里叶变换红外光谱、核磁共振氢谱对聚合物的结构和组成进行了表征。结果表明:成功制备了侧链具有还原性巯基的两亲性嵌段共聚物mPEG-b-PCys,并且其聚合度可控性良好。     

双短链聚乙二醇单甲醚修饰的雷帕霉素水溶性前药的合成

以Boc保护的谷氨酸和聚乙二醇500单甲醚为原料,经4步反应合成了具有良好水溶性的双短链聚乙二醇结构修饰的雷帕霉素前药（1）,其结构经^1H NMR确证。初步的研究结果表明：1具有良好的水溶性,在小鼠体内能够释放出雷帕霉素。     

大孔聚苯乙烯树脂支载聚乙二醇的合成及其催化性能的研究

聚乙二醇(PEG)是一类有效的相转移催化剂。将长链PEG或其单甲醚支载到微孔聚苯乙烯树脂上,制成相转移催化剂,催化有机反应已有许多报道。但将PEG支载到大孔     

反相高效液相色谱法测定聚羧酸类减水剂合成原料

提出了反相高效液相色谱法同时测定聚羧酸类减水剂"大单体"原料中甲基丙烯酸(MA)、聚乙二醇单甲醚(MPEG)和聚乙二醇单甲醚甲基丙烯酸酯(MPEG-MA)的含量。以ZOR-BAX 300SB-C18柱为分离柱,以不同体积比的甲醇和0.1%三氟乙酸(体积比,pH 2.0)的混合溶液为流动相进行梯度洗脱,用紫外检测器于波长218nm检测MA,在蒸发光检测器载气流量和漂移管温度分别为1.2L.min-1和80℃时检测MPEG和MPEG-MA。结果表明:样品中3个大单体原料的残留量存在较大差异。     

维生素K3电化学反应机理的紫外光谱电化学研究

用薄层池循环伏安法和现场薄层池紫外光谱电化学法研究了维生素Ｋ３（ＶＫ３）在铂电极上的电化学反应机理。薄层池循环伏安实验结果表明：ＶＫ３的电化学反应为二步１ｅ准可逆过程，现场薄层池紫外光谱电化学的实验结果和Ｎｅｒｎｓｔ图解分析表明：电解还原反应的最后产物为２－甲基－１，４－萘酚。该反应偶合有前行化学反应；还原产物经电解氧化的产物为２－甲基－１，４－萘酚。该反应偶合有前行化学反应；还原产物经电解氧化的     

荧光增白剂4,4′-二(4-磺酸钠苯乙烯基)二苯甲酮的合成

用Heck反应合成了4,4′-二(4-磺酸钠苯乙烯基)二苯甲酮.对Heck反应条件进行了改进,使用壳聚糖负载钯为催化剂并考察了催化剂的回收再利用情况.通过研究影响该反应的各种因素,如反应时间、反应温度、原料配比等,优化了实验条件,得到了较好的结果.     

Study on the reaction kinetics between PBT and epoxy by a novel rheological method

In the present study, the reaction kinetics of polybutylene terephthalate (PBT) and epoxy system was studied by a novel rheological method. The reaction process was determined by rheological test and the results showed that there were three stages in the reaction between PBT and epoxy, which were reaction-controlling stage (stage I), reaction-stagnation stage (stage II) and diffusion-controlling stage (stage III). In addition, the stage I was selected to study the reaction kinetics by the rheological method. The results showed that the reaction between PBT and epoxy could be classified as a pseudo-first-order reaction due to the excessive amount of epoxy group. Furthermore, the reaction apparent activation energy of the stage I determined by the rheological method was 143 kJ/mol. To confirm these results, the reaction kinetics was also evaluated by the endgroup determination method, and the results showed that the reaction could also be classified as a pseudo-first-order reaction. Moreover, the apparent activation energy of the reaction was 116 kJ/mol, which was similar to that of the value obtained by the rheological method.     

苯并噻唑-2-甲醛合成方法的改进

以邻氨基苯硫酚为原料,先与羟基乙酸反应合成2-羟甲基苯并噻唑,然后通过氧化反应生成苯并噻唑-2-甲醛。对比了几种氧化剂的效果,发现二氧化锰氧化的效果最好。优化的反应条件为,2-羟甲基苯并噻唑与二氧化锰的摩尔比为1∶8,回流反应8h,产率可达90.2%。该方法适合苯并噻唑-2-甲醛及其衍生物的大规模生产。     

Study of the reaction between boron trifluoride methanol complex and sodium methoxide

The reaction between boron trifluoride methanol complex and sodium methoxide in methanol solution was investigated using conductivity as the reaction indicator. The reaction conditions were examined and a mechanism of this reaction was proposed. Moreover, proper reaction conditions were proposed for boric acid preparation using this reaction.     

三苯基环戊二烯扩环反应研究

研究在高氯酸银作用下,三苯基环戊二烯扩环氧化生成三苯基取代吡喃盐的反应,并初步探讨了反应机理     

Direct partial oxidation of methane to methanol： Reaction zones and role of catalyst location

Direct partial oxidation of methane to methanol was investigated in a specially designed reactor. Methanol yield of about 7%-8% was obtained in gas phase partial oxidation. It was proposed that the reactor could be divided into three reaction zones, namely pre-reaction zone, fierce reaction zone, and post-reaction zone, when the temperature was high enough to initiate a reaction. The oxidation of methane proceeded and was completed mostly in the fierce reaction zone. When the reactant mixture entered the post-reaction zone, only a small amount of produced methanol would bring about secondary reactions, because molecular oxygen had been exhausted in the fierce reaction zone. A catalyst, if necessary, should be placed either in the pre-reaction zone, to initiate a partial oxidation reaction at a lower temperature, or in the fierce reaction zone to control the homogeneous free radical reaction.     

氯固相合成Ti-ZSM-5催化苯乙烯环氧化对映选择性 的研究

用TiCl~4气固相同晶取代法制得的Ti-ZSM-5作催化剂。研究了以H~2O~2为氧化剂氧化苯乙烯生成环氧苯乙烷的对映选择性,发现生成的环氧苯乙烷主要以R构型为主。考察了反应时间,反应温度,催化剂Ti-ZSM-5以及氧化剂[w(H~2O~2)=30%]的用量等反应条件对苯乙烯环氧化反应对映性的影响。结果表明,反应温度是影响环氧化反应对映选择性的重要因素,降低反应温度有利于提高对映选择性(ee),当反应温度≤40℃时,ee值可达100%;而反应时间,催化剂及氧化剂[w(H~2O~2)=30%]用量对环氧化反应的对映选择性几乎没有影响。     

纳米TiO_2光催化芳香醛的缩醛反应研究

本文以纳米TiO2为催化剂,UV-LED（=365 nm）为紫外光源,在自制的恒温石英玻璃光催化反应器中成功实现了芳香醛的非均相光催化缩醛反应.以乙醇等作为溶剂和反应物,快速高效和高选择性地合成了苯甲醛二乙基缩醛（BDA）.在光强为0.6 mw/cm2,苯甲醛初始浓度为0.05 mol/L,催化剂TiO2（P25）用量为5.0 g/L,反应时间为15 min的条件下,苯甲醛二乙缩醛的产率可达99.86%.研究表明,氧气的存在是顺利发生光催化缩醛反应的重要条件.反应液pH值、醇溶剂种类及苯环对位取代基等因素都会对光催化缩醛反应速率和产率产生影响.pH值及醇溶剂的pKa越小,缩醛反应速率越快.苯环上对位取代基会抑制缩醛反应的进行,其中供电子取代基相对吸电子取代基更有利于缩醛反应进行.结合实验,提出了光催化缩醛反应的机理.     

Optimization of reaction conditions for REM resin-bound quaternization reactions

A study into the effect of reaction variables on the quaternization of REM resin-bound tertiary amines was undertaken. The influence of resin matrix, solvent, reaction time, temperature, and amount of quaternization agent on the outcome of reaction was evaluated by reaction monitoring using (19)F NMR. The highest yields of tertiary amine products were seen when DMSO was used as reaction solvent in conjunction with a reaction time of 18 h at room temperature. The use of heating for extended reaction times tended to depress yields, indicating product cleavage during quaternization. Quaternization on PS-DVB resin was found to be more robust than reaction on PS-PEG matrices where yields were generally considerably lower than the observed conversions. DMSO was the most efficient reaction solvent for both resins despite poor swelling of the quaternization starting material.