桑葚状CaF_2纳米材料的合成及CaF_2:Yb~(3+)的光学性质

通过一步水热法合成了分散性良好、尺寸均一的桑葚状CaF2纳米材料.采用X射线粉末衍射(XRD)、场发射扫描电子显微镜(FESEM)和透射电子显微镜(TEM)对产物的结构、形貌及尺寸进行了表征,发现CaF2纳米材料是由尺寸约为50 nm的纳米粒子构成.通过对不同反应阶段产物的分析提出了其形成机理.研究了Yb3+掺杂CaF2纳米材料的近红外发光性质.     

桑葚状CaF2纳米材料的合成及CaF2:yb3+的光学性质

通过一步水热法合成了分散性良好、尺寸均一的桑葚状CaF2纳米材料,采用X射线粉末衍射(XRD)、场发射扫描电子显微镜(FESEM)和透射电子显微镜(TEM)对产物的结构、形貌及尺寸进行了表征,发现CaF2纳米材料是由尺寸约为50 nm的纳米粒子构成.通过对不同反应阶段产物的分析提出了其形成机理,研究了yb3+掺杂CaF...     

不同形貌YF_3微米晶的水热合成及YF_3:Eu~(3+)荧光性质(英文)

水热条件下,Y(NO3)3·6H2O分别与K2SiF6、KPF6反应得到了不同形貌的YF3(八面体及椭球形)。以X射线光电子能谱(XPS)检测了产物的化学组成,表明产物中只含有Y和F。X射线衍射(XRD)结果表明所得的产物均为正交晶系。扫描电子显微镜(SEM)和透射电子显微镜(TEM)对产物的表征结果指明八面体形YF3棱长为200nm,而椭球形YF3是由小的纳米块自组装而成。还研究了Eu3+掺杂后YF3的荧光性质,并提出了可能的形成机理。     

pH值对LaVO_4:Eu~(3+)纳米晶的相变及发光性能的影响

运用水热法通过调节p H值制备了La VO4:Eu3+纳米晶体,采用XRD,SEM,TEM,PL对产物进行了表征,研究了单一因素p H对产物物相、形貌以及发光性能的影响。XRD结果表明,p H为8时可以得到纯的四方相La VO4:Eu3+晶体;SEM与TEM结果表明,生成的产物形貌有片状、六方棒状、针状和蠕虫状;PL结果表明具有片状、针状单斜相和六方棒状四方相的La VO4:Eu3+晶体具有最好的发光性能。     

乙二胺四乙酸辅助水热法合成NaYF_4纳米晶

用络合剂乙二胺四乙酸(EDTA)辅助水热法合成了NaYF4纳米球和微米棱柱,通过控制反应条件得到了立方相和六方相纳米晶体;采用X射线粉末衍射仪(XRD)、扫描电子显微镜(SEM)及荧光光谱仪(PL)分析了产物的结构、形貌及发光性能.结果表明,络合剂EDTA和氟化物的物质的量对NaYF4的形貌和粒度有很大影响,且产物的荧光性能呈现出尺寸依赖性.     

低氧含量KAlF4:Ce3+制备、表征及荧光性质的研究

采用乙二醇回流法合成了复合氟化物KAlF4和KAlF4:Ce3+纳米粒子,并利用X射线衍射(XRD),透射电子显微镜(TEM),X射线光电子能谱(XPS)等技术对其结构、形貌、粒径大小以及表面含氧量进行了表征.结果表明,采用回流法在适当的反应条件下可制得单一晶相的KAJF4和KAlF4:Ce3+纳米粒子,其平均粒径为32.5nm.KAlF4的O1s的XPS分峰谱图表明,其表面只有一种氧种为化学吸附氧(α氧),且表面氧的含量小于5%.KAlF4:Ce3+的发射光谱中最大发射峰位于330nm处,归属于Ce3+的5d→4f跃迁.     

LaF3纳米片和棒束的选择性合成及表征

室温条件下,以简单的液相法,通过改变氟源NaBF4和K2SiF6,制得不同形貌的LaF3纳米晶(片及棒束).X射线衍射(XRD)结果显示所得的2种不同形貌的产物均为结晶良好的六方相LaF3.场发射扫描电子显微镜(FE-SEM)、透射电子显微镜(TEM)结果表明由NaBF4制得大量均匀、厚度约为20 am的六边形纳米片....     

水热法合成ReMn2O5(Re=Gd，Sm，Yb)纳米粉体

本文采用水热法,以KMnO4和Mn(C2H3O2):为锰源,在250℃反应24 h合成了高各向异性的GdMn2O5、SmMn2O5和YbMn2O5纳米粉体.利用X射线粉末衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、选区电子衍射(SAED)、和高分辨透射电镜(HRTEM)对产物的结构和形貌进行了表征.结果表明,所制备的ReMn2O5(Re=Gd,Sm,Yb)均为正交相结构.反应溶液中碱性矿化剂浓度对产物的形貌和尺寸有重要的影响.通过实验结果分析了纳米结构的形成机理.     

生物分子辅助溶剂热合成硫化锑纳米棒

以SbCl3和L-胱氨酸为反应原料,采用溶剂热法在170℃反应12h,制得硫化锑(Sb2S3)纳米棒.X射线衍射(XRD)、能量分散光谱(EDS)和X射线光电子能谱(XPS)研究表明所得产物为典型的Sb2S3正交结构.场发射扫描电子显微镜(FESEM)和透射电子显微镜(TEM)研究显示,Sb2S3纳米棒长为3～6μm,平均直径约为150nm.讨论了不同反应时间对Sb2S3的形成及其形貌的影响,并根据实验结果对所合成的一维纳米棒可能的形成机理进行了简单的探讨.     

Co3O4空心球的简易合成及其电化学性能

通过简易的水热法"一锅"制备了Co3O4空心球。借助X射线衍射仪(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和傅里叶变换红外光谱法(FTIR)等对Co3O4的结构和形貌进行了表征。结果表明,产物由Co3O4纳米粒子构成,并形成明显的空心多孔结构。循环伏安法(CV)测试表明,所制得的Co3O4空心球呈现良好的电化学性能。本文同时对Co3O4空心球结构的形成过程和可能的机理进行了分析和讨论。     

Synthesis and characterization of single-crystal Ce(OH)CO3 and CeO2 triangular microplates

Single-crystal cerium hydroxide carbonate (Ce(OH)CO3) triangular microplates with the hexagonal phase have been successfully synthesized by a hydrothermal method at 150 degrees C using cerium nitrate (Ce(NO3)3.6H2O) as the cerium source, aqueous carbamide as both an alkaline and carbon source, and cetyltrimethylammonium bromide (CTAB) as a surfactant. Single-crystal ceria (CeO2) triangular microplates have been fabricated by a thermal decomposition-oxidation process at 650 degrees C for 7 h using single-crystal Ce(OH)CO3 microplates as the precursor. The shape of the Ce(OH)CO3 microplate was sustained after thermal decomposition-oxidation to CeO2. The products were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), field-emission scanning electron microscopy (FE-SEM), differential scanning calorimetric analysis (DSC), and thermogravimetric analysis (TG).     

大面积Bi单晶纳米线阵列的制备

在有序的氧化铝模板(AAO)的孔洞中, 采用电化学沉积工艺成功地制备了准金属Bi纳米线有序阵列. 使用X射线衍射仪(XRD)、场发射扫描电子显微镜(FE-SEM)、透射电子显微镜(TEM)及高分辨电子显微镜(HRTEM)对样品的结构和形貌进行了表征. XRD结果表明, 所制备的铋样品为六方相, 且沿[110]方向有很好的生长取向; FE-SEM图片清晰地说明铋纳米线阵列是大面积、填充率高和高度有序的; TEM的结果显示纳米线直径均匀、表面光滑且长径比大; HRTEM图片中清晰的晶格条纹和选区电子衍射(SAED)结果表明纳米线是单晶.     

Controllable synthesis and up-conversion properties of tetragonal BaYF5:Yb/Ln (Ln=Er, Tm, and Ho) nanocrystals

The nanocrystals (NCs) of tetragonal barium yttrium fluoride (BaYF(5)) doped 1 mol% Ln(3+) (Ln=Er, Tm, Ho) and 20 mol% Yb(3+) with different morphologies and sizes have been successfully synthesized through a facile hydrothermal method. The influences of pH values of the initial solution and fluorine sources on the final structure and morphology of the products have been well investigated. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and high-resolution transmission electron microscopy (HRTEM) were used to characterize the size, structure and morphology of these samples prepared at different conditions. And it is found that BaYF(5):Yb/Ln NCs prepared at pH value of 10 using NaBF(4) as F(-) source have a uniform spherical morphology with average diameter of 25 nm. Additionally, the up-conversion (UC) properties of Yb/Er, Yb/Tm, and Yb/Ho doped BaYF(5) nanoparticles were also discussed. Under 980 nm laser excitation, the BaYF(5):Yb/Er, BaYF(5):Yb/Tm, and BaYF(5):Yb/Ho NCs exhibit green, whitish blue, and yellow green UC luminescence, respectively. The luminescence mechanisms for the doped lanthanide ions were thoroughly analyzed.     

Core-shell structured SiO2@YVO4:Dy3+/Sm3+ phosphor particles: sol-gel preparation and characterization

Spherical SiO(2) particles have been coated with YVO(4):Dy(3+)/Sm(3+) phosphor layers by a Pechini sol-gel process, leading to the formation of core-shell structured SiO(2)@YVO(4):Dy(3+)/Sm(3+) particles. X-ray diffraction (XRD), Fourier-transform IR spectroscopy, field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), photoluminescence (PL) spectra as well as lifetimes were used to characterize the resulting SiO(2)@YVO(4):Dy(3+)/Sm(3+) core-shell phosphors. The obtained core-shell phosphors have perfect spherical shape with narrow size distribution (average size ca. 300 nm), smooth surface and non-agglomeration. The thickness of shells could be easily controlled by changing the number of deposition cycles (20 nm for one deposition cycle). The core-shell particles show strong characteristic emission from Dy(3+) for SiO(2)@YVO(4):Dy(3+) and from Sm(3+) for SiO(2)@YVO(4):Sm(3+) due to an efficient energy transfer from YVO(4) host to them. The PL intensity of Dy(3+) and Sm(3+) increases with raising the annealing temperature and the number of coating cycles.     

空心ZnMn2O4纳米球和纳米立方体的室温合成及氧还原催化性能

室温条件下,在含有Zn2+的溶液中,以空心结构的MnO2作为前驱体,使用NaBH4作为还原剂,合成了尖晶石型的ZnMn2O4纳米空心球和纳米空心立方体. 通过XRD,SEM,TEM,BET等测试手段对合成产物的结构、形貌、组成、表面性质进行了表征. 实验结果表明,所制备的空心结构ZnMn2O4纳米球和纳米立方体的尺寸在400?600 nm, 空心结构的壳层是由5?6 nm颗粒紧密堆积而形成,厚度约为40 nm. 将所制备的纳米ZnMn2O4空心结构应用于氧还原（ORR）反应中,研究了其在碱性溶液中的氧还原电催化性能,结果显示,相对于ZnMn2O4纳米空心立方体,ZnMn2O4纳米空心球在氧还原反应中表现出较大的电流密度和高的电子转移数 (n=3.5), 具有较好的氧还原电催化性能,有望成为一种新型的氧还原电极电催化剂.     

Controllable synthesis and luminescent properties of three-dimensional nanostructured CaWO4:Tb3+ microspheres

Three-dimensional (3D) nanostructured CaWO(4):Tb(3+)microspheres assembled by submicrospindles were synthesized via a mild sonochemical route from an aqueous solution of CaCl(2), TbCl(3) and Na(2)WO(4) with the aid of surfactant Polyglycol 600 (PEG-600). The crystal structure and morphology of the as-prepared products were characterized by using X-ray diffraction (XRD) and field emission scanning electron microscopy (FE-SEM). Rietveld refinement was carried out on the XRD data. The results showed that the CaWO(4):Tb(3+)nanoparticles can be formed without ultrasonic irradiation or addition of PEG-600. With continuously increasing irradiation time the submicrospindles and microspheres could be self-assembled. The central diameter and length of the submicrospindles are around 190 and 500 nm, respectively. The 3D CaWO(4):Tb(3+)nanostructured microspheres with diameter of 2-4 μm were assembled by the submicrospindles. A possible formation mechanism for the 3D-structured CaWO(4):Tb(3+)microspheres was proposed. The Photoluminescent (PL) properties of Tb(3+) ions in the nanostructured CaWO(4) microspheres were studied. The energy transfer processes in CaWO(4):Tb(3+)microspheres were analyzed. The electric dipole-dipole energy transfers related to (5)D(3) level were studied by inspecting the fluorescence decay of (5)D(3) level. The energy transfer critical distance was estimated.     

同轴静电纺丝技术制备Y_2O_3:Eu~(3+)@SiO_2豆角状纳米电缆与表征

采用同轴静电纺丝技术,以氧化钇、氧化铕、正硅酸乙酯(C8H20O4Si)、无水乙醇、PVP和DMF为原料,成功制备出大量的Y2O3:Eu3+@SiO2豆角状纳米电缆.用TG-DTA,XRD,SEM,TEM和荧光光谱等分析技术对样品进行了系统地表征.结果表明,得到的产物为Y2O3:Eu3+@SiO2豆角状纳米电缆,以无定型SiO2为壳层,晶态Y2O3:Eu3+球为芯,电缆直径约为200nm,内部球平均直径约150nm,壳层厚度约为25nm,电缆长度300μm.纳米电缆内部为球状结构,沿着纤维长度方向有序排列,形貌均一.Y2O3:Eu3+@SiO2豆角状纳米电缆在246nm紫外光激发下,发射出Eu3+离子特征的波长为614nm的明亮红光.对其形成机理进行了初步讨论.     

Monoclinic structured BiVO4 nanosheets: hydrothermal preparation, formation mechanism, and coloristic and photocatalytic properties

Bismuth vanadate (BiVO(4)) nanosheets have been hydrothermally synthesized in the presence of sodium dodecyl benzene sulfonate (SDBS) as a morphology-directing template. The nanosheets were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) equipped with an X-ray energy dispersive spectrometer (EDS), X-ray photoelectron spectroscopy (XPS), IR spectroscopy, transmission electron microscopy (TEM), and high-resolution TEM (HR-TEM). The BiVO(4) nanosheets had a monoclinic structure, were ca. 10-40 nm thick, and showed a preferred (010) surface orientation. The formation mechanism and the effects of reaction temperature and time on the products were investigated. UV-visible diffuse reflection spectra indicated that the BiVO(4) nanosheets had outstanding spectral selectivity and improved color properties compared with the corresponding bulk materials. Furthermore, the nanosheets showed good visible photocatalytic activities as determined by degradation of N,N,N',N'-tetraethylated rhodamine (RB) under solar irradiation.     

One-dimensional BiPO4 nanorods and two-dimensional BiOCl lamellae: fast low-temperature sonochemical synthesis,characterization, and growth mechanism

Regular BiPO4 nanorods, for the first time, and BiOCl lamellae have been successfully synthesized via a facile sonochemical method in a surfactant/ligand-free system under ambient air. The as-prepared products are characterized by XRD, TEM, SAED, FE-SEM, HRTEM, and Raman spectroscopy. The effects of pH and ultrasound irradiation on the phase and morphology of the products are studied and the sonochemical formation mechanisms of 1D and 2D structures are discussed. TEM data from samples made after different reaction times suggest an ultrasound-induced nucleation and an oriented-attachment growth mechanism.