Cl2+2HI=2HCl+I2反应机理的理论研究

分别在MP2/3-21G**、CCSD(T)/3-21G**//MP2/3-21G**和B3LYP/3-21G**3种水平上, 计算研究了气相反应Cl₂+2HI=2HCl+I₂的机理, 求得一系列四中心和三中心的过渡态. 通过比较六种反应通道的活化能大小, 得到了相同的结论：双分子基元反应Cl₂+HIHCl+ICl和ICl+HII₂+HCl的最小活化能小于Cl₂、HI和ICl的解离能, 从理论上证明了反应Cl₂+2HI=2HCl+I₂将优先以分子与分子作用形式分两步完成. 用内禀反应坐标(IRC)验证了MP2/3-21G**方法计算得到的过渡态.     

2-乙酰吡啶吖嗪及其与Co2+、Ni2+、Fe3+、Zn2+配合物的合成和生物活性

过渡金属;超氧离子;白血病;肺癌;2-乙酰吡啶吖嗪及其与Co2+、Ni2+、Fe3+、Zn2+配合物的合成和生物活性     

水杨酸修饰聚苯乙烯对Pb2+和Cu2+的吸附

水杨酸;聚苯乙烯;吸附;Pb2+;Cu2+     

Co2+、Zn2+、Cd2+的阴离子交换色谱法分离研究

本文对钴与锌、镉等金属离子的阴离子交换色谱法分离进行了研究．采用201×7型阴离子交换树脂经氧化铵溶液饱和后,在pH＝4．0时,使钴与其它金属离子分离,然后分别用0．02mol／L的盐酸溶液及蒸馏水将锌、镉等金属离子从阴离子交换树脂上洗脱．此法分离效果好,操作简单方便．     

Cd2+和Ni2+在粉煤灰上的吸附特性

考察了粉煤灰对Cd2+和Ni2+的单组分吸附和双组分吸附性能。结果表明,粉煤灰可有效吸附水溶液中的Cd2+和Ni2+,去除率随pH升高而增加。吸附约60min后趋于平衡。粉煤灰对Ni2+的吸附容量高于Cd2+。单组分吸附平衡符合Freundlich模型和Redlich Peterson (R P)模型。双组分吸附时,Ni2+和Cd2+之间存在明显的竞争吸附效应;随干扰离子浓度升高,竞争吸附效应增强。不同模型拟合结果表明,双组分吸附平衡符合Freundlich竞争吸附模型。脱附实验表明,Cd2+比Ni2+易于脱附;0.1mol/L HCl、0.1mol/L HNO3 和0.05mol/L H2SO4的脱附效果接近,对Cd2+脱附率>60%,对Ni2+脱附率>35%。     

Cl_2+2HBr=2HCl+ Br_2反应的机理和应用

用密度泛函理论（ＤＦＴ）Ｂ３ＬＹＰ方法,取６－３１１ Ｇ**基组,细致研究了反应Ｃｌ２＋ ２ＨＢｒ＝ 2ＨＣｌ＋ Ｂｒ２的机理,求得一系列四中心和三中心过渡态．双分子基元反应 Ｃｌ２＋ ＨＢｒ→ ＨＣｌ＋ ＢｒＣｌ和 ＢｒＣｌ＋ ＨＢｒ → Ｂｒ２＋ ＨＣｌ的活化能（１３８．９６和 １４７．２４ ｋＪ· ｍｏｌ－１）小 于Ｃｌ-２,ＨＢｒ和ＢｒＣｌ的解离能,从理论上证明了标题反应将优先以分子与分子作用形式 完成．将其应用于从ＨＢｒ中回收溴,以Ｃｌ２直接与ＨＢｒ气体反应,生成的含溴混合气体, 经冷凝并以四氯化碳吸收分离得到液溴和盐酸;溴的回收率大于９６％,其含氟量小于 ３．０％．提供了运用基础理论解决生产中难题的成功例证．     

Cl2+2HBr=2HCl+Br2反应的机理和应用

用密度泛函理论(DFT)B3LYP方法,取6-311G**基组,细致研究了反应Cl2+2HBr= 2HCl+Br2的机理,求得一系列四中心和三中心过渡态.双分子基元反应Cl₂+HBr®HCl+ BrCl和BrCl+HBr®Br₂+HCl的活化能(138.96和147.24 kJ· mol-1)小于Cl₂,HBr和BrCl的解离能,从理论上证明了标题反应将优先以分子与分子作用形式完成.将其应用于从HBr中回收溴,以Cl₂直接与HBr气体反应,生成的含溴混合气体,经冷凝并以四氯化碳吸收分离得到液溴和盐酸;溴的回收率大于96%,其含氯量小于3.0%.提供了运用基础理论解决生产中难题的成功例证.     

PEI/SiO2复合材料对Zn2+、Cd2+的螯合吸附性能研究

采用螯合电导滴定法研究了聚乙烯亚胺(PEI)与Zn2 、Cd2 的配合过程,提出了PEI与各种金属离子所形成螯合物的可能结构;通过γ-氯丙基三甲氧基硅烷媒介,将PEI偶联接枝在硅胶微粒表面,制备了复合型螯合吸附材料PEI/SiO2;研究了PEI/SiO2对Zn2 、Cd2 等重金属离子的吸附性能。结果表明,水溶性聚胺PEI与Zn2 、Cd2 等离子都能定量地形成四配位的水溶性螯合物,且配合过程速度较快;PEI/SiO2复合型螯合吸附材料对Zn2 、Cd2 都具有强的螯合吸附能力;等温吸附数据符合Langmuir方程,且吸附容量随温度升高而增大;pH对吸附过程有很大的影响,pH=7时,吸附容量最高。     

F~2+2HCl→2HF+Cl~2反应机理的密度泛函理论研究

用密度泛函理论(DFT)B3LYP方法,在6-311G^*^*基组下,计算研究了反应F~2+2HCl→2HF+Cl~2的机理。求得各可能反应途径的系列过渡态,并通过振动分析和内禀反应坐标(IRC)分析加以证实。比较反应能垒(理论计算活化能)发现,标题反应若以分子与分子作用机理进行,则需克服的最大能垒为150.63kJ.mol^-^1;若以F~2分子先裂解为F原子再反应的机理进行,则需越过能垒154.82kJ.mol^-^1,求得反应F+HCl→HF+Cl的线形和三角形两种过渡态,以三角形较稳定;求得反应HCl+Cl→H+Cl~2的两种过渡态,以线形较稳定。     

Ga2S3∶Eu2+和SrGa2+xS4+y∶Eu2+系列荧光粉的发光性能研究

采用高温固相法合成了Ga2S3∶Eu2+和SrGa2S4∶Eu2+系列荧光粉. 发现Ga2S3∶Eu2+的发射峰位于570 nm附近, SrGa2S4∶Eu2+的发射峰位于535 nm附近. 同时进一步探讨了SrGa2+xS4+y∶Eu2+体系中, 过量的Ga对发光的影响, 通过漫反射光谱和XRD谱确定过量的Ga是以Ga2S3的形式存在于SrGa2S4相中; 通过荧光光谱发现过量的Ga并不引起SrGa2S4∶Eu2+发射峰的位移, 而是增强其在400～520 nm处激发峰的强度, 从而增强Eu2+在535 nm处的发光强度.     

Solid-supported [2+2+2] cyclotrimerizations

The transition-metal-catalyzed [2+2+2] cyclotrimerization of a diyne and an alkyne provides a convergent route to highly-substituted aromatic rings. This reaction possesses distinct drawbacks, especially low chemo- and regioselectivities, which hamper its application in combinatorial synthesis. These problems have been solved by the development of solid-supported [2+2+2]-cycloaddition reactions. If conducted on a solid-support, this reaction enables rapid combinatorial access to diverse sets of carbo- and heterocyclic small-molecule arrays. The scope of this methodology has been investigated by examining different immobilization strategies, different diyne precursors, and a variety of functionalized alkyne reaction partners. Overall, isoindoline, phthalan, and indan libraries were assembled in good to excellent yields and with high purities.     

A photoionization study of the charge transfer reactions: Xe+ + O2 → O+2 + Xe and O+2 + Xe → Xe+ + O2

Photoionization mass spectrometer techniques have been employed to study the charge transfer reactions: Xe⁺ + O₂ → O⁺₂ + Xe and O⁺₂ + Xe → Xe⁺ + O₂. The results show the reaction of Xe⁺(²P_{$\text{3}\text{2}$}) ions with O₂ molecules is much more efficient than the reaction of Xe⁺(²P_{$\text{1}\text{2}$}) ions with O₂ molecules. The charge transfer reaction of O⁺₂ ions with Xe atoms was detected for O⁺₂ ions in the a ⁴Π_u state.     

Tethered 2 + 2 + 2 cycloaddition reactions of cobalt-cycloheptyne complexes

Cycloheptyne-dicobalt hexacarbonyl complexes, substituted by propargylic ether functions, undergo 2 + 2 + 2 cycloaddition reactions with alkynes to give tricyclic benzocycloheptanes; an all-intramolecular version of this transformation is also possible.     

Intracellular Ruthenium-Promoted (2+2+2) Cycloadditions

Metal-mediated intracellular reactions are becoming invaluable tools in chemical and cell biology, and hold promise for strongly impacting the field of biomedicine. Most of the reactions reported so far involve either uncaging or redox processes. Demonstrated here for the first time is the viability of performing multicomponent alkyne cycloaromatizations inside live mammalian cells using ruthenium catalysts. Both fully intramolecular and intermolecular cycloadditions of diynes with alkynes are feasible, the latter providing an intracellular synthesis of appealing anthraquinones. The power of the approach is further demonstrated by generating anthraquinone AIEgens (AIE=aggregation induced emission) that otherwise do not go inside cells, and by modifying the intracellular distribution of the products by simply varying the type of ruthenium complex.     

Alkenes in [2+2+2] Cycloadditions

Participation of alkenes and allenes in [2+2+2] cycloaddition reactions has attracted much attention recently. This version of the well‐established alkyne cyclotrimerization renders interesting products, such as cyclohexadienes and other polycycles, through cascade processes. Many mechanistic variations are observed when using certain metal complexes as catalysts. The frequent generation of stereogenic centers has prompted the development of efficient asymmetric versions. This Minireview summarizes the efforts reported to date on the use of double bonds as partners in [2+2+2] cyclotrimerizations.     

NHC-catalyzed enantioselective [2 + 2] and [2 + 2 + 2] cycloadditions of ketenes with isothiocyanates

The enantioselective N-heterocyclic carbene-catalyzed formal [2 + 2] and [2 + 2 + 2] cycloaddition of ketenes and isothiocyanates were developed. Reaction with N-aryl isothiocyanates at room temperature favors the [2 + 2] cycloaddition, while reaction with N-benzoyl isothiocyanates at -40 °C favors the [2 + 2 + 2] cycloaddition.     

Rhodium‐Catalyzed [3+2+2] and [2+2+2] Cycloadditions of Two Alkynes with Cyclopropylideneacetamides

It has been established that a cationic rhodium(I)/H₈‐binap complex catalyzes the [3+2+2] cycloaddition of 1,6‐diynes with cyclopropylideneacetamides to produce cycloheptadiene derivatives through cleavage of cyclopropane rings. In contrast, a cationic rhodium(I)/(S)‐binap complex catalyzes the enantioselective [2+2+2] cycloaddition of terminal alkynes, acetylenedicarboxylates, and cyclopropylideneacetamides to produce spiro‐cyclohexadiene derivatives which retain the cyclopropane rings.     

Studies on Synthetic Inorganic Ion Exchangers-III Quantitative Separations of Mg2+ -Pb2+, Zn2+ - Pb2+ Cu2+ - Pb2+, Al3+ - Pb2+, Zn2+ - Cd2+, and Mg2+ - Cd2+ on Lead Antimonate Columns

Abstract

A new inorganic ion exchanger, lead antimonate has been synthesized having an Pb:Sb ratio of 1:5 and cation exchange capacity of 1.46 mequiv./g. It is fairly stable in water and dilute solutions of acids, bases and salts. Ion distribution studies on twenty metal ions have been determined on this gel at pH 1,2,3 and 5. The following mixtures have been separated: Mg²⁺ - Pb²⁺, Zn²⁺ - Pb²⁺, Zn²⁺ - Pb²⁺, Cu²⁺ - Pb²⁺, Al³⁺ - Pb²⁺, Zn²⁺ - Cd²⁺ and Mg²⁺ - Cd²⁺. Mg²⁺ and Al³⁺ were removed with 0.4 M ammonium nitrate, Cu²⁺ and Zn²⁺ with 0.4 M ammonium nitrate + 0.1M nitric acid (1:1), Pb²⁺ with 0.5M nitric acid and Cd²⁺ with 0.25M nitric acid. A tentative structure of this material is proposed on the basis of chemical analysis, pH titrations, thermogravimetry and IR spectrophotometry.