2,2′:3′,2′′‐Terthiophene‐Based all‐Thiophene Dendrons and Dendrimers: Synthesis,Structural Characterization,and Properties

The synthesis of generational dendritic oligothiophenes (DOTs) has been successfully achieved by a divergent/convergent approach that involves halogenation, boronation, and palladium‐catalyzed Suzuki coupling reactions. The key point in the presented synthetic approach is the use of trimethylsilyl (TMS) protecting groups, which allow for the core‐lithiation and subsequent boronation of the dendrons and for the peripheral ipso‐substitution with iodine monochloride or N‐bromosuccimide. In addition, the TMS protecting groups can be completely removed by using tetrabutylammonium fluoride, thus yielding only‐thiophene‐based dendrons and dendrimers. Due to their highly branched structure, all these synthesized DOTs are soluble in organic solvents. Chemical structures were confirmed by NMR spectroscopic, mass spectrometric, and elemental analysis. Concentration‐dependent ¹H NMR spectroscopic investigations revealed that the higher generation compounds tend to aggregate in solution. Such an aggregation behavior was further confirmed by measuring with MALDI‐TOF MS. Both MALDI‐TOF MS and gel‐permeation chromatography (GPC) analyses confirmed the monodispersity of the DOTs. Furthermore, GPC results revealed that these DOT molecules adopt a condensed globular molecular shape. Their optical and electronic properties were also investigated. The results indicated that these DOTs comprise various conjugated α‐oligothiophenes with different chain lengths, which results in the higher generation compounds showing broad and featureless UV/Vis absorption spectra and ill‐defined redox waves.     

Stereoselective 1,3-dipolar cycloadditions of a chiral nitrone derived from erythrulose. An experimental and DFT theoretical study

We have investigated several 1,3-dipolar cycloadditions of a chiral nitrone prepared from L-erythrulose. While cycloadditions to carbon-carbon multiple bonds of dipolarophiles such as ethyl acrylate, ethyl propiolate, or dimethyl acetylenedicarboxylate were poorly stereoselective, reaction with acrylonitrile provided predominantly one diastereomeric adduct. Furthermore, the regioselectivity exhibited by the two structurally similar dipolarophiles ethyl acrylate and ethyl propiolate was found to be opposite. The molecular mechanisms of these cycloadditions have thus been investigated by means of density functional theory (DFT) methods with the B3LYP functional and the 6-31G and 6-31+G basis sets. A simplified achiral version of nitrone 1 as the dipole, and methyl propiolate or acrylonitrile as the dipolarophiles, were chosen as computational models. The cycloadditions have been shown to take place through one-step pathways in which the C-C and C-O sigma bonds are formed in a nonsynchronous way. For the reaction with methyl propiolate, DFT calculations predict the experimentally observed meta regioselectivity. For the reaction with acrylonitrile, however, the predicted regioselectivity has been found to depend on the computational level used. The calculations further indicate the exo approach to be energetically favored in the case of the latter dipolarophile, in agreement with experimental findings. The main reason for this is the steric repulsion between the nitrile function and one of the methyl groups on the nitrone that progressively develops in the alternative endo approach.     

Directed ortho-metalation-cross-coupling strategies. One-pot Suzuki reaction to biaryl and heterobiaryl sulfonamides

A general synthesis of stable ortho-boropinacolato aryl and heteroaryl sulfonamides by directed ortho-metalation (DoM) and either MeOBPin or i-PrOBpin electrophile quench, 3 → 4, is described. A one-pot metalation-Suzuki cross-coupling procedure for the synthesis of biaryls and heterobiaryls, 3 → 5, and a complementary DoM-Ir-catalyzed boronation sequence (Scheme 6 ) are delineated.     

Iterative asymmetric allylic substitutions: syn- and anti-1,2-diols through catalyst control

A copper-catalyzed asymmetric allylic boronation (AAB) gives access to syn- and anti-1,2-diols. The method facilitates an iterative strategy for the preparation of polyols, such as the fully differentiated L-ribo-tetrol and protected D-arabino-tetrol. P=protecting group.     

Controlled synthesis of polyacrylonitrile via reversible addition-fragmentation chain-transfer pseudoliving radical polymerization and its thermal behavior

The polymerization of acrylonitrile mediated by various trithiocarbonates as reversible addition-fragmentation chain-transfer agents is studied. It is shown that, when polymerization is performed in DMSO, a narrowly dispersed PAN with a controlled molecular mass can be prepared. The pseudoliving radical polymerization of acrylonitrile is conducted for the first time via the reversible addition-fragmentation chaintransfer mechanism in carbon dioxide at an increased pressure. The structure of the polymers is investigated via NMR and IR spectroscopy. As shown by DSC and IR pyrolysis, the thermal behavior of PAN is determined by its molecular mass, the width of the molecular-mass distribution, and the conditions of synthesis. The incorporation of functional groups of the reversible addition-fragmentation chain-transfer agent into a macromolecule changes the structure of the polyconjugated system and makes it possible to control the conditions of its formation.     

Synthesis of allylsilanes and dienylsilanes by a one-pot catalytic C-H borylation--Suzuki-Miyaura coupling sequence

Allylsilane and various vinyl substrates undergo selective C-H bond functionalization based boronation reactions using iridium catalysis. The products were further reacted with aryl and vinyl halogenides in a one-pot sequence. This method is suitable for regio- and stereoselective synthesis of various allylsilanes and dienylsilanes.     

Morphology of Nylon-6 blends with styrenic polymers

The morphology of blends of styrenic polymers in a matrix of 75% Nylon-6 prepared in a Brabender Plasti-Corder was examined by scanning electron microscopy. Styrene/acrylonitrile copolymers (SAN) form smaller particles as the AN level increases owing to the corresponding decrease in the SAN–polyamide interfacial tension. Various styrenic polymers containing functional groups, maleic anhydride or oxazoline type, that can react with Nylon-6 during melt processing were added to the SAN phase which also led to a decrease in the particle size owing to the graft copolymer formed in situ. The effects of functional group type, amount of functional groups per chain, amount of functional polymer added, and the miscibility of the styrene/maleic anhydride (SMA) and SAN copolymers on the morphology of the styrenic phase in the Nylon-6 matrix are described. © 1992 John Wiley & Sons, Inc.     

Electrostatic interactions between substituents as regioselectivity control elements in Diels-Alder cycloadditions. A DFT study of cycloadditions of 1-methoxy-4-trimethylsiloxy dienes with acrylonitrile

The regioselectivities of Diels-Alder reactions of 1-methoxy-4-trimethylsiloxy-1,3-butadiene and the corresponding o-xylylene with acrylonitrile were explored with density functional theory. The transition state of the reaction of the diene with acrylonitrile was studied in both the gas phase and in a low dielectric (epsilon = 2.247) solvent. The regioselectivities of these reactions are predicted to be controlled by the direct electrostatic interactions between the diene and dienophile substituents. The electron-donating capacities of methoxy and trimethylsiloxy substituents are shown to be very similar and to not contribute to regioselectivity control. A prediction is made that the cycloadditions of the o-xylylene will be unselective, while 1-methoxy-4-trimethylsiloxy-1,3-butadiene will give a small preference ( approximately 5:1) in favor of the proximal methoxy and cyano groups. The thermochromic behavior of trans-disubstituted disiloxy benzocyclobutene was also explored.     

Synthesis of cyanoethyl chitosan derivatives

Cyanoethyl chitosan derivatives with various substitution degrees have been synthesized by the nucleophilic addition of acrylonitrile to the functional groups of chitosan. The process proceeds under homogeneous conditions without any catalyst at various pH values and reagent concentrations in the temperature range of 273–333 K. The formation of cyanoethyl chitosans is established by a gain in the weight of chitosan, a change in its content of nitrogen, and the appearance of an absorption band at 2250 cm^?1 in the IR spectrum which corresponds to the stretching vibrations of a-C≡N group. It has been shown that the most efficient addition of acrylonitrile occurs at 273 K and pH 5.5. Cyanoethyl chitosan samples show better mechanical parameters and are characterized by a lower ordering than the parent chitosan.     

Mechanistic and Synthetic Aspects of Atom Transfer Radical Polymerization

Abstract

Mechanistic and synthetic aspects of atom transfer radical polymerization (ATRP) are reviewed. This controlled/“living” system polymerizes many monomers including styrenes, (meth)acrylates, acrylonitrile and dienes. The halogen end groups can be converted to other functional groups such as amines and azides. In addition to producing well-defined linear homopolymers, statistical copolymers, block copolymers, and gradient copolymers, ATRP can be used to synthesize graft and hyperbranched copolymers through copolymerization with functionalized monomers. Selection of appropriate conditions for ATRP depends on targeted molecular weight and degree of polymer chain end-functionality and includes considering the monomer(s) to be polymerized, initiator structure/reactivity, amount of catalyst/deactivator used, halogen end-group used, and temperature.     

Density-functional study of the cycloaddition of acrylonitrile on the Si(100) surface

Using a density functional approach, we have explored the cycloaddition of acrylonitrile on the Si(100) surface. The buckling of the surface dimers characteristic for the (2x1) reconstructed surface is shown to favor structures with a dipolar moment such as the resonant form of acrylonitrile with cumulative double bonds. The bond of acrylonitrile via a single C atom is a possible intermediate leading to the nitrile structure of the adsorbed molecule.     

Synthesis of functional polyolefins using cationic bisphosphine monoxide-palladium complexes

The copolymerization of ethylene with polar vinyl monomers, such as vinyl acetate, acrylonitrile, vinyl ethers, and allyl monomers, was accomplished using cationic palladium complexes ligated by a bisphosphine monoxide (BPMO). The copolymers formed by these catalysts have highly linear microstructures and a random distribution of polar functional groups throughout the polymer chain. Our data demonstrate that cationic palladium complexes can exhibit good activity for polymerizations of polar monomers, in contrast to cationic α-diimine palladium complexes (Brookhart-type) that are not applicable to industrially relevant polar monomers beyond acrylates. Additionally, the studies reported here point out that phosphine-sulfonate ligated palladium complexes are no longer the singular family of catalysts that can promote the reaction of ethylene with many polar vinyl monomers to form linear functional polyolefins.     

聚苯乙烯微球表面接枝丙烯腈的研究

采用分散聚合法制备出平均粒径为3.85 μm的窄分布聚苯乙烯微球， 并在此基础上引入第二单体丙烯腈进行共聚反应， 制备出平均粒径为4.02 μm的窄分布苯乙烯-丙烯腈共聚物微球. 对聚苯乙烯微球和苯乙烯-丙烯腈共聚物微球进行了形貌及粒径、红外光谱、差示扫描量热法(DSC)分析， 结果表明丙烯腈基团均匀分布在聚苯乙烯微球表面， 提高了聚苯乙烯微球表面的极性.     

Transformations of polymers and copolymers of acrylonitrile during heterogeneous saponification

The kinetic and thermodynamic specific features of the process of heterogeneous alkaline saponification of the copolymer of acrylonitrile (92.2%), methyl acrylate (6.3%), and sodium monoithaconate (1.5%) were investigated. Chemical and infrared spectroscopic methods reveal that the saponification of the nitrile groups of copolymer of acrylonitrile proceeds faster to yield amide groups and then slower to yield carboxylate groups. The order of both stages of the process with respect to the accumulation of the respective groups was evaluated. The dependence of the rate of saponification on the packing density of the structural units was demonstrated. With increasing conversion, the fiber structure becomes looser, as demonstrated by density and sorption investigations. If acrylonitrile copolymer is treated with alkali, the carboxylate groups in the polymer substrate accumulate as a result of saponification of the ester groups of the copolymer, while the nitrile groups are predominantly transformed into the amide groups. If the degree of conversion (with respect to the CN groups) is higher than 62.7%, the copolymer abruptly suffers a marked change in its mechanical properties and gradually dissolves. The products of partial saponification of copolymer were investigated by thermomechanical methods and DTA. The polycyclization of the polymer substrate was found to proceed at a temperatures which decreases as the content of the amide groups increases.     

Specific interaction governing the melt intercalation of clay with poly(styrene‐co‐acrylonitrile) copolymers

In the melt intercalation of cation‐exchange clay, mixtures of montmorillonite and poly(styrene‐co‐acrylonitrile) (SAN) with various acrylonitrile contents were studied to examine the effect of specific interaction. When organic molecules with hydroxyl groups were used as intercalants for the clay, the amount of SAN penetrating the gallery of the layered structure of the clay and the corresponding increase in the gallery height occurred at a much higher rate because of the attractive specific interaction between acrylonitrile groups and polar groups on the clay surface. However, there was a limit to the increase in the gallery height, and the tendency for the gallery height to increase with the acrylonitrile group content disappeared when the acrylonitrile content was greater than 30 wt %, implying that excessive attractive interaction on the clay surfaces and polymer molecules glued the two adjacent silicate layers together; consequently, the increase in the gallery height could not be accomplished. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2430–2435, 2001     

Total synthesis of Hirtellanine A

The first total synthesis of hirtellanines A is described. The key transformations include (i) base-mediated regioselective pyran ring formation, (ii) one-pot sequential boronation and Suzuki-Miyaura cross-coupling, and (iii) a tandem acid-induced deprotection and subsequent tautomerizations.     

An experimental Raman and theoretical DFT study on the self-association of acrylonitrile

The liquid structure of acrylonitrile (propenenitrile) has been investigated using Raman spectroscopy and density functional theory (DFT) ab initio calculations with the 6-311++G** basis set. Two different and complementary experimental approaches were undertaken: FT-Raman spectra of 13 acrylonitrile solutions in carbon tetrachloride (concentration range=0.25-12.0 mol.L-1) were studied in detail including principal component analysis (PCA) of the CN stretching band. Furthermore, dispersive Raman spectra of neat acrylonitrile were obtained at eight different temperatures from 238 up to 343 K. The complex and asymmetric acrylonitrile Raman CN stretching band can be decomposed into two components attributed to monomeric and self-associated forms. Ab initio results fully support this assignment and suggest that the self-associated complex is a nonplanar trimer held together by dipole-dipole interactions. At ambient temperature, the composition of acrylonitrile can be expressed as a mixture of 25% monomers and 75% trimers. Close to the boiling point, trimers still represent 65% of the liquid composition. The corresponding enthalpy of association was estimated to be -22+/-2 kJ.mol-1.     

Palladium-catalyzed intramolecular C-O bond formation.

A number of oxygen heterocycles were synthesized using the palladium-catalyzed intramolecular etherification of aryl halides by employing di-tert-butylphosphinobiaryl ligands. The reaction proceeds under mild conditions using weak bases such as Cs(2)CO(3) or K(3)PO(4). A variety of functional groups are tolerated in the reaction, and enantioenriched alcohols can be coupled without erosion of optical purity. The mildness of the reaction conditions allows for the use of polyfunctionalized substrates. This method was used as the key step in the synthesis of MKC-242, an antidepressant currently in clinical trials. The synthesis of MKC-242 was achieved in 40% overall yield from commercially available sesamol and acrylonitrile.     

Synthesis,optical, and spectroscopic characterisation of substituted 3-phenyl-2-arylacrylonitriles

The Knoevenagel condensation between aldehydes and substrates with active methylene groups was applied to synthesise a series of 3-(4-substituted phenyl)-2-arylacrylonitriles (aryl = phenyl or pyridyl). Chloro-, fluoro-, or dimethylamino-substituted aryls and a cyano group attached to the double bond of acrylonitrile were studied. Previous studies showed that the condensation products were E isomers. The compounds synthesised were: 3-(4-chlorophenyl)-2-phenylacrylonitrile, 3-(4-chlorophenyl)-2-(pyridin-2-yl)acrylonitrile, 3-(4-chlorophenyl)-2-(pyridin-3-yl)acrylonitrile, 3-(4-chlorophenyl)-2-(pyridin-4-yl)acrylonitrile, 3-(4-fluorophenyl)-2-phenylacrylonitrile, 3-(4-fluorophenyl)-2-(pyridin-2-yl)acrylonitrile, 3-(4-fluorophenyl)-2-(pyridin-3-yl)acrylonitrile, 3-(4-fluorophenyl)-2-(pyridin-4-yl)acrylonitrile, 3-(4-dimethylaminophenyl)-2-phenylacrylonitrile, 3-(4-dimethylaminophenyl)-2-(pyridin-2-yl)acrylonitrile, 3-(4-dimethylaminophenyl)-2-(pyridin-3-yl)acrylonitrile, and 3-(4-dimethylaminophenyl)-2-(pyridin-4-yl)acrylonitrile. Structures were confirmed by IR, MS, and NMR spectral data. Molar absorption coefficient, absorbance, and fluorescence emission spectra were compared in order to evaluate the effects of substituents on phenyl and the position of nitrogen in pyridine moiety on the electronic properties of acrylonitrile derivatives prepared.     

新型菲并嗪类有机光伏材料的合成

以菲醌和邻位二胺为核心原料,经烷基化、硼化、Suzuki偶联、还原和关环反应合成了新型菲并嗪类有机光伏材料DTPZ,其结构经¹H NMR, ¹³C NMR, MALDI-TOF-MS和元素分析表征。