聚乙烯吡咯烷酮对Pt/Ru双金属纳米簇的结构和催化性能影响

以乙二醇为还原剂,通过微波热辐射制备得到稳定的Pt/Ru双金属胶体纳米簇,各颗粒粒径在1~2nm范围。考察了聚合物聚乙烯吡咯烷酮（PVP）对Pt/Ru双金属纳米簇表面原子组成及催化性能的影响。结果表明,PVP与金属前体之间的不同相互作用影响Pt/Ru双金属纳米簇的形成。在Pt/Ru双金属纳米簇形成之前加入PVP,Pt原子更容易富集在双金属表面,有利于增加Pt在催化反应中的作用。在PVP稳定的Pt/Ru双金属纳米簇中,除了零价态的Pt、Ru单质外,还存在氧化态的Pt化合物,归因于PVP与Pt前体的相互作用。在环己烯加氢反应中,PVP-Pt/Ru双金属纳米簇显示出比单金属纳米簇更优越的催化性能。     

聚乙烯吡咯烷酮对Pt/Ru双金属纳米簇的结构和催化性能影响

以乙二醇为还原剂,通过微波热辐射制备得到稳定的Pt/Ru双金属胶体纳米簇,各颗粒粒径在1~2 nm范围。考察了聚合物聚乙烯吡咯烷酮(PVP)对Pt/Ru双金属纳米簇表面原子组成及催化性能的影响。结果表明,PVP与金属前体之间的不同相互作用影响Pt/Ru双金属纳米簇的形成。在Pt/Ru双金属纳米簇形成之前加入PVP,Pt原子更容易富集在双金属表面,有利于增加Pt在催化反应中的作用。在PVP稳定的Pt/Ru双金属纳米簇中,除了零价态的Pt、Ru单质外,还存在氧化态的Pt化合物,归因于PVP与Pt前体的相互作用。在环己烯加氢反应中,PVP-Pt/Ru双金属纳米簇显示出比单金属纳米簇更优越的催化性能。     

贵金属催化p-叔丁基-α-甲基肉桂醛加氢

采用傅里叶变换红外光谱仪(FT-IR)、N₂吸脱附、X射线衍射(XRD)、透射电子显微镜(TEM)揭示了微波辅助-KOH处理对活性炭的物理化学性能的影响规律。 结果表明,活性炭表面的含氧基团的种类增加,微孔明显减少,中大孔的比例增大。 通过浸渍-原位还原方法制备了Pt、Pd、Ru、Rh负载微波辅助-KOH处理活性炭催化剂,并对其催化p-叔丁基-α-甲基肉桂醛选择性加氢性能进行了研究。 发现Pt具有优异的C=O加氢选择性,而Pd具有优良的C=C加氢选择性。 进一步研究了Pd-Pt双组分催化剂催化p-叔丁基-α-甲基肉桂醛加氢产物分布,随着Pt含量的增加, C=O选择性逐步提高, C=C选择性逐渐下降,且当m(Pd)∶m(Pt)=4∶1时,其催化剂的催化性能最佳。     

Synthesis of Pt/Ru bimetallic nanoparticles in high-temperature and high-pressure fluids

A high-temperature and high-pressure flow-reactor system was applied to the synthesis of monometallic ruthenium (Ru) nanoparticles and platinum/ruthenium (Pt/Ru) bimetallic nanoparticles using the thermal reduction of ruthenium ion (Ru(III)) and the mixture of platinum (Pt(IV)) and ruthenium ions in water and ethanol mixture in the presence of poly(N-vinyl-2-pyrrolidone). Monometallic Ru nanoparticles with an average diameter of ca. 2 nm were synthesized above 200 degrees C at 30 MPa. The monometallic Ru nanoparticles tended to make large aggregates in colloidal dispersions. By the reduction of the mixture solution of Pt(IV) and Ru(III) in water and ethanol above 200 degrees C at 30 MPa, Pt/Ru bimetallic nanoparticles with an average diameter of ca. 2.5 nm were synthesized with relatively small size distribution. The EXAFS spectra for the Pt/Ru bimetallic particles indicated that the particle possesses metallic bonds between Pt and Ru atoms in contrast to the case of the nanoparticles produced by thermal reduction under ambient pressure at 100 degrees C [M. Harada, N. Toshima, K. Yoshida, S. Isoda, J. Colloid Interface Sci. 283 (2005) 64], and that the Pt/Ru bimetallic particle has a Pt-core/Ru-shell structure.     

MIL-100(Fe) Supported Pt−Co Nanoparticles as Active and Selective Heterogeneous Catalysts for Hydrogenation of 1,3-Butadiene

Superior catalytic performance for selective 1,3-butadiene (1,3-BD) hydrogenation can usually be achieved with supported bimetallic catalysts. In this work, Pt−Co nanoparticles and Pt nanoparticles supported on metal–organic framework MIL-100(Fe) catalysts (MIL=Materials of Institut Lavoisier, PtCo/MIL-100(Fe) and Pt/MIL-100(Fe)) were synthesized via a simple impregnation reduction method, and their catalytic performance was investigated for the hydrogenation of 1,3-BD. Pt1Co1/MIL-100(Fe) presented better catalytic performance than Pt/MIL-100(Fe), with significantly enhanced total butene selectivity. Moreover, the secondary hydrogenation of butenes was effectively inhibited after doping with Co. The Pt1Co1/MIL-100(Fe) catalyst displayed good stability in the 1,3-BD hydrogenation reaction. No significant catalyst deactivation was observed during 9 h of hydrogenation, but its catalytic activity gradually reduces for the next 17 h. Carbon deposition on Pt1Co1/MIL-100(Fe) is the reason for its deactivation in 1,3-BD hydrogenation reaction. The spent Pt1Co1/MIL-100(Fe) catalyst could be regenerated at 200 °C, and regenerated catalysts displayed the similar 1,3-BD conversion and butene selectivity with fresh catalysts. Moreover, the rate-determining step of this reaction was hydrogen dissociation. The outstanding activity and total butene selectivity of the Pt1Co1/MIL-100(Fe) catalyst illustrate that Pt−Co bimetallic catalysts are an ideal alternative for replacing mono-noble-metal-based catalysts in selective 1,3-BD hydrogenation reactions.     

水溶性含钌-铂双金属催化剂催化卤代芳香硝基化合物选择性加氢

考察了水溶性Ru/Pt-TPPTS双金属催化剂催化卤代芳香硝基化合物的加氢性能.实验结果表明,在Ru-TPPTS中添加铂或钯后,反应活性明显提高,尤其是Ru/Pt-TPPTS双金属催化剂更表现出显著的双金属协同效应.在pH₂=1.0MPa,70℃,反应2h的条件下,双金属催化剂0.50Ru/0.50Pt-TPPTS催化对-氯硝基苯加氢生成对-氯苯胺的反应转化率达到100%.对于取代基和取代位置不同的一些卤代硝基苯加氢,该双金属催化剂也表现出很高的催化活性和生成卤代苯胺的选择性,脱卤反应的程度很小.     

Pt-Ru合金薄膜的电沉积制备及其电化学表面增强红外吸收光谱

在1mmol·L-1H2PtCl6+1mmol·L-1RuCl3+0.1mol·L-1H2SO4镀液中采用电沉积法在化学镀金膜的红外窗口Si反射面上制备Pt50Ru50合金电极.利用原子力显微镜(AFM)可以观察到制备的Pt50Ru50合金电极形貌呈现出100-200nm大小的颗粒.常规电化学分析方法得出该电极具有典型的合金特征,对CO和CH3OH具有很好的催化氧化作用.应用电化学现场衰减全反射表面增强红外光谱法(ATR-SEIRAS)可以观察到该电极上Pt位和Ru位上CO的振动谱峰,且表现出Pt-Ru二元金属良好的协同催化性能.     

A strategy for synthesis of polymer-protective bimetallic colloids

A strategy for the synthesis of polymer-protective bimetallic sols is proposed which has the advantage of the strong protective effect of the polymer agent on one of the composites to stabilize the bimetallic colloidal particles. This strategy is certified to be useful to the predication of the formation of stable bimetallic colloids protected by polymer and to the control of the particle size to a certain extent. A series of new PVP-protective bimetallic colloidal dispersions containing noble metal element (Pt, Rh, Pd), light transition metal element (Co, Fe), and boron are obtained from the corresponding salts by the methods of reduction by stage and coreduction, using the NaBH4 as reductant. The TEM, XRD and EPMA measurements indicate the formation of bimetallic colloids. An interesting kind of coil aggregation is observed in the systems of PVP-Pt-Co and PVP-Rh-Co prepared by the method of reduction by stage.     

Synthesis of PtRu nanoparticles from the hydrosilylation reaction and application as catalyst for direct methanol fuel cell

Nanosized Pt, PtRu, and Ru particles were prepared by a novel process, the hydrosilylation reaction. The hydrosilylation reaction is an effective method of preparation not only for Pt particles but also for other metal colloids, such as Ru. Vulcan XC-72 was selected as catalyst support for Pt, PtRu, and Ru colloids, and TEM investigations showed nanoscale particles and narrow size distribution for both supported and unsupported metals. All Pt and Pt-rich catalysts showed the X-ray diffraction pattern of a face-centered cubic (fcc) crystal structure, whereas the Ru and Ru-rich alloys were more typical of a hexagonal close-packed (hcp) structure. As evidenced by XPS, most Pt and Ru atoms in the nanoparticles were zerovalent, except a trace of oxidation-state metals. The electrooxidation of liquid methanol on these catalysts was investigated at room temperature by cyclic voltammetry and chronoamperometry. The results concluded that some alloy catalysts showed higher catalytic activities and better CO tolerance than the Pt-only catalyst; Pt56Ru44/C have displayed the best electrocatalytic performance among all carbon-supported catalysts.     

Spatially resolved 195Pt NMR of carbon-supported PtRu electrocatalysts: local electronic properties, elemental composition, and catalytic activity

While bimetallic nanoparticles (NPs) offer greater tunability of their catalytic performance than their monometallic counterparts, their detailed mechanistic characterizations are still of a great challenging prospect, particularly at nanoscale. In this paper, we describe a unique (195)Pt nuclear magnetic resonance (NMR) based in situ technique that in principle enables us to access local elemental composition and electronic information across the dimension of the Pt-based NPs with decent spatial resolution. When combined with electrochemical analysis, it opens a way to correlate the local elemental composition and electronic properties with the catalytic activity of the bimetallic NPs. Specifically, from the (195)Pt NMR analysis we concluded that (1) for the PtRu/carbon nanofibers, Ru segregates at the surface while Pt does so inside the NPs; (2) alloying Ru substantially reduces the E(F) local density of states (LDOS) at the Pt atoms; (3) the larger variation in s-like E(F) LDOS at the surface region of the PtRu/graphite nanofibers may imply a higher diversity of catalytic sites available for reactions, therefore explains the observed higher reactivity in methanol electro-oxidation.     

The Critical Role Played by the Catalytic Moiety in the Early‐Time Photodynamics of Hydrogen‐Generating Bimetallic Photocatalysts

The effect of the catalytic moiety on the early‐time photodynamics of Ru/M (M=Pt or Pd) bimetallic photocatalysts is studied by ultrafast transient absorption spectroscopy. In comparison to the Ru/Pd photocatalyst described earlier, the Ru/Pt analogue shows complex excited‐state dynamics with three distinct kinetic components ranging from sub‐ps to 10² ps, requiring a more sophisticated photophysical model than that developed earlier for the Ru/Pd complex. In the Pu/Pt photocatalyst, an additional lower‐lying excited state is proposed to quench the hot higher‐lying triplet metal‐to‐ligand charge‐transfer states. Furthermore, a strong excitation wavelength dependence on the population of excited states is observed for both the Ru/Pt and Ru/Pd complexes, indicating a non‐equilibrated distribution even on the 10² ps timescale. These insights shed light on the significant impact of the catalytic moiety on the fundamental early‐time photophysics of Ru‐based photocatalysts.     

Improved hydrogen oxidation reaction under alkaline conditions by Au–Pt alloy nanoparticles

This work demonstrates the outstanding performance of alloyed Au_1 Pt_1 nanoparticles on hydrogen oxidation reaction(HOR) in alkaline solution. Due to the weakened hydrogen binding energy caused by uniform incorporation of Au, the alloyed Au_1 Pt_1/C nanoparticles exhibit superior HOR activity than commercial Pt Ru/C. On the contrary, the catalytic performance of the phase-segregated Au_2 Pt_1/C and Au_1 Pt_1/C bimetallic nanoparticles in HOR is significantly worse. Moreover, Au_1 Pt_1/C shows a remarkable durability with activity dropping only 4% after 3000 CV cycles, while performance attenuation of commercial Pt Ru/C is high up to 15% under the same condition. Our results indicate that the alloyed Au_1 Pt_1/C is a promising candidate to substitute commercial Pt Ru/C for hydrogen oxidation reaction in alkaline electrolyte.     

1-辛烯在Co/CNTs催化剂上的氢甲酰化研究： 钌的促进作用

采用等体积浸渍法制备了碳纳米管负载的钴及钴-钌双金属催化剂，并以1-辛烯的氢甲酰化反应为探针，研究了所制催化剂的催化性能；用TEM、XRD、TPR、TG技术对催化剂的形貌、物相结构、还原行为和热稳定性进行了研究。结果表明，金属钌能够促进金属钴在碳纳米管上的均匀担载，并有助于金属钴的还原，降低了催化剂的还原温度。1-辛烯的氢甲酰化反应结果表明，少量钌的加入，可明显提高反应的转化率和C9-醛的选择性；在双金属催化剂中，金属催化剂的粒径更小，分布更均匀，钌的加入对钴金属催化剂有促进作用。     

由长链醇选择性氧化制备香料(英文)

The activity and the selectivity of Ru and Pt based carbon catalysts in the selective oxidation of long-chain aliphatic alcohols (C8, C10, C12) have been investigated. Ru/AC and Pt/AC always showed good initial activity, however deactivation phenomena rapidly depressed the catalytic per-formance of the catalysts. These phenomena can be limited by modification of Ru/AC and Pt/AC with Au improving the durability of the catalyst. Ru/AC and AuRu/AC showed good selectivity to the corresponding aldehyde (95%) making these catalysts promising for fragrances manufacturing. The advantage in using Au modified catalyst lies on the easier regeneration procedure com-pared to the one necessary for Ru/AC. Pt /AC and AuPt/AC showed a lower selectivity to aldehyde promoting the formation of the acid and the ester formation respectively. The addition of water in the solvent system speeds up the reaction rate but drastically decreased the selectivity to aldehyde especially in the case of Pt based catalysts.     

Cu(PPh3)2BH4作还原剂制备PtCu/C催化剂催化烯烃硅氢 加成反应研究

采用湿法浸渍, Cu(PPh3)2BH4作为还原剂制备了负载型PtCu/C双金属催化剂, Pt∶Cu原子比为0.5～2.0. 用于苯乙烯与三乙氧基硅烷加成反应, Cu元素的引入使Pt/C催化剂的催化性能得到提高, 表现出比Speier催化剂、Karestedt催化剂和Pt/C催化剂更好的β-加成产物选择性. 催化直链烯烃与三乙氧基硅烷加成反应表现出优良的催化性能, 并且催化剂可重复使用.     

Fe3O4修饰的Pt-Ru/C纳米催化剂的制备及其在无溶剂条件下邻氯硝基苯选择性加氢的催化性能

采用浸渍法制备了一系列Pt/Ru质量比不同的Fe₃O₄修饰的Pt-Ru/Fe₃O₄/C催化剂, 运用透射电镜(TEM)、能量弥散X射线谱(EDX)、X射线光电子能谱(XPS)、X射线粉末衍射(XRD)等手段对Pt-Ru/Fe₃O₄/C一系列催化剂进行了表征, 并考察了Pt/Ru质量比不同对催化剂Pt-Ru/Fe₃O₄/C在无溶剂条件下催化邻氯硝基苯(o-CNB)选择性加氢制备邻氯苯胺(o-CAN)催化性能的影响. 研究结果表明, 催化剂的催化活性和对目标产物的选择性跟活性组分Pt、Ru比例有关. 随着Pt/Ru比例的减小, 目标产物o-CAN的选择性有所升高, 然而反应物o-CNB的转化率有所下降. 当Pt/Ru的质量比为2时, o-CNB的转化率降为76.5%, 而目标产物o-CAN的选择性仍然为100%. 与此同时, 我们还对Pt-Ru/Fe₃O₄/C催化剂高的催化活性和目标产物的高选择性可能的原因进行了分析.     

Specific features of the oxygen reaction on catalytic systems in acetonitrile-based electrolytes

The oxygen reaction is studied in acetonitrile solutions on various nanosystems: ХС72, 20Au/C, 20Pt/C, 15Ru/C, 20Pd/C, 20Pt10Ru/C, 20PdRu/C. It is shown that as regards their activity in the oxygen electroreduction reaction, the studied materials form the following series: Pd/C > PtRu/C > PdRu>Pt/C> Ru/C ≈ Au/C ≈ ХС72, whereas in the reaction of Li₂O₂ electrooxidation the activity series is different: Ru/C > PtRu/C > Pd/C > PdRu/C> ХС72 > Pt/C > Au/C. Assumptions are drawn on the nature of passivation for systems with the highest activity. The prospects of bimetallic catalysts (PtRu/C and PdRu/С) that combine the high activity in reactions of oxygen electroreduction and Li₂O₂ electrooxidation and also retain a considerable part of their activity on cycling are discussed. These results make it possible to judge on the possible applications of bimetallic nanosystems with bifunctional catalytic properties in lithiumoxygen fuel cells.     

硝基芳烃氢化还原反应中高分子负载催化剂的双金属协同效应

制备了聚Ｎ－乙烯基－２－吡咯烷酮ＰＶＰ负载钯催化剂Ｐｄ／ＰＶＰ及各种双金属催化剂（１－ｍ）Ｐｄ－ｍＭ／ＰＶＰ，并用于硝基芳烃的加氢还原中，其中Ｐｄ／ＰＶＰ中加入Ｈ２ＰｔＣｌ６的效果最佳，碱的用量、溶剂和Ｐｄ、Ｐｔ的比例都对催化剂的活性有明显的影响，双金属催化剂０．８０Ｐｄ－０．２０Ｐｔ／ＰＶＰ在温和条件下能高活性，高选择性地催化硝基芳烃还原，得到相应的芳胺。     

PtRu/carbon nanotube nanocomposite synthesized in supercritical fluid: a novel electrocatalyst for direct methanol fuel cells

Platinum/ruthenium nanoparticles were decorated on carbon nanotubes (CNT) in supercritical carbon dioxide, and the nanocomposites were characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD). TEM images show that the particles size is in the range of 5-10 nm, and XRD patterns show a face-centered cubic crystal structure. Methanol electrooxidation in 1 M sulfuric acid electrolyte containing 2 M methanol were studied onPtRu/CNT (Pt, 4.1 wt%; Ru, 2.3 wt%; molar ratio approximately Pt/Ru = 45:55) catalysts using cyclic voltammetry, linear sweep voltammetry, chronoamperometry, and electrochemical impedance spectroscopy. All the electrochemical results show that PtRu/CNT catalysts exhibit high activity for methanol oxidation which resulted from the high surface area of carbon nanotubes and the nanostructure of platinum/ruthenium particles. Compared with Pt/CNT, the onset potential is much lower and the ratio of forward anodic peak current to reverse anodic peak current is much higher for methanol oxidation, which indicates the higher catalytic activity of PtRu/CNT. The presence of Ru with Pt accelerates the rate of methanol oxidation. The results demonstrated the feasibility of processing bimetallic catalysts in supercritical carbon dioxide for fuel cell applications.     

Carbon monoxide adsorption on Ru-modified Pt surfaces: time-resolved infrared reflection absorption studies in ultrahigh vacuum

The vibrational spectra of CO adsorbed on Ru-modified Pt(100) surfaces prepared by chemical vapor deposition (condensation of Ru(3)(CO)(12) at 105 K followed by X-ray irradiation and thermal decomposition at 650 K in ultrahigh vacuum, UHV) was investigated by time-resolved infrared reflection absorption spectroscopy (IRAS) in UHV. Spectra were recorded while Ru/Pt(100) bimetallic surfaces (theta(Ru) = 0.24 and 0.52 by X-ray photoelectron spectroscopy, XPS) were dosed with gas-phase CO. Analysis of the data revealed that for a wide range of calibrated CO exposures, the linear CO-stretching region displays two features: a higher energy peak (2085-2100 cm(-1)), attributed to CO adsorbed on pristine Pt(100) sites, and a lower energy peak (2066-2092 cm(-1)), ascribed to adsorption of CO on sites on the surface induced by the presence of Ru. Similar experiments were performed on bimetallic specimens annealed repeatedly in UHV to 650 K to promote partial Ru dissolution into the lattice and thus render surfaces gradually enriched in Pt. For all surfaces and CO exposures examined, the total integrated area under the two CO spectral features remained fairly constant and equal in value to the corresponding areas found for bare Pt(100). If it is assumed that a fixed exposure leads to a fixed coverage on both bare and Ru-modified Pt(100)surfaces, and the thermal treatment leads to an exchange of Ru by Pt sites without altering significantly the total number of metal sites on the surface, the absorption cross sections for both of these peaks are virtually the same.