掺氮纳米炭球担载高分散钯纳米催化剂的制备及其苯甲醇氧化性能(英文)

负载型贵金属纳米催化剂中的金属纳米粒子易发生团聚或流失,因此提高金属活性组分的分散性和稳定性很重要。我们报道了一种制备高分散钯纳米催化剂的方法,通过浸泡法将氯钯酸前驱体负载到苯并噁嗪聚合物上,再经过惰性气氛一步热解得到纳米炭球担载钯催化剂.催化剂性能通过温和条件下苯甲醇氧化反应进行评价.经过500℃热处理制备的催化剂,从TEM图可以看出Pd纳米粒子均匀分散在载体上,尺寸大小约为3 nm,这是由于载体和钯活性组分的配位作用有利于提高钯纳米粒子的分散性和稳定性.通过调控金属负载量及负载时间,尽可能地实现活性组分分布在载体外表面,制备的催化剂上最高TOF为690 h-1.此催化剂同时具有较好的循环稳定性,失活后的催化剂经过200℃焙烧即可实现再生.     

Fe2O3/rGO纳米复合物的制备及其储锂和储钠性能

金属氧化物可通过电化学转换反应与锂离子及钠离子发生多电子可逆结构转换,是一类极具应用前景的高容量锂离子和钠离子电池负极材料。实验以氧化石墨烯和铁盐为前驱体,采用简单的溶剂法,成功将Fe₂O₃纳米单晶粒子均匀负载于石墨烯的导电片层上,获得Fe₂O₃/rGO(还原氧化石墨烯)纳米复合材料。复合电极在锂离子和钠离子电池中都表现出优异的充放电性能和循环稳定性。实验结果表明石墨烯的包覆不仅能降低Fe₂O₃发生转换反应的电荷传递阻抗,而且能够稳定电极在循环过程中带来的结构转变,极大改善电极大电流充放能力和循环稳定性。本研究为发展高容量的锂离子和钠离子电池负极材料提供了可行的途径。     

溶剂化金属原子浸渍法制备高分散负载型催化剂——Ⅹ.K-Fe/硅沸石催化剂在CO/H_2合成低碳烯烃反应中的催化性能

溶剂化金属原子浸渍(SMAI)法是制备高分散负载型催化剂的一种新方法,它可减少活性组分在载体表面的聚集,使金属组分得到均匀分散,绝大多数金属颗粒的粒度小于25A,且粒度分布范围较窄。以前的工作大多选用Al_2O_3、MgO和SiO_2等无机氧化物或活性炭作为催化剂载体,载体多为无孔或微孔材料,载体的比表面限制了活性组分的负载量及分散度。本文采用憎水、亲有机物的中孔(5—6A)硅沸石作为载体,以溶剂化金属原子浸渍法制备了K-Fe/硅沸石,作为CO加氢合成低碳烯烃反应的催化剂,由于SMAI催化剂活性组份高度分散,同时沸石载体孔道具有良好的择形效应,从而有利于CO的转化和低碳烯烃的生成。     

Au-Pd/石墨烯和Au-Pd/碳纳米管催化电化学氧化甲酸（英文）

利用化学还原法合成了石墨烯和碳纳米管负载的Au-Pd纳米粒子.石墨烯负载的Au-Pd纳米粒子(AuPd/G)的粒径远小于碳纳米管负载的Au-Pd纳米粒子(Au-Pd/CNTs)的粒径,且Au-Pd纳米粒子在复合材料上分布均匀.与碳纳米管负载的Au-Pd纳米粒子催化剂相比,石墨烯负载的Au-Pd催化剂对甲酸的催化显示出更好的电催化活性,结果表明作为Au-Pd纳米粒子的基底,石墨烯可以明显提高Au-Pd纳米粒子的电催化活性.在0.1mol/L H_2SO_4中,该纳米修饰电极对甲酸有良好的电催化作用,甲酸在电极上的氧化动力学过程为扩散控制过程.     

Co-MOFs材料在锂离子电池负极材料中的应用研究进展

该文阐述了近年来钴金属有机骨架(Co-MOFs)材料在锂离子电池负极材料中的应用研究进展,分别对Co-MOFs材料及Co-MOFs衍生的氧化钴、氧化钴/碳复合材料、硫化钴/碳复合材料等用作锂离子电池负极材料进行了分类总结,旨在为广大研究者提供相关方面的信息.     

铜-氧化铈界面:几何及电子结构

纳米催化材料的性能主要由粒子尺寸、形貌和界面决定,即活性位点的电子及几何结构.尺寸、形貌可控的纳米催化材料的合成及其反应性能的研究,即催化剂的构效关系,一直是催化领域的研究热点.氧化物负载的金属催化剂广泛应用于多相催化反应过程.基于氧化铈优异的氧化还原性能, Cu/CeO2催化剂在CO氧化、N2O消除、水气变换、甲醇合成等反应中表现出优异性能.其中,通过铜物种与氧化铈表面化学键合形成的金属-载体界面通常被认为是催化活性中心.铜物种和氧化铈的相互作用主要体现在氧化铈固定铜物种,而铜物种促进氧化铈的氧化还原能力,涉及Cu^2+/Cu^+/Cu^0和Ce^3+/Ce^4+之间电子的传输和转移.Cu/CeO2催化剂活性位的原子结构与金属-载体相互作用程度密切相关.氧化铈形貌和铜负载量是决定界面电子和几何结构的重要因素.常见的纳米氧化铈形貌包括纳米粒子(多面体)、纳米棒和纳米立方体,可分别选择性暴露(111)、(110)和(100)晶面;这些晶面上原子配位环境和化学性能决定了铜-氧化铈的键合方式和界面结构.与暴露{100}晶面的纳米立方体相比,主要暴露{100}/{110}镜面的氧化铈纳米棒、暴露{111}/{100}晶面的纳米粒子与铜物种具有更强的金属-载体相互作用程度,也更有利于铜物种的分散.铜的负载量也显著影响铜物种在特定氧化铈表面的分散度和化学状态;随着铜负载量的增加,可在氧化铈表面形成层状铜、铜团簇和铜纳米粒子.通常情况下,低负载量有利于单层、双层铜物种的形成,高负载量时则出现多层铜和铜纳米粒子.催化活性位通常是由铜原子与氧化铈上的氧空穴相互作用产生,与氧化铈表面氧空穴的数量和密度密切相关,即氧化铈形貌.本文总结了Cu/CeO2催化剂的研究进展,讨论了氧化铈形貌和铜负载量对铜物种分散度和化学状态的影响规律,总结了铜氧化铈界面结构的多维度表征结果,比较了Cu/CeO2催化剂在CO氧化、水气变换及甲醇合成中的活性位结构和反应机制.     

三维连续结构Li4Ti5O12/石墨烯纳米复合材料：制备和其锂离子电池超长循环性能

利用具有三维连续纳米孔结构的热剥离石墨烯为骨架制备Li4Ti5O12/石墨烯纳米复合材料。通过乙醇挥发法在热剥离石墨烯的纳米孔道内引入前驱物,进一步高温热处理,在热剥离石墨烯的孔道内原位形成Li4Ti5O12纳米粒子。利用复合材料作为锂离子电池电极材料。电化学反应过程中,热剥离石墨烯的三维连续结构确保了Li4Ti5O12纳米粒子与石墨烯在长循环过程中的有效接触。因此,复合材料表现出优异的循环稳定性。在5C下,5 000次循环后,其容量保持率高达94%。     

分级结构氮掺杂碳纳米笼担载的铂基高效甲醇氧化电催化剂

高性能低成本的担载型铂基催化剂是直接甲醇燃料电池(DMFC)实用化过程中的一大挑战.利用高比表面积、高稳定性、容易负载金属的载体实现 Pt颗粒的高度分散,既可提高催化剂的催化性能,又可提高 Pt的利用率以降低成本,是担载型 Pt基催化剂实用化的有效途径.碳材料是一种常用的催化剂载体,近年来我们课题组发展了一种高性能的碳纳米笼材料,并可通过异原子掺杂调变其表面性能,提高其活性和负载能力.我们采用原位氧化镁模板法制备氮掺杂碳纳米笼：以具有多级结构的碱式碳酸镁作为氧化镁模板的前体,吡啶为碳源和氮源,经高温热解沉积,在原位形成的氧化镁模板表面形成氮掺杂的石墨化碳纳米薄层;经稀盐酸浸泡并洗涤,获得高纯度的氮掺杂碳纳米笼.氮掺杂碳纳米笼具有分等级的微纳米结构、高导电性、高比表面积和可调变的孔结构,结合表面氮原子的锚钉作用,氮掺杂碳纳米笼有望成为电化学催化剂 Pt的优良载体.
　　在前期研究基础上,本文探索多级结构氮掺杂碳纳米笼(hNCNC)作为新型载体负载 Pt的能力,并评价所构建的负载型催化剂 Pt/hNCNC的电催化性能.通过简便的微波辅助多元醇还原法,将氯铂酸还原成 Pt纳米粒子负载于 hNCNC的表面.为了揭示氮掺杂的效应,我们对比研究了具有相似分级结构但无掺杂的碳纳米笼(hCNC)以及商业化活性炭(Val-can XC-72)作为载体的情况.经热重(TG)和 X射线光电子能谱(XPS)分析,三种催化剂 Pt/hNCNC、Pt/hCNC和 Pt/XC-72的负载量均接近理论负载量(23.1 wt%),都主要以金属态存在.然而,扫描电子显微镜(SEM)和透射电子显微镜(TEM)结果表明, Pt/hNCNC的 Pt分散状态优于 Pt/hCNC,更远优于 Pt/XC-72. Pt/hNCNC的平均 Pt粒径最小,仅约3.3 nm.这种良好的分散状态主要得益于氮原子掺杂,高负电性的氮原子改变了局域的表面极性,有利于 Pt颗粒的成核,也有利于固定 Pt颗粒.
　　由于 hNCNC对 Pt的优异分散能力, Pt/hNCNC表现出高的电化学活性面积.氢吸附和一氧化碳溶出伏安曲线表明, Pt/hNCNC的电化学活性面积高于 Pt/hCNC和 Pt/XC-72,这与显微观察和 X射线衍射(XRD)结果相吻合. Pt/hNCNC展现出优异的甲醇电催化氧化活性和高稳定性,其催化电流明显高于 Pt/hCNC和 Pt/XC-72,电流衰减亦慢于 Pt/hCNC和 Pt/XC-72. hNCNC的分级微纳米结构有利于孔内传质和电子输运,从而提高反应速度. hNCNC的氮掺杂有利于 Pt在载体表面的分散,增强了载体-金属相互作用,提高了电化学活性面积和催化活性.为了进一步考察 hNCNC对 Pt的负载能力,本文还考察了高负载量 Pt/hNCNC的性能.在负载量高达60 wt%时, Pt/hNCNC中的 Pt颗粒仍无明显聚集,其甲醇氧化电流增加了30%,可以有效提高 DMFC的输出电流密度.
　　综上可见, hNCNC可以有效分散并稳定 Pt颗粒,从而提高电化学活性面积和甲醇电催化氧化活性,优于未掺杂的碳纳米笼和传统碳材料,展示了 hNCNC高分散 Pt颗粒用作 DMFC的高效阳极催化剂的重要前景,也表明 hNCNC有望成为应用广泛的新型载体.     

铜-氧化铈界面:几何及电子结构（英文）

纳米催化材料的性能主要由粒子尺寸、形貌和界面决定,即活性位点的电子及几何结构.尺寸、形貌可控的纳米催化材料的合成及其反应性能的研究,即催化剂的构效关系,一直是催化领域的研究热点.氧化物负载的金属催化剂广泛应用于多相催化反应过程.基于氧化铈优异的氧化还原性能, Cu/CeO_2催化剂在CO氧化、N_2O消除、水气变换、甲醇合成等反应中表现出优异性能.其中,通过铜物种与氧化铈表面化学键合形成的金属-载体界面通常被认为是催化活性中心.铜物种和氧化铈的相互作用主要体现在氧化铈固定铜物种,而铜物种促进氧化铈的氧化还原能力,涉及Cu~(2+)/Cu~+/Cu~0和Ce~(3+)/Ce~(4+)之间电子的传输和转移.Cu/CeO_2催化剂活性位的原子结构与金属-载体相互作用程度密切相关.氧化铈形貌和铜负载量是决定界面电子和几何结构的重要因素.常见的纳米氧化铈形貌包括纳米粒子(多面体)、纳米棒和纳米立方体,可分别选择性暴露(111)、(110)和(100)晶面;这些晶面上原子配位环境和化学性能决定了铜-氧化铈的键合方式和界面结构.与暴露{100}晶面的纳米立方体相比,主要暴露{100}/{110}镜面的氧化铈纳米棒、暴露{111}/{100}晶面的纳米粒子与铜物种具有更强的金属-载体相互作用程度,也更有利于铜物种的分散.铜的负载量也显著影响铜物种在特定氧化铈表面的分散度和化学状态;随着铜负载量的增加,可在氧化铈表面形成层状铜、铜团簇和铜纳米粒子.通常情况下,低负载量有利于单层、双层铜物种的形成,高负载量时则出现多层铜和铜纳米粒子.催化活性位通常是由铜原子与氧化铈上的氧空穴相互作用产生,与氧化铈表面氧空穴的数量和密度密切相关,即氧化铈形貌.本文总结了Cu/CeO_2催化剂的研究进展,讨论了氧化铈形貌和铜负载量对铜物种分散度和化学状态的影响规律,总结了铜氧化铈界面结构的多维度表征结果,比较了Cu/CeO_2催化剂在CO氧化、水气变换及甲醇合成中的活性位结构和反应机制.     

锰氧化物/碳氮三维网络结构复合材料的制备及锂电性能

通过硝酸锰和乙醇的水热反应在三聚氰胺泡棉(MF)上生成三氧化二锰颗粒,氮气下高温处理后形成锰氧化物负载碳氮三维网络结构的复合物。碳氮网络结构提高了充放电过程中材料结构的稳定性及导电性,且烧结过程中产生的孔道结构有利于锂离子传输,使得该复合材料作为负极在锂离子电池中表现出优异的充放电性能和循环稳定性。材料的比容量和循环稳定性大大提高,经500℃处理后的MnO/CNnws-500材料在160次循环后仍然保留590 m Ah·g~(-1)的比容量,达到氧化亚锰理论容量755 m Ah·g~(-1)的78%。     

2020 Roadmap on Carbon Materials for Energy Storage and Conversion

Carbon is a simple, stable and popular element with many allotropes. The carbon family members include carbon dots, carbon nanotubes, carbon fibers, graphene, graphite, graphdiyne and hard carbon, etc. They can be divided into different dimensions, and their structures can be open and porous. Moreover, it is very interesting to dope them with other elements (metal or non‐metal) or hybridize them with other materials to form composites. The elemental and structural characteristics offer us to explore their applications in energy, environment, bioscience, medicine, electronics and others. Among them, energy storage and conversion are extremely attractive, as advances in this area may improve our life quality and environment. Some energy devices will be included herein, such as lithium‐ion batteries, lithium sulfur batteries, sodium‐ion batteries, potassium‐ion batteries, dual ion batteries, electrochemical capacitors, and others. Additionally, carbon‐based electrocatalysts are also studied in hydrogen evolution reaction and carbon dioxide reduction reaction. However, there are still many challenges in the design and preparation of electrode and electrocatalytic materials. The research related to carbon materials for energy storage and conversion is extremely active, and this has motivated us to contribute with a roadmap on ‘Carbon Materials in Energy Storage and Conversion’.     

In Situ Growth of Hierarchical SnO2 Nanosheet Arrays on 3D Macroporous Substrates as High‐Performance Electrodes

Finding out how to overcome the self‐aggregation of nanostructured electrode materials is a very important issue in lithium‐ion battery technology. Herein, by an in situ construction strategy, hierarchical SnO₂ nanosheet architectures have been fabricated on a three‐dimensional macroporous substrate, and thus the aggregation of the SnO₂ nanosheets was effectively prevented. The as‐prepared hierarchical SnO₂ nanoarchitectures on the nickel foam can be directly used as an integrated anode for lithium‐ion batteries without the addition of other ancillary materials such as carbon black or binder. In view of their apparent advantages, such as high electroactive surface area, ultrathin sheet, robust mechanical strength, shorter ion and electron transport path, and the specific macroporous structure, the hierarchical SnO₂ nanosheets exhibit excellent lithium‐storage performance. Our present growth approach offers a new technique for the design and synthesis of metal oxide hierarchical nanoarrays that are promising for electrochemical energy‐storage electrodes without carbon black and binder.     

Natural Cellulose Derived Nanocomposites as Anodic Materials for Lithium‐Ion Batteries

Bio‐inspired synthetic method provides an effective shortcut to fabricate functional nanostructured materials with specific morphologies and designed functionalities. Natural cellulose substances (e. g., commercial laboratory cellulose filter paper) possesses unique three‐dimensionally cross‐linked porous structures and abundant functional groups for the functional modification on the surfaces. The deposition of metal oxide gel film on the surfaces of the cellulose nanofibers is facilely to be achieved through the surface sol‐gel process, resulting in metal oxide replicas of the initial cellulose substance or metal‐oxide/carbon nanocomposites. Moreover, the as‐deposited metal oxide gel films coated on the cellulose fiber surfaces provide ideal platforms for the further formation of specific functional assemblies, and eventually to the corresponding nanocomposite materials. Based on this methodology, various nanostructured composites were prepared and employed as anodic materials for lithium‐ion batteries, including metal‐oxides‐based (such as SnO₂, TiO₂, MoO₃, Fe_xO_y, and SiO₂) and Si‐based composites, as summarized in this personal account. Benefiting from the unique hierarchically porous network structures and the synergistic effects among the composite components of the anodic materials, the transfer of electrons/ions is accelerated and the structural stability of the electrode is enhanced, leading to the improved lithium storage performances and promoted cycling stability.     

Synthesis of lithium metal silicates for lithium ion batteries

Synthesis strategies, nanostructures, and different electrochemical performances are prominent features of rechargeable batteries. Three types Li₂MSiO₄ cathode metarials for lithium ion batteries:Li₂FeSiO₄, Li₂MnSiO₄, and Li₂CoSiO₄ are scientifically discussed, and the comprehensive summaries and evaluations are given in this review.     

Recent Advances in Porous Carbon Materials for Electrochemical Energy Storage

Climate change and the energy crisis have promoted the rapid development of electrochemical energy‐storage devices. Owing to many intriguing physicochemical properties, such as excellent chemical stability, high electronic conductivity, and a large specific surface area, porous carbon materials have always been considering as a promising candidate for electrochemical energy storage. To date, a wide variety of porous carbon materials based upon molecular design, pore control, and compositional tailoring have been proposed for energy‐storage applications. This focus review summarizes recent advances in the synthesis of various porous carbon materials from the view of energy storage, particularly in the past three years. Their applications in representative electrochemical energy‐storage devices, such as lithium‐ion batteries, supercapacitors, and lithium‐ion hybrid capacitors, are discussed in this review, with a look forward to offer some inspiration and guidelines for the exploitation of advanced carbon‐based energy‐storage materials.     

Self‐Assembling Synthesis of Free‐standing Nanoporous Graphene–Transition‐Metal Oxide Flexible Electrodes for High‐Performance Lithium‐Ion Batteries and Supercapacitors

The synthesis of nanoporous graphene by a convenient carbon nanofiber assisted self‐assembly approach is reported. Porous structures with large pore volumes, high surface areas, and well‐controlled pore sizes were achieved by employing spherical silica as hard templates with different diameters. Through a general wet‐immersion method, transition‐metal oxide (Fe₃O₄, Co₃O₄, NiO) nanocrystals can be easily loaded into nanoporous graphene papers to form three‐dimensional flexible nanoarchitectures. When directly applied as electrodes in lithium‐ion batteries and supercapacitors, the materials exhibited superior electrochemical performances, including an ultra‐high specific capacity, an extended long cycle life, and a high rate capability. In particular, nanoporous Fe₃O₄–graphene composites can deliver a reversible specific capacity of 1427.5 mAh g^?1 at a high current density of 1000 mA g^?1 as anode materials in lithium‐ion batteries. Furthermore, nanoporous Co₃O₄–graphene composites achieved a high supercapacitance of 424.2 F g^?1. This work demonstrated that the as‐developed freestanding nanoporous graphene papers could have significant potential for energy storage and conversion applications.     

Developments in nanostructured LiMPO4 (M = Fe, Co, Ni, Mn) composites based on three dimensional carbon architecture

Nanostructured materials lie at the heart of fundamental advances in efficient energy storage and/or conversion, in which surface processes and transport kinetics play determining roles. This review describes recent developments in the synthesis and characterization of composites which consist of lithium metal phosphates (LiMPO(4), M = Fe, Co, Ni, Mn) coated on nanostructured carbon architectures (unordered and ordered carbon nanotubes, amorphous carbon, carbon foams). The major goal of this review is to highlight new progress in using different three dimensional nanostructured carbon architectures as support for the phosphate based cathode materials (e.g.: LiFePO(4), LiCoPO(4)) of high electronic conductivity to develop lithium batteries with high energy density, high rate capability and excellent cycling stability resulting from their huge surface area and short distance for mass and charge transport.     

Synthesis and Comparative Investigation of Silicon Transition Metal Silicide Composite Anodes for Lithium Ion Batteries

A significant increase in energy density of lithium ion batteries (LIBs) can be achieved by using high‐capacity, silicon (Si)‐based negative electrode materials. Several challenges arise from the enormous volumetric changes of Si during lithiation/delithiation, such as disintegration/pulverization of the active material and the electrode as well as ongoing electrolyte decomposition, leading to rapid capacity fading. Here, we synthesize and comparatively investigate three different porous transition metal‐Si‐carbon composite materials that are composed of an active Si phase and the corresponding inactive metal‐silicide phases. In this material design, the inactive phases, as well as the pores serve as a buffer to attenuate the previously mentioned detrimental effects. The synthesized materials are studied with respect to their structural and surface properties and are characterized electrochemically regarding their rate performance, and long‐term charge/discharge cycling stability. Thereby, the composite materials show a promising rate capability and a high specific capacity. Their low initial Coulombic efficiency, due to the porous structure, can be partially compensated by pre‐lithiation. This is demonstrated by the application of the synthesized materials in a LIB full‐cell set‐up vs. NMC‐111 cathodes, where the amount of lithium is confined due to anode/cathode capacity balancing.     

Covalent Assembly of MoS2 Nanosheets with SnS Nanodots as Linkages for Lithium/Sodium‐Ion Batteries

Weak van der Waals interactions between interlayers of two‐dimensional layered materials result in disabled across‐interlayer electron transfer and poor layered structural stability, seriously deteriorating their performance in energy applications. Herein, we propose a novel covalent assembly strategy for MoS₂ nanosheets to realize unique MoS₂/SnS hollow superassemblies (HSs) by using SnS nanodots as covalent linkages. The covalent assembly based on all‐inorganic and carbon‐free concept enables effective across‐interlayer electron transfer, facilitated ion diffusion kinetics, and outstanding mechanical stability, which are evidenced by experimental characterization, DFT calculations, and mechanical simulations. Consequently, the MoS₂/SnS HSs exhibit superb rate performance and long cycling stability in lithium‐ion batteries, representing the best comprehensive performance in carbon‐free MoS₂‐based anodes to date. Moreover, the MoS₂/SnS HSs also show excellent sodium storage performance in sodium‐ion batteries.     

锂离子电池纳米负极电极材料

综述了锂离子电池纳米负极材料研究的最新进展,根据材料的化学组成把锂离子电池纳米级负极材料分为金属基纳米负极材料、非金属基纳米负极材料、金属-非金属复合纳米负极材料、纳米氧化物负极材料和其它纳米负极材料。论述了各类材料的优势和存在的问题,探讨了这些材料的主要制备方法与其结构、形貌和电化学性能之间的关系,展望了纳米负极材料用于锂离子电池的前景。