高分子卟啉及其金属配合物的研究进展

高分子金属卟啉在载氧、导电及催化氧化性能方面日益受到重视，高分子金属卟啉有多种连接方式，如金属卟啉以配位键或共价键担载于高分子，金属卟啉轴向聚合及卟啉平面聚合等。本文综述了近１０年来高分子卟啉及其金属配合物在合成和性能方面的最新研究成果。     

卟啉化合物的研究 Ⅵ.双环双金属钴卟啉的合成

金属卟啉配合物对氧还原反应有良好的电催化活性,是一种高效的氧还原反应催化剂.查全性等的研究表明,四对甲氧苯基钴卟啉配合物对氧还原反应有很好的电催化活性和稳定性,是适用于广泛pH范围的氧化还原反应催化剂.Collman等发现双环双金属卟啉配合物比单环单金属卟啉的催化活性好,这可能是由于两个卟啉环和两个中心金属离子协同作用的结果.Collman和Anson等合成了一系列“面-面”双环双金属卟啉配合物,并用于催化氧还原反应,发现它们可催化氧还原的四电子反应,将氧分子直接还原成水,可极大限度地     

金属卟啉白蛋白结合体模拟SOD酶性能研究

将两类水难溶性金属卟啉(MP),meso-四苯基卟啉金属配合物(MTPP,M=ZnII,CoII)和meso-四(p-羟基苯基)卟啉金属配合物(MTpHPP,M=ZnII,CoII)分别与牛血清白蛋白(BSA)结合,制得水溶性金属卟啉白蛋白结合体(MP@BSA).采用UV-vis光谱、聚丙烯酰胺凝胶电泳(PAGE)、圆二色谱进行了表征与分析,发现金属卟啉的水溶性和稳定性得到大幅度提高.采用NBT光还原法测定了MP@BSA结合体清除超氧阴离子自由基(O2·-)的能力,发现结合体MP@BSA具有清除O2·-的性能,与小分子金属卟啉相比,结合体的抗O2·-性能提高了一个数量级.MP@BSA抗氧化活性分别是VC和BSA的600倍和40倍.其中,羟基取代金属卟啉结合体表现出更强的清除O2·-的活性,CoTpHPP@BSA的EC50为1.5μmol/L,对天然Cu,Zn-SOD的模拟度为2.73%.最后提出了生物高分子结合体清除O2·-的可能机理.     

金属卟啉催化烯烃环氧化及反应机理研究*

本文就铁卟啉及锰卟啉模拟酶体系近年来在催化烯烃环氧化反应机理方面的最新研究成果进行了详细阐述。均相催化剂固载化技术的应用,使金属卟啉配合物担载于无机载体上克服了卟啉的二聚、催化剂再生等难题,有力地推动了金属卟啉配合物应用研究的发展。     

新型中位不对称卟啉及其金属配合物的合成

在酶的参与下,许多生物氧化过程能在常温常压下进行,并具有高度的选择性。某些金属酶的活性中心是含有类似卟啉的金属配合物,它能在温和条件下活化分子氧和催化各种有机物的氧化反应。目前,各类金属卟啉及其衍生物已被广泛用作天然氧载体(例如血红蛋白)和加氧酶(如细胞色素 P-450单加氧酶)的模型化合物,因此,对其性质的研究具有十分重要的理论和实际意义。     

聚合物键合Cu（Salen）的合成及其催化作用

一些简单的无机配合物已经广泛地用作氧载体和氧化催化剂,其中研究较多的是过渡金属卟啉和席夫碱（Schiff base）－过渡金属配合物。其中,席夫碱－过渡金属配合物的合成简单、易于控制配体的电子与立体因素,因而其催化性能的调变更具有灵活性,其分子氧体系已用于烯烃的环氧化和醇类的氧化,卟啉钴配合物－分子氧体系对硫醇的催化氧化研究已报道,其于席夫碱－金属配合物具有结合分子氧的特性和催经作用,以及高分子配合物催化剂的特点,我们合成了聚合物键合双水扬醛缩乙二胺合铜（Ⅱ）,并将其用于催化分子氧氧化丙硫醇转化成二硫化物。     

具有模拟SOD功能的大分子

生命活动中用于维持生物体内超氧阴离子自由基动态平衡的超氧化物歧化酶(superoxidedismutase,SOD)是一类金属酶,属于典型的生物大分子金属络合物,因其在生命活动中所起的重要作用而备受关注。目前,有关SOD的模拟已从小分子化合物的模拟,走向大分子环境与活性中心相结合的系统模拟。本文从高分子化合物角度对模拟SOD的研究进展作一综述,以期为设计并开发具有生物相容且高活性的新型高分子抗氧化剂提供新思路。天然大分子有蛋白质与多肽、多糖、分子聚集体,目前所采用的蛋白质(多肽)是性能稳定的天然蛋白质或通过基因重组技术生物合成的蛋白质或多肽,所采用的多糖类物质主要有右旋糖酐、羧甲基纤维素、壳聚糖等。小分子活性化合物(如金属卟啉、新型肟类为配体的同核与异核复合物、salen型金属配合物等)通过与这些天然大分子结合,在提高活性的同时也改善了其稳定性。将活性小分子物质与分子聚集体(如胶束、脂质体)结合制得的SOD模拟物可以模拟天然SOD在体内的环境,提高抗氧化活性和体内循环时间。合成高分子模拟SOD的工作主要集中于高分子接枝金属配合物的研究,其中典型的合成高分子有聚乙二醇(polyethylene glycol,PEG)、聚L-赖氨酸、聚(苯乙烯-马来酸酐)、聚(环己烷-1,4-丙酮二亚甲基缩酮)、氯化聚苯乙烯树脂、聚乳酸和一些嵌段共聚物,其抗氧化活性与金属配体有关,是一类潜在的抗癌药物。     

四(α-萘基)四苯并卟啉钴配合物的光谱电化学性质

Ｋｅｌｅｔ等［１］研究ＣｏＴＭＡＰＩ催化水制取氢气的反应时指出，活性中心是一价钴卟啉．曹锡章等［２］研究钴卟啉催化ＣＯ２电化学还原时指出，活性中心也是一价钴卟啉．然而，不稳定价态的金属卟啉配合物的制备和性质研究较为困难．光谱电化学的迅速发展为不稳定价...     

手性金属Salen配合物在不对称催化中的应用*

手性Salen金属配合物已在不对称催化中得到了广泛的应用。本文主要介绍了可溶性的手性金属Salen配合物在不对称催化反应中的应用以及手性金属Salen配合物固载化研究取得的进展。     

疏水性金属卟啉的合成及催化性能研究

本文合成了一类带疏水性长链的对称卟啉及其金属配合物, 研究了该类金属卟啉在CH2Cl2/H2O两相体系中催化苯乙烯的环氧化反应性能。通过以上研究, 发现催化反应体系中水相PH值对烯烃环氧化反应有很大影响; 改变金属卟啉的疏水性对催化反应影响不大; 具不同中心金属离子的金属卟啉有不同的催化活性, 催化活性顺序为:Mn>Co>Ni>Cu。     

Investigated aerobic oxidation of aminochlorophenol catalyzed by phthalocyanine complexes

The synthesis of 9-Octadecenamide substituted Fe(II) phthalocyanine (ODAFePc) and Ni(II) phthalocyanine (ODANiPc) complexes from Fe(II) tetracarboxylic acid phthalocyanine (FeTcPc) and Ni(II) tetracarboxylic acid phthalocyanine (NiTcPc) with 9-Octadecenamide. These complexes have high molecular weight and soluble in organic solvents. The complexes have been confirmed by FTIR, Mass spectroscopy, UV–Visible X-ray diffraction, and thermogravimetric analysis. The synthesized complexes exhibit excellent stability and are catalytically active in 2-amino-4-chlorophenol (ACP) oxidation. The new method was used for the determination of the oxidation of phenol by applying different experimental parameters like concentration, catalytic quantity, temperature, and pH to get a good yield and catalytic activity of ODAFePc and ODANiPc were studied. ACP was oxidized by dissolved oxygen with ODAFePc and ODANiPc as a catalyst and immediately combined with 4-aminoantipyrine (4-AAP) to form a pink dye and was determined by appearance of absorption intensity at 580 ​nm. All the experimental results show that ODAFePc and ODANiPc complexes exhibit good catalytic behavior on oxidation of 2-amino-4-chlorophenol.     

Polymer supported catalysts for oxidation of phenol and cyclohexene using hydrogen peroxide as oxidant

Polymer supported transition metal complexes of N,N′-bis (o-hydroxy acetophenone) hydrazine (HPHZ) Schiff base were prepared by anchoring its amino derivative Schiff base (AHPHZ) on cross-linked (6 wt%) polymer beads and then loading iron(III), copper(II) and zinc(II) ions in methanol. The loading of HPHZ Schiff base on polymer beads was 3.436 mmol g⁻¹ and efficiency of complexation of polymer anchored HPHZ Schiff base for iron(III), copper(II) and zinc(II) ions was 83.21, 83.40 and 83.17%, respectively. The efficiency of complexation of unsupported HPHZ Schiff base for these metal ions was lower than polymer supported HPHZ Schiff base. The structural information obtained by spectral, magnetic and elemental analysis has suggested octahedral and square planar geometry for iron(III) and copper(II) ions complexes, respectively, with paramagnetic behavior, but zinc(II) ions complexes were tetrahedral in shape with diamagnetic behavior. The complexation with metal ions has increased thermal stability of polymer anchored HPHZ Schiff base. The catalytic activity of unsupported and polymer supported HPHZ Schiff base complexes of metal ions was evaluated by studying the oxidation of phenol (Ph) and epoxidation of cyclohexene (CH). The polymer supported metal complexes showed better catalytic activity than unsupported metal complexes. The catalytic activity of metal complexes was optimum at a molar ratio of 1:1:1 of substrate to oxidant and catalyst. The selectivity for catechol (CTL) and epoxy cyclohexane (ECH) in oxidation of phenol and epoxidation of cyclohexene was better with polymer supported metal complexes in comparison to unsupported metal complexes. The energy of activation for oxidation of phenol (22.8 kJ mol⁻¹) and epoxidation of cyclohexene (8.9 kJ mol⁻¹) was lowest with polymer supported complexes of iron(III) ions than polymer supported Schiff base complexes of copper(II) and zinc(II) ions.     

Oxidation and photooxidation of sulfide and thiosulfate ions catalyzed by transition metal chalcogenides and phthalocyanine complexes

The catalytic and photocatalytic activities of supported cobalt or zinc phthalocyanine complexes, bulk MoS₂, MoS₂ deposited on Al₂O₃, potassium intercalated MoS₂ (K_0.33 H₂O_0.66 MoS₂), CdS and polycrystalline nickel phosphorus trisulfide (NiPS₃) have been investigated in the oxidation of sodium sulfide and Na₂S₂O₃. The phthalocyanine complexes and the metal chalcogenides do not catalyze, in the absence of light, the complete oxidation of the sulfide ion to sulfate ion. The final product of the catalytic oxidation is the formed thiosulfate. No oxidation of Na₂S₂O₃ has been registered in the dark in the presence of any of the catalytic samples. Their activity was enhanced upon irradiation with visible light. Thiosulfate appears to be the final product also of the photooxidation of the sulfide ion catalyzed by metal chalcogenides. They do not catalyze the further photooxidation of Na₂S₂O₃. The only photocatalysts which favour with their presence the oxidation of the sulfide and thiosulfate ions to sulfate ion, are the zinc phthalocyanine complexes. In this case, the photooxidation process involves singlet oxygen.     

Synthesis,characterization, and catalysis of recyclable new piperazine-bridged Mo(VI) polymers [MoO2(Salen)(piperazine)]n in highly selective oxygenation of alkenes and sulfides

This study reports synthesis and characterization of polymeric [MoO₂(Salen)] complexes that combine MoO₂(acac)₂ and polymeric ligands bearing N₂O₂ coordination sites, abbreviated herein as [piperazinCH₂{MoO₂(Salen)}]_n (6), [piperazinCH₂{MoO₂(Salophen)}]_n (7), and [piperazinCH₂{MoO₂(Salpn)}]_n (8). The epoxidation of alkenes using tert-butyl hydroperoxide and oxidation of sulfides to sulfoxides by urea hydrogen peroxide were enhanced with excellent selectivity under the catalytic influence of these coordination polymers. No relevant difference in activity was found due to change in the diamine in the Schiff’s base ligands. The stability of polymeric catalysts was assessed by recycling a sample five times in small batch reactions in both epoxidation and sulfoxidation. In the case of cyclooctene epoxidation, catalytic activity of [piperazinCH₂{MoO₂(Salen)}]_n increased without losing the selectivity, whereas the catalytic activity and selectivity of the spent catalyst decreased in sulfoxidation of methyl phenyl sulfide in consecutive runs. Loss of Mo from the coordination polymer has been investigated using the filtrates as potential catalysts in sulfoxidation reactions. Molybdenum leaching degree decreases through five cycles. Moreover, the catalyst can be recovered from the reaction mixture unchanged as determined by IR and UV–Vis spectra.     

Solid Phase Catalytic Oxidation of Alcohols by Polymer Supported Rare Earth Catalysts

Oxidation of alcohols to the corresponding aldehydes or ketones is one of the most fundamental reactions in organic chemistry [1,2]. Some of the products of the oxidation exhibit an important role in the organic synthesis as well as pharmaceutical synthesis. In most reactions, the lanthanide complexes show satisfied catalytic activities for some compounds. Furthermore, there has been increasing interest in the lanthanide complexes and several reports have appeared in the literature [3, 4]. But the exploitation of these complexes for the oxidation of some organic substrates has been limited. Here we reported a method for the preparation and the catalytic properties as well as the recycling of lanthanide complexes in oxidation of alcohols.The synthetic procedure for the polymer supported lanthanide complexes is shown as following(scheme 1):●-NH2+CICH2COOH(C2Hs)3N→●-NHCH2COOHM=Ce(Ⅲ), Tb(Ⅲ), Sm(Ⅲ)scheme 1The oxidation of benzyl alcohol was carried out in the presence of iodosylbenzene by the polymer supported Ce(Ⅲ), Tb(Ⅲ) and Sm(Ⅲ) catalysts at 80℃ for 4.0h, the yields of benz-aldehyde are as following (table 1):Table 1 Oxidation of benzyl alcohol with the supported catalysts**Reaction condition: benzyl alcohol 0.1 mmol, iodosylbenzene 0.15mmol,catalyst 0.2mg, 80℃ for 4.0h in 1,2-dichloroethane.It can be seen from the table that the Tb(Ⅲ) complex shows higher catalytic activity for the oxidation of benzyl alcohol. Further investigation is now being carded on to optimize the results.     

PREPARATION AND CATALYTIC BEHAVIOUR OF POLYMER-BOUND METALLOPORPHYRIN IN HYDROGENATION OF OLEFIN

The meso- tetraarylporphyrin has been anchored to styrene- divinylbenzenecopolymers by reaction of meso- tetra (4-hydroxylphenyl ) porphyrin with chloromethylatedresin under mild condition. A number of polymer transition metal complexes have beenprepared with the polymer ligand and metal salts. The polymeric ligand and its complexeshave been characterized by electronic spectra, and vibrational spectra. Cyclohexene can behydrogenated with the polymeric porphyrin palladium complex(P-THPPPd) as catalyst,and its catalytic activity was influenced by the polarity of solvents, the contents of water inethanol or reaction temperature. However, its catalytic activity was lower for nitro groups,carbonyl groups and olefins with steric hindrance substituents, and showed no activity foraromatic rings under these conditions.     

Alternating copolymerization of carbon dioxide and propylene oxide under bifunctional cobalt salen complexes: Role of Lewis base substituent covalent bonded on salen ligand

Alternating copolymerization of propylene oxide (PO) and carbon dioxide (CO₂) was realized under mild conditions with a moderate turnover frequency (TOF), employing sole bifunctional cobalt salen complexes containing Lewis acid metal center and covalent bonded Lewis base on the ligand. Variation of the covalent bonded Lewis base substituents on the salen ligands could tailor the catalytic activity with TOF changing from 19.3 to 34.9 h^?1, polymeric/cyclic carbonate selectivity from 95.3 to 72.8%, and the head‐to‐tail structure in the polymer from 72.2 to 86.0%. The IR analysis confirmed that the Lewis base moiety on one molecule could coordinate with cobalt center of adjacent molecule, playing similar role to the Salen metal complex/Lewis base binary catalytic system. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 359–365, 2010     

链状Salen型高分子席夫碱金属配合物的合成及表征

以对苯二甲酰氯为交联剂,利用界面聚合法合成了链状Salen型高分子席夫碱金属配合物PLSBM(M:CoⅡ,MnⅡ,ZnⅡ,CuⅡ),通过元素分析、红外光谱(FT-IR)、扫描电镜(SEM)、电感耦合等离子原子发射光谱(ICP-AES)和X射线光电子能谱(XPS)对结构进行了表征,发现PLSBM呈不规则的链状结构,配位金属离子与配体形成了稳定的配合物后金属离子的结合能增加了0.5～2.1eV。     

Polymeric Heterogeneous Catalysts of Transition‐Metal Oxides: Surface Characterization,Physicomechanical Properties,and Catalytic Activity

We investigate the physicomechanical properties of polymeric heterogeneous catalysts of transition‐metal oxides, specifically, the specific surface area, elongation at break, breaking strength, specific electrical resistance, and volume resistivity. Digital microscopy, Fourier‐transform infrared spectroscopy, X‐ray diffraction, scanning electron microscopy, and energy‐dispersive analysis are used to study the surfaces of the catalysts. The experimental results show that polymeric heterogeneous catalysts of transition‐metal oxides exhibit high stability and can maintain their catalytic activity under extreme reaction conditions for long‐term use. The oxidation mechanism of sulfur‐containing compounds in the presence of polymeric heterogeneous catalysts of transition‐metal oxides is confirmed. Microstructural characterization of the catalysts is performed by using X‐ray computed tomography. The activity of various catalysts in the oxidation of sulfur‐containing compounds is determined. We demonstrate the potential application of polymeric heterogeneous catalysts of transition‐metal oxides in industrial wastewater treatment.