锂金属电池研究中对称电池的短路现象

锂金属是具有高能量密度的负极材料,是下一代高能量密度电池研究的重点。在锂金属负极的改性研究中,锂对称电池是最常用的测试对象,但判断其短路的依据尚未统一,因此存在部分对短路数据的解析错误。本文利用原位电池对锂沉积过程中由于枝晶生长导致的短路现象进行了描述,对锂金属对称电池在充放电过程中的短路现象进行了分类和讨论。通过区分硬短路、软短路及电池活化过程,提出了判断锂对称电池中枝晶生长及电池短路的依据,为判定锂金属负极改性方法的有效性提供参考。     

In-situ polymerized carbonate induced by Li-Ga alloy as novel artificial interphase on Li metal anode

Li metal is considered an ideal anode material because of its high theoretical capacity and low electrode potential. However, the practical usage of Li metal as an anode is severely limited because of inevitable parasitic side reactions with electrolyte and dendrites formation. At present, single-component artificial solid electrolyte interphase cannot simultaneously meet the multiple functions of promoting ion conduction, guiding lithium ion deposition, inhibiting dendrite growth, and reducing ...     

亲锂的三维二硫化锡@碳纤维布用于稳定的锂金属负极

金属锂由于其高的比容量,低的电极电势和轻质等特点被认为是下一代高能量密度锂金属二次电池负极材料的最佳选择。然而,充放电循环中不均匀的锂沉积会导致严重的体积变化和大量的锂枝晶形成,从而影响了电池的库伦效率甚至会带来严重的安全隐患。为此,本文设计了一种亲锂的三维二硫化锡@碳纤维布复合基底材料,并作为集流体将其应用于金属锂电池上。一者,高比表面积的三维碳纤维骨架可以适应充放电过程中的体积变化并且有效地降低局部电流密度,从而确保锂的均匀沉积。二者,表面修饰的SnS2层在锂沉积过程中可以形成Li-Sn合金界面层,诱导锂的沉积并降低过电势。最终,实验结果表明:使用所制备的复合集流体与金属锂搭配组成的半电池可以在5 mA·cm^-2的高电流密度下以>98%的库伦效率稳定循环100周以上。此外,在承载10 mAh·cm^-2的金属锂后,复合的锂负极无论是在对称电池还是与磷酸铁锂组装成的实际电池中,均可以在高的电流密度下实现稳定的循环。我们相信这一复合的集流体构建策略对于设计安全稳定的锂金属电池或器件具有重要意义。     

A Flexible Solid Electrolyte Interphase Layer for Long‐Life Lithium Metal Anodes

Lithium (Li) metal is a promising anode material for high‐energy density batteries. However, the unstable and static solid electrolyte interphase (SEI) can be destroyed by the dynamic Li plating/stripping behavior on the Li anode surface, leading to side reactions and Li dendrites growth. Herein, we design a smart Li polyacrylic acid (LiPAA) SEI layer high elasticity to address the dynamic Li plating/stripping processes by self‐adapting interface regulation, which is demonstrated by in situ AFM. With the high binding ability and excellent stability of the LiPAA polymer, the smart SEI can significantly reduce the side reactions and improve battery safety markedly. Stable cycling of 700 h is achieved in the LiPAA‐Li/LiPAA‐Li symmetrical cell. The innovative strategy of self‐adapting SEI design is broadly applicable, providing opportunities for use in Li metal anodes     

Nafion/Titanium Dioxide‐Coated Lithium Anode for Stable Lithium–Sulfur Batteries

Lithium–sulfur (Li–S) batteries have shown great potential as high energy‐storage devices. However, the stability of the Li metal anode is still a major concern. This is due to the formation of lithium dendrites and severe side reactions with polysulfide intermediates. We herein develop an anode protection method by coating a Nafion/TiO₂ composite layer on the Li anode to solve these problems. In this architecture, Nafion suppresses the growth of Li dendrites, protects the Li anode, and prevents side reactions between polysulfides and the Li anode. Moreover, doped TiO₂ further improves the ionic conductivity and mechanical properties of the Nafion membrane. Li–S batteries with a Nafion/TiO₂‐coated Li anode exhibit better cycling stability (776 mA h g^?1 after 100 cycles at 0.2 C, 1 C=1672 mA g^?1) and higher rate performance (787 mA h g^?1 at 2 C) than those with a pristine Li anode. This work provides an alternative way to construct stable Li anodes for high‐performance Li–S batteries.     

轻质三维多孔泡沫铝用作高性能锂金属负极骨架

将轻质、三维多孔且亲锂的泡沫铝用作锂(Li)金属负极骨架,通过简单的机械挤压方法,将泡沫铝与金属 Li复合,制得Al@Li复合负极。泡沫铝自身的高亲锂性,能够为Li金属成核提供丰富且均匀的活性位点,诱导Li在泡沫铝内部的快速成核和均匀电沉积。同时,泡沫铝的三维多孔结构,可以容纳Li金属负极在充放电过程中的巨大体积应变,降低局部电流密度,从而有效抑制Li枝晶的生长。因此,与纯Li金属负极相比,所获得的Al@Li复合负极在对称电池和LiFePO₄||Al@Li半电池中,均表现出了更加优异的循环稳定性。     

轻质三维多孔泡沫铝用作高性能锂金属负极骨架

将轻质、三维多孔且亲锂的泡沫铝用作锂(Li)金属负极骨架,通过简单的机械挤压方法,将泡沫铝与金属Li复合,制得Al@Li复合负极。泡沫铝自身的高亲锂性,能够为Li金属成核提供丰富且均匀的活性位点,诱导Li在泡沫铝内部的快速成核和均匀电沉积。同时,泡沫铝的三维多孔结构,可以容纳Li金属负极在充放电过程中的巨大体积应变,降低局部电流密度,从而有效抑制Li枝晶的生长。因此,与纯Li金属负极相比,所获得的Al@Li复合负极在对称电池和LiFePO₄||Al@Li半电池中,均表现出了更加优异的循环稳定性。     

电极界面浓差极化对锂金属沉积的影响

锂金属作为下一代高能量密度电池的理想负极材料受到研究人员广泛关注。然而,锂枝晶生长引起的安全隐患和循环寿命短等问题严重影响了锂金属电池的实用化进程。本文以电化学现象和理论为依据,从浓差极化角度详细分析锂金属电沉积过程中枝晶生长、死锂形成和全电池失效机制,并对目前研究较多的多孔宿主电极中的浓差极化及枝晶抑制进行分析,提出锂金属界面浓差电池现象。本文得到的结论为研究人员更深入地探究锂金属保护策略提供了理论依据。     

Functional lithiophilic polymer modified separator for dendrite-free and pulverization-free lithium metal batteries

Severe performance drop and fire risk due to the uneven lithium(Li) dendrite formation and growth during charge/discharge process has been considered as the major obstacle to the practical application of Li metal batteries.So inhibiting dendrite growth and producing a stable and robust solid electrolyte interface(SEI) layer are essential to enable the use of Li metal anodes.In this work,a functional lithiophilic polymer composed of chitosan(CTS),polyethylene oxide(PEO),and poly(triethylene glycol dimethacrylate)(PTEGDMA),was homogeneously deposited on a commercial Celgard separator by combining electrospraying and polymer photopolymerization techniques.The lithiophilic environment offered by the CTS-PEO-PTEGDMA layer enables uniform Li deposition and facilitates the formation of a robust homogeneous SEI layer,thus prevent the formation and growth of Li dendrites.As a result,both Li/Li symmetric cells and LiFePO4/Li full cells deliver significantly enhanced electrochemical performance and cycle life.Even after 1000 cycles,the specific capacity of the modified full cell could be maintained at65.8 mAh g^-1, twice which of the unmodified cell(32.8 mAh g^-1).The long-term cycling stability in Li/Li symmetric cells,dendrite-free anodes in SEM images and XPS analysis suggest that the pulverization of the Li anode was effectively suppressed by the lithiophilic polymer layer.     

Li-MOF-based ions regulator enabling fast-charging and dendrite-free lithium metal anode

Li metal has been regarded as the holy grail for the next-generation Li-ion battery. Li dendrites issues, however, impede its practical application. In general, prolonging the sand time of Li nucleation and regulating homogeneous Li⁺ flux are effective approaches to suppress the dendrites formation and growth. Regarding this view, a functional polypropylene (PP) separator is developed to regulate ion transportation via a newly designed Li-based metal-organic framework (Li-MOF) coating. The Li-MOF crystallizes in the orthorhombic space group P212121 and features a double-walled three-dimensional (3D) structure with 1D channels. The well-defined intrinsic nanochannels of Li-MOF and the steric-hinerance effect both restrict free migration of anions, contributing to a high Li⁺ transference number of 0.65, which improve the Sand time of Li nucleation. Meanwhile, the Li-MOF coating with uniform porous structure promotes homogeneous Li⁺ flux at the surface of Li metal. Furthermore, the Li-MOF coating layer helps to build solid-electrolyte interphase (SEI) layer that comprises of inorganic LiF and Li₃N, which further prohibits the dendrites growth. Consequently, a highly stable Li plating/stripping cycling for over 1000 h is achieved. The functional separator also enables high-performance full lithium metal cells, the high-rate and long-stable cycling performance of LiNi_0.8Mn_0.1Co_0.1 (NMC811)-Li and LiCoO₂ (LCO)-Li cells further demonstrate the feasibility of this concept.     

利用原位氟化保护层改善三维锡锂合金/碳纸负极贫电解液下性能

金属锂具有最高的理论比容量(3860 mAh·g^?1)和最低的还原电势(?3.04 V),是新型高能量密度电池负极材料的最佳选择之一。然而由于金属锂负极表面自发生成的固态电解质界面(SEI)十分不稳定,导致锂枝晶的产生和电池容量快速衰减,严重限制了锂金属电池的商业化应用。因此,本工作利用碳酸双(2,2,2-三氟乙基)酯(DTFEC)添加剂在三维锡锂合金/碳纸负极(SnLi/Cp)表面原位构筑了高机械强度和离子穿透性的含氟化物(LiF和SnF2)保护层,有效地改善了锂负极的倍率性能和循环稳定性。结果显示,SnLi/Cp对称电池在8 mA·cm^?2的电流密度下经过100次循环后过电位仅为90 mV。当将电解液降低到12μL(1.5μL·(mAh)?1)时,在5 mA·cm^?2的电流密度下对称电池仍具有优异的稳定性;SnLi/Cp||NMC811电池在1C(1.5 mA·cm^?2)条件下能稳定循环300圈以上,库伦效率高达98.1%。这种方法能够显著改善锂金属负极的循环稳定性,有助于实现高能量密度锂金属电池的实际应用。     

An Interfacial Layer Based on Polymers of Intrinsic Microporosity to Suppress Dendrite Growth on Li Metal Anodes

The performance and safety of lithium (Li) metal batteries can be compromised owing to the formation of Li dendrites. Here, the use of a polymer of intrinsic microporosity (PIM) is reported as a feasible and robust interfacial layer that inhibits dendrite growth. The PIM demonstrates excellent film-forming ability, electrochemical stability, strong adhesion to a copper metal electrode, and outstanding mechanical flexibility so that it relieves the stress of structural changes produced by reversible lithiation. Importantly, the porous structure of the PIM, which guides Li flux to obtain uniform deposition, and its strong mechanical strength combine to suppress dendrite growth. Hence, the electrochemical performance of the anode is significantly enhanced, promising excellent performance and extended cycle lifetime for Li metal batteries.     

Facile Generation of Polymer–Alloy Hybrid Layers for Dendrite‐Free Lithium‐Metal Anodes with Improved Moisture Stability

Lithium‐metal anodes are recognized as the most promising next‐generation anodes for high‐energy‐storage batteries. However, lithium dendrites lead to irreversible capacity decay in lithium‐metal batteries (LMBs). Besides, the strict assembly‐environment conditions of LMBs are regarded as a challenge for practical applications. In this study, a workable lithium‐metal anode with an artificial hybrid layer composed of a polymer and an alloy was designed and prepared by a simple chemical‐modification strategy. Treated lithium anodes remained dendrite‐free for over 1000 h in a Li–Li symmetric cell and exhibited outstanding cycle performance in high‐areal‐loading Li–S and Li–LiFePO₄ full cells. Moreover, the treated lithium showed improved moisture stability that benefits from the hydrophobicity of the polymer, thus retaining good electrochemical performance after exposure to humid air.     

Three-Dimensional Graphene/Ag Aerogel for Durable and Stable Li Metal Anodes in Carbonate-Based Electrolytes

The use of Li metal as the anode for Li-based batteries has attracted considerable attention due to its ultrahigh energy density. However, the formation of Li dendrites, uneven deposition, and huge volume changes hinder its reliable implementation. These issues become much more severe in commercial carbonate-based electrolytes than in ether-based electrolytes. Herein, a rationally designed three-dimensional graphene/Ag aerogel (3D G-Ag aerogel) is proposed for Li metal anodes with long cycle life in carbonate-based electrolytes. The modified lithiophilic nature of G-Ag aerogel, realized through decoration with Ag NPs, effectively decreases the energy barrier for Li nucleation, regulating uniform Li deposition behavior. Moreover, the highly flexible, conductive 3D porous architecture with hierarchical mesopores and macropores can readily accommodate deposited Li and ensures the integrity of the conductive network during cycling. Consequently, high coulombic efficiency (over 93.5 %) and a significantly long cycle life (1589 h) over 200 cycles, with a relatively high cycling capacity of 2.0 mAh cm⁻², can easily be achieved, even in a carbonate-based electrolyte. Considering the intrinsic high voltage windows of carbonate-based electrolytes, matching the G-Ag aerogel Li metal anode with a high-voltage cathode can be envisaged for the fabrication of high-energy-density Li secondary batteries.     

Double‐Shelled C@MoS2 Structures Preloaded with Sulfur: An Additive Reservoir for Stable Lithium Metal Anodes

The growth of Li dendrites hinders the practical application of lithium metal anodes (LMAs). In this work, a hollow nanostructure, based on hierarchical MoS₂ coated hollow carbon particles preloaded with sulfur (C@MoS₂/S), was designed to modify the LMA. The C@MoS₂ hollow nanostructures serve as a good scaffold for repeated Li plating/stripping. More importantly, the encapsulated sulfur could gradually release lithium polysulfides during the Li plating/stripping, acting as an effective additive to promote the formation of a mosaic solid electrolyte interphase layer embedded with crystalline hybrid lithium‐based components. These two factors together effectively suppress the growth of Li dendrites. The as‐modified LMA shows a high Coulombic efficiency of 98 % over 500 cycles at the current density of 1 mA cm^?2. When matched with a LiFePO₄ cathode, the assembled full cell displays a highly improved cycle life of 300 cycles, implying the feasibility of the proposed LMA.     

Protection of Li metal anode by surface-coating of PVDF thin film to enhance the cycling performance of Li batteries

The PVDF thin film on the surface of the lithium metal can highly suppress the lithium dendrites.     

Porous inorganic filler Li4.7Ag1.63GeS4.8 in PEO electrolyte effectively inhibits Li dendrites for all-solid-state Li metal batteries

The newly created porous inorganic particles Li_4.7Ag_1.63GeS_4.8 as filler are added into poly (ethylene oxide) (PEO) with LiTFSI salt, which greatly improves the electrochemical stability of solid-state PEO-based electrolytes against Li metal in a working battery. Due to many pores and channels in the filler, Li dendrites would grow along these channels thereby effectively inhibiting their fast spread in PEO matrix and retarding the short circuit on account of the penetration of Li dendrite. The Li⁺ conductivity of this solid-state electrolyte membrane could be 1.36 × 10^-4 S/cm at 40 °C. The fabricated symmetrical Li metal cells could cycle above 550 h at 0.05 mA/cm² and corresponding LiFePO₄/Li all-solid-state cells have an excellent cycling stability of 160.65 mAh g^-1 specific capacity after 200 cycles with 99.93% columbic efficiency at 50 °C environment.     

石榴石固体电解质Li3BO3界面改性研究

石榴石固体电解质由于其高的离子电导率,对锂金属稳定等优点成为了下一代高性能锂电池的重要研究方向之一。但锂金属负极界面浸润性与锂枝晶问题限制了其应用。本文通过简单的液相沉积结合高温烧结的方法,在石榴石固体电解质片表面构建了一层稳定的硼酸三锂(Li₃BO₃)修饰层。研究表明,Li₃BO₃修饰层可以有效改善石榴石固体电解质与锂金属负极界面接触,促进锂的均匀沉积/溶出,从而抑制锂枝晶生长,提高界面稳定性。Li₃BO₃修饰后石榴石电解质片与锂金属之间紧密结合,Li/石榴石界面阻抗由修饰前的1780 Ω·cm²降低至58 Ω·cm²。得益于界面接触的改善,Li₃BO₃修饰后的LLZTO电解质组装的对称电池可以在0.1 m·cm^-2的电流密度下稳定工作超过700 h。而未修饰的对称电池在0.05 mA·cm^-2的电流密度下短时间工作即出现微短路现象。     

锂金属负极的挑战与改善策略研究进展

锂金属由于其高比容量和低电极电势等优点被认为是下一代高比能量电池体系中最有潜力的负极材料。然而由于锂金属的高活性,锂负极在循环过程中会产生大量的枝晶,导致SEI(solid-electrolyte interphase)破裂,并且枝晶增加了电极与电解液的接触面积,使得副反应进一步增加。此外,脱落的枝晶形成死锂,从而降低电池的充放电库仑效率。并且不可控的锂枝晶持续生长会刺穿隔膜引发电池短路,伴随着电池热失控等安全问题。本综述基于锂负极存在的主要挑战,结合理解锂枝晶的成核生长模型等机理总结并深度分析近些年来在液态和固态电解质体系中改善锂金属负极的主要策略及其作用机理,为促进高比能量锂金属电池的应用提供借鉴参考作用。     

Stabilizing Lithium Plating by a Biphasic Surface Layer Formed In Situ

The dendritic growth of Li metal leads to electrode degradation and safety concerns, impeding its application in building high energy density batteries. Forming a protective layer on the Li surface that is electron‐insulating, ion‐conducting, and maintains an intimate interface is critical. We herein demonstrate that Li plating is stabilized by a biphasic surface layer composed of a lithium‐indium alloy and a lithium halide, formed in situ by the reaction of an electrolyte additive with Li metal. This stabilization is attributed to the fast lithium migration though the alloy bulk and lithium halide surface, which is enabled by the electric field across the layer that is established owing to the electron‐insulating halide phase. A greatly stabilized Li‐electrolyte interface and dendrite‐free plating over 400 hours in Li|Li symmetric cells using an alkyl carbonate electrolyte is demonstrated. High energy efficiency operation of the Li₄Ti₅O₁₂ (LTO)|Li cell over 1000 cycles is achieved.