表面羧基化Fe3O4磁性纳米粒子的快捷制备及表征

亲水性磁性纳米颗粒在生物科学领域有着广泛应用,本研究提出了一种快速对磁性纳米粒子表面进行羧基化的方法. 首先使用氯化铁和氯化亚铁为原料, 以油酸为表面活性剂, 通过共沉淀法制得油酸包覆的亲油性磁性纳米粒子, 然后用高锰酸钾进行原位氧化, 将覆盖在粒子表面的油酸中的C＝C键氧化成-COOH, 从而得到单层羧基功能化的亲水性磁性纳米粒子. 利用透射电镜(TEM)、X射线衍射(XRD)、傅利叶红外光谱仪(FT-IR)、热重分析仪(TGA)、振动样品磁强计(VSM)、Zeta电位分析仪等对其进行表征. 结果表明磁性纳米粒子表面被成功羧基化,粒子的平均直径约为9 nm,饱和磁化值为64.5 emu/g,剩磁和矫顽力近似为零,具有典型的超顺磁性. 羧基化磁性纳米粒子可在pH7-10的水溶液中形成稳定分散的磁流体,保存6周无沉淀出现.     

Optimal design and characterization of superparamagnetic iron oxide nanoparticles coated with polyvinyl alcohol for targeted delivery and imaging

Superparamagnetic iron oxide nanoparticles (SPION) with narrow size distribution and stabilized by polyvinyl alcohol (PVA) were synthesized. The particles were prepared by a coprecipitation technique using ferric and ferrous salts with a molar Fe3+/Fe2+ ratio of 2. Using a design of experiments (DOE) approach, the effect of different synthesis parameters (stirring rate and base molarity) on the structure, morphology, saturation magnetization, purity, size, and size distribution of the synthesized magnetite nanoparticles was studied by various analysis techniques including X-ray powder diffraction (XRD), thermogravimetric analysis (TGA) with differential scanning calorimetry (DSC) measurements, vibrating-sample magnetometer (VSM), transmission electron microscopy (TEM), UV-visible, and Fourier transform infrared (FT-IR) spectrometer. PVA not only stabilized the colloid but also played a role in preventing further growth of SPION followed by the formation of large agglomerates by chemisorption on the surface of particles. A rich behavior in particle size, particle formation, and super paramagnetic properties is observed as a function of molarity and stirring conditions. The particle size and the magnetic properties as well as particle shape and aggregation (individual nanoparticles, magnetic beads, and magnetite colloidal nanocrystal clusters (CNCs) are found to be influenced by changes in the stirring rate and the base molarity. The formation of magnetic beads results in a decrease in the saturation magnetization, while CNCs lead to an increase in saturation magnetization. On the basis of the DOE methodology and the resulting 3-D response surfaces for particle size and magnetic properties, it is shown that optimum regions for stirring rate and molarity can be obtained to achieve coated SPION with desirable size, purity, magnetization, and shape.     

Effect of surface modification on magnetization of iron oxide nanoparticle colloids

Magnetic iron oxide nanoparticles have numerous applications in the biomedical field, some more mature, such as contrast agents in magnetic resonance imaging (MRI), and some emerging, such as heating agents in hyperthermia for cancer therapy. In all of these applications, the magnetic particles are coated with surfactants and polymers to enhance biocompatibility, prevent agglomeration, and add functionality. However, the coatings may interact with the surface atoms of the magnetic core and form a magnetically disordered layer, reducing the total amount of the magnetic phase, which is the key parameter in many applications. In the current study, amine and carboxyl functionalized and bare iron oxide nanoparticles, all suspended in water, were purchased and characterized. The presence of the coatings in commercial samples was verified with X-ray photoelectron spectroscopy (XPS). The class of iron oxide (magnetite) was verified via Raman spectroscopy and X-ray diffraction. In addition to these, in-house prepared iron oxide nanoparticles coated with oleic acid and suspended in heptane and hexane were also investigated. The saturation magnetization obtained from vibrating sample magnetometry (VSM) measurements was used to determine the effective concentration of magnetic phase in all samples. The Tiron chelation test was then utilized to check the real concentration of the iron oxide in the suspension. The difference between the concentration results from VSM and the Tiron test confirmed the reduction of magnetic phase of magnetic core in the presence of coatings and different suspension media. For the biocompatible coatings, the largest reduction was experienced by amine particles, where the ratio of the effective weight of magnetic phase reported to the real weight was 0.5. Carboxyl-coated samples experienced smaller reduction with a ratio of 0.64. Uncoated sample also exhibits a reduction with a ratio of 0.6. Oleic acid covered samples show a solvent-depended reduction with a ratio of 0.5 in heptane and 0.4 in hexane. The corresponding effective thickness of the nonmagnetic layer between magnetic core and surface coating was calculated by fitting experimentally measured magnetization to the modified Langevin equation.     

Relaxometric and magnetic characterization of ultrasmall iron oxide nanoparticles with high magnetization. Evaluation as potential T1 magnetic resonance imaging contrast agents for molecular imaging

Here we report on the synthesis of ultrasmall gamma-Fe2O3 nanoparticles (5 nm) presenting a very narrow particle size distribution and an exceptionally high saturation magnetization. The synthesis has been carried out by decomposition of an iron organometallic precursor in an organic medium. The particles were subsequently stabilized in an aqueous solution at physiological pH, and the colloidal dispersions have been thoroughly characterized by complementary techniques. Particular attention has been given to the assessment of the mean particle size by transmission electron microscopy, X-ray diffraction, dynamic light scattering, magnetic, and relaxometric measurements. The good agreement found between the different techniques points to a very narrow particle size distribution. Regarding the magnetic properties, the particles are superparamagnetic at room temperature and present an unusually high saturation magnetization value. In addition, we describe the potential of these particles as specific positive contrast agents for magnetic resonance molecular imaging.     

Synthesis of magnetic chelator for high-capacity immobilized metal affinity adsorption of protein by cerium initiated graft polymerization

A novel magnetic chelator with high adsorption capacity of protein by immobilized metal affinity adsorption was prepared by cerium (IV) initiated graft polymerization of tentacle-type polymer chains with iminodiacetic acid (IDA) chelating group on magnetic particles with hydroxyl groups. The micron-sized magnetic poly(vinyl acetate-divinylbenzene) (PVAc-DVB) particles were prepared by a modified suspension polymerization in the presence of oleic acid-coated magnetite nanoparticles and subsequently modified by ester exchange reaction to introduce functional hydroxyl groups. Bovine hemoglobin (BHb) was selected as a model protein to investigate the adsorption capacity of these magnetic particles. The magnetic particles were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), superconducting quantum interference device (SQUID) magnetometry, diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and X-ray diffraction (XRD). The results showed that the magnetic particles had an average size of 5 microm and superparamagnetism with saturation magnetization of 20.0 emu/g at room temperature. The protein adsorption indicated that the graft polymerization of tentacle type polymer chains on the magnetic particles could produce magnetic adsorbents with high adsorption capacity (1428.21 mg/g) and low nonspecific adsorption of protein. The magnetic particles with grafted tentacle polymer chains have potential application in large-scale affinity separation of proteins.     

Methylene blue-containing silica-coated magnetic particles: a potential magnetic carrier for photodynamic therapy

We present the preparation and characterization of methylene blue-containing silica-coated magnetic particles. The entrapment of methylene blue (MB), a photodynamic therapy drug under study in our group, in the silica matrix took place during the growth of a silica layer over a magnetic core composed of magnetite nanoparticles. The resulting material was characterized by transmission electron microscopy (TEM), light scattering, and X-ray diffraction. It is composed of approximately 30 nm silica spheres containing magnetic particles of 11 +/- 2 nm and methylene blue entrapped in the silica matrix. The immobilized drug can generate singlet oxygen, which was detected by its characteristic phosphorescence decay curve in the near-infrared and by a chemical method using 1,3-diphenylisobenzofuran to trap singlet oxygen. The lifetime of singlet oxygen was determined to be 52 micros (in acetonitrile) and 3 micros (in water), with both values being in good agreement with those in the literature. The release of singlet oxygen (etaDelta) was affected by the encapsulation of MB in the silica matrix, which caused a reduction to 6% of the quantum yield of MB free in solution. The magnetization curve confirmed the superparamagnetic behavior with a reduced saturation magnetization in respect to uncoated magnetic nanoparticles, which is consistent with the presence of a diamagnetic component over the magnetite surface. The result is a single particle platform that combines therapy (photosensitizer) and diagnostic (MRI contrast agent) possibilities at the same time, as well as drug targeting.     

离子型钴铁氧体磁流体的稀土改性与机理研究

Rare earth composite cobalt ferrite ionic magnetic fluids were prepared by precipitation in the presence of Tri-sodium citrate. The sample phase, structure and particle sizes were determined by X-ray diffraction transmission and electron microscopy. It is clear that the particles appear as variously sized balls, Cobalt ferrite with sizes of 12-15 nm, Dysprosium cobalt ferrite and Yttrium cobalt ferrite with sizes of 6-8 nm. By adding rare earth ions, the average diameter of the magnetic nanoparticles was decreased. The decrease in diameter was explained using a micro-model of rare earth modification. The effect of rare earth ion modification on the saturation magnetization and magnetic induction of magnetic fluids was carried out using a Gouy magnetic balance and a spectrophotometer. The result shows that saturation magnetization and magnetic induction can be improved by adding Dy3+. By adding Y3+, magnetic induction was increased. However, the saturation magnetization then decreased. A theory of the mechanism of rare earth ion modification is discussed in detail.     

Magnetic core-shell fluorescent pH ratiometric nanosensor using a Stöber coating method

We describe the use of a modified St?ber method for coating maghemite (γ-Fe(2)O(3)) nanocrystals with silica shells in order to built magnetic fluorescent sensor nanoparticles in the 50-70nm diameter range. In detail, the magnetic cores were coated by two successive silica shells embedding two fluorophores (two different silylated dye derivatives), which allows for ratiometric pH-measurements in the pH range 5-8. Silica coated magnetic nanoparticles were prepared using maghemite nanocrystals as cores (5-10nm in diameter) coated by tetraethoxyorthosilicate via hydrolysis/condensation in ethanol, catalyzed by ammonia. In the inner shell was covalently attached a sulforhodamine B, which was used as a reference dye; while a pH-sensitive fluorescein was incorporated into the outer shell. Once synthesized, the particles were characterized in terms of morphology, size, composition and magnetization, using dynamic light scattering (DLS), transmission electron microscopy (TEM), X-ray diffraction (XRD) and vibrating sample magnetometry (VSM). TEM analysis showed the nanoparticles to be very uniform in size. Wide-angle X-ray diffractograms showed, for uncoated as well as coated nanoparticles, typical peaks for the spinel structure of maghemite at the same diffraction angle, with no structural changes after coating. When using VSM, we obtained the magnetization curves of the resulting nanoparticles and the typical magnetization parameters as saturation magnetization (M(s)), coercivity (H(c)), and remanent magnetization (M(r)). The dual-dye doped magnetic-silica nanoparticles showed a satisfactory magnetization that could be suitable for nanoparticle separation and localized concentration of them. Changes in fluorescence intensity of the pH indicator in the different pH buffered solutions were observed within few seconds indicating an easy accessibility of the embedded dye by protons through the pores of the silica shell. The relationship between the ratio in fluorescence (sensor/reference dyes) and pH was adjusted to a sigmoidal fit using a Boltzmann type equation. Finally, the proposed method was statistically validated against a reference procedure using samples of water and physiological buffer with 2% (w/v) of horse serum added, indicating that there are no significant statistical differences at a 95% confidence level.     

一种便捷方法制备表面氨基化的超顺磁Fe3O4纳米粒子

提出了一种简便易行的对磁性纳米粒子表面进行氨基化的方法. 首先使用化学共沉淀法合成了粒径为10 nm左右的Fe3O4纳米粒子, 然后用阿仑膦酸钠对其表面进行修饰, 使其表面具有了功能化的氨基. 利用透射电子显微镜(TEM)、X射线衍射(XRD)、振动样品磁强计(VSM)、动态光散射(DLS)仪、热重分析(TGA)仪、傅里叶变换红外(FT-IR)光谱仪、X射线光电子能谱(XPS)仪等对其进行表征. 结果显示磁性纳米粒子表面被成功地修饰了一层双膦酸分子. 所制备的纳米粒子可在pH=6.3稳定存在4周以上.     

Synthesis and Electro-magnetic Properties of Polyaniline-barium Ferrite Nanocomposite

"The polyaniline (PANI)-barium ferrite composite with magnetic behavior was synthesized by in situ poly-merization of aniline in the presence of BaFe12O19 nanoparticles of 60-80 nm in diameters. The structure, morphology and magnetic properties of samples were characterized by powder X-ray diffraction, Fourier transform infrared, scanning electron microscopy, transmission electron microscopy and vibrating sample magnetometer technique. The results of spectroanalysis indicated that there was interaction between PANIchains and ferrite particles. The composite exhibited the hysteresis loops of the ferromagnetic nature. The saturated magnetization of composite was 22.2 emu/g and the conductance was 0.069 S/cm."     

Monodisperse superparamagnetic nanoparticles by thermolysis of Fe(III) oleate and mandelate complexes

Monodisperse superparamagnetic iron oxide nanoparticles of controlled size were synthesized by thermal decomposition of organic iron compounds in different high-boiling solvents in the presence of oleic acid and/or oleylamine. The compounds included Fe(III) oleate and mandelate, formed from FeCl₃ and the respective acids. The size of the nanoparticles was easily tuned to 8–27 nm by varying the experimental conditions. The nanoparticles were characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM), and magnetization measurements. The hydrophobic coating of the particles was analyzed by thermogravimetric analysis (TGA) and atomic absorption spectroscopy (AAS). To make the particles biocompatible and water dispersible, nontoxic hydrophilic poly(ethylene glycol) derivatives were synthesized and used for phase transfer of hydrophobic particles into water using a ligand-exchange procedure.     

High Coercivity Induced in Nickel Ferrite Nanoparticles by Mechanical Milling

This work reports a study of the structure and magnetic behavior of NiFe₂O₄ ferromagnetic oxide nanoparticles synthesized by the combustion method. The structural and magnetic properties of nanoparticles after mechanical milling are investigated by X-ray diffraction (XRD), Fourier transform infrared spectroscopy, transmission electron microscope. Their structural properties and magnetic behavior are characterized by a vibrating sample magnetometer (VSM). The non-milled sample presents a coercivity of 89 Oe, a saturation magnetization of 69 emu/g, and a remanence of 13 emu/g. After milling, the sample attains the coercivity, the saturation magnetization, and the remanence of 160.7 Oe, 56 emu/g, and 12.8 emu/g respectively. The porosity estimated from the X-ray density and bulk density is about 35%. The XRD analysis by Stokes–Wilson, Williamson-Hall, and dislocation density equations are used to estimate strain and the dislocation density induced by mechanical milling in the sample.     

聚苯胺钡铁氧体纳米复合材料的制备、表征及性能

采用原位掺杂聚合法, 将聚苯胺(PANI)对粒径在60~80 nm的M型钡铁氧体颗粒(BaFe12O19)进行了包覆, 得到了具有棒状结构的复合材料. 通过X射线衍射(XRD)、傅里叶变换红外光谱(FTIR)、扫描电子显微镜(SEM)和透射电子显微镜(TEM)等测试手段对材料的形貌和结构进行了表征. 结果表明, PANI链段与BaFe12O19颗粒之间存在作用力. 使用振动磁强计和四探针法测定了复合材料的磁性能与电性能后发现, 饱和磁化强度与矫顽力均随聚苯胺含量的增加呈规律性下降趋势, 而电导率呈上升趋势. 复合材料的吸收特性测试结果表明, 该材料反射率小于-20 dB时, 带宽可以达到15.07 GHz. 同时详细地讨论了纳米复合材料的聚合机理及相互作用.     

Design and synthesis of novel magnetic core-shell polymeric particles

A novel synthetic strategy was developed for the preparation of magnetic core-shell (MCS) particles consisting of hydrophobic poly(methyl methacrylate) cores with hydrophilic chitosan shells and gamma-Fe2O3 nanoparticles inside the cores via copolymerization of methyl methacrylate from chitosan in the presence of vinyl-coated gamma-Fe2O3 nanoparticles. The magnetic core-shell particles were characterized with transmission electron microscopy, field-emission scanning electron microscopy, particle size and zeta-potential measurements, vibrating sample magnetometry, and atomic force microscopy, respectively. The MCS particles were less than 200 nm in diameter with a narrow size distribution (polydispersity = 1.09) and had a good colloidal stability (critical coagulation concentration = 1.2 M NaCl at pH 6.0). Magnetization study of the particles indicated that they exhibited superparamagnetism at room temperature and had a saturation magnetization of 2.7 A m2/kg. The MCS particles were able to form a continuous film on a glass substrate, where magnetic nanoparticles could evenly disperse throughout the film. Thus, these new materials should be extremely useful in various applications.     

Preparation of fluoroalkyl end-capped oligomers/magnetite nanocomposites possessing a good dispersibility and stability

Fluoroalkyl end-capped vinylphosphonic acid cooligomers-encapsulated magnetite nanocomposites were prepared by the magnetization of aqueous ferric and ferrous ions in the presence of the corresponding fluorinated cooligomers and magnetic nanoparticles under alkaline conditions. These fluorinated cooligomers magnetic composites are nanometer size-controlled very fine particles and have a good dispersibility and stability in water and traditional organic solvents. These fluorinated nanocomposites were also applied to the surface modification of poly(methyl methacrylate) to exhibit a good oleophobicity imparted by fluorine on their surface. Fluoroalkyl end-capped 2-methacryloyloxyethanesulfonic acid oligomer-encapsulated magnetite nanocomposites and fluoroalkyl end-capped 2-acrylamide-2-methylpropanesulfonic acid oligomer-encapsulated magnetite nanocomposites were prepared in good isolated yields by the magnetization of iron chlorides in the presence of the corresponding oligomers and magnetic nanoparticles under similar conditions. Colloidal stability of these fluorinated nanocomposites thus obtained in water was demonstrated to become extremely higher than that of fluorinated vinylphosphonic acid cooligomers/magnetic nanocomposites.     

Magnetic Polymer Composite Particles Via In situ Inverse Miniemulsion Polymerization Process

We aimed at preparing magnetic iron oxide particles by the oxidation-precipitation method in order to encapsulate these particles in polymer matrices composed of poly(acrylamide-styrene sulfonic acid sodium salt). Nanocomposites were synthesized by the incorporation of surface treated magnetic nanoparticles in the synthesized polymers via in situ inverse mini-emulsion polymerization process. The study parameter was the ionic monomer content in the synthesized polymers. The structure and the morphology of the magnetic nanogels were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), dynamic light scattering (DLS), thermal gravimetric analysis (TGA) and scanning electron microscopy (SEM). FTIR and XRD showed that pure magnetite was formed and successfully encapsulated in the composite nanoparticles. The polymer encapsulation could reduce the susceptibility to leaching and could protect the magnetite particle surfaces from oxidation. The ionic monomer content had a great effect on the magnetization behavior. Magnetite prepared by the oxidation precipitation method, of 50 nm mean particle size, was embedded successfully into the polymer nanogels with a reasonable magnetic response, as proved by vibrating sample magnetometer measurement. Magnetic nanocomposites were proven to be super-ferromagnetic materials.     

Alignment of carbon nanotubes under low magnetic fields through attachment of magnetic nanoparticles

The alignment of multiwalled carbon nanotubes (MWNTs) has been accomplished through deposition of uniform layers of magnetite/maghemite nanoparticles (diameter = 6-10 nm) and use of an external magnetic field. The coating of CNTs with magnetic nanoparticles was performed by combining the polymer wrapping and layer-by-layer (LbL) assembly techniques. The particle-coated MWNTs are superparamagnetic and can be aligned at room temperature on any substrate by deposition from an aqueous solution in an external field B = 0.2 T. The volume magnetization of the particle coated MWNTs is found to be enhanced by 17% compared to the pure particles in a powder indicating that either the adsorption process onto the CNTs changes the particle magnetization, or the MWNTs carry an intrinsic magnetization due to remaining Ni used as a catalyst for the growth process.     

Thermal Plasma Synthesis of Superparamagnetic Iron Oxide Nanoparticles

Superparamagnetic iron oxide nanoparticles were synthesized by injecting ferrocene vapor and oxygen into an argon/helium DC thermal plasma. Size distributions of particles in the reactor exhaust were measured online using an aerosol extraction probe interfaced to a scanning mobility particle sizer, and particles were collected on transmission electron microscopy (TEM) grids and glass fiber filters for off-line characterization. The morphology, chemical and phase composition of the nanoparticles were characterized using TEM and X-ray diffraction, and the magnetic properties of the particles were analyzed with a vibrating sample magnetometer and a magnetic property measurement system. Aerosol at the reactor exhaust consisted of both single nanocrystals and small agglomerates, with a modal mobility diameter of 8?C9?nm. Powder synthesized with optimum oxygen flow rate consisted primarily of magnetite (Fe₃O₄), and had a room-temperature saturation magnetization of 40.15 emu/g, with a coercivity and remanence of 26 Oe and 1.5 emu/g, respectively.     

Synthetic control over magnetic moment and exchange bias in all-oxide materials encapsulated within a spherical protein cage

This work focuses on the synthetic control of magnetic properties of mixed oxide magnetic nanoparticles of the general formula Fe(3-x)Co(x)O(4) (x < or = 0.33) in the protein cage ferritin. In this biomimetic approach, variations in the chemical synthesis result in the formation of single-phase Fe(3-x)Co(x)O(4) alloys or intimately mixed binary phase Fe/Co oxides, modifying the chemical structure and magnetic behavior of these particles, as characterized by static and dynamic magnetization measurements and X-ray absorption spectroscopy.     

Co~(2+)/Dy~(3+)掺杂纳米立方Fe_3O_4的热还原制备及磁靶向滞留性能

采用热还原沉淀法制备了一系列Co~(2+)/Dy~(3+)掺杂的纳米立方MxFe3-xO4磁性颗粒.利用X射线衍射仪、透射电子显微镜和振动样品磁强计研究了不同含量掺杂离子对MxFe3-xO4晶体结构、形貌及磁性的影响.研究发现,掺杂未改变母体的对称性,但母体形貌逐渐从立方体向球体过渡;Co~(2+)和Dy~(3+)的掺杂对于铁氧体磁学性质的影响明显不同,当Co~(2+)实际掺杂量为0.44和Dy~(3+)实际掺杂量为0.05时,MxFe3-xO4立方磁性粒子的饱和磁化强度(Ms)达到最大值,分别为76.65和70.21 A·m2·kg-1.与超顺磁性Fe_3O_4球体相比,高磁性掺杂Fe_3O_4立方体在体外模拟磁流体磁靶向定位实验中显示出较高的滞留率.