基于苊并[1,2-b]喹喔嗪为受体单元设计合成新型红光热活化延迟荧光分子

采用苊并[1,2-b]喹喔嗪(AQ)作为一种新的热活化延迟荧光(TADF)电子受体(A)基团,通过与强电子给体(D)基团吩噁嗪连接成D-A结构,合成出一种新型TADF分子10,10',10'-(苊并[1,2-b]喹喔嗪-3,9,10-三基)-三(10H-吩噁嗪)(AQ-TPXZ),该分子材料发射红色荧光.理论计算表明,该分子的轨道电子云重叠度很小.通过荧光和磷光光谱计算得出,其单线态-三线态能隙差为0.02eV.瞬态衰减测试显示AQ-TPXZ具有瞬时寿命和延迟寿命两种组分.以AQ-TPXZ为发光材料的有机电致发光器件(OLED)实现了红光发射,峰值位于624nm处.该器件的最大外量子效率为7.4%,高于传统的OLED的理论最大外量子效率(5%),这一结果不仅表明AQ-TPXZ为红光TADF分子,同时表明AQ可作为一种新的红光TADF电子受体片段.     

基于喹喔啉和吡啶并吡嗪及咔唑和二苯胺衍生物电子给体-受体结构荧光材料的合成和光电性能

通过α-二酮与邻苯二胺、吡啶二胺缩合反应,构建了喹喔啉和吡啶并吡嗪衍生物作为电子受体,分别以二苯胺、咔唑衍生物为电子给体,合成了4个具有电子给体-电子受体结构的氮杂环荧光材料F1~F4。通过低温荧光/磷光光谱、荧光寿命测试,结合密度泛函理论计算可知,F1~F4均为荧光小分子。室温荧光光谱结果表明,利用电子给体和受体的电子效应不同可以调控材料的发光颜色,其中三苯胺相对于苯基咔唑的供电子能力更强,表现为F1比F2、F3比F4红移现象更加明显;而吡啶并吡嗪具有多氮的缺电子结构,与喹喔啉相比共轭程度增加,导致F3比F1、F4比F2发生的斯托克斯位移数值增大。总之,F1~F4的甲苯溶液最大荧光光谱发射峰位于529、464、568和507 nm,荧光寿命分别为12.21、2.61、9.76和6.03 ns,荧光量子效率最高可达98.2%,具有良好的发光性能。将F1~F4发光材料掺杂在主体材料中制备了有机电致发光二极管DF1~DF4。所得器件DF1和DF3性能更好,最大电流效率分别为13.38和11.98 cd·A^-1,且最大外量子效率分别达到4.8%和4.5%。     

基于喹喔啉和吡啶并吡嗪及咔唑和二苯胺衍生物电子给体-受体结构荧光材料的合成和光电性能

通过α-二酮与邻苯二胺、吡啶二胺缩合反应,构建了喹喔啉和吡啶并吡嗪衍生物作为电子受体,分别以二苯胺、咔唑衍生物为电子给体,合成了 4个具有电子给体-电子受体结构的氮杂环荧光材料 F1~F4。通过低温荧光/磷光光谱、荧光寿命测试,结合密度泛函理论计算可知,F1~F4均为荧光小分子。室温荧光光谱结果表明,利用电子给体和受体的电子效应不同可以调控材料的发光颜色,其中三苯胺相对于苯基咔唑的供电子能力更强,表现为F1比F2、F3比F4红移现象更加明显;而吡啶并吡嗪具有多氮的缺电子结构,与喹喔啉相比共轭程度增加,导致 F3 比 F1、F4 比 F2 发生的斯托克斯位移数值增大。总之,F1~F4的甲苯溶液最大荧光光谱发射峰位于 529、464、568和 507 nm,荧光寿命分别为 12.21、2.61、9.76和 6.03 ns,荧光量子效率最高可达98.2%,具有良好的发光性能。将F1~F4发光材料掺杂在主体材料中制备了有机电致发光二极管DF1~DF4。所得器件DF1和DF3性能更好,最大电流效率分别为13.38和11.98 cd·A^-1,且最大外量子效率分别达到4.8%和4.5%。     

基于侧链不对称喹喔啉聚合物的高效非富勒烯太阳电池

喹喔啉衍生物由于合成简单,易功能化,成本较低等特点在众多领域都有广泛应用。其自身具有平面刚性结构,也是构建光电聚合物的重要单体。基于喹喔啉单元的有机分子化学结构和电子结构可修饰性强,通过骨架、侧链和取代基等修饰,易于调控分子的能级和吸光光谱,因此,当使用喹喔啉体系的共轭给体与球形富勒烯受体(如PCBM)及弱结晶性非富勒烯受体(如ITIC)均可表现出优异的光伏性能。在本工作中,基于结晶性较强的非富勒烯受体(o-IDTBR),我们首次制备出侧链不对称喹喔啉(简称：不对称喹喔啉)基聚合物(TPQ-1)与之匹配。相比于侧链对称性喹喔啉(简称：对称喹喔啉)(HFQx-T)与o-IDTBR组合,“弱结晶给体-强结晶受体”组合能表现出更佳均匀的相分离尺度,从而获得更高的短路电流及能量转换效率。TPQ-1与o-IDTBR共混后器件效率为8.6%,加入15%的TB7-Th后,器件效率达到9.6%。     

压力和酸响应的四苯乙烯修饰喹喔啉类荧光染料的合成与性质研究

合成了新的给受体型四苯乙烯修饰的喹喔啉衍生物BTPQ、DBTPQ和BTBQ.三个化合物表现出不同程度的聚集诱导发光(AIE)行为,当BTBQ (四苯乙烯单元修饰在喹喔啉的2,3-位)的四氢呋喃溶液中含水量达到90%时,其荧光发射强度增加至原来的54倍.此外,固体BTBQ在三氟乙酸蒸气作用下可由淡黄色变成红色,且其蓝绿色荧光被显著猝灭,可见,它可作为传感材料用于酸蒸气的可视化检测.由于连接在喹喔啉5,8-位上的四苯乙烯单元的空阻作用导致BTPQ和DBTPQ不易被质子化,因此,二者对酸不敏感,但是,它们的固态发光颜色在研磨前后发生了明显变化,如,BTPQ在结晶态时发射蓝色荧光,经研磨变成无定形态后,发射蓝绿色荧光, BTPQ和DBTPQ的压致荧光变色行为在研磨、加热/溶剂熏蒸处理下具有可逆性.     

聚合物热激活延迟荧光材料的分子设计与器件性能

聚合物热激活延迟荧光(TADF)材料应用于有机发光二极管(OLEDs)中以来,取得了飞速发展,迄今为止已经报道了多种不同分子结构及性能优异的聚合物TADF发光材料.它们具有不含重金属的化学结构、100%的理论内量子效率和易于通过溶液加工进行大面积制造的优势.本文从分子结构和发光颜色2个角度总结了不同结构TADF聚合物的研究进展,重点介绍了我们课题组在长链型TADF聚合物设计与OLEDs器件性能方面的研究工作,探究TADF聚合物颜色调控与效率提升的途径,论述了TADF聚合物存在的问题与未来发展.     

外围取代基团对卟啉铂(Ⅱ)配合物发光性能的影响

设计合成了具有不同外围取代基的卟啉铂(Ⅱ)配合物PtTEMP, PtTBMP, PtOMPP和PtDMPP, 并对其结构和光电性能进行了表征. 晶体结构分析结果表明, 这些卟啉铂(Ⅱ)配合物具有较理想的平面配位构型, β-位叔丁基的引入有效抑制了分子间的π-π相互作用. 外围取代基几乎不影响配合物的吸收和发光性质, 最大发射峰位于646~656 nm之间, 为配体中心的 ³π^*-π磷光发射. 空间位阻效应更强的叔丁基取代配合物(PtTBMP)的溶液态荧光量子效率和外量子效率最高, 分别为0.58和6.3%. 3个甲氧基取代的PtDMPP的发光效率优于2个甲氧基取代的PtOMPP, 二者的溶液态荧光量子效率分别为0.36和0.29, 外量子效率分别为2.4%和1.7%.     

主链为咔唑-吖啶给体/侧基为三联吡啶受体的热诱导延迟荧光共轭聚合物合成及发光性质

成膜性能优异的聚合物发光材料适宜于可溶液加工大尺寸显示及照明器件制作,赋予其热诱导延迟荧光(TADF)特征能够有效改善器件发光性能.本工作以苯环对位桥连三联吡啶的吖啶衍生物(ABTPy)为TADF单体、咔唑(Cz)衍生物为共聚单体,利用交叉偶联反应,控制TADF单体摩尔投料比为1%、5%、10%和50%,合成了4个主链为咔唑-吖啶给体/侧基为三联吡啶受体的共轭聚合物PCzABTPy1～PCzABTPy50.低含量TADF单元聚合物溶液的光致发光光谱显示了低聚咔唑片段和TADF单元的双峰发射,发光峰位是420和488 nm,聚合物薄膜仅出现单峰发射,发光峰由470 nm红移至508 nm.聚合物瞬态荧光衰减光谱均包含纳秒级瞬时荧光(12～15 ns)和微秒级延迟荧光(1.3～4.8μs),证实聚合物具有TADF特性.以聚合物为发光层的非掺杂溶液加工电致发光器件实现了蓝光发射,发光波长位于452～484 nm.其中,PCzABTPy10发光器件展示了最优的发光性能,最大外量子效率(EQE)为9.4%,启亮电压为3.0 eV.在亮度1000 cd/m²时,器件EQE仍保...     

苯并噻唑酮类热活化延迟荧光材料的合成及其光电性能研究

以苯并噻唑-2-基(苯基)甲酮作为受体,具有强给电子能力的吩噁嗪和吩噻嗪作为给体构筑给体-受体(D-A)型分子,设计合成了两种具有聚集诱导发光(AIE)特性的热活化延迟荧光(TADF)红光材料3和4,并对它们的热稳定性、电化学性质、单晶结构、光物理性质和电致发光性能进行了系统研究.两种化合物具有较小的单三线态能级差(ΔE_ST,0.04和0.16 eV)以及微秒级延迟寿命(0.63和1.30μs),表现出明显的TADF特性.通过对比化合物在粉末状态下研磨前后的发射光谱,发现化合物4具有明显的力致变色发光现象.在纯薄膜下,两种化合物的发射峰分别为683和654 nm,光致发光量子产率(PLQY)分别为0.8%和3.6%.基于化合物3和4的非掺杂有机发光二极管(OLED)器件,均获得了纯红光发射(662和652 nm),器件的最大外量子效率(EQE)分别为0.15%和0.34%.虽然基于这两种化合物的器件发光效率有待提升,但它们的合成过程简便,能为开发苯并噻唑酮类TADF红光材料提供一定的启发.     

红色磷光喹喔啉铂(II)配合物及其有机电致发光器件的制备

利用2,3-二苯基喹喔啉和氯亚铂酸钾(K2PtCl4)反应, 合成了一种新型喹喔啉铂的配合物(DPQ)Pt(acac), 通过元素分析, 1H NMR测定对配合物结构进行了表征, 结果显示得到的是目标化合物. 利用紫外光谱和荧光光谱对配合物进行了研究. 利用该材料作为磷光染料制备了结构为ITO/NPB (21 nm) /NPB∶7%(DPQ)Pt(acac) (17.5 nm) /BCP (7 nm)/ Alq3 (21 nm)/ Mg∶Ag(10∶1)(120 nm)/Ag(10 nm)的有机电致发光器件(OLED). 结果表明, 该配合物在442和485 nm处存在单重态1MLCT(金属到配体的电荷跃迁)和三重态3MLCT的吸收峰; 在632 nm 处有较强的金属配合物三重态的磷光发射; 该器件的启动电压是5.0 V, 器件的最大亮度为1516 cd·m-2, 外量子效率为0.66%, 流明效率为0.26 lm·W-1, 是一种红色磷光材料.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.