基于螺环结构桥连的固有微孔卟啉聚合物网络的制备与表征及其催化Knoevenagel缩合反应

通过5,10,15,20-四(4-羧基苯基)(TCPP)卟啉单体与含螺环结构的二胺单体(SpiroDA)的缩聚反应,实现了含螺环结构的卟啉基固有微孔材料的定向合成(PIM-Spiro)。同时在相同的工艺条件下,以对苯二胺(PPDA),4,4'-二氨基二苯醚(ODA)作为二胺单体分别制备了相应的聚酰胺(PA)网络材料。采用傅里叶红外光谱(FT-IR)、扫描电子显微镜(SEM)、热重分析(TG)、氮气吸附等分析测试手段对3种聚酰胺材料的网络结构和物理化学性能进行了表征。结果表明:螺环扭曲结构的引入可以有效提高微孔卟啉聚合物网络的比表面积,同时在溶剂中表现出很强的溶胀特性;所制备的聚酰胺网络材料中的卟啉基和酰胺键所含的高密度N—H键,赋予材料良好的碱性催化特性。     

聚酰胺-胺树状分子接枝到方法修饰多壁碳纳米管

采用聚酰胺-胺树状分子(PAMAM)“接枝到”这一温和而简单易行的方法修饰多壁碳纳米管(MWCNTs),制备了一种树状分子/碳纳米管(MWCNTs-g-PAMAM)纳米复合材料。在水、甲醇和乙醇等极性溶剂中,该复合材料具有很好的分散性。通过傅立叶变换红外光谱(FTIR)、X-射线光电子能谱(XPS)、热重分析(TGA)和透射电子显微镜(TEM)等对MWCNTs-g-PAMAM纳米复合材料进行了表征。FTIR表明接枝修饰是PAMAM与MWCNTs的共价键结合,TGA数据表明PAMAM成功修饰于MWCNTs侧壁,且接枝到MWCNTs上PAMAM的量随其代数(G1.0～G4.0)的不同而不同,具体顺序为G2.0＞G1.0≈G3.0＞G4.0.     

不同分子量木质素磺酸钠对多壁碳纳米管分散性能的影响

研究了不同分子量级分的木质素磺酸钠(SLS)在多壁碳纳米管(MWCNTs)上的吸附特征及其对分散性能的影响.不同级分的SLS及其对MWCNTs的分散性能通过凝胶渗透色谱(GPC),紫外-可见(UV-Vis)光谱、元素分析、傅里叶变换红外(FT-IR)光谱、zeta电位、扫描电子显微镜(SEM)来表征.结果表明,分子量较大的SLS级分中芳香环含量较高,其与MWCNTs之间的π-π作用更强,在MWCNTs上的吸附量大,表现出最佳的分散性能,所分散的MWCNTs的电阻率最小,导电性能较佳.     

磺化聚苯乙炔/多壁碳纳米管复合材料导电特性和机理的研究

将磺化聚苯乙炔(SPPA)与多壁碳纳米管(MWCNTs)超声共混制备得到SPPA/MWCNTs复合材料. 用X光电子能谱仪、固体紫外-可见分光光度计、X射线衍射仪、四探针、场发射扫描电镜等对复合材料导电特性及机理进行研究. 结果表明: SPPA/MWCNTs 复合材料中SPPA与MWCNTs发生电荷转移而被掺杂, 并且由于SPPA与MWCNTs间的电荷转移, 彼此间存在一定的相互作用力; 复合材料电阻呈负温度系数效应; SPPA/MWCNTs复合材料电导率发生两次突跃. 可能的导电机理为, 复合材料中SPPA不仅被MWCNTs物理填充, 同时还被MWCNTs掺杂, 复合材料中存在两种导电通路, 一是SPPA与MWCNTs的碳原子发生电荷转移而被掺杂, 彼此之间存在一定的相互作用力, 导致SPPA包裹MWCNTs形成独立导体单元, 这种独立单元相互接触形成导电通路; 二是MWCNTs彼此之间相互接触形成导电通路, 并建立了该导电机理的理论模型.     

中分子毒素在碳纳米管上的吸附

研究了两种不同形态的碳纳米管(随机生长多壁碳纳米管(MWCNTs)及定向生长多壁碳纳米管(ACNTs))对典型中分子毒素的吸附性能. 并与两种现有商用血液灌流吸附材料(活性炭(AC)及大孔吸附树脂(MR))进行了对比. 结果显示, 碳纳米管(CNTs)具有优异的中分子吸附能力, 其中MWCNTs对典型中分子毒素的吸附量可达47.18 mg·g-1, 为活性炭的10.8倍, 为大孔吸附树脂的5.5倍. 此外, 碳纳米管的吸附非常迅速, 中分子毒素在MWCNTs及ACNTs达到吸附平衡的时间仅为10 min和15 min, 而活性炭及大孔吸附树脂则分别需要60 min及120 min. 碳纳米管优异的吸附性能得益于其独特的微观结构所形成的发达的中孔. 因此, 碳纳米管可望成为高效的吸附材料, 应用于血液灌流中.     

meso-四(4-羧基苯基)卟啉及金属配合物的合成和对糖类的选择识别

用微波辐射和溶剂热方法合成了meso-四(4-羧基苯基)卟啉(TCPP)及其锌配合物,分别采用紫外-可见光谱滴定法和荧光光谱法测定了目标化合物对5种糖类化合物(D-葡萄糖、D-果糖、蔗糖、麦芽糖和乳糖)的分子识别作用.结果表明,两种卟啉化合物对麦芽糖有较好的识别作用,用紫外-可见光谱方法计算出TCPP和ZnTCPP与麦芽糖分别形成1∶2和1∶1的络合物,结合常数分别为8.1×107和8.1×103L·mol-1.     

多壁碳纳米管/聚丙烯酸/MOF-5的制备及其N_2吸附性能

用化学修饰法制备出复合物多壁碳纳米管/聚丙烯酸(MWCNTs/PAA),用溶剂热法合成Zn4O(1,4-benzenedicarboxylate)3(MOF-5)和MWCNTs/PAA/MOF-5。通过XRD、FTIR、TG、HRTEM和比表面积和孔隙度分析仪对MWCNTs,MOF-5,MWCNTs/PAA和MWCNTs/PAA/MOF-5的结构和性质进行表征。结果表明:复合材料MWCNTs/PAA中PAA包覆在碳纳米管外壁上,含量为4.3%,在FTIR中有PAA特征官能团的吸收峰;MWCNTs/PAA/MOF-5和MOF-5的形貌一样,MWCNTs/PAA/MOF-5的热分解温度比MOF-5的提高了49℃;MOF-5和MWCNTs/PAA/MOF-5的N2吸附曲线为Ⅰ型,77 K和100 k Pa条件下,N2的吸附量达到最大值,分别为265、299.03 cm3·g-1。     

二氧化锡填充多壁碳纳米管材料的制备及电化学性能

用硝酸氧化法处理多壁碳纳米管(MWCNTs), 使得MWCNTs端口打开, 长度变短, 表面得到改性. 通过二氯化锡与硝酸银反应, 过滤后的溶液在浓硝酸环境中, Sn2+在毛细作用下扩散进入碳纳米管管腔, 吸附、成核并在热处理作用下沉积, 从而制备出SnO2/MWCNTs纳米复合材料. XRD和TEM测试表明, 部分SnO2填充到MWCNTs管腔, 形成不连续的纳米颗粒. 电化学测试表明, SnO2填充的MWCNTs可以结合两者的优势, 使得复合材料的循环性能和比容量均有所改善.     

电化学间接测量法研究谷胱甘肽在多壁碳纳米管和活性炭上的吸附

选取谷胱甘肽(GSH)作为小分子代表物,利用Cr(VI)与GSH的相互作用,即K2Cr2O7/H2SO4溶液加入GSH前后Cr(VI)还原峰电流值的差异,通过差分脉冲伏安法(DPV)的测定,可以间接测出GSH的含量.尝试将这种电化学间接测量法应用于研究多壁碳纳米管(MWCNTs)与商业活性炭(AC)对GSH的吸附行为.利用该方法可以确立GSH在二者的吸附量(Q)与吸附平衡浓度(Ce)的关系,绘制吸附等温曲线.根据Langmuir方程和Freundlich方程的拟合分析,证明了与商业活性炭相比,GSH在MWCNTs上的吸附更倾向Freundlich模型,即多分子层吸附.利用扫描电子显微镜(SEM)和透射电子显微镜(TEM)进行形貌表征,发现MWCNTs具有发达的堆积孔结构,有利于GSH小分子内扩散和吸附,与实验结果一致.     

Ru-P/MWCNTs-DHP/GC电极的电化学特性

应用循环伏安法、微分脉冲伏安法、紫外-可见和荧光光谱研究了一种新型钌化卟啉[Ru(phen)2(MPyTMPP)Cl]+(phen=1,10-邻菲咯啉,MPyTMPP=5-(3-吡啶)-10,15,20-三-(4-甲苯基)-卟啉)在多壁碳纳米管(MWCNTs)修饰的玻碳(GC)电极表面的电化学特性及其与电极上和溶液中双十六烷基磷酸盐(DHP)的作用.结果表明:[Ru(phen)2(MPyTMPP)Cl]+能强吸附在MWCNTs-DHP/GC电极表面,并呈现一对由表面过程控制的氧化还原峰;适量DHP有利于该配合物的吸附固定;[Ru(phen)2(MPyTMPP)Cl]+能与溶液中的DHP形成结合体,导致配合物中心离子反应电位负移.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.