Improvement of poly(amphiphilic pyrrole) enzyme electrodes via the incorporation of synthetic laponite-clay-nanoparticles

The electropolymerization of an enzyme-amphiphilic pyrrole ammonium-laponite nanoparticles mixture preadsorbed on the electrode surface provides the simultaneous immobilization of the enzyme and the hydrophilic laponite-clay-nanoparticles in a functionalized polypyrrole film. The presence of incorporated laponite particles within the electrogenerated polymer induces a strong improvement of the analytical performances (I_max and sensitivity) of amperometric biosensors based on polyphenol oxidase. These beneficial effects have been attributed to a marked enhancement of the apparent specific activity of the immobilized enzyme (from 0.21 to 0.85% of the specific activity of the free enzyme), the permeability of the host polymer being unchanged. This strategy of biosensor performance improvement was tested with cholesterol oxidase as an enzyme model. The presence of laponite additive in the poly(amphiphilic pyrrole) host matrix induces a similar enhancement of sensitivity and I_max for cholesterol biosensing as well as a large improvement of the storage stability of the polypyrrole-cholesterol oxidase electrode.     

Permeability Improvement of Electropolymerized Polypyrrole Films in Water Using Magnetic Hydrophilic Microbeads

The electrochemical polymerization of polypyrrole films onto magnetically immobilized hydrophilic microbeads was carried out. Poly(pyrrole‐pyrene)‐microbeads coatings display thus higher permeability in water towards the diffusion of ferrocyanide than a pure poly(pyrrole‐pyrene) film. In addition, the modulation of this permeability through an applied magnetic field that attracts the microbeads on the electrode surface or pushes back them was shown. Moreover, a glucose biosensor was prepared by adsorbing and electropolymerizing on a platinum electrode, an aqueous mixture containing glucose oxidase, amphiphilic pyrrole monomer and microbeads attracted by a magnet. The presence of microbeads inside the biocoating, markedly increases the biosensor performance.     

Improvement of poly(amphiphilic pyrrole) enzyme electrodes via the incorporation of synthetic laponite-clay-nanoparticles

The electropolymerization of an enzyme-amphiphilic pyrrole ammonium-laponite nanoparticles mixture preadsorbed on the electrode surface provides the simultaneous immobilization of the enzyme and the hydrophilic laponite-clay-nanoparticles in a functionalized polypyrrole film. The presence of incorporated laponite particles within the electrogenerated polymer induces a strong improvement of the analytical performances (I_max and sensitivity) of amperometric biosensors based on polyphenol oxidase. These beneficial effects have been attributed to a marked enhancement of the apparent specific activity of the immobilized enzyme (from 0.21 to 0.85% of the specific activity of the free enzyme), the permeability of the host polymer being unchanged. This strategy of biosensor performance improvement was tested with cholesterol oxidase as an enzyme model. The presence of laponite additive in the poly(amphiphilic pyrrole) host matrix induces a similar enhancement of sensitivity and I_max for cholesterol biosensing as well as a large improvement of the storage stability of the polypyrrole-cholesterol oxidase electrode.     

Amperometric Glucose Biosensor Based on the Deposition of Copper and Glucose Oxidase onto Glassy Carbon Transducer

ABSTRACT

The performance of a first generation glucose amperometric biosensor based on the entrapment of glucose oxidase (GOx) within a net of copper electrodeposited onto activated glassy carbon electrode, is described. The copper electrodeposited offers an efficient electrocatalytic activity towards the reduction of enzymatically-liberated hydrogen peroxide, allowing for a fast and sensitive glucose quantification. The influence of the electrodeposition conditions (pH, potential, time, copper salt and enzyme concentrations) on the response of the bioelectrode was evaluated from the amperometric signals of hydrogen peroxide and glucose. The combination of copper electrodeposition with a nation membrane allows an excellent selectivity towards easily oxidizable compounds such as uric and ascorbic acids at an operating potential of -0.050 V. The response is linear up to 2.0 × 10^?2 M glucose, the detection limit being 1.2 × 10^?3 M.     

Assembly of Glucose Oxidase and Different Polyelectrolytes by Means of Electrostatic Layer‐by‐Layer Adsorption on Thiolated Gold Surface

A rational strategy for the construction of a bioelectrocatalytic architecture by means of alternate electrostatic adsorption is described. Multilayer films containing glucose oxidase (GOx) and different polyelectrolytes were assembled onto a thiolated‐gold surface and the resulting bioelectrode was used for glucose biosensing. The supramolecular multistructure was prepared by assembling polyethylenimine and Nafion (as anti‐interference barrier), followed by the adsorption of polyethylenimine and DNA (as stabilizing film) and finally by the alternate deposition of polyethylenimine and glucose oxidase (as a biocatalytic layer). The influence of the deposition time and concentration of polyelectrolytes, organization and number of layers on the sensitivity and selectivity of the bioelectrode is discussed. The resulting enzymatic biorecognition layer exhibits very good analytical performance with a fast, sensitive (3.3±0.1)×10⁴ nA M^?1 and highly selective (0% interference for 6.0 mg % uric acid and 2.0×10^?4 M ascorbic acid) response to glucose, demonstrating that the alternate electrostatic adsorption of conveniently selected polyelectrolytes allow a large improvement in the selectivity and sensitivity of a biosensor.     

Enhanced Direct Electron Transfer of a Multihemic Nitrite Reductase on Single‐walled Carbon Nanotube Modified Electrodes

Single‐walled carbon nanotubes (SWCNTs) deposits on glassy carbon and pyrolytic graphite electrodes have dramatically enhanced the direct electron transfer of the multihemic nitrite reductase from Desulfovibrio desulfuricans ATCC 27774, enabling a 10‐fold increase in catalytic currents. At optimal conditions, the sensitivity to nitrite and the maximum current density were 2.4±0.1 A L mol^?1 cm^?2 and 1500 µA cm^?2, respectively. Since the biosensor performance decreased over time, laponite clay and electropolymerized amphiphilic pyrrole were tested as protecting layers. Both coating materials increased substantially the bioelectrode stability, which kept about 90 % and 60 % of its initial sensitivity to nitrite after 20 and 248 days, respectively.     

Electrochemical Study of Chitosan‐SiO2‐MWNT Composite Electrodes for the Fabrication of Cholesterol Biosensors

We report a novel composite electrode made of chitosan‐SiO₂‐multiwall carbon nanotube (CHIT‐SiO₂‐MWNT) composite coated on the indium‐tin oxide (ITO) glass substrate. Cholesterol oxidase (ChOx) was covalently immobilized on the CHIT‐SiO₂‐MWNT/ITO electrode that resulted in a ChOx/CHIT‐SiO₂‐MWNT/ITO cholesterolactive bioelectrode. The CHIT‐SiO₂‐MWNT/ITO and ChOx/CHIT‐SiO₂‐MWNT/ITO electrodes were characterized with Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The influence of various parameters was investigated, including the applied potential, pH of the medium, and the concentration of the enzyme on the performance of the biosensor. The cholesterol bioelectrode exhibited a sensitivity of 3.4 nA/ mgdL^?1 with a response time of five seconds. The biosensor using ChOx/CHIT‐SiO₂‐MWNT/ITO as the working electrode retained its original response after being stored for six months. The biosensor using ChOx/CHIT‐SiO₂‐MWNT/ITO as the working electrode showed a linear current response to the cholesterol concentration in the range of 50–650 mg/dL.     

Study of ITO Glass Electrode Modified with Iron Oxide Nanoparticles and Nafion for Glucose Biosensor Application

In this study, we report the fabrication of the indium tin oxide (ITO) glass electrode modified with iron oxide nanoparticles (IONPs) and nafion for glucose biosensor applications. The IONPs was synthesized using the precipitation method and functionalized with citric acid (CA) to provide hydrophilic surface and functional group for glucose oxidase (GOx) enzyme immobilization. The structural and morphological studies of CA-IONPs were characterized using X-ray diffractometer (XRD) and transmission electron microscope (TEM). The size of the IONPs measured from TEM image was ∼17 nm. The bioelectrode designated as Nafion/GOx/CA-IONPs/ITO was developed by drop casting of the CA-IONPs, GOx and nafion on the ITO glass. The Nafion/GOx/CA-IONPs/ITO bioelectrode showed good electrochemical performance for glucose detection. The functionalized CA-IONPs acted as the catalyst and help to improve the electron transfer rate between GOx and ITO electrode. In addition, thin nafion film was coated on the electrode to prevent interference and improve chemical stability. The Nafion/GOx/CA-IONPs/ITO bioelectrode showed high sensitivity of 70.1 μAmM^-1cm^-2 for the linear range of 1.0-8.0 mM glucose concentrations.     

Poly (4-methoxyphenol) film as a galactose-sensing material

Poly (4-methoxyphenol)-galactose oxidase biosensor for galactose is reported. This amperometric biosensor was prepared in a one-step procedure by electrochemical polymerization of the relevant monomer in the presence of galactose oxidase on Pt electrode surface in a KCl solution at potential of 0.6 V vs. Ag/AgCl. From the steady-state amperometric responses to galactose of the resulting polymeric biosensor, its sensor characteristics such as feasibility of preparation, linear range, response time, selectivity and stability were evaluated.     

Electroactive Prussian Blue Encapsulated Iron Oxide Nanostructures for Mediator‐Free Cholesterol Estimation

Iron oxide nanoparticles of size ～10 nm have been encapsulated into four nanometer thick shells of Prussian blue and were then electrophoretically deposited onto an indium tin oxide substrate. The immobilization of cholesterol oxidase has been done onto the nanostructured film to investigate the kinetic parameters and biosensing characteristics. The fabricated bioelectrode exhibits an electron transfer coefficient and a charge transfer rate constant of 0.45 and 45.15 s^?1, respectively. Direct electron transfer properties of the nanostructured film result in 3^rd generation cholesterol biosensor. The bioelectrode exhibits high sensitivity (2.15 mAM^?1 cm^?2), a low K_m^app value (0.07 mM), good stability and high selectivity towards cholesterol.     

A Highly Sensitive Amperometric Galactose Biosensor Based on Graphene-doped Sol-gel-derived Titania-Nafion Composite Films

A highly sensitive amperometric galactose biosensor was developed by encapsulating galactose oxidase within the graphene-doped sol-gel titania-Nafion composite film on platinized glassy carbon electrode. Due to the combined electrocatalytic activity of graphene and Pt NPs on the electrode towards hydrogen peroxide as well as the mesoporous nature of the titania-Nafion composite, the present galactose biosensor exhibited relatively fast response time under 2 s, high sensitivity of 40.6 mAM⁻¹cm⁻², and wide dynamic range over three orders of magnitude with a detection limit of 3.78×10⁻⁶ M (S/N=3). In addition, the biocompatible composite in the biosensor secures excellent long-term stability.     

SiO2 coated Fe3O4 magnetic nanoparticle dispersed multiwalled carbon nanotubes based amperometric glucose biosensor

A new type of amperometric glucose biosensor based on silicon dioxide coated magnetic nanoparticle decorated multiwalled carbon nanotubes (Fe₃O₄@SiO₂/MWNTs) on a glassy carbon electrode (GCE) has been developed. MWNTs have been synthesized by catalytic chemical vapour decomposition (CCVD) of acetylene over rare earth (RE) based AB₃ alloy hydride catalyst. The as-grown MWNTs have been purified and further functionlized. Functionalized MWNTs have been decorated with magnetic Fe₃O₄ nanoparticles which have been uniformly coated with biocompatible SiO₂ using a simple chemical reduction method. The characterization of magnetic nanoparticle modified MWNTs have been done by X-ray diffraction (XRD), Fourier transform infra red spectroscopy (FT-IR), scanning electron microscope (SEM), transmission electron microscope (TEM), vibrating sample magnetometer (VSM), energy dispersive X-ray analysis (EDX) and UV-vis spectroscopy. Amperometric biosensor has been fabricated by the deposition of glucose oxidase (GOD) over Nafion-solubilized Fe₃O₄@SiO₂/MWNTs electrode. The resultant bioelectrode retains its biocatalytic activity and offers fast and sensitive glucose quantification. The performance of the biosensor has been studied using cyclic voltammetry and amperometry and the results have been discussed. The fabricated glucose biosensor exhibits a linear response from 1 μM to 30 mM with an excellent detection limit of 800 nM indicating the potential applications in food industries.     

Amperometric detection of pyridine nucleotides via immobilized viologen-accepting pyridine nucleotide oxidoreductase or immobilized diaphorase

The immobilization and electrical connection of a viologen-accepting pyridine nucleotide oxidoreductase (VAPOR) on an electrode surface by coadsorption with an amphiphilic pyrrole viologen and electropolymerization of this pyrrole monomer are described. The immobilized VAPOR catalyzes the reduction of NAD(P)(+) to NAD(P)H by the viologen redox couple (V(2+2+)). The sensitivity of this biosensor is 1.4 and 2.5 mA M(-1) cm(-2) for NAD(+) and NADP(+) respectively. The immobilization of diaphorase within a laponite gel adsorbed on an electrode surface is described. The incorporation and electropolymerization of Methylene Blue in the biolayer allows an electron transfer communication between diaphorase molecules and the electrode surface. The diaphorase electrode thus obtained responds to NADH at 0 V. The sensitivity and detection limit of this biosensor are 11.2 mA M(-1) cm(-2) and 1 muM respectively.     

Amperometric Glucose Biosensors Based on Composite Polymeric Structures to Prevent Interferences

ABSTRACT

High sensitive glucose biosensors were realised by oxidative polymerisation of amphiphilic pyrrole monomer-glucose oxidase mixtures, previously adsorbed on platinum electrodes. These sensors, based on H₂O₂ electrooxidation at 0.5V vs SCE, exhibited marked interferences due to electrooxidisable endogenous (ascorbate and urate) and exogenous (paracetamol) compounds. Bilayer structures, combining the preceding polymer film as an outer layer and electrogenerated poly(phenylene diamine), overoxidised polypyrrolic films or Nafion as an inner layer, were fabricated in order to minimise interferences. Finally, the use of Nafion as a semipermeable barrier appeared to be more efficient than the electrogenerated films. The Nafion-based biosensor exhibited glucose sensitivity of 0.4 mA.M^?1; .cm^?2, while interference of ascorbate, urate and paracetamol was negligible.     

Construction of an Amperometric Glucose Biosensor by Immobilization of Glucose Oxidase on Nanocomposite at the Surface of FTO Electrode

Fluorine? tin oxide (FTO) nanostructure was developed on the surface of a glass plate using spray payroliziz method. A new electrochemical biosensor was fabricated based on a layer by layer process. In this process chitosan? Fe₃O₄ (CH? Fe₃O₄) nanocomposite film was prepared at the surface of FTO electrode by dip? coating method. In the next step, the glucose oxidase (GOx) was immobilized on the CH? Fe₃O₄/FTO nanocomposite electrode. The GOx/CH? Fe₃O₄/FTO bioelectrode has a linear range of 10–270 µM and a detection limit of 5 µM. The highest sensitivity was obtained at 1.2 µA mM^?1 cm^?2.     

Nanostructured zirconium oxide based genosensor for Escherichia coli detection

A deoxyribonucleic acid (DNA) biosensor has been fabricated via immobilization of 17 base terminal single stranded DNA (ssDNA) identified from the 16s rRNA coding region of Escherichia coli onto sol–gel derived nanostructured zirconium oxide (NanoZrO₂) film. An oligonucleotide probe with a terminal 5′-phosphate group has been attached to the surface of the electrode via affinity of NanoZrO₂ for phosphate. The results of hybridization studies carried out with the complementary, non-complementary and genomic DNA reveal that ssDNA/NanoZrO₂/ITO bioelectrode has a high selectivity and sensitivity towards hybridization detection with limits of 10^?6–10⁶ pM of complementary DNA.     

Stimuli‐Responsive Biointerface Based on Polymer Brushes for Glucose Detection

The construction and characterization of a biosensor based on polymer brushes is reported. The use of polymer brushes combined with nanoparticles was applied to show its suitability as a biosensor platform – with glucose oxidase as an enzyme probe. The biosensor demonstrated a pH‐sensitive on‐off property, and it was further used to control or modulate the electrochemical responses. In terms of the kinetic behavior, we were able to show the changing in the kinetic parameters of glucose oxidase operating in “on” and “off” state of the polymer brushes. The performance of the bioelectrode was investigated by chronoamperometry, impedance electrochemistry and cyclic voltammetric techniques. At optimized experimental conditions the dynamic concentration range was 2.0 to 16.0 mmol L^?1 with a detection limit of 5.6×10–⁶ mol L^?1. The repeatability of current responses for injections of 5.0 mmol L^?1 glucose was evaluated to be 5.3 % (n=10). The resulting biosensor seemed to provide the enzymes with a biocompatible nanoenvironment as it sustained the enhanced enzyme activity for an extended time and promoted possible good electron transfer through the polymer brushes to the electrode.     

Cholesterol oxidase biosensor based on a glassy carbon electrode modified with Nafion and methyl viologen

Cholesterol oxidase biosensor has been constructed by using bovine serum albumin and glutaraldehyde as cross linker to immobilize cholesterol oxidase and cholesterol esterase on a glassy carbon electrode modified with Nafion and methyl viologen. The biosensor has been used to determine total cholesterol in blood. The linear range of the determination is 2.5×10~7 to 1.0×10-4 mol/L. The detection limit is about 5.0×10~8 mol/L. The response time is 12 s. This biosensor has the advantage of high selectivity, sensitivity and short response time.     

基于纳米金和硫堇固定酶的过氧化氢生物传感器

在铂电极上自组装一层纳米金(GNs), 构建负电荷的界面, 然后通过金-硫、金-氮共价键合作用和静电吸附作用自组装一层阳离子电子媒介体硫堇(Thio). 再以同样的作用自组装一层GNs和辣根过氧化酶(HRP)的混合物, 最后在电极最外层滴加一层疏水性聚合物壳聚糖(Chit), 由此制备了一种新型的过氧化氢生物传感器. 研究了工作电位、检测底液pH、温度对响应电流的影响, 以及GNs和HRP之间的相互作用, 探讨了传感器的表面形态、交流阻抗、重现性和稳定性. 该传感器的酶催化反应活化能为12.4 kJ/mol, 表观米氏常数为6.5×10^－4 mo/L, 在优化的实验条件下, 所研制的传感器对H₂O₂的线性范围为5.6×10^－5～2.6×10^－3 mol/L, 检出限为1.5×10^－5 mol/L. 应用此方法制备了HRP和葡萄糖氧化酶(GOD)双酶体系葡萄糖生物传感器, 并应用于实验样品葡萄糖含量的测定.     

Development of a hypoxanthine biosensor based on immobilized xanthine oxidase chemically modified electrode

An amperometric biosensor for hypoxanthine determination has been developed. The sensor uses a Nafion-paraquat chemically modified glassy-carbon electrode. It detects the oxygen consumed by the enzymatic reaction catalyzed by xanthine oxidase which is immobilized on the electrode surface. The sensor responds linearly to hypoxanthine over the concentration range of 1 × 10⁻⁶ M −2 × 10⁻⁴ M. The biosensor can be reused for more than 100 times without significant deterioration in performance. After 32 days storage at 3–5°C, the sensor response remains at 68% of the initial level. The high sensitivity, selectivity and stability of this biosensor demonstrates its practical applicability for a simple, rapid and economical determination of hypoxanthine in fish samples.