Tris(2,2′-bipyridyl)ruthenium(II) electrogenerated chemiluminescence sensor based on carbon nantube dispersed in sol-gel-derived titania-Nafion composite films

A highly sensitive and stable tris(2,2′-bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺) electrogenerated chemiluminescence (ECL) sensor was developed based on carbon nanotube (CNT) dispersed in mesoporous composite films of sol-gel titania and perfluorosulfonated ionomer (Nafion). Single-wall (SWCNT) and multi-wall carbon nanotubes (MWCNT) can be easily dispersed in the titania-Nafion composite solution. The hydrophobic CNT in the titania-Nafion composite films coated on a glassy carbon electrode certainly increased the amount of Ru(bpy)₃²⁺ immobilized in the ECL sensor by adsorption of Ru(bpy)₃²⁺ onto CNT surface, the electrocatalytic activity towards the oxidation of hydrophobic analytes, and the electronic conductivity of the composite films. Therefore, the present ECL sensor based on the CNT-titania-Nafion showed improved ECL sensitivity for tripropylamine (TPA) compared to the ECL sensors based on both titania-Nafion composite films without CNT and pure Nafion films. The present Ru(bpy)₃²⁺ ECL sensor based on the MWCNT-titania--Nafion composite gave a linear response (R² = 0.999) for TPA concentration from 50 nM to 1.0 mM with a remarkable detection limit (S/N = 3) of 10 nM while the ECL sensors based on titania-Nafion composite without MWCNT, pure Nafion films, and MWCNT-Nafion composite gave a detection limit of 0.1 μM, 1 μM, and 50 nM, respectively. The present ECL sensor showed outstanding long-term stability (no signal loss for 4 months).     

Detection of Galactose and Lactose by a Poly(Amphiphilic Pyrrole)-Galactose Oxidase Electrode

Abstract

The entrapment of galactose oxidase (GAO) on an electrode surface by coadsorption with a cationic amphiphilic pyrrole and electropolymerization of this pyrrole monomer is described. This simple and rapid procedure for biosensor construction provides very fast responsive and sensitive GAO-based sensors to galactose and lactose. The electrode response is based on the electrochemical detection of enzymically generated hydrogen peroxide. The stability, optimum pH and selectivity of the bioelectrode as well as the characteristics of the immobilized galactose oxidase have been determined. Poly(amphiphilic pyrrole) films have been electrogenerated on the surface of the bioelectrode and the effect of such additional coatings on the biosensor selectivity have also been examined.     

Graphene/Poly(vinylferrocene) Composite Based Amperometric Biosensor for L‐lysine Determination

A novel and sensitive amperometric biosensor for L‐lysine determination based on a glassy carbon electrode (GCE) modified with graphene (GR) and redox polymer poly(vinylferrocene) (PVF) was constructed. L‐lysine‐α‐oxidase was immobilized onto the modified GCE by a glutaraldehyde/bovine serum albumin cross‐linking procedure. SEM, CV and EIS were used for the characterization of the surface morphology and stepwise fabrication processes of PVF/GR composite. Optimal composition of the biosensor and experimental conditions that affect the performance of the biosensor are discussed. The effect of buffer pH on biosensor response was studied in detail over a wide pH range. L‐lysine biosensor displayed a linear range of 9.9×10⁻⁷ ‐ 3.1×10⁻⁴ M with a low detection limit of 2.3×10⁻⁷ M and K_M ^app value of 0.4 mM. The L‐lysine biosensor was tested using pharmaceutical sample and cheese with satisfactory results.     

Poly (4-methoxyphenol) film as a galactose-sensing material

Poly (4-methoxyphenol)-galactose oxidase biosensor for galactose is reported. This amperometric biosensor was prepared in a one-step procedure by electrochemical polymerization of the relevant monomer in the presence of galactose oxidase on Pt electrode surface in a KCl solution at potential of 0.6 V vs. Ag/AgCl. From the steady-state amperometric responses to galactose of the resulting polymeric biosensor, its sensor characteristics such as feasibility of preparation, linear range, response time, selectivity and stability were evaluated.     

Amperometric Glucose Biosensor Based on Electrochemically Deposited Gold Nanoparticles Covered by Polypyrrole

Graphite rod (GR) modified with electrochemicaly deposited gold nanoparticles (AuNPs) and adsorbed glucose oxidase (GOx) was used in amperometric glucose biosensor design. Enzymatic formation of polypyrrole (Ppy) on the surface of GOx/AuNPs/GR electrode was applied in order to improve analytical characteristics and stability of developed biosensor. The linear glucose detection range for Ppy/GOx/AuNPs/GR electrode was dependent on the duration of Ppy‐layer formation and the linear interval was extended up to 19.9 mmol L⁻¹ after 21 h lasting synthesis of Ppy. The sensitivity of the developed biosensor was determined as 21.7 μA mM⁻¹ cm⁻², the limit of detection – 0.20 mmol L⁻¹. Ppy/GOx/AuNPs/GR electrodes demonstrated advanced good stability (the t _1/2 was 9.8 days), quick detection of glucose (within 5 s) in the wide linear interval. Additionally, formed Ppy layer decreased the influence of electroactive species on the analytical signal. Developed biosensor is suitable for the determination of glucose in human serum samples.     

Nonenzymatic dopamine biosensor based on tannin nanocomposite

A dopamine (DA) biosensor was developed based on polypyrrole/tannin/cetyltrimethylammonium bromide (PPy/TA/CTAB) nanocomposite and central composite rotatable design (CCRD) was employed for the optimization of conditions. Chemical polymerization of the PPy/TA in the presence of a cationic surfactant, CTAB, reduced the particle size of composite and a rod-like structure with a lumpy surface and high porosity was observed for nanocomposite justifying the highest current response for the modified electrode. Amperometry and differential pulse voltammetry analyses were applied for all electrochemical measurements and DA detection in the range of 0.5–100 μM. The good adhesion of nanocomposite on the electrode surface, as well as porosity and high surface area of the modified electrode, enhanced the diffusion of DA molecules inside the matrix. Amperometry analysis of the Screen printed carbon electrode/PPy/TA/CTAB modified electrode displayed a good sensitivity of 0.039 μA (μM)⁻¹ toward DA with the limit of detection of 2.9 × 10^–7 M. The modified biosensor also excludes the interfering species of ascorbic acid and uric acid which makes this sensor appropriate for DA determination. The proposed biosensor showed an acceptable reproducibility and repeatability with low relative standard deviations of 4.8% and 4.4%, respectively.     

Development and Application of a Voltammetric Biosensor Based on Polypyrrole/uricase/graphene for Uric Acid Determination

In the present paper a voltammetric biosensor based on platinum electrode and polypyrrole / uricase / graphene composite, named Pt‐PPy/UOx/Grap has been successfully prepared and validated for uric acid (UA) determination in real samples. The electrochemical behavior has been evaluated by employing cyclic voltammetric. The charge transfer coefficient, α, and the charge transfer rate constant, κs, for electron transfer between PPy/UOx/Grap and Pt were calculated as 0.71, in average, and 48.3 s⁻¹, respectively. Under optimized conditions for the composite (2.5 U mL⁻¹ of UOx, 0.3 mg mL⁻¹ of Grap and 2.9 mmol L⁻¹ of pyrrole) and for the analysis (pH 7.0 in 0.1 mol L⁻¹ phosphate buffer) the method was validated for UA determination at human urine and showed good linearity to UA from 2 up to 24 nmol L⁻¹ (r=0.993) with limits of detection and quantification of 0.541 and 1.805 nmol L⁻¹, respectively. The results obtained for the UA determination at urine presented a relative error lower than 5 %, showing the good performance of the method developed and potential application in UA clinical analysis.     

基于微机械加工技术的双腔型生物传感器

利用微机械加工技术研制了具有三维结构的腔型传感器，双腔型工作电极与Ag/Agcl参比电极集成在同一微芯片上。考察了微腔型电极的电化学特性及其对H2O2含量的测定。并以此为基础电极制备了半乳糖、葡萄糖双腔型生物传感器。结果表明，该传感器可同时测定半乳糖、葡萄糖双组分，线性上限分别为4．5mmol/L和4．0mmol/L。而且在测试双组分过程中，没有观察到明显的交叉干扰现象。     

Neuraminidase Based Electro-Nano Diagnostic Platforms: Development of Model Systems for Cancer Diagnosis

An electrochemical biosensor that monitored neuraminidase (NEU3), activity was developed. The analysis platform included a graphene-platinum hybrid modified gold screen printed electrode as a transducer. The detection protocol was based on observation of NEU3 activity which was used to remove sialic acid from the GD3 ganglioside. Examination of analytical characteristics resulted with two linear ranges of 10⁻⁸ U/mL–10⁻¹ and 10⁻¹ U/mL–2.53 U/mL with limit of detection values of 10⁻⁸ U/mL and 10⁻¹ U/mL, respectively. The selectivity of the developed NEU3 activity based electrochemical biosensor was tested with HeLa, VERO and A549 cell lines.     

A Novel Enzymatic Glucose Biosensor and Nonenzymatic Hydrogen Peroxide Sensor Based on (3‐Aminopropyl) Triethoxysilane Functionalized Reduced Graphene Oxide

In the present study, a novel enzymatic glucose biosensor using glucose oxidase (GOx) immobilized into (3‐aminopropyl) triethoxysilane (APTES) functionalized reduced graphene oxide (rGO‐APTES) and hydrogen peroxide sensor based on rGO‐APTES modified glassy carbon (GC) electrode were fabricated. Nafion (Nf) was used as a protective membrane. For the characterization of the composites, Fourier transform infrared spectroscopy (FTIR), X‐ray powder diffractometer (XRD), and transmission electron microscopy (TEM) were used. The electrochemical properties of the modified electrodes were investigated using electrochemical impedance spectroscopy, cyclic voltammetry, and amperometry. The resulting Nf/rGO‐APTES/GOx/GC and Nf/rGO‐APTES/GC composites showed good electrocatalytical activity toward glucose and H₂O₂, respectively. The Nf/rGO‐APTES/GC electrode exhibited a linear range of H₂O₂ concentration from 0.05 to 15.25 mM with a detection limit (LOD) of 0.017 mM and sensitivity of 124.87 μA mM⁻¹ cm⁻². The Nf/rGO‐APTES/GOx/GC electrode showed a linear range of glucose from 0.02 to 4.340 mM with a LOD of 9 μM and sensitivity of 75.26 μA mM⁻¹ cm⁻². Also, the sensor and biosensor had notable selectivity, repeatability, reproducibility, and storage stability.     

Amperometric Biosensor for Detection of Phenolic Compounds Based on Tyrosinase,N‐Acetyl‐L‐cysteine‐capped Gold Nanoparticles and Chitosan Nanocomposite

A novel biosensor was fabricated based on the immobilization of tyrosinase and N ‐acetyl‐L ‐cysteine‐capped gold nanoparticles onto the surface of the glassy carbon electrode via the film forming by chitosan. The NAC‐AuNPs (N ‐acetyl‐L ‐cysteine‐capped gold nanoparticles) with the average size of 3.4 nm had much higher specific surface area and good biocompatibility, which were favorable for increasing the immobilization amount of enzyme, retaining the catalytic activity of enzyme and facilitating the fast electron transfer. The prepared biosensor exhibited suitable amperometric responses at −0.2 V for phenolic compounds vs. saturated calomel electrode. The parameters of influencing on the working electrode such as pH , temperature, working potential were investigated. Under optimum conditions, the biosensor was applied to detect catechol with a linear range of 1.0 × 10⁻⁷ to 6.0 × 10⁻⁵ mol•L⁻¹ , and the detection limit of 5.0 × 10⁻⁸ mol•L⁻¹ (S /N =3). The stability and selectivity of the proposed biosensor were also evaluated.     

Graphdiyne and Ionic Liquid Composite Modified Gold Electrode for Sensitive Voltammetric Analysis of Rutin

It is significant to develop a point-of-care testing (POCT) method for rapid detection of medicinal molecules. In this paper, a graphdiyne (GDY)-ionic liquid (IL) composite was prepared via one-step facile ultrasound preparation process and then modified on gold (Au) electrode surface by simple casting method. Scanning electron microscopy and transmission electron microscopy were used to characterize the morphology of GDY-IL composite. Cyclic voltammetric results proved that GDY-IL composite on the electrode surface could effectively improve electron transfer rate, which meant that GDY-IL composite had high conductivity with big surface area. Finally, the modified electrode exhibited excellent performances for rutin detection with wider linear range (8.0×10⁻⁹ mol L⁻¹–2.0×10⁻⁶ mol L⁻¹ and 2.0×10⁻⁶ mol L⁻¹–1.5×10⁻⁴ mol L⁻¹) and lower detection limit (2.7 nmol L⁻¹, 3S₀/S). The Nafion/GDY-IL/Au electrode showed good sensitivity and high selectivity, which was satisfactory in analytical application to real samples. Therefore, the GDY-IL composite modified electrode has the potential applications in the POCT for electrochemical analysis of various medicinal molecules.     

Acetone extracted propolis as a novel membrane and its application in phenol biosensors: the case of catechol

A novel biosensor for catechol has been constructed by immobilizing polyphenol oxidase (PPO) into acetone-extracted propolis (AEP) composite modified with gold nanoparticles (GNPs) and attached to multiwalled carbon nanotube (MWCNTs) on a gold electrode surface. The propolis for AEP was obtained from honeybee colonies. Under the optimum conditions, this method could be successfully used for the amperometric determination of catechol within a concentration range of 1 × 10⁻⁶ to 5 × 10⁻⁴ M, with a detection limit of 8 × 10⁻⁷ M (S/N = 3). The effects of pH and operating potential are also explored to optimize the measurement conditions. The best response was obtained at pH 5, while an optimum ratio of signal-to-noise (S/N) was obtained at −20 mV (versus Ag/AgCl), which was selected as the applied potential for the amperometric measurements. All subsequent experiments were performed at pH 5. Cyclic voltammetry and electrochemical impedance spectroscopy was used to characterize the PPO/CNTs/GNPs/AEP/Au biosensor. The biosensor also exhibited good selectivity, stability, and reproducibility.

     

固载于壳聚糖-纳米金复合膜修饰玻碳电极上的葡萄糖氧化酶的直接电化学研究及其生物传感应用

通过将葡萄糖氧化酶固载于壳聚糖-纳米金复合膜内所构置的传感器,实现了葡萄糖氧化酶的直接电化学,并采用循环伏安法与电化学阻抗法对修饰电极进行了表征。研究表明：在除氧缓冲溶液中,葡萄糖氧化酶-壳聚糖-纳米金复合膜修饰电极表现出一对良好的氧化还原峰,这对峰归因于葡萄糖氧化酶的氧化还原,证明葡萄糖氧化酶被成功固载于复合膜内。电子传递速率常数为15.6 s-1,说明葡萄糖氧化酶的电活性中心与电极之间的电子传递很快。将壳聚糖与纳米金相结合还提高了葡萄糖氧化酶在复合膜内的稳定性并保持其生物活性,并可以用于葡萄糖检测。计算得到其表观米氏常数为10.1 mmol·L-1。而且,该生物传感器可以用于血样中葡萄糖含量的测定。     

Choline Oxidase Based Composite ZrO2@AuNPs with Cu2O@MnO2 Platform for Signal Enhancing the Choline Biosensors

A novel metal composite material based on zirconium dioxide decorated gold nanoparticles (ZrO₂@AuNPs), copper (I) oxide at manganese (IV) oxide (Cu₂O@MnO₂) and immobilized choline oxidase (ChOx) onto a glassy carbon electrode (GCE) (ChOx/Cu₂O@MnO₂-ZrO₂@AuNPs/GCE) has been developed for enhancing the electro-catalytic property, sensitivity and stability of the amperometric choline biosensor. The ChOx/Cu₂O@MnO₂-ZrO₂@AuNPs/GCE displayed an excellent electrocatalytic response to the oxidation of the byproduct H₂O₂ from the choline catalyzed reaction, which exhibited a charge transfer rate constant (K_s) of 0.97 s⁻¹, a diffusion coefficient value (D) of 4.50×10⁻⁶ cm² s⁻¹, an electroactive surface area (A_e) of 0.97 cm² and a surface concentration (γ) of 0.54×10⁻⁸ mol cm⁻². The modified electrode also provided a wide linear range of choline concentration from 0.5 to 1,000.0 μM with good sensitivity (97.4 μA cm⁻² mM⁻¹) and low detection limit (0.3 μM). The apparent Michaelis-Menten constant was found to be 0.08 mM with I_max of 0.67 μA. This choline biosensor presented high repeatability (%RSD=2.9, n=5), excellent reproducibility (%RSD=2.9, n=5), long time of use (n=28 with %I>50.0 %) and good selectivity without interfering effects from possible electroactive species such as ascorbic acid, aspirin, amoxicillin, caffeine, dopamine, glucose, sucrose and uric acid. This optimal method was successfully applied for choline measurement in prepared human blood samples which demonstrated accurate and excellent reliability in the recovery range from 96.7 to 102.0 %.     

Amperometric Tyrosinase Biosensor Based on Carbon Black Paste Electrode for Sensitive Detection of Catechol in Environmental Samples

In this work, a renewable tyrosinase-based biosensor was developed for the detection of catechol, using a carbon black paste electrode, without any mediator. The effect of pH, type of electrolyte, and amount of tyrosinase enzyme were explored for optimum analytical performance. The best-performing biosensor in amperometric experiments at potential −0.2 V vs. Ag/AgCl (3 mol L⁻¹ KCl) was obtained using a 0.1 mol L⁻¹ phosphate buffer solution (pH 7.0) as electrolyte. Under optimized conditions, the proposed biosensor had two concentration linear ranges from 5.0×10⁻⁹ to 4.8×10⁻⁸ and from 4.8×10⁻⁸ to 8.5×10⁻⁶ mol L⁻¹ and a limit of detection of 1.5×10⁻⁹ mol L⁻¹. The apparent Michaelis-Menten constant ( ) was calculated by the amperometric method, and the obtained value was 1.2×10⁻⁵ mol L⁻¹ whose result was similar when compared with other studies previously. The biosensor was applied in river water samples, and the results were very satisfactory, with recoveries near 100 %. In addition, the response of this biosensor for different compounds, taking into account their molecular structures was investigated and the results obtained showed no interference with the response potential of catechol. The electrochemical biosensor developed in this work can be considered highly advantageous because it does not require the use of a mediator (direct detection) for electrochemical response, and also because it is based on a low-cost materials that can be used with success to immobilise other enzymes and/or biomolecules.     

A Novel Bioelectrochemical Sensor Based on Immobilized Urease on the Surface of Nickel Oxide Nanoparticle and Polypyrrole Composite Modified Pt Electrode

Nickel oxide nanoparticle (NiO?NP) and polypyrrole (PPy) composite were deposited on a Pt electrode for fabrication of a urea biosensor. To develop the sensor, a thin film of PPy?NiO composite was deposited on a Pt substrate that serves as a matrix for the immobilization of enzyme. Urease was immobilized on the surface of Pt/PPy?NiO by a physical adsorption. The response of the fabricated electrode (Pt/PPy?NiO/Urs) towards urea was analyzed by chronoamperometry and cyclic voltammetry (CV) techniques. Electrochemical response of the bio‐electrode was significantly enhanced. This is due to electron transfer between Ni²⁺ and Ni³⁺ as the electro‐catalytic group and the reaction between polypyrrole and the urease‐liberated ammonium. The fabricated electrode showed reliable and demonstrated perfectly linear response (0.7–26.7 mM of urea concentration, R²= 0.993), with high sensitivity (0.153 mA mM^?1 cm^?2), low detection of limit (1.6 μM), long stability (10 weeks), and low response time (～5 s). The developed biosensor was highly selective and obtained data were repeatable and reproduced using PPy‐NiO composite loaded with immobilized urease as urea biosensors.     

Electrochemical Study of Chitosan‐SiO2‐MWNT Composite Electrodes for the Fabrication of Cholesterol Biosensors

We report a novel composite electrode made of chitosan‐SiO₂‐multiwall carbon nanotube (CHIT‐SiO₂‐MWNT) composite coated on the indium‐tin oxide (ITO) glass substrate. Cholesterol oxidase (ChOx) was covalently immobilized on the CHIT‐SiO₂‐MWNT/ITO electrode that resulted in a ChOx/CHIT‐SiO₂‐MWNT/ITO cholesterolactive bioelectrode. The CHIT‐SiO₂‐MWNT/ITO and ChOx/CHIT‐SiO₂‐MWNT/ITO electrodes were characterized with Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The influence of various parameters was investigated, including the applied potential, pH of the medium, and the concentration of the enzyme on the performance of the biosensor. The cholesterol bioelectrode exhibited a sensitivity of 3.4 nA/ mgdL^?1 with a response time of five seconds. The biosensor using ChOx/CHIT‐SiO₂‐MWNT/ITO as the working electrode retained its original response after being stored for six months. The biosensor using ChOx/CHIT‐SiO₂‐MWNT/ITO as the working electrode showed a linear current response to the cholesterol concentration in the range of 50–650 mg/dL.     

Development of a hypoxanthine biosensor based on immobilized xanthine oxidase chemically modified electrode

An amperometric biosensor for hypoxanthine determination has been developed. The sensor uses a Nafion-paraquat chemically modified glassy-carbon electrode. It detects the oxygen consumed by the enzymatic reaction catalyzed by xanthine oxidase which is immobilized on the electrode surface. The sensor responds linearly to hypoxanthine over the concentration range of 1 × 10⁻⁶ M −2 × 10⁻⁴ M. The biosensor can be reused for more than 100 times without significant deterioration in performance. After 32 days storage at 3–5°C, the sensor response remains at 68% of the initial level. The high sensitivity, selectivity and stability of this biosensor demonstrates its practical applicability for a simple, rapid and economical determination of hypoxanthine in fish samples.     

A No-washing Point-of-Care Electrochemical Biosensor Based on CuS Nanoparticles for Rapid and Sensitive Detection of Neuron-specific Enolase

Electrochemical biosensors have made outstanding achievements in recent years. However, the single pursuit of sensitivity and accuracy sometimes cannot meet the detection requirements and achieve high-efficiency measurements. Therefore, no-washing biosensors have more practical advantages. In this work, a disposable point-of-care (POC) electrochemical biosensor was designed for the sensitive and fast detection of neuron-specific enolase (NSE). Fe₃O₄ and CuS nanoparticles were used as the substrate material for capturing Ab₁ and the signal probe for labeling Ab₂ respectively. The disposable syringe filter was introduced into the determination procedure for simple sample separation, which easily realized no-washing detection. Due to the syringe filters with 200 nm pore diameter could only allow the small nanoparticles of CuS−Ab₂ pass through, the large-sized immunocomplex of Fe₃O₄−Ab₁/NSE/CuS−Ab₂ were blocked on the membrane. The uncombined CuS−Ab₂ particles were pushed out from the syringe and would occur electron transfer between Cu²⁺ and Cu⁺ to generate a current signal detected by the Au electrode. Under optimal conditions, the no-washing biosensor shows a wide linear concentration range (100 fg mL⁻¹∼50 ng mL⁻¹) with the limit of detection of 33 fg mL⁻¹ (S/N=3). Additionally, the biosensor exhibited excellent selectivity, storage stability and reproducibility. The outstanding advantages of the no-washing biosensor make it more suitable for POC testing.