Hybridization of oligonucleotide by using DNA self-assembled monolayer

The interaction between DNA immobilized on surface and oligonucleotides at the interface is important in detection and diagnostic processes. However, it is difficult to immobilize DNA with maintaining its activity and to realize an efficient hybridization in previous methods. Here, to establish a novel DNA-functionalized surface, the DNA self-assembled monolayer (SAM) was constructed on a gold substrate using thiolated DNA composed of double-stranded (ds) and single-stranded (ss) portion. The DNA SAM was characterized by surface plasmon resonance (SPR), XPS. The hybridization of ss portion of DNA was attempted using the SAM, and in situ monitored by SPR. XPS measurement indicated that the thiolated DNA could form a stable monolayer on a gold substrate through sulfur–gold interaction. SPR measurement implied that the long axis of the DNA standing on the substrate. These results indicated formation of the DNA SAM on the substrate. Hybridization of target DNA containing a complementary sequence for the probe portion was observed by SPR. Moreover, one mismatch of oligonucleotide could be distinguished using the DNA SAM. The SPR result indicates that hybridization of target DNA and probe DNA on the DNA SAM occurs on the DNA SAM.     

Gold nanoparticles chemisorbed by a terphenyldithiol self-assembled monolayer for fabrication of a protein biosensor

In this study, improved detection of bovine serum albumin (BSA) was achieved by use of a fabricated surface plasmon resonance (SPR) biosensor. Terphenyldithiol (TPDT) was self-assembled on a gold substrate, then gold nanoparticles (Au-NPs) were chemisorbed on to the TPDT monolayer by strong bonding with the terminal thiol groups of the TPDT. The new sensor obtained was tested for immobilization of protein. The SPR results revealed much better detection of BSA by Au-NPs chemisorbed on the TPDT self-assembled monolayer (SAM) than by the bare SAM on the gold substrate.     

Preparation and characterization of thin films of SiO(x) on gold substrates for surface plasmon resonance studies

We report here on the fabrication and characterization of stable thin films of amorphous silica (SiO(x)) deposited on glass slides coated with a 5 nm adhesion layer of titanium and 50 nm of gold, using the plasma-enhanced chemical vapor deposition (PECVD) technique. The resulting surfaces were characterized using atomic force microscopy (AFM), ellipsometry, contact angle measurements, and surface plasmon resonance (SPR). AFM analysis indicates that homogeneous films of silica with low roughness were formed on the gold surface. The deposited silica films showed excellent stability in different solvents and in piranha solution. There was no significant variation in the thickness or in the SPR signal after these harsh treatments. The Au/SiO(x) interfaces were investigated for their potential applications as new surface plasmon resonance sensor chips. Silica films with thicknesses up to 40 nm allowed visualization of the surface plasmon effect, while thicker films resulted in the loss of the SPR characteristics. SPR allowed further the determination of the silica thickness and was compared to ellipsometric results. Chemical treatment of the SiO(x) film with piranha solution led to the generation of silanol surface groups that have been coupled with a trichlorosilane.     

Fabrication of SPR Nanosensor Using Gold Nanoparticles and Self-Assembled Monolayer Technique for Detection of Cu2+ in an Aqueous Solution

In this work, we investigated the fabrication of surface plasmon resonance (SPR) nanosensor using gold nanoparticles (AuNPs) chemisorbed onto self assembled monolayer of 10-(3-amino phenoxy) decane-1-thiol on gold substrate. The fabrication process of SPR nanosensor was characterized using different techniques such as infrared reflection-absorption spectra (IRRAS), xX-ray photoelectron spectroscopy (XPS), and atomic force microscope (AFM). The fabricated SPR nanosensor was used for detection of Cu²⁺ in an aqueous solution using surface plasmon resonance refractometer. The results confirm the fabrication of new SPR nanosensor. The fabricated SPR nanosensor showed a good activity toward the detection of Cu²⁺. The detection of Cu²⁺ in an aqueous solution using the fabricated SPR nansensor was enhanced in the presence of gold nanoparticles.     

Surface characterization and efficiency of a matrix-free and flat carboxylated gold sensor chip for surface plasmon resonance (SPR)

We report the preparation and characterization of a matrix-free carboxylated surface plasmon resonance (SPR) sensor chip with high sensing efficiency by functionalizing a bare gold thin film with a self-assembled monolayer of 16-mercaptohexadecanoic acid (SAM–MHDA chip). The self assembled monolayer surface coverage of the gold layer was carefully evaluated and the SAM was characterized by infrared reflection absorption spectroscopy, X-ray photoemission spectroscopy, atomic force microscopy, X-ray reflectivity-diffraction, and SPR experiments with bovine serum albumin. We compared the SPR signal obtained on this chip made of a dense monolayer of carboxylic acid groups with commercially available carboxylated sensor chips built on the same gold substrate, a matrix-free C1 chip, and a CM5 chip with a ~100 nm dextran hydrogel matrix (GE Healthcare). Two well-studied interaction types were tested, the binding of a biotinylated antibody (immunoglobulin G) to streptavidin and an antigen–antibody interaction. For both interactions, the well characterized densely functionalized SAM–MHDA chip gave a high signal-to-noise ratio and showed a gain in the availability of immobilized ligands for their partners injected in buffer flow. It thus compared favourably with commercially available sensor chips.     

Phosphatidylserine/Cholesterol Bilayers Supported on a Polycation/Alkylthiol Layer Pair

1-Stearoyl-2-oleoyl phosphatidylserine (SOPS)/cholesterol bilayers, supported on a polycation/alkylthiol layer pair on a gold surface, were investigated by surface plasmon resonance (SPR) and fluorescence recovery after photobleaching. The substrate was formed by electrostatic adsorbance of a hydrated poly(diallyldimethylammonium chloride) (PDDA) layer on the negatively charged surface of a self-assembled monolayer of 11-mercaptoundecanoic acid (MUA) on gold. Lipid membranes with different SOPS/cholesterol compositions were deposited on the PDDA/MUA layer pair by vesicle fusion. When the cholesterol content was below 20%, single bilayers were deposited. Fluorescence recovery after the bleaching experiments revealed that the SOPS/cholesterol bilayers were mobile at room temperature; lateral diffusion coefficients of a fluorescence probe were approximately 1x10(-9) cm(2)/s. The kinetics of the addition of the ion-channel-forming peptide gramicidin to the supported bilayers was detected by SPR. Copyright 2000 Academic Press.     

A novel Surface Plasmon Resonance enhanced Total Internal Reflection Ellipsometric application: electrochemically grafted isophthalic acid nanofilm on gold surface

The scope of this study is to modify a Surface Plasmon Resonance (SPR) sensor slide with isophthalic acid to evaluate the possible application on the detection of copper(II) ions in aqueous media by total internal reflection ellipsometry. A gold sensor surface was modified by an electrochemical diazonium reduction modification method. The modified surfaces are characterized with cyclic voltammetry (CV) and ellipsometry. Isophthalic acid monolayer modified gold slides were used for in situ detection of aqueous Cu(2+) solution with the SPR enhanced total internal reflection ellipsometry (SPRe-TIRE) technique. Layer formation, pH dependency of adsorption, sensor response of the SPRe-TIRE and isothermal kinetic parameters were examined. A high dependency on the number of CV cycles in the monolayer-multiple layer transition was observed. The suggested sensor gave a linear response over a wide range of Cu(2+) concentrations. It was also reported that adsorption on the SPRe-TIRE sensor gave Langmuir adsorption model behavior.     

湿化学镀SPR金基底及其性能表征

建立一种由单一水相操作的表面等离子体共振法(SPR)制备金基底.即:在3-氨基丙基三甲氧基硅烷(APTMS)修饰的玻璃片上自组装一层细小的金胶纳米粒子,以此为催化模板,利用化学镀技术在纳米尺度范围内控制金膜的均匀增长,获得优异SPR信号响应所需要的金膜形貌和厚度.紫外光谱(UV-vis),透射电镜(TEM)观测表明,纳米金膜催化模板粒径约为2.5 nm.扫描电镜(SEM)观察湿化学镀SPR金基底均匀分布,粒径约为40 nm.与商品化真空镀金基底相比,湿化学镀金基底对乙醇的SPR响应强度相当,且可调控性更高.     

Building a novel vitronectin assay by immobilization of integrin on calixarene monolayer

Membrane proteins possess significant hydrophobic domains and are likely to deplete their native activity immobilized on the solid surface relative to those occurring in a membrane environment. To investigate an efficient immobilization method, calix[4]crown-ether monolayer as an artificial protein linker system was constructed on the gold surface and characterized by Fourier transform infrared reflection absorption spectroscopy (FTIR-RAS), atomic force microscopy (AFM) and cyclic voltammetry (CV). Integrin alpha(v)beta3 was functionally immobilized onto the monolayer and the integrin-vitronectin interaction was investigated by surface plasmon resonance (SPR). It was found that calix[4]crown-ether was assembled as a monolayer on the gold surface. Orientation and accessibility of integrin alpha(v)beta3 was assessed by sensitive binding of its natural ligand, vitronectin at pg mL(-1) level. Moreover, surface coverage of integrin layer and thickness calculated through SPR curve simulation verified that integrin layer was a monolayer in activated form. In combination with the SPR method, this calix[4]crown monolayer provided a reliable and simple experimental platform for the investigation of isolated membrane proteins under experimental conditions resembling those of their native properties.     

Polymeric optical microscreen for high-resolution surface plasmon resonance microarray imaging

In this study, we demonstrate a simple method to fabricate surface plasmon resonance (SPR) imaging microarrays using polymer micropatterns. The use of a micrometer-scale polymeric optical screen (microPOS) passivates the region deposited with polymer by completely removing SPR signals or by saturating the SPR signal far beyond the detection range of SPR imaging. Two schemes were suggested to create a surface microPOS by either micropatterning a thick insulating layer before deposition of a metal layer (complete removal of SPR) or after deposition of a metal layer (saturation of SPR signal). The two schemes were successfully applied for the imaging of biological adsorption with a high imaging resolution of approximately 100 microm/pattern and 10 microm separation. The validity of the system was verified with a biotin-streptavidin system as a model for the systematic binding of biomolecules. Further, binding of prostate-specific antigen (PSA) onto the anti-PSA SPR microarray was demonstrated as a useful method for detecting a cancer marker.     

Analysis of immunoreaction with localized surface plasmon resonance biosensor

The localized surface plasmon resonance (LSPR)-based optical biosensor was used as a potential tool for label-free detection of immunoreaction. The glass substrate covered with the self-assembled monolayer (SAM) of gold colloids was used widely in the sensors. Here, the glass substrate was modified by chemical hydroxylation first, and then gold colloids were immobilized on the substrate by electrostatic adsorption. The LSPR spectra were obtained on UV–vis absorption spectrometer. The specificity was examined by extensive nonspecific binding tests. The resonance condition on the local dielectric environment enables a simple form of molecular sensing. The binding of analyte to the biosensor surface causes a change in the absorbance which was responsive to the concentration of human IgG. So, the LSPR sensing yields similar results to the SPR technique, yet with much simpler instrument.     

Electrochemical and STM studies of 1-thio-β-D-glucose self-assembled on a Au(111) electrode surface

In this study, a Au(111) electrode is functionalized with a monolayer of 1-thio-β-D-glucose (β-Tg), producing a hydrophilic surface. A monolayer of β-Tg was formed on a Au(111) surface by either (1) potential-assisted deposition with the thiol in a supporting electrolyte or (2) passive incubation of a gold substrate in a thiol-containing solution. For each method, the properties of the β-Tg monolayer were investigated using cyclic voltammetry (CV), differential capacitance (DC), and chronocoulometry. In addition, electrochemical scanning tunneling microscopy (EC-STM) was used to obtain images of the self-assembled monolayer with molecular resolution. Potential-assisted assembly of β-Tg onto a Au(111) electrode surface was found to be complicated by oxidation of β-Tg molecules. The EC-STM images revealed formation of a passive layer containing honeycomb-like domains characteristic of a formation of S(8) rings, indicating the S-C bond may have been cleaved. In contrast, passive self-assembly of thioglucose from a methanol solution was found to produce a stable, disordered monolayer of β-Tg. Since the passive assembly method was not complicated by the presence of a faradaic process, it is the method of choice for modifying the gold surface with a hydrophilic monolayer.     

Electrochemical Surface Plasmon Resonance Spectroscopy at Bilayered Silver/Gold Films

Bilayered silver/gold films (gold deposited on top of the silver film) were used as substrates for electrochemical surface plasmon resonance spectroscopy (EC-SPR). EC-SPR responses of electrochemical deposition/stripping of copper and redox-induced conformation changes of cytochrome c immobilized onto self-assembled monolayers preformed at these substrates were measured. Influence of the Ag layer thickness and the double-layer capacitance on the EC-SPR behavior was investigated. The results demonstrated that the bilayered Ag/Au metal films produce a sharper SPR dip profile than pure Au films and retain the high chemical stability of Au films. Contrary to the result by the Fresnel calculation that predicts a greater fraction of Ag in the bilayered film should result in a greater signal-to-noise ratio, the EC-SPR sensitivity is dependent on both the Ag/Au thickness ratio and the chemical modification of the surface. Factors affecting the overall SPR sensitivity at the bilayered films, such as the film morphology, potential-induced excess surface charges, and the adsorbate layer were investigated. Forming a compact adsorbate layer at the bilayered film diminishes the effect of potential-induce excess surface charges on the SPR signal and improves the overall EC-SPR sensitivity. For the case of redox-induced conformation changes of cytochrome c, the SPR signal obtained at the bilayered silver/gold film is 2.7 times as high as that at a pure gold film.     

Labeled gold nanoparticles immobilized at smooth metallic substrates: systematic investigation of surface plasmon resonance and surface-enhanced Raman scattering

This paper experimentally and theoretically investigates the influence of an underlying metallic substrate (i.e., gold and silver) on the surface plasmon resonance (SPR) of labeled gold nanoparticles and the concomitant impact on the surface-enhanced Raman scattering (SERS) signal from the labels. These experiments employ nanoparticles of varied sizes (30-100 nm) that are coated with a bifunctional Raman scatterer composed of (1) a disulfide for chemisorption to the nanoparticle surface, (2) a succinimidyl ester for formation of a covalent linkage to an amine-terminated self-assembled monolayer on the underlying substrate, and (3) an aryl nitro group with an intrinsically strong Raman active vibrational mode. This approach allows facile systematic assessments of how variations in nanoparticle size, substrate composition, and the gap between the nanoparticle and substrate affect the SPR of the bound particles. Both UV-vis transmission and reflection absorption (incident angle of 58 degrees ) spectroscopy are used to characterize the effect of each of these parameters on SPR. These results are then correlated with SERS enhancement factors (EFs) that were determined by accounting for particle surface concentrations, which were measured by atomic force microscopy, and the absolute number of labels, which were calculated on the basis of the surface area of each of the different-sized particles. All SERS spectra were collected at an incident angle of 58 degrees with respect to the surface normal. As expected, the SPR for particles in solution red-shifts with increasing particle size. More importantly, the SPR moves to even longer wavelengths as the size of immobilized particles increases and as the gap between the immobilized particle and substrate decreases. The red shift is also greater for a gold nanoparticle tethered to a gold substrate compared to a silver substrate. A theoretical model for the extinction of a particle above a flat substrate, corrected for surface scattering, radiation damping, and dynamic depolarization, is also briefly detailed. SPR results calculated with the model are consistent with the shifts observed in the SPR position for each of the manipulated experimental variables. The largest EFs are found for samples with an SPR maximum (lambda(max)) between the wavelengths for laser excitation (633 nm) and the Raman band for the symmetric nitro stretch of the particle coating (690 nm). As an example, an order of magnitude in the SERS enhancement factor is gained for a 60-nm particle immobilized 1.2 nm above a gold substrate (SPR lambda(max) = 657 nm) compared to that for a 30-nm particle (SPR lambda(max) = 596 nm).     

Characterization of pore formation by streptolysin O on supported lipid membranes by impedance spectroscopy and surface plasmon resonance spectroscopy

We report the study of the interactions of bacterial toxin streptolysin O (SLO) and cholesterol-containing membranes using electrochemical impedance and surface plasmon resonance (SPR) spectroscopy at low hemolytic units on a novel supported membrane interface. The detailed understanding of the process will aid significantly the construction of nanoscale transport channels for biosensing applications. Cholesterol-containing egg PC vesicles, pristine and incubated with SLO toxin, were fused onto a hexyl thioctate (HT)-modified gold substrate. The charge-transfer resistance of the resulting lipid membrane, which is related to the formation of the transmembrane pores, is measured with the aid of an electroactive probe. Impedance spectra were collected over a range of 0.1-100 kHz, and the obtained complex resistance was fit to an equivalent circuit. The charge-transfer resistance decreases for increasing SLO concentration, following a first-order exponential decay. The two-part membrane interface was further characterized with SPR spectroscopy. For the hexyl thioctate support layer, an equivalent monolayer thickness of 1.3 nm was determined. This value suggests a loosely packed structure of the monolayer on gold, presenting an ideal platform for permeability studies. A comparative study on the fusion behavior of vesicles with and without SLO induced pores revealed no substantial difference for the two systems, indicating that the pore formation has no adverse effect on the integrity of the vesicles. The resulting lipid membrane thickness from pre-perforated lipids was found to be 3.2 nm, suggesting that one leaflet is knocked off during the fusion process and a hybrid membrane is formed. A slightly higher thickness value of 3.4 nm was obtained for membranes from non-perforated vesicles. Deposition of lipids and subsequent incubation with SLO, as monitored by SPR, shows that the HT surface chemistry allows partial insertion of the toxin into the membrane, indicating unique properties as compared to the previously explored long-chain alkylthiols.     

Preparation and properties of silica–gold core–shell particles

Silica-metal core–shell particles, as for instance those having siliceous core and nanostructured gold shell, attracted a lot of attention because of their unique properties resulting from combination of mechanical and thermal stability of silica and magnetic, electric, optical and catalytic properties of metal nanocrystals such as gold, silver, platinum and palladium. Often, the shell of the core–shell particles consists of a large number of metal nanoparticles deposited on the surface of relatively large silica particles, which is the case considered in this work. Namely, silica particles having size of about 600 nm were subjected to surface modification with 3-aminopropyltrimethoxysilane. This modification altered the surface properties of silica particles, which was demonstrated by low pressure nitrogen adsorption at ?196 °C. Next, gold nanoparticles were deposited on the surface of aminopropyl-modified silica particles using two strategies: (i) direct deposition of gold nanoparticles having size of about 10 nm, and (ii) formation of gold nanoparticles by adsorption of tetrachloroauric acid on aminopropyl groups followed by its reduction with formaldehyde.The overall morphology of silica–gold particles and the distribution of gold nanoparticles on the surface of modified silica colloids were characterized by scanning electron microscopy. It was shown that direct deposition of colloidal gold on the surface of large silica particles gives more regular distribution of gold nanopartciles than that obtained by reduction of tetrachloroauric acid. In the latter case the gold layer consists of larger nanoparticles (size of about 50 nm) and is less regular. Note that both deposition strategies afforded silica–gold particles having siliceous cores covered with shells consisting of gold nanoparticles of tunable concentration.     

介孔SiO_2薄膜增敏SERS基底在消逝波激励下的特性表征

采用溶胶-凝胶分子模板法在50 nm厚金膜表面制备约40 nm厚介孔二氧化硅(MPS)薄膜,然后在MPS薄膜表面静电自组装金纳米粒子(GNP)单层膜,形成的多层膜结构用作表面增强拉曼散射(SERS)基底.利用扫描电镜观测到MPS薄膜具有表面开口多孔结构,有助于小分子向薄膜内快速扩散.基于时域有限差分(FDTD)方法对电场分布的仿真结果指出,在表面等离子体共振(SPR)条件下分布于金膜与GNP之间的消逝场显著增强.由于空间重叠,该增强场能够高效激发MPS内富集的小分子拉曼信号,产生的拉曼信号还可免受金属作用的干扰.利用Kretschmann结构和尼罗蓝(NB)拉曼活性分子测试了Au/MPS/GNP基底在785 nm激发波长下的SERS效果,并与Au/GNP基底进行了比较.结果表明,在SPR条件下,Au/MPS/GNP基底能够导致较强的定向和背向拉曼信号,而且在586 cm-1处的背向拉曼信号强度是Au/GNP基底的40倍,这归功于MPS薄膜.进一步测试表明背向拉曼信号强度与NB浓度成正相关.这意味着Au/MPS/GNP基底具有良好的半定量检测本领.     

Self-assembled supramolecular array of polymeric phthalocyanine on gold for the determination of hydrogen peroxide

This Article describes for the first time the formation of a supramolecular self-assembled monolayer of polymeric phthalocyanine (poly(CuPc)) onto a gold substrate. The latter is established through the interaction of the cyano group, belonging to the poly(CuPc), with the metal substrate. The functionalized gold substrate was characterized using Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and electrochemical methods. Results clearly demonstrated the interaction between gold and the nitrogen atom of cyano group and showed at the same time the formation of a completely covered polymeric monolayer on the gold surface. In addition, the modified gold surface seems to exhibit a reversible redox behavior and is found to act as an electronic conductor, which allows rapid electron transfer. Electrochemical impedance spectroscopy (EIS) analyses in the presence of [Fe(CN)(6)](3-/4-) as a redox couple revealed that the modified electrode showed a much lower electron transfer resistance compared with bare gold. In addition, the modified electrode is found to catalyze the H(2)O(2) reduction very effectively, showing a catalytic current that varies linearly with the peroxide concentration in the range of 0.35 to 70 μM with a detection limit of 0.25 μM.     

Determination of thickness, dielectric constant of thiol films, and kinetics of adsorption using surface plasmon resonance

This paper describes the formation of a self-assembled monolayer of 11-mercaptoundecanoic acid (MUA) under different concentrations on a gold sensor disk, monitoring in situ and in real time using surface plasmon resonance spectroscopy (SPR). The film thickness and dielectric constant were determined for a fully formed monolayer using one-color approach SPR. The kinetic studies of the film formation in ethanol solution indicated that the self-assembled monolayer is formed in a two-step adsorption process. In this sense, this unpublished route was applied on the basis of a model where many molecules are adsorbed at an initial step and then can be desorbed and/or rearranged to form a perfect monolayer.     

Protein recognition by a self-assembled deep cavitand monolayer on a gold substrate

This paper details the first use of a self-folding deep cavitand on a gold surface. A sulfide-footed deep, self-folding cavitand has been synthesized, and its attachment to a cleaned gold surface studied by electrochemical and SPR methods. Complete monolayer formation is possible if the cavitand folding is templated by noncovalent binding of choline or by addition of space-filling thiols to cover any gaps in the cavitand adsorption layer. The cavitand is capable of binding trimethylammonium-tagged guests from an aqueous medium and can be deposited in 2 × 2 microarrays on the surface for characterization by SPR imaging techniques. When biotin-labeled guests are used, the cavitand:guest construct can recognize and immobilize streptavidin proteins from aqueous solution, acting as an effective supramolecular biosensor for monitoring protein recognition.