Growth of sputter-deposited gold nanoparticles in ionic liquids

The growth of gold nanoparticles (NPs) synthesized by sputter deposition on an ionic liquid surface is studied in situ in the bulk phase of the ionic liquids (ILs) 1-butyl-3-methylimidazolium dicyanamide [C(1)C(4)Im][N(CN)(2)], 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)amide [C(1)C(4)Im][Tf(2)N], 1-butyl-3-methylimidazolium tetrafluoroborate [C(1)C(4)Im][BF(4)], 1-butyl-3-methylimidazolium hexafluorophosphate [C(1)C(4)Im][PF(6)] and 1-butyl-3-methylimidazolium triflate [C(1)C(4)Im][TfO]. It is found that primary nanoparticles with a diameter smaller than 2.5 nm are present in the sample immediately after sputtering. Growth of these primary particles proceeds after the end of the sputtering process and stops when the nanoparticles reach a certain size. Depending on the viscosity of the ionic liquid this growth process can proceed several hours to several days. The growth speed is fastest for the least viscous ionic liquid and follows the trend [C(1)C(4)Im][N(CN)(2)] > [C(1)C(4)Im][Tf(2)N] > [C(1)C(4)Im][TfO] > [C(1)C(4)Im][BF(4)] > [C(1)C(4)Im][PF(6)]. It is also found that a higher concentration of sputtered gold results in faster growth of the gold nanoparticles. A discussion on the growth mechanism of sputtered gold NPs is included.     

XIm][FeI(CO)(3)(SnI(3))(2)] (XIm: EMIm, EHIm, PMIm) containing a barbell-shaped FeSn(2)-carbonyl complex

By reacting Fe(CO)(5) and SnI(4) in the ionic liquids [XIm][NTf(2)] (XIm: 1-ethyl-3-methylimidazolium/EMIm, 1-ethyl-imidazolium/EHIm, 1-propyl-3-methylimidazolium/PMIm; NTf(2): bistrifluoridomethansulfonimide), the compounds [XIm][FeI(CO)(3)(SnI(3))(2)] are obtained as transparent, dark red crystals. According to single-crystal structure analysis, the title compounds crystallize monoclinically and contain the anionic carbonyl complex [FeI(CO)(3)(SnI(3))(2)](-) as well as [EMIm](+), [EHIm](+) or [PMIm](+) cations. The anionic carbonyl is composed of a Sn-Fe-Sn barbell-shaped building unit with Fe-Sn distances of 252.0(1) pm. Herein, tin is coordinated distorted tetrahedrally by iodine; iron is coordinated pseudo-octahedrally by three carbonyl ligands, one iodine atom and two tin atoms. Bonding situation and valence state are investigated in detail for [EMIm][FeI(CO)(3)(SnI(3))(2)] based on bond-lengths considerations, infrared spectroscopy, M?ssbauer spectroscopy, density functional theory and DFT-based Mulliken population analysis. Hence, the formal oxidation state of the metal atoms can be concluded to Fe(±0) and Sn(3+).     

Unexpected reduction pathway of a Co(2+) salt to [HCo(CO)(4)] via [Co(2)(CO)(8)] in an ionic liquid

In the 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide ionic liquid ([BMI][NTf(2)]), [Co(NTf(2))(2)] is reduced under 5.5 MPa of H(2)-CO to [Co(2)(CO)(8)] prior to [HCo(CO)(4)], provided a pyridine ligand is present in the medium.     

Thermochemistry of imidazolium-based ionic liquids: experiment and first-principles calculations

In this work the molar enthalpy of formation of the ionic liquid 1-ethyl-3-methylimidazolium dicyanoamide in the gaseous phase [C(2)MIM][N(CN)(2)] was measured by means of combustion calorimetry and enthalpy of vaporization using transpiration. Available, but scarce, primary experimental results on enthalpies of formation of imidazolium based ionic liquids with the cation [C(n)MIM] (where n = 2 and 4) and anions [N(CN)(2)], [NO(3)] and [NTf(2)] were collected and checked for consistency using a group additivity procedure. First-principles calculations of the enthalpies of formation in the gaseous phase for the ionic liquids with the common cation [C(n)MIM] (where n = 2 and 4) and with the anions [N(CN)(2)], [NO(3)], [NTf(2)], [Cl], [BF(4)] and [PF(6)] have been performed using the G3MP2 theory. It has been established that the gaseous phase enthalpies of formation of these ionic liquids obey the group additivity rules.     

(2)(∞)[Co{1,4-C6H4(CN)2}2{NTf2}2][SnI{Co(CO)4}3](2)--a 2D coordination network with an intercalated carbonyl cluster

Dark red transparent crystals of [Co{1,4-C(6)H(4)(CN)(2)}(2){NTf(2)}(2)][SnI{Co(CO)(4)}(3)](2) are obtained by reacting SnI(4), Co(2)(CO)(8) and 1,4-C(6)H(4)(CN)(2) in the ionic liquid [EMIm][NTf(2)] (EMIm: 1-ethyl-3-methylimidazolium; NTf(2): bis(trifluoromethylsulfonyl)imide). According to X-ray structure analysis based on single crystals, the title compound crystallizes in a triclinic manner and contains the novel (2)(∞)[Co{1,4-C(6)H(4)(CN)(2)}(2){NTf(2)}(2)] coordination network. This infinite 2D network is composed of Co(2+) ions that are planarily interlinked by four 1,4-dicyanobenzene ligands. As a non-charged 2D network, Co(2+) is furthermore coordinated by two [NTf(2)](-) anions. The (2)(∞)[Co{1,4-C(6)H(4)(CN)(2)}(2){NTf(2)}(2)] layers are stacked on top of each other with SnI[Co(CO)(4)](3) molecules intercalated in distorted cubic gaps between the layers. The title compound is furthermore characterized by energy dispersive X-ray (EDX) analysis, thermogravimetry (TG), infrared spectroscopy (FT-IR) and optical spectroscopy (UV-Vis).     

Dinuclear iron(II)-cyanocarbonyl complexes linked by two/three bridging ethylthiolates: relevance to the active site of [Fe] hydrogenases

Dinuclear iron(II)-cyanocarbonyl complex [PPN](2)[Fe(CN)(2)(CO)(2)(mu-SEt)](2) (1) was prepared by the reaction of [PPN][FeBr(CN)(2)(CO)(3)] and [Na][SEt] in THF at ambient temperature. Reaction of complex 1 with [PPN][SEt] produced the triply thiolate-bridged dinuclear Fe(II) complex [PPN][(CN)(CO)(2)Fe(mu-SEt)(3)Fe(CO)(2)(CN)] (2) with the torsion angle of two CN(-) groups (C(5)N(2) and C(3)N(1)) being 126.9 degrees. The extrusion of two sigma-donor CN(-) ligands from Fe(II)Fe(II) centers of complex 1 as a result of the reaction of complex 1 and [PPN][SEt] reflects the electron-rich character of the dinuclear iron(II) when ligated by the third bridging ethylthiolate. The Fe-S distances (2.338(2) and 2.320(3) A for complexes 1 and 2, respectively) do not change significantly, but the Fe(II)-Fe(II) distance contracts from 3.505 A in complex 1 to 3.073 A in complex 2. The considerably longer Fe(II)-Fe(II) distance of 3.073 A in complex 2, compared to the reported Fe-Fe distances of 2.6/2.62 A in DdHase and CpHase, was attributed to the presence of the third bridging ethylthiolate, instead of pi-accepting CO-bridged ligand as observed in [Fe] hydrogenases. Additionally, in a compound of unusual composition ([Na.(5)/(2)H(2)O][(CN)(CO)(2)Fe(mu-SEt)(3)Fe(CO)(2)(CN)])(n)((1)/(2)O(Et)(2))(n) (3), the Na(+) cations and H(2)O molecules combining with dinuclear [(CN)(CO)(2)Fe(mu-SEt)(3)Fe(CO)(2)(CN)](-) anions create a polymeric framework wherein two CN(-) ligands are coordinated via CN(-)-Na(+)/CN(-)-(Na(+))(2) linkages, respectively.     

Preparation and characterization of ultrathin [Ru(CO)3Cl2]2 and [BMIM][Tf2N] films on Al2O3/NiAl(110) under UHV conditions

Towards a better understanding of the interface chemistry of ionic liquid (IL) thin film catalytic systems we have applied a rigorous surface science model approach. For the first time, a model homogeneous catalyst has been prepared under ultrahigh vacuum conditions. The catalyst, di-μ-chlorobis(chlorotricarbonylruthenium) [Ru(CO)(3)Cl(2)](2), and the solvent, the IL 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [BMIM][Tf(2)N], have been deposited by physical vapor deposition onto an alumina model support [Al(2)O(3)/NiAl(110)]. First, the interaction between thin films of [Ru(CO)(3)Cl(2)](2) and the support is investigated. Then, the ruthenium complex is co-deposited with the IL and the influence of the solvent on the catalyst is discussed. D(2)O, which is a model reactant, is further added. Growth, surface interactions, and mutual interactions in the thin films are studied with IRAS in combination with density functional (DFT) calculations. At 105 K, molecular adsorption of [Ru(CO)(3)Cl(2)](2) is observed on Al(2)O(3)/NiAl(110). The IRAS spectra of the binary [Ru(CO)(3)Cl(2)](2) + [BMIM][Tf(2)N] and ternary [Ru(CO)(3)Cl(2)](2) + [BMIM][Tf(2)N] + D(2)O show every characteristic band of the individual components. Above 223 K, partial decomposition of the ruthenium complex leads to species of molecular nature attributed to Ru(CO) and Ru(CO)(2) surface species. Formation of metallic ruthenium clusters occurs above 300 K and the model catalyst decomposes further at higher temperatures. Neither the presence of the IL nor of D(2)O prevents this partial decomposition of [Ru(CO)(3)Cl(2)](2) on alumina.     

Nucleophilicity in ionic liquids. 2.(1) Cation effects on halide nucleophilicity in a series of bis(trifluoromethylsulfonyl)imide ionic liquids

In this work, the nucleophilicities of chloride, bromide, and iodide have been determined in the ionic liquids [bmim][N(Tf)(2)], [bm(2)im][N(Tf)(2)], and [bmpy][N(Tf)(2)] (where bmim = 1-butyl-3-methylimidazolium, bm(2)im = 1-butyl-2,3-dimethylimidazolium, bmpy = 1-butyl-1-methylpyrrolidinium, and N(Tf)(2) = bis(trifluoromethylsulfonyl)imide). It was found that in the [bmim](+) ionic liquid, chloride was the least nucleophilic halide, but that changing the cation of the ionic liquid affected the relative nucleophilicities of the halides. The activation parameters DeltaH(), DeltaS(), and DeltaG() have been estimated for the reaction of chloride in each ionic liquid, and compared to a similar reaction in dichloromethane, where these parameters were found for reaction by both the free ion and the ion pair.     

Kinetic study of the addition of trihalides to unsaturated compounds in ionic liquids. Evidence of a remarkable solvent effect in the reaction of ICl2-

The kinetic constants and activation parameters for the reactions of Br(3)(-) and ICl(2)(-) with some alkenes and alkynes have been determined in the ionic liquids [bmim][PF(6)], [emim][Tf(2)N], [bmim][Tf(2)N], [hmim][TF(2)N], [bm(2)im][Tf(2)N], and [bpy][TF(2)N] (where emim = 1-ethyl-3-methylimidazolium, bmim = 1-butyl-3-methylimidazolium, hmim = 1-hexyl-3-methylimidazolium, bm(2)im = 1-butyl-2,3-dimethylimidazolium, bpy = butylpyridinium, PF(6) = hexafluorophosphate, and Tf(2)N = bis(trifluoromethylsulfonyl)imide) and in 1,2-dichloroethane. The rates of both reactions increase on going from 1,2-dichloroethane to ILs. Evidence suggests that, while the hydrogen bonding ability of the imidazolium cation is probably the main factor able to increase the rate of the addition of ICl(2)(-) to double and triple bonds, this property has no effect on the electrophilic addition of Br(3)(-) to alkenes and alkynes. Furthermore, in the case of the ICl(2)(-) reaction, the hydrogen bonding ability of ILs can be exploited to suppress the unwanted nucleophilic substitution reaction on the products by the Cl(-) anion.     

The thermochemistry of solvation of imidazolium-based ionic liquids in benzene

ABSTRACT

The present work is devoted to the thermochemical study of solvation of ionic liquids (IL) in benzene. The solution enthalpies of 1-ethyl-3-methylimidazolium tricyanomethanide [EMIM][C(CN)₃], 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF₄], 1-hexyl-3-methylimidazolium hexafluorophosphate [HMIM][PF₆], 1-octyl-3-methylimidazolium tetrafluoroborate [OMIM][BF₄], 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [EMIM][NTf₂], 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [BMIM][NTf₂] and 1-butyl-3-methylimidazolium trifluoromethanesulfonate [BMIM][TfO] in benzene were measured. The solvation enthalpies of imidazolium-based IL were calculated. Molar refractions of imidazolium-based IL form literature data on density and refractive indexes of IL were also calculated. The linear correlation between solvation enthalpy and molar refraction of IL was observed. This correlation can be used to calculate the vaporization enthalpy of imidazolium-based IL from solution calorimetry data.     

Six-coordinate and five-coordinate Fe(II)(CN)(2)(CO)(x) thiolate complexes (x = 1, 2): synthetic advances for iron sites of [NiFe] hydrogenases

The dicyanodicarbonyliron(II) thiolate complexes trans,cis-[(CN)(2)(CO)(2)Fe(S,S-C-R)](-) (R = OEt (2), N(Et)(2) (3)) were prepared by the reaction of [Na][S-C(S)-R] and [Fe(CN)(2)(CO)(3)(Br)](-) (1). Complex 1 was obtained from oxidative addition of cyanogen bromide to [Fe(CN)(CO)(4)](-). In a similar fashion, reaction of complex 1 with [Na][S,O-C(5)H(4)N], and [Na][S,N-C(5)H(4)] produced the six-coordinate trans,cis-[(CN)(2)(CO)(2)Fe(S,O-C(5)H(4)N)](-) (6) and trans,cis-[(CN)(2)(CO)(2)Fe(S,N-C(5)H(4))](-) (7) individually. Photolysis of tetrahydrofuran (THF) solution of complexes 2, 3, and 7 under CO led to formation of the coordinatively unsaturated iron(II) dicyanocarbonyl thiolate compounds [(CN)(2)(CO)Fe(S,S-C-R)](-) (R = OEt (4), N(Et)(2) (5)) and [(CN)(2)(CO)Fe(S,N-C(5)H(4))](-) (8), respectively. The IR v(CN) stretching frequencies and patterns of complexes 4, 5, and 8 have unambiguously identified two CN(-) ligands occupying cis positions. In addition, density functional theory calculations suggest that the architecture of five-coordinate complexes 4, 5, and 8 with a vacant site trans to the CO ligand and two CN(-) ligands occupying cis positions serves as a conformational preference. Complexes 2, 3, and 7 were reobtained when the THF solution of complexes 4, 5, and 8 were exposed to CO atmosphere at 25 degrees C individually. Obviously, CO ligand can be reversibly bound to the Fe(II) site in these model compounds. Isotopic shift experiments demonstrated the lability of carbonyl ligands of complexes 2, 3, 4, 5, 7, and 8. Complexes [(CN)(2)(CO)Fe(S,S-C-R)](-) and NiA/NiC states [NiFe] hydrogenases from D. gigas exhibit a similar one-band pattern in the v(CO) region and two-band pattern in the v(CN) region individually, but in different positions, which may be accounted for by the distinct electronic effects between [S,S-C-R](-) and cysteine ligands. Also, the facile formations of five-coordinate complexes 4, 5, and 8 imply that the strong sigma-donor, weak pi-acceptor CN(-) ligands play a key role in creating/stabilizing five-coordinate iron(II) [(CN)(2)(CO)Fe(S,S-C-R)](-) complexes with a vacant coordination site trans to the CO ligand.     

Surface tension of binary mixtures of imidazolium and ammonium based ionic liquids with alcohols, or water: cation, anion effect

The surface tensions were measured at atmospheric pressure, with use of a ring tensiometer, of a series of alcoholic solutions of closely related ionic liquids: 1-methyl-3-methylimidazolium methylsulfate, [MMIM][CH3SO4] in alcohol (methanol, or ethanol, or 1-butanol at 298.15 K), 1-butyl-3-methylimidazolium methylsulfate, [BMIM][CH3SO4] in alcohol (methanol, or ethanol, or 1-butanol at 298.15 K), 1-butyl-3-methylimidazolium octylsulfate, [BMIM][OcSO4] in alcohol (methanol, or 1-butanol at 298.15 K) and of 1-hexyloxymethyl-3-methylimidazolium tetrafluoroborate, [C6H(13)OCH2MIM][BF4], 1,3-dihexyloxymethylimidazolium tetrafluoroborate, [(C6H13OCH2)2IM][BF4] in alcohol (methanol, or 1-butanol, or 1-hexanol at 308.15 and 318.5 K) and hexyl(2-hydroxyethyl)dimethylammonium bromide, C6Br in 1-octanol at 298.15 K. The set of ammonium ionic liquids of different cations and anions (C2Br, C2BF4, C2PF6, C2N(CN)2, C3Br, C4Br and C6Br) was chosen to show the influence of small amount of the ammonium ionic liquid on the surface tension of water at 298.15 K. The influence of the cation, or anion alkyl chain length on the properties under study (densities and surface tension) was tested.     

Thermodynamic modeling of the phase behavior of binary systems of ionic liquids and carbon dioxide with the group contribution equation of state

The group contribution equation of state (GC-EOS) was applied to predict the phase behavior of binary systems of ionic liquids of the homologous families 1-alkyl-3-methylimidazolium hexafluorophosphate and tetrafluoroborate with CO2. Pure group parameters for the new ionic liquid functional groups [-mim][PF6] and [-mim][BF4] and interaction parameters between these groups and the paraffin (CH3, CH2) and CO2 groups were estimated. The GC-EOS extended with the new parameters was applied to predict high-pressure phase equilibria in binary mixtures of the ionic liquids [emim][PF6], [bmim][PF6], [hmim][PF6], [bmim][BF4], [hmim][BF4], and [omim][BF4] with CO2. The agreement between experimental and predicted bubble point data for the ionic liquids was excellent for pressures up to 20 MPa, and even for pressures up to about 100 MPa, the agreement was good. The results show the capability of the GC-EOS to describe phase equilibria of systems consisting of ionic liquids.     

Microwave synthesis and inherent stabilization of metal nanoparticles in 1-methyl-3-(3-carboxyethyl)-imidazolium tetrafluoroborate

The synthesis of Co-NPs and Mn-NPs by microwave-induced decomposition of the metal carbonyls Co(2)(CO)(8) and Mn(2)(CO)(10), respectively, yields smaller and better separated particles in the functionalized IL 1-methyl-3-(3-carboxyethyl)-imidazolium tetrafluoroborate [EmimCO(2)H][BF(4)] (1.6 ± 0.3 nm and 4.3 ± 1.0 nm, respectively) than in the non-functionalized IL 1-n-butyl-3-methylimidazolium tetrafluoroborate [Bmim][BF(4)]. The particles are stable in the absence of capping ligands (surfactants) for more than six months although some variation in particle size could be observed by TEM.     

Solution structures of 1-butyl-3-methylimidazolium hexafluorophosphate ionic liquid saturated with CO2: Experimental evidence of specific anion-CO2 interaction

X-ray diffraction measurements for 1-butyl-3-methylimidazolium hexafluorophosphate ionic liquid ([BMIM][PF6])-CO2 systems were carried out at high pressures with a newly developed polymer cell. The intermolecular distribution functions (g(inter)(r)) were obtained at 25 degrees C for neat [BMIM][PF6] and its solutions saturated with CO2 at 4 and 15 MPa, where the mole fractions (x) of CO2 correspond to 0.5 and 0.7, respectively. In g(inter)(r) for x = 0.5, two peaks appeared at around 2.8 and 3.2 A. These two peaks in g(inter)(r) appreciably increased for x = 0.7; moreover, there was another peak observed at approximately 3.8 A. Only assuming the correlations between CO2 and [PF6]-, it is reasonably determined that the nearest-neighbor P([PF6]-). . .C(CO2) distances are 3.57 and 3.59 A with the coordination numbers being 1.8 and 4.0 for x = 0.5 and 0.7, respectively. It is concluded that CO2 molecules are preferentially solvated to the [PF6]- anion.     

The enthalpies of vaporisation of ionic liquids: new measurements and predictions

The enthalpies of vaporisation, Δ(vap)H(298), of seven ionic liquids (ILs) (four imidazoliums, a pyridinium, a phosphonium and an isouronium) have been determined by temperature programmed desorption using line of sight mass spectrometry. They were: 1-ethyl-3-methylimidazolium bis(pentafluoroethyl)phosphinate, [C(2)C(1)Im][PO(2)(C(2)F(5))(2)]; 1-butyl-3-methylimidazolium octylsulfate, [C(4)C(1)Im][C(8)OSO(3)]; 1-butyl-3-methylimidazolium tetrafluoroborate, [C(4)C(1)Im][BF(4)]; 1-hexyl-3-methylimidazolium tris(pentafluoroethyl)trifluorophosphate, [C(6)C(1)Im][FAP]; 1-butylpyridinium methylsulfate, [C(4)Py][C(1)OSO(3)]; trihexyl(tetradecyl)phosphonium tetrafluoroborate, [P(6,6,6,14)][BF(4)] and O-ethyl-N,N,N',N'-tetramethylisouronium trifluoromethanesulfonate, [C(2)(C(1))(4)iU][TfO]. The values were found to be consistent with a previously proposed, predictive, model in which Δ(vap)H(298) is decomposed into a Coulombic component (computable from the IL density) and van der Waals components from the anion and cation. Two previously predicted values of Δ(vap)H(298) were found to be within 6 kJ mol(-1) of the measured experimental values. Values for the van der Waals components are tabulated for eleven cations and twelve anions. Predictions are made for Δ(vap)H(298) for 13 ILs with as yet unmeasured Δ(vap)H(298) values (using experimental molar volumes), and for a further 44 ILs using estimated molar volumes.     

1,2-bis(pyridine-2-carboxamido)benzenate(2-), (bpb)2-: a noninnocent ligand. Syntheses, structures, and mechanisms of formation of [(n-Bu)4N][FeIV2(mu-N)(bpb)2(X)2] (X = CN-, N3-) and the electronic structures of [MIII(bpbox1)(CN)2] (M = Co, Fe)

The well-known tetradentate ligand 1,2-bis(pyridine-2-carboxamido)benzenate(2-), (bpb)2-, and its 4,5-dichloro analogue, (bpc)2-, are shown to be "noninnocent" ligands in the sense that in coordination compounds they can exist in their radical one- and diamagnetic two-electron-oxidized forms (bpbox1)- and (bpbox2)0 (and (bpcox1)- and (bpcox2)0), respectively. Photolysis of high-spin [(n-Bu)4N][FeIII(bpb)(N3)2] and its (bpc)2- analogue in acetone solution at room temperature generates the diamagnetic dinuclear complex [(n-Bu)4N][FeIV2(mu-N)(bpb)2(N3)2] and its (bpc)2- analogue; the corresponding cyano complex [(n-Bu)4N][FeIV2(mu-N)(bpb)2(CN)2] has been prepared via N3- substitution by CN-. Photolysis in frozen acetonitrile solution produces a low-spin ferric species (S = 1/2) which presumably is [FeIII(bpbox2)(N)(N3)]-, as has been established by EPR and M?ssbauer spectroscopy. The mononuclear complexes [(n-Bu)4N][FeIII(bpb)(CN2)] (low spin), [Et4N][CoIII(bpb)(CN)2] and Na[CoIII(bpc)-(CN)2].3CH3OH can be electrochemically or chemically one-electron-oxidized to give [FeIII(bpbox1)(CN)2]0 (S = 0), [CoIII(bpbox1)(CN)2]0 (S = 1/2), and [CoIII(bpcox1)(CN)2]0 (S = 1/2). All complexes have been characterized by UV-vis, EPR, and M?ssbauer spectroscopy, and their electro- and magnetochemistries have been studied. The crystal structures of [(n-Bu)4N][FeIII(bpb)(N3)2].1/2C6H6CH3, Na[FeIII(bpb)(CN)2], Na[CoIII(bpc)(CN)2].3CH3OH, [(n-Bu)4N][FeIV2(mu-N)(bpb)2(CN)2], and [(n-Bu)4N][FeIV2(mu-N)(bpb)(N3)2] have been determined by single-crystal X-ray diffraction.     

Ionothermal syntheses of six three-dimensional zinc metal-organic frameworks with 1-alkyl-3-methylimidazolium bromide ionic liquids as solvents

We have performed ionothermal reactions between Zn(NO3)2 and H3BTC in 1-alkyl-3-methylimidazolium bromide ionic liquids with the alkyl group varying from ethyl to amyl. Six 3-D metal-organic frameworks (MOFs), including two isomeric compounds [Zn3(BTC)2(H2O)2] x 2H2O (1 and 2) (H3BTC = 1,3,5-benzenetricarboxylate acid), [EMI][Zn(BTC)] (3) (E = ethyl, MI = 3-methylimidazolium), [PMI][Zn(BTC)](4) (P = propyl), [BMI]2[Zn4(BTC)3(OH)(H2O)3] (5) (B = butyl), and [AMI][Zn2(BTC)(OH)Br] (6) (A = amyl), have been synthesized and structurally characterized. Compounds 1 and 2 are isomeric compounds, in which the coordination modes of Zn atoms and the BTC3- ligands are considerably different. Compounds 3-6 crystallize with the corresponding ionic liquid cations incorporated in the frameworks. Their crystal structures show various features including various coordination geometries of Zn2+ and various bridging modes of the BTC3- ligands. The incorporated cations appear to have strong interactions with the frameworks.     

1-ethyl-3-methylimidazolium based ionic liquids containing cyano groups: synthesis, characterization, and crystal structure

New 1-ethyl-3-methylimidazolium (EMI) salts [EMI][C(CN)3] and [EMI][Ag(CN)2] were prepared and characterized. The C(CN)3 salt has a melting point at -11 degrees C and shows a low viscosity (18 cP) and a high ionic conductivity (1.8 x 10(-2) S cm(-1)) at room temperature. This conductivity is less than that of [EMI][N(CN)2] salt (2.7 x 10(-2) S cm(-1)), possibly due to the larger molecular weight of the anion. The first EMI salt containing Ag(I) complexes [EMI][Ag(CN)2] has a higher melting point of 73 degrees C. In the crystal, the C-H...pi interionic interactions between cations construct zigzag chains in the cationic two-dimensional layer. Close Ag..Ag interionic contacts of 3.226(1) A were observed in the one-dimensional anionic chain, and the relatively high melting point among the EMI salts with a monoanion appears to be governed essentially by these direct Ag...Ag interactions.     

Ideal gas solubilities and solubility selectivities in a binary mixture of room-temperature ionic liquids

This study focuses on the solubility behaviors of CO2, CH4, and N2 gases in binary mixtures of imidazolium-based room-temperature ionic liquids (RTILs) using 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C2mim][Tf2N]) and 1-ethyl-3-methylimidazolium tetrafluoroborate ([C2mim][BF4]) at 40 degrees C and low pressures (approximately 1 atm). The mixtures tested were 0, 25, 50, 75, 90, 95, and 100 mol % [C2mim][BF4] in [C2mim][Tf2N]. Results show that regular solution theory (RST) can be used to describe the gas solubility and selectivity behaviors in RTIL mixtures using an average mixture solubility parameter or an average measured mixture molar volume. Interestingly, the solubility selectivity, defined as the ratio of gas mole fractions in the RTIL mixture, of CO2 with N2 or CH4 in pure [C2mim][BF4] can be enhanced by adding 5 mol % [C2mim][Tf2N].