共查询到20条相似文献,搜索用时 187 毫秒
1.
2.
合成了一系列苯乙烯.马来酸酐共聚物(SMA)。并对共聚物的结构进行了表征。用土埋法和CO2释放法研究了共聚物的生物降解性。探讨了分子量、组成、环境等因素对生物降解性的影响,发现共聚物的分子量降低。降解率增大;共聚物中马来酸酐含量提高。降解率增大;适宜的环境有利于生物降解。 相似文献
3.
4.
5.
将引发剂偶氮二异丁腈(AIBN)、共聚单体苯乙烯(St)和马来酸酐(MA)溶解于甲苯中,采用沉淀聚合法合成苯乙烯-马来酸酐共聚物(SMA).分别研究了反应温度、引发剂用量、反应时间、单体配比和单体浓度对聚合物得率和酸酐含量的影响.采用正交实验确定最优反应条件为:单体浓度20%,单体物质的量比为1∶1,引发剂用量为0.60%,反应温度为86℃,反应时间2h,产物得率为86.86%,酸酐含量为50.28%.并利用傅里叶变换红外光谱(FTIR)、核磁共振碳谱(~(13)C NMR)、凝胶渗透色谱(GPC)和热分析法分别研究聚合物的分子结构、相对分子质量及相对分子质量分布和热稳定性.结果表明产物是苯乙烯-马来酸酐交替共聚物,相对分子质量分布较窄,具有良好的热稳定性. 相似文献
6.
7.
8.
苯乙烯-马来酸酐共聚物具有优异的乳化、成膜、增稠等特性,是一种重要的功能化聚合物.从酯化、胺化、苯环接枝、带上电荷、引入功能性基团和引入第三单体等方面对于苯乙烯-马来酸酐共聚物化学改性进行了全面的总结,简评了各种化学改性的方法及改性共聚物的优点,报道了化学改性方法近年来出现的新进展. 相似文献
9.
10.
11.
12.
Aromatic ketones were synthesized by solventless Friedel-Crafts acylation of anisole, mesitylene, xylenes, and toluene with acetic acid and benzoic acid in the presence of trifluoroacetic anhydride by use of bismuth or scandium triflate at 30 °C. Toluene, benzene, and even deactivated substrate such as chlorobenzene were benzoylated by the combined use of heptafluorobutyric anhydride and bismuth triflate at 75-100 °C. The catalyst could be easily recovered and reused repeatedly for the reaction. 相似文献
13.
A. Micó-Tormos F. BianchiE.F. Simó-Alfonso G. Ramis-Ramos 《Journal of chromatography. A》2009,1216(15):3023-3030
A method for the determination of fatty alcohol ethoxylates (FAEs) using diphenic anhydride as derivatization reagent and RP-HPLC separation with UV–vis detection is presented and compared to derivatization with maleic, phthalic, and other cyclic anhydrides. With these anhydrides, the reaction rates increased when urea was added to the reaction medium, and the yields did not decrease when the samples contained moderate amounts of water. Gradient elution on a C8 column was performed with water/acetonitrile in the presence of 0.1% acetic acid. The use of diphenic anhydride was advantageous for both the chromatographic separation and the detection. Specifically, sensitivity at 200 and 220 nm was significantly better for the FAE diphenates, resulting in lower limits of detection at both wavelengths for the diphenates than for the maleates and phthalates (up to 30 and 4.3 times lower at 220 nm, respectively). Response factors for the diphenates decreased less than those of the phthalates when the number of ethylene oxide units, m, increased, reaching a constant value of ca. 0.62 when m > 3. Peak symmetries and efficiencies were also better than those found for the other anhydrides. The optimized procedure was applied to the characterization and determination of FAEs in the effluent of a wastewater treatment plant and in sea water. 相似文献
14.
The pseudo-boehmite derived alumina supported metal(Cu,Co and Ni) catalysts prepared by the impregnation method were investigated in hydrogenation of maleic anhydride(MA) to succinic anhydride(SA) and γ-butyrolactone.The catalysts were characterized by ICP-AES,N_2 adsorptiondesorption,XRD,H_2-TPR,CO-TPD,dissociative N_2O adsorption and TEM and the results showed that the alumina possessed mesoporous feature and the metal species were well dispersed on the support.Compared to Cu/Al_2O_3 and Co/Al_2O_3,Ni/Al_2O_3 exhibited higher catalytic activity in the MA hydrogenation with 92%selectivity to SA and nearly 100%conversion of MA at 140 °C under 0.5 MPa of H_2 with a weighted hourly space velocity of 2 h ~1(MA).The stability of Ni/Al_2O_3 catalyst was also investigated. 相似文献
15.
16.
17.
开发高活性的顺酐加氢制丁二酸酐和γ-丁内酯催化剂具有重要的工业意义.顺酐加氢多采用Cu基和Ni基催化剂,但一般Cu基和Ni基催化剂存在反应温度高(170–260℃)和稳定性差等缺点,很有必要开发高活性的顺酐加氢催化剂.我们以拟薄水铝石作为Al2O3载体的前驱体,采用浸渍法制备了一系列镍铝尖晶石型衍生的不同Ni含量的Ni/Al2O3催化剂,并研究了它们在顺酐加氢反应中的催化性能.还原前Ni/Al2O3催化剂的X射线衍射结果表明,催化剂含有NiAl2O4物种.氮吸附结果显示,不同Ni含量的催化剂均具有介孔结构.氢-程序升温还原研究发现,Ni/Al2O3催化剂经750℃还原2 h后,其表面上NiAl2O4物种能被高效还原.X射线粉末衍射结果表明,750℃还原的Ni/Al2O3催化剂中金属Ni颗粒尺寸随着Ni负载量升高而增大.利用一氧化碳-程序升温脱附对750℃还原的Ni/Al2O3催化剂进行研究,发现750℃还原的催化剂上金属Ni物种含量从高到低依次为:Ni(7.5%)/Al2O3>Ni(5%)/Al2O3>Ni(2.5%)/Al2O3.采用CO化学吸附获得的Ni(2.5%)/Al2O3,Ni(5%)/Al2O3和Ni(7.5%)/Al2O3催化剂上金属Ni颗粒尺度分别为8.0,12.8和15.7 nm.活性研究结果表明,750℃还原的Ni(5%)/Al2O3催化剂具有最高的催化活性,这可能是由于Ni(5%)/Al2O3催化剂具有较多的Ni活性位点和较合适的Ni颗粒粒度所致.进一步研究发现,在650–750℃还原温度下,Ni(5%)/Al2O3催化剂的还原度随着还原温度的升高而升高,Ni分散度随着还原温度的升高而降低.活性结果研究表明,700℃还原的Ni(5%)/Al2O3催化剂具有较多的Ni活性位点和较合适的Ni颗粒粒度,具有最高的加氢催化活性,其在120℃,H2压力为0.5 MPa和质量空速为2 h?1的反应条件下,能获得近100%的顺酐转化率和90%的丁二酸酐选择性,同时该催化剂具有优良的稳定性.以上结果表明,尖晶石型衍生的Ni/Al2O3催化剂是一个十分有应用前景的顺酐加氢催化剂. 相似文献
18.
A novel and highly efficient method for activating highly hindered acid anhydrides towards the acylation of alcohols and carbohydrate-derived polyols has been developed. This new method relies on the capacity of the hafnium triflate catalyst Hf(OTf)2 to activate highly hindered acid anhydrides, and to direct the acylation reaction. This new acylation protocol is mild and proceed at room temperature with low catalyst loading. The method is versatile and has been extended to different alcohol substrates with different steric encumbrance as well as carbohydrate-derived polyols to afford the corresponding ester products in good to excellent yields. 相似文献
19.
环戊烷选择性氧化用VPO催化剂的合成新方法 总被引:5,自引:1,他引:4
研究了VPO催化剂时还原溶剂对VPO的结构及催化性能的影响,VPO的合成方法如下:(1)V2O5与H3PO4反应生成磷酸钒;(2)用不同的还原溶剂还原磷酸钒得到VPO催化剂前身;(3)活化VPO催化剂前身,研究的还原溶剂有;异丁醇,异丁醇-苯甲醇,异丁醇-石油醚和正己醇。结果表明,使用异丁醇-石油醚作还原溶剂,只能生成VOHPO4.0.5H2O晶体;使用其它溶剂则会生成VO(H2PO4)2和VOH 相似文献
20.
A simple, efficient, regioselective, and scalable palladium-catalyzed hydroxycarbonylation of heteroaryl halides to corresponding carboxylic acids using acetic–formic anhydride in presence of Pd(OAc)2, dppf, and diisopropylethyl amine in dimethyl formamide at 80–90 °C in excellent yields. 相似文献