Electroactive gold nanoparticles protected by 4-ferrocene thiophenol monolayer

Numerous reports have focused on ferrocene-terminated electroactive self-assembled monolayers (SAMs) on a flat Au surface but only a few on ferrocene SAMs on Au colloid. In this paper, we employ 4-ferrocene thiophenol as a novel capping agent to produce electroactive gold nanoparticles in consideration of the peculiar pi-conjugated structure. Transmission electron microscopy shows the narrow-dispersed gold core with an average core diameter of ca. 2.5 nm. UV/vis spectra examine the pi-conjugated structure of 4-ferrocene thiophenol and surface plasmon absorbance of the indicated gold nanoparticles. X-ray photoelectron spectroscopy reveals electronic properties of the Au core and thiol ligands. Electrochemical measurement shows that the oxidation peak current is proportional to the scan rate, indicating the electrode process is controlled by adsorbed layer reaction. The formal potential of the Fc-MPCs is compared with that of free ferrocene in MeCN solution and the Fc-SAMs. The shifts are attributed to the phenyl moiety in the 4-ferrocene thiophenol and dielectric constant of the solvation environment.     

Electrochemical assembly and potential-dependent plasmon absorption of au nanoclusters covered with a 4-aminothiophenol self-assembled monolayer

Gold nanoclusters covered with 4-aminothiophenol (4-ATP) self-assembled monolayers (SAMs) were electrochemically assembled on an Au or ITO electrode. The assembly mechanism is discussed on the basis of results of electrochemical, FT-IR, and XPS measurements. The intensity of plasmon absorption of the gold nanocluster assembly was shown to be dependent on applied potential as a result of electrochemical doping/undoping of a counteranion in the polyaniline film.     

Coordination-based gold nanoparticle layers

Gold nanoparticle (NP) mono- and multilayers were constructed on gold surfaces using coordination chemistry. Hydrophilic Au NPs (6.4 nm average core diameter), capped with a monolayer of 6-mercaptohexanol, were modified by partial substitution of bishydroxamic acid disulfide ligand molecules into their capping layer. A monolayer of the ligand-modified Au NPs was assembled via coordination with Zr4+ ions onto a semitransparent Au substrate (15 nm Au, evaporated on silanized glass and annealed) precoated with a self-assembled monolayer of the bishydroxamate disulfide ligand. Layer-by-layer construction of NP multilayers was achieved by alternate binding of Zr4+ ions and ligand-modified NPs onto the first NP layer. Characterization by atomic force microscopy (AFM), ellipsometry, wettability, transmission UV-vis spectroscopy, and cross-sectional transmission electron microscopy showed regular growth of NP layers, with a similar NP density in successive layers and gradually increased roughness. The use of coordination chemistry enables convenient step-by-step assembly of different ligand-possessing components to obtain elaborate structures. This is demonstrated by introducing nanometer-scale vertical spacing between a NP layer and the gold surface, using a coordination-based organic multilayer. Electrical characterization of the NP films was carried out using conductive AFM, emphasizing the barrier properties of the organic spacer multilayer. The results exhibit the potential of coordination self-assembly in achieving highly controlled composite nanostructures comprising molecules, NPs, and other ligand-derivatized components.     

Gold nanoparticle self-assembly in two-component lipid Langmuir monolayers

Self-assembly processes are considered to be fundamental factors in supramolecular chemistry. Langmuir monolayers of surfactants or lipids have been shown to constitute effective 2D "templates" for self-assembled nanoparticles and colloids. Here we show that alkyl-coated gold nanoparticles (Au NPs) adopt distinct configurations when incorporated within Langmuir monolayers comprising two lipid components at different mole ratios. Thermodynamic and microscopy analyses reveal that the organization of the Au NP aggregates is governed by both lipid components. In particular, we show that the configurations of the NP assemblies were significantly affected by the extent of molecular interactions between the two lipid components within the monolayer and the monolayer phases formed by each individual lipid. This study demonstrates that multicomponent Langmuir monolayers significantly modulate the self-assembly properties of embedded Au NPs and that parameters such as the monolayer composition, surface pressure, and temperature significantly affect the 2D nanoparticle organization.     

Supramolecular layer-by-layer assembly: alternating adsorptions of guest- and host-functionalized molecules and particles using multivalent supramolecular interactions

The stepwise construction of a novel kind of self-assembled organic/inorganic multilayers based on multivalent supramolecular interactions between guest-functionalized dendrimers and host-modified gold nanoparticles has been developed, yielding supramolecular layer-by-layer assembly. The deposition process was monitored by surface plasmon resonance spectroscopy. Further characterization of the multilayer films was performed by means of UV/vis absorption spectroscopy, which showed a linear increase in absorption with the number of bilayers. The growth of the gold nanoparticle plasmon absorption band corresponded to approximately a dense monolayer of gold nanoparticles per bilayer. Ellipsometry and atomic force microscopy (AFM) scratching experiments were used to measure the development of the film thickness with the number of bilayers, confirming linear growth and a thickness increase of approximately 2 nm/bilayer.     

Electrochemical and STM studies of 1-thio-β-D-glucose self-assembled on a Au(111) electrode surface

In this study, a Au(111) electrode is functionalized with a monolayer of 1-thio-β-D-glucose (β-Tg), producing a hydrophilic surface. A monolayer of β-Tg was formed on a Au(111) surface by either (1) potential-assisted deposition with the thiol in a supporting electrolyte or (2) passive incubation of a gold substrate in a thiol-containing solution. For each method, the properties of the β-Tg monolayer were investigated using cyclic voltammetry (CV), differential capacitance (DC), and chronocoulometry. In addition, electrochemical scanning tunneling microscopy (EC-STM) was used to obtain images of the self-assembled monolayer with molecular resolution. Potential-assisted assembly of β-Tg onto a Au(111) electrode surface was found to be complicated by oxidation of β-Tg molecules. The EC-STM images revealed formation of a passive layer containing honeycomb-like domains characteristic of a formation of S(8) rings, indicating the S-C bond may have been cleaved. In contrast, passive self-assembly of thioglucose from a methanol solution was found to produce a stable, disordered monolayer of β-Tg. Since the passive assembly method was not complicated by the presence of a faradaic process, it is the method of choice for modifying the gold surface with a hydrophilic monolayer.     

Interactions of doxorubicin with self-assembled monolayer-modified electrodes: electrochemical, surface plasmon resonance (SPR), and gravimetric studies

We present the results on the partitioning of doxorubicin (DOX), a potent anticancer drug, through the model membrane system, self-assembled monolayers (SAMs) on gold electrodes. The monolayers were formed from alkanethiols of comparable length with different ω-terminal groups facing the aqueous electrolyte: the hydrophobic -CH(3) groups for the case of dodecanethiol SAMs or hydrophilic -OH groups of mercaptoundecanol SAMs. The electrochemical experiments combined with the surface plasmon resonance (SPR) and gravimetric studies show that doxorubicin is likely adsorbed onto the surface of hydrophilic monolayer, while for the case of the hydrophobic one the drug mostly penetrates the monolayer moiety. The adsorption of the drug hinders further penetration of doxorubicin into the monolayer moiety.     

Cyclodextrin-functionalised gold nanoparticles via streptavidin: a supramolecular approach

Biofunctionalised nanoparticles (NPs) have received increased attention both for their potential use as drug carriers and imaging agents and for their applications in medical diagnostics. Functionalised gold nanoparticles (AuNPs) bring together their unique electronic and optical properties (including strong plasmon absorption bands and enhanced light scattering) with the specific capabilities of the functionalising biological molecule. Cyclodextrins (CDs) have been used to functionalise NPs with different approaches. CDs are able to protect from physical, chemical and enzymatic degradation drugs that are included in their cavity. In this study, we report on a new supramolecular approach for the fabrication of CD-functionalised AuNPs. Particularly, we synthesised streptavidin (SA)-coated NPs modified with biotinylated β- and γ-CD, in order to exploit the interaction with SA.     

QCM and EC-SPR Studies of Cytochrome cSelf-assembled on Au Electrode and Enhancement of SPR Signal by Au Nanoparticles

Quartz crystal microbalance(QCM) and cyclic voltammetry(CV) were used to characterize the monolayer of cytochrome c(Cyt c), which was adsorbed on gold film modified with alkanethiol mixed monolayer. A direct comparison of protein surface coverages calculated from QCM and cyclic voltammetric measurements illustrates that the ratio of the electroactive Cyt c to the total surface-confined Cyt cis 34%, which suggests that the orientation is a main factor affecting the electroactivity of Cyt c. Moreover, surface plasmon resonance(SPR) measurement combined with CV “in situ” was used to investigate the conformational change of Cyt c in the redox process. Besides, Au nanoparticles(Au NPs) were adsorbed on the surface of Cyt c. The result indicates that Au NPs promote electron transfer between Cyt c and the gold electrode, and SPR result suggests Au NPs enhance SPR signal.     

Synthesis and surface structure of thymine-functionalized, self-assembled monolayer-protected gold nanoparticles

Thymine-functionalized SAM-protected gold nanoparticles with diameters of 2.2 +/- 0.3 nm and 7.0 +/- 1.0 nm were prepared via a modified two-phase transfer method. UV-vis spectra showed that particle size and solvent type, as well as surface charge, influenced the gold surface plasmon band absorption, along with the interaction between thymine terminal groups in the solution. Although the bulky thymine end groups interacted strongly on the particle surface, a well-ordered monolayer of thyminethiol derivatives with a long hydrocarbon chain was formed on the particle surface, exhibiting an ordered, all-trans conformation of the methylene backbone, similar to those of corresponding self-assembled monolayers (SAMs) generated from normal alkanethiols. A larger particle size and a longer reaction time facilitated the formation of more ordered thymine-terminated thiol SAMs. Thermal analysis indicated that reorientation of the SAMs during heat treatment occurred by two processes, caused possibly by the separate recrystallization of the hydrocarbon long chains and thymine units. More ordered SAMs with a higher thermal stability were formed on the larger particle surfaces when compared with those on the smaller ones. A greater density of molecular packing was found on the smaller particle surfaces. However, SAMs formed on the larger gold particles resembled 2D SAMs on the smooth, flat gold surfaces. XPS results confirmed the thymine structure as well as the chemical bond between gold and sulfur. One type of adsorbed sulfur species was observed for the smaller particles and two for the larger ones, but a slightly higher binding energy of thiolate was found for the smaller ones.     

Multivalent host-guest interactions between beta-cyclodextrin self-assembled monolayers and poly(isobutene-alt-maleic acid)s modified with hydrophobic guest moieties

Poly(isobutene-alt-maleic acid)s modified with p-tert-butylphenyl or adamantyl groups interact with beta-cyclodextrin self-assembled monolayers (beta-CD SAMs) by inclusion of the hydrophobic substituents in the beta-cyclodextrin cavities. The adsorption was shown to be strong, specific, and irreversible. Even with a monovalent competitor in solution, adsorption to the beta-CD SAMs was observed, and desorption proved impossible. The adsorbed polymer layer was very thin as evidenced by surface plasmon resonance spectroscopy and AFM. Apparently, all or most hydrophobic groups of the polymers were employed efficiently in multivalent binding, as was further supported by the absence of specific binding of beta-CD-modified gold nanoparticles to the polymer surface assemblies. Supramolecular microcontact printing of the polymers onto the beta-CD SAMs led to assembly formation in the targeted areas of the substrates.     

DNA-modified electrodes; part 4: optimization of covalent immobilization of DNA on self-assembled monolayers

The covalent immobilization of DNA onto self-assembled monolayer (SAM) modified gold electrodes (SAM/Au) was studied by X-ray photoelectron spectrometry and electrochemical method so as to optimize its covalent immobilization on SAMs. Three types of SAMs with hydroxyl, amino, and carboxyl terminal groups, respectively, were examined. Results obtained by both X-ray photoelectron spectrometry and cyclic voltammetry show that the largest covalent immobilization amount of dsDNA could be gained on hydroxyl-terminated SAM/Au. The ratio of amount of dsDNA immobilized on hydroxyl-terminated SAMs to that on carboxyl-terminated SAMs and to that on amino-terminated SAMs is (3-3.5): (1-1.5): 1. The dsDNA immobilized covalently on hydroxyl-terminated SAMs accounts for 82.8-87.6% of its total surface amount (including small amount of dsDNA adsorbed). So the hydroxyl-terminated SAM is a good substrate for the covalent immobilization of dsDNA on gold surfaces.     

Compact microcubic structures platform based on self-assembly Prussian blue nanoparticles with highly tuneable conductivity

Control of molecular and supramolecular properties is used to obtain a new advanced hybrid material based on Prussian blue nanoparticles (PB NPs). This hybrid material is obtained through a self-assembled Layer-by-Layer (LbL) approach combining the advantageous features of β-cyclodextrin (β-CD) polysaccharides, PB NPs and poly(allylamine hydrochloride) from electrostatic interaction between the deposited layers. Transmission electronic microscopy images suggested that PB NPs were protected by β-CD polysaccharides that prevent the aggregation phenomena. In addition, as confirmed by scanning electronic microscopy images, it was found that PB NPs are organized in microcubic supramolecular like structures via a mesoscale self-assembly process. Interestingly, the 3-bilayer {PAH/PB-CD} film exhibited a higher density of microcubic structures and a high electrochemical response with PB sites available for redox reactions at a supramolecular level. By utilizing fewer bilayers and consequently less material deposition, the formed {PAH/PB-CD} multilayer films of a tuneable conductivity can be expected to have interesting future applications for host-guest like dependent electrochemical biosensing designs.     

Surface enhanced Raman scattering of p-aminothiophenol self-assembled monolayers in sandwich structure fabricated on glass

A sandwich structure consisting of Ag nanoparticles (NPs), p-aminothiophenol (p-ATP) self-assembled monolayers (SAMs), and Ag NPs was fabricated on glass and characterized by surface enhanced Raman scattering (SERS). The SERS spectrum of a p-ATP SAM in such sandwich structure shows that the electromagnetic enhancement is greater than that on Ag NPs assembled on glass. The obtained enhancement factors (EF) on solely one sandwich structure were as large as 6.0 +/- 0.62 x 10(4) and 1.2 +/- 0.62 x 10(7) for the 7a and 3b(b(2)) vibration modes, respectively. The large enhancement effect of p-ATP SAMs is likely a result of plasmon coupling between the two layers of Ag NP (localized surface plasmon) resonance, creating a large localized electromagnetic field at their interface, where p-ATP resides. Moreover, the fact that large EF values (approximately 1.9 +/- 0.7 x 10(4) and 9.4 +/- 0.7 x 10(6) for the 7a- and b(2)-type vibration modes, respectively) were also obtained on a single sandwich structure of Au NPsp-ATP SAMsAg NPs in the visible demonstrates that the electromagnetic coupling does not exist only between Ag NPs but also between Au and Ag NPs. The lower EF values on Au-to-Ag NPs compared to those on Ag-to-Ag NPs demonstrate that the Au-to-Ag coupling must be less effective than the Ag-to-Ag coupling for the induction of SERS in the visible.     

Attachment of ferrocene nanotubes on beta-cyclodextrin self-assembled monolayers with molecular recognitions

Ferrocene nanotubes were fabricated by binding carboxylic acid-derivatized ferrocenes onto template peptide nanotubes via hydrogen bonding. When these ferrocene-functionalized nanotubes were incubated with beta-cyclodextrin (beta-CD) self-assembled monolayers (SAMs) coated on patterned Au substrates in solution, the ferrocene nanotubes recognized and attached onto the beta-CD SAMs via host-guest molecular recognition. The ferrocene nanotubes were also observed to recognize the certain cavity size of CD. The attachment/detachment of nanotubes on the beta-CD SAMs was controlled electrochemically by tuning the redox states of ferrocene nanotubes. This electric field-responsive building block may be applied to build nanometer-sized switching components in electronics and sensors.     

Multivalent dendrimers at molecular printboards: influence of dendrimer structure on binding strength and stoichiometry and their electrochemically induced desorption

A fundamental understanding of multivalency can have a profound influence on bottom-up nanofabrication. For this purpose, three different types of ferrocenyl (Fc) functionalized dendrimers of generations 1-5 with various spacer groups were adsorbed at self-assembled monolayers (SAMs) of heptathioether-functionalized beta-cyclodextrin (betaCD) on gold. The dendrimers formed kinetically stable supramolecular assemblies at the betaCD host surface having up to eight multivalent supramolecular interactions, but could be efficiently removed from the host surface by electrochemical oxidation of the Fc end groups. Dendrimer desorption and re-adsorption could be repeated a number of times without significant decomposition of the system. The stoichiometries of the dendrimers at the surface were determined using cyclic voltammetry (CV). These were quantitatively confirmed for the lower generations by surface plasmon resonance (SPR) titrations of the dendrimers to the betaCD SAM. Measuring CV and SPR simultaneously gave crucial mechanistic information on the electrochemically induced desorption of the dendrimers from the host surface. The redox-active dendrimers effectively blocked the host surface for binding other molecules, e.g. adamantyl-functionalized dendrimers, but electrochemically induced release of the blocking layer revealed the host surface to which the adamantyl dendrimers could then bind.     

Protein adsorption on oligo(ethylene glycol)-terminated alkanethiolate self-assembled monolayers: The molecular basis for nonfouling behavior

A study of protein resistance of oligo(ethylene glycol) (OEG), HS(CH2)11(OCH2CH2)nOH (n = 2, 4, and 6), self-assembled monolayers (SAMs) on Au(111) surfaces is presented here. Hydroxyl-terminated OEG-SAMs are chosen to avoid the hydrophobic effect observed with methyl-terminated OEG-SAMs, particularly at high packing densities. The structure of the OEG-SAM surfaces is controlled by adjusting the assembly solvent. These SAMs were characterized by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). Protein adsorption on these surfaces was investigated by surface plasmon resonance (SPR). OEG-SAMs assembled from mixed ethanol and water solutions show higher packing density on gold than those from pure ethanol solution. For EG2OH- and EG4OH-SAMs, proteins (i.e., fibrinogen and lysozyme) adsorb more on the densely packed SAMs prepared from mixed ethanol and water solutions, while EG6OH-SAMs generally resist protein adsorption regardless of the assembly solvent used.     

Interfacial supramolecular self-assembled monolayers of C(60) by thiolated beta-cyclodextrin on gold surfaces via monoanionic C(60)

The supramolecular self-assembled monolayers (SAMs) of C(60) by thiolated beta-cyclodextrin (CD) on gold surfaces were constructed for the first time using C(60) monoanion. The results indicate that monoanionic C(60) plays a crucial role in the formation of the C(60)-containing self-assembled monolayers. The generation of C(60) monoanion and the formation process of C(60) SAMs were monitored in-situ by UV-visible and near-IR spectroscopy. The resulting C(60) SAMs were fully characterized by spectroscopic ellipsometry (SE), cyclic voltammetry, X-ray photoelectron spectroscopy (XPS), and water contact angle measurements. After the immobilization of C(60) by the SAMs of thiolated beta-CD, the film thickness increased by approximately 1 nm from 0.8 to 1.8 nm as determined by SE, demonstrating the formation of the supramolecular self-assembled monolayers of thiolated beta-CD/C(60). The new C(60) SAMs exhibited one quasi-reversible redox couple at half wave potential of -0.57 V vs SCE in aqueous solution containing 0.1 M KCl. The surface coverage of C(60) on the gold surfaces was estimated to be 1.1 x 10(-10) mol cm(-2). The XPS showed the assembly of C(60) over the thiolated beta-CD SAMs. The surface hydrophobicity increased greatly upon the formation of the C(60)-containing SAMs as analyzed by water contact angle measurements. The results are in agreement with the formation of 1:1 complex of C(60) and cyclodextrin on gold surfaces, though it also reveals some non-homogeneous features of the monolayers.     

建立在硫醇分子电化学替换组装基础上的纳米粒子区域化组装

利用金基底电位变化时硫醇自组装膜的吸脱附性质, 通过改变基底电位和组装溶液, 用电化学方法在金基底上实现了传统自组装技术难以实现的硫醇分子的替换组装; 通过金基底的分区化设计, 用控制电位的组装技术在基底的不同微区内制备了不同末端官能团的硫醇及其衍生物自组装膜; 并在此基础上实现了纳米粒子的区域化组装.     

Electrochemical release of amine molecules from carbamate-based, electroactive self-assembled monolayers

In this paper, carbamate-based self-assembled monolayers (SAMs) of alkanethiolates on gold were suggested as a versatile platform for release of amine-bearing molecules in response to the electrical signal. The designed SAMs underwent the electrochemical oxidation on the gold surface with simultaneous release of the amine molecules. The synthesis of the thiol compounds was achieved by coupling isocyanate-containing compounds with hydroquinone. The electroactive thiol was mixed with 11-mercaptoundecanol [HS(CH(2))(11)OH] to form a mixed monolayer, and cyclic votammetry was used for the characterization of the release behaviors. The mixed SAMs showed a first oxidation peak at +540 mV (versus Ag/AgCl reference electrode), indicating the irreversible conversion from carbamate to hydroquinone groups with simultaneous release of the amine molecules. The analysis of ToF-SIMS further indicated that the electrochemical reaction on the gold surface successfully released amine molecules.