D-π-A型共轭聚合物的合成及其光伏性能

设计合成了3种主链相同、侧基不同的Donor(D)-π-Acceptor(A)型共轭聚合物:聚[(4,8-二辛氧基苯[1,2-b;3,4-b]二噻吩)-(9-(4-氰基苯基)-9H-咔唑)](PBDTCz-CN)、聚[(4,8-二辛氧基苯[1,2-b;3,4-b′]二噻吩)-(9-(4-醛基苯基)-9H-咔唑)](PBDTCz-CHO)和聚[(4,8-二辛氧基苯[1,2-b;3,4-b]二噻吩)-(9-(4-硝基苯基)-9H-咔唑)](PBDTCz-NO_2)。通过调变侧基上的受体基团,比较了氰基、醛基、硝基对聚合物光学和电学性能的影响,讨论了影响聚合物光电转换效率的主要因素。3种聚合物的光学带隙和线性吸收系数依次分别为2.32 eV,152.0 L/(g·cm);2.43 eV,58.5 L/(g·cm)和2.25 eV,85.5 L/(g·cm)。在这些聚合物中,彼此间的最高占据分子轨道(HOMO)能级差距很小,PBDTCz-NO_2的最低未占据分子轨道(LUMO)能级最低(-3.38eV)。在100 W/m~2模拟太阳光的照射下,基于这些聚合物的光伏器件(器件结构:ITO/PEDOT:PSS/Polymer:[70]PCBM(1:2)/Ca/A1)的光电转换效率分别为0.44%(PBDTCz-CN)、0.001 8%(PBDTCz-CHO)和0.23%(PBDTCz-NO_2)。低的光电转换效率主要归因于低的短路电流,而影响短路电流的主要原因有自身吸光性能的限制和弱的π-π堆砌作用。     

含苯并硒二唑聚咔唑/芴类共轭聚电解质及其前驱体的合成与性能研究

采用Suzuki偶合反应合成了一系列新型的咔唑、芴和2,1,3-苯并硒二唑的共聚物——聚[3,6-(N-(2-乙基己基))咔唑-2,1,3-苯并硒二唑-9,9-双(N,N-二甲基胺丙基)芴](PCzN-BSeD)及其相应的聚电解质衍生物——聚[3,6-(N-(2-乙基己基))咔唑-2,1,3-苯并硒二唑-9,9-(双(3′-(N,N-二甲基)-N-乙基铵)丙基)芴]二溴(PCzNBr-BSeD).在聚咔唑和芴中引入不同比例的2,1,3-苯并硒二唑(BSeD)单元,引起了由咔唑和芴链段向窄带隙苯并硒二唑(BSeD)单元有效的能量转移.通过对聚合物电致发光性能的研究,发现用聚(3,4-亚乙基二氧基噻吩)(PEDOT)或聚(3,4-亚乙基二氧基噻吩)/聚乙烯咔唑(PEDOT/PVK)作为空穴传输层时,器件的性能相差不大,表明咔唑的引入较明显的改善了聚合物的空穴注入性能.而且几乎所有的聚合物用高功函数铝作阴极的器件和用钡/铝作阴极的器件具有相近的发光性能,表明这类聚合物具有良好的电子注入性能.     

喷墨打印构建碳纳米管薄膜晶体管及其电性能的研究

本文利用聚[(9,9-二辛基芴-2,7-二基)-共-(1,4-苯并2,1-3-噻二唑)](PFO-BT)、聚[N,N′-二(2-辛基十二烷基)-异靛蓝-共-(9,9-二辛基芴基-2,7-二基)](PFIID)、聚[氮-(9-十七烷基)咔唑](PCZ)、聚[N,N′-二(2-辛基十二烷基)-异靛蓝-共-N-[1-(辛基壬基)-咔唑基-2,7-二基](PCZIID),尝试从本实验室用电弧放电法制备的单壁碳纳米管中分离纯化出高纯的半导体碳纳米管,并通过喷墨打印方式在氧化铪基体表面构建碳纳米管薄膜晶体管器件。研究表明这4种聚合物都能从自制单壁碳纳米管中选择性分离半导体碳纳米管,其中分子量和共轭单元更大的PCZ和PCZIID表现出更高的分离效率。通过对基底进行氧等离子体处理和优化打印工艺,得到了性能较好的印刷碳纳米管薄膜晶体管器件,器件的开关比为1.2×10~5~8×10~5,迁移率可达到5.3~6.8cm~2·V~(-1)·s~(-1)。表明自制的单壁碳纳米管可用于构建性能优越的印刷薄膜晶体管器件,还有望应用于高密度集成电路和新型显示所需的驱动电路等。     

两种新型咔唑衍生物的合成及其光电性能

以咔唑、三苯基氯硅烷及2-溴芴为原料,经甲基化、硼酸化、Ullmann偶联、Suzuki偶联等反应合成了两种新型咔唑衍生物--3,6-二(9,9-二甲基-9H-2-芴基)-9-苯基-9H-咔唑(1a)和3,6-二[(4-三苯硅基)苯基]-9-苯基-9H-咔唑(1b),其结构经1H NMR和元素分析表征.用UV-Vis,荧光光谱和循环伏安曲线研究了1a和1b的光电性能.     

侧链含金属铱配合物的电磷光白光聚合物

设计了一系列新型芴-咔唑电磷光共轭聚合物.通过共价键将双(2-(9,9-二乙基-9H-芴-2-基)吡啶-N,C2’)合铱(III)(Ir Fpy)接枝到3,6-二溴咔唑的N-烷基侧链,采用Suzuki缩聚反应合成了铱配合物(Ir Fpy)含量分别为0.25 mol%,0.5 mol%和1 mol%的聚合物PF-Ir Fpy.当引入的配合物Ir Fpy含量为1 mol%时,得到的共轭聚合物发射色坐标为(0.44,0.56)的黄光.随着接枝的铱配合物Ir Fpy在共轭聚合物中含量降低,作为主体的聚(9,9-二辛基芴)蓝光发射不能被完全淬灭,得到共聚物同时发射主体蓝光及客体铱配合物黄光的单分子白光共轭聚合物.共聚物发光器件结构为ITO/PEDOT:PSS(50 nm)/polymer+PBD(30 wt%)(80nm)/Ba(4 nm)/Al(150 nm)[氧化铟锡/苯磺酸掺杂聚乙烯基二氧噻吩/聚合物+(2,4-二苯-5-4-叔丁基苯-1,3,4-噁二唑)(w=30%)/钡/铝],基于共聚物PF-Ir Fpy025的器件流明效率为3.97 cd/A,色坐标为(0.34,0.34),非常接近于标准白光发射的色坐标(0.33,0.33).为了研究采用共聚物PF-Ir Fpy025和PF-Ir Fpy05制备的白光器件的光谱稳定性,测试了外加电压在8~13 V范围内的EL光谱,当外加电压从8 V升高到13 V时,两个EL器件都表现出了良好的EL光谱稳定性.研究结果表明,在共轭聚合物侧链上引入螯合金属铱配合物单元是实现高效、稳定的白光电致磷光器件的有效方法之一.     

基于咔唑衍生物的热激活延迟荧光材料合成与性质研究

以咔唑和吩噻嗪为原料,合成了2种具有D-π-A结构的新型咔唑衍生物(4-(9H-咔唑-9-基)苯基)(9-苯基-9H-咔唑-3-基)甲酮(3a)和(4-(10H-吩噻嗪-10-基)苯基)(9-苯基-9H-咔唑-3-基)甲酮(3b).化合物3a和3b的结构分别经1 H NMR和IR进行了表征,同时通过紫外-可见吸收光谱和光致发光光谱研究了其光物理性质,并进一步采用含时密度泛函理论(TDDFT)对化合物3a和3b的最低能量电子跃迁和最低三线态进行了计算.结果表明:它们都具有分子内电荷转移ICT特征,而且理论计算的吸收光谱与实验测得的光谱数据基本符合.     

基于醛或酮基咔唑超交联多孔聚合物的合成、表征与气体吸附性能

设计合成了醛基或酮基功能化的咔唑9-(4-联苯)-3-甲醛基咔唑(CM-2)、9-(4-联苯)-4-乙酮基咔唑(CM-3)和9-(4-联苯)-2,6-二氟-3-乙酮基咔唑(CM-4).分别以CM-2,CM-3和CM-4为单体,以FeCl_3为催化剂,采用一步法制备了超交联多孔聚咔唑:聚[9-(4-联苯)-3-甲醛基咔唑](HPP-2)、聚[9-(4-联苯)-4-乙酮基咔唑](HPP-3)和聚[9-(4-联苯)-2,6-二氟-3-乙酮基咔唑](HPP-4).反应中间体和聚咔唑的结构由核磁共振波谱(~1H NMR,~(13)C NMR)、魔角旋转交叉固体核磁共振波谱(~(13)C CP/MAS NMR)、红外光谱(IR)和质谱(MS)进行表征,研究了聚咔唑的热稳定性及气体(氮气、二氧化碳和甲烷)吸附性能.结果表明,3种聚咔唑在400℃左右开始分解,450~550℃出现明显失重,然后逐渐趋于平缓,800℃时的热失重均小于25%,表明材料有很好的热稳定性;HPP-2,HPP-3和HPP-4的BET比表面积分别为330,420和660 m~2/g,孔径分别为0.98,0.96和1.07 nm,对二氧化碳的吸附质量分数分别为6.90%,8.30%和9.80%,对甲烷的吸附质量分数分别为1.10%,1.30%和1.60%,表明所得聚合物的孔主要为微孔,且对二氧化碳和甲烷气体有良好的吸附能力.     

2-[(9-苯基)-9H-3-咔唑基]-5-[(9-对甲苯基)-9H-3-咔唑基]吡啶的合成及其光谱性能

以咔唑和2,5-二溴吡啶为初始原料,经Ullmann反应、NBS亲电取代反应和Suzuki偶联等反应,合成了一种新型的磷光配体2-[(9-苯基)-9H-3-咔唑基]-5-[(9-对甲苯基)-9H-3-咔唑基]吡啶(5),其结构经1HNMR,ESI-MS及元素分析表征。研究了5在二氯甲烷中的荧光光谱和紫外吸收光谱。     

一种基于咪唑-咔唑蓝色荧光材料的合成及性能研究

联苯甲酰、对溴苯甲醛和乙酸铵缩合得到2-(4-溴苯基)-4,5-二苯基咪唑,再与4-(9H-咔唑-9-基)苯硼酸通过Suzuki偶联反应合成一种蓝色荧光材料4,5-二苯基-2-[4-(4-(9H-咔唑-9-基)苯基)苯基]-1H-咪唑,其结构经IR、~1H NMR、~(13)C NMR和MS表征。利用紫外-可见吸收光谱、荧光光谱、循环伏安法、TGA、DSC和理论计算研究了化合物的光学、电化学和热稳定性能。结果表明:化合物的最大吸收波长为341 nm,荧光发射波长为416 nm,HOMO和LUMO轨道能级分别为5.29 eV和2.11 eV。TGA和DSC测试结果表明该化合物具有良好的热稳定性能。     

新型基于二氟苯并噻二唑和双噻吩丙烯腈共轭聚合物的设计、合成及光伏性能

设计并合成了两种基于5,6-二氟苯并噻二唑和双噻吩丙烯腈单元的D-A型共轭聚合物,聚[(5,6-二氟-苯[c][1,2,5]噻二唑-4,7-基)-交替-((E)-2,3-双(3'-(2-辛基十二烷基)-(2,2'-双噻吩)-5,5'-基)丙烯腈)](DFBT812)和聚[(5,6-二氟-苯[c][1,2,5]噻二唑-4,7-基)-交替-((E)-2,3-双(3'-(2-癸基十四烷基)-(2,2'-双噻吩)-5,5'-基)丙烯腈)](DFBT1014)作为聚合物太阳电池的给体材料。通过侧链工程,引入了2-辛基十二烷基和2-癸基十四烷基侧链实现对聚合物的溶解性,结晶性以及共混膜形貌的调节。研究结果表明,共轭聚合物DFBT812与PC_(61)BM的共混膜表现出更好的相分离尺度,能够促进载流子的传输和抽取。基于共轭聚合物DFBT812的太阳电池器件取得了0.87 V的开路电压和6.25%的能量转换效率。除此之外,基于DFBT812的聚合物太阳电池器件在活性层厚度为220 nm时仍然表现出6%的能量转换效率。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.