Heat transfer and rheological properties of transformer oil-oxidized MWCNT nanofluid

Power transformers play a key role in power and electrical industries and thus boosting their efficiency is necessary. In this study, the effect of oxidized multi-walled carbon nanotubes on transformer oil thermophysical properties was experimentally investigated. The maximum amount of carbon nanotubes was chosen up to 0.01 mass% to assure the maximum purity of transformer oil. Heat transfer characteristics of transformer oil and nanofluids in two cases of free and forced convection were studied. Breakdown voltage, flash point, pour point, density, electrical and thermal conductivities, viscosity and shear stress, as eight important quality parameters, were determined. According to the experimental results, the Breakdown voltage decreased through concentration increasing. Electrical conductivity is not changed considerable with increasing concentration and temperature. Thermal conductivity of nanofluids and transformer oil changed with increasing temperature and concentration. Furthermore, at all concentrations and temperatures, the viscosity of the nanofluids was lower than that of transformer oil.     

Rheological Behavior of Spinning Dope of Multiwalled Carbon Nanotube/Polyacrylonitrile Composites

The spinning dope of Multiwalled carbon nanotube/polyacrylonitrile composites was prepared by in-situ polymerization in 50wt% NaSCN solution. The rheological behavior of the dope containing carbon nanotubes from 0.19wt% to 1.9wt% was investigated using rotational rheometry at 60°C.The nanotubes have diameters between 30-50nm and lengths ranging from 6 to 10 μm. The apparent viscosity decreases with the addition of carbon nanotubes; this can be explained by the inhibition of carbon nanotubes during polymerization progress. The spinning dope containing various contents of carbon nanotubes exhibits a shear thickening effect. However, the dynamic rheological test shows there is a peak of complex viscosity with the increasing in frequency.     

The Specific Heat Capacity,Effective Thermal Conductivity,Density, and Viscosity of Coolants Containing Carboxylic Acid Functionalized Multi-Walled Carbon Nanotubes

Obviously, the behavior of thermophysical properties of covalently functionalized CNT-based water and -based ethylene glycol (EG) nanofluids cannot be predicted from the predicted models. We present a study of the specific heat capacity, effective thermal conductivity, density, and viscosity of coolants containing functionalized multi-walled carbon nanotubes (CNT-COOH) with carboxylic acid groups at different temperatures. After synthesizing of CNT-COOH-based water and CNT-COOH-based EG nanofluids, measurements on the prepared coolant were made at various concentrations by different experimental methods. While the thermal conductivity of both nanofluids illustrated a significant increase, the specific heat capacity of both samples showed a downward behavior with increasing temperature. Although the thermal conductivity of CNT-COOH-based water nanofluids is bigger than CNT-COOH-based EG nanofluids, CNT-COOH-based water has weaker temperature dependence than that of the CNT-COOH-based EG nanofluids. The viscosity was investigated in different shear rates and temperatures. It is noteworthy that CNT-COOH-based EG nanofluids show relatively a non-Newtonian behavior. Interestingly, specific heat capacities of both prepared nanofluids were decreased with increasing concentration. Also, the density of the CNT-COOH-based water and -based EG nanofluids increased and decreased smoothly with increasing CNT-COOH concentration and temperature, respectively.     

The effects of the lengths and orientations of single-walled carbon nanotubes on the electrochemistry of nanotube-modified electrodes

The influence of both nanotube orientation and length on the electrochemical properties of electrodes modified with single-walled carbon nanotubes was investigated. Gold electrodes were modified with either randomly dispersed or vertically aligned nanotubes to which ferrocenemethylamine was attached. Electron transfer kinetics were found to depend strongly on the orientation of the nanotube, with electron transfer between the gold electrode and the ferrocene moiety being 40 times slower through randomly dispersed nanotubes than through vertically aligned nanotubes. The difference is hypothesized to be due to electron transfer being more direct through a single tube than that with electrodes modified with randomly dispersed nanotubes. With the vertically aligned nanotubes the rate constant for electron transfer varied inversely with the mean length of the nanotubes. The results indicate there is an advantage in using aligned carbon nanotube arrays over randomly dispersed nanotubes for achieving efficient electron transfer to bound redox active species such as in the case of bioelectronic or photovoltaic devices.     

Rheological Behaviors of Nanofluids Containing Multi-Walled Carbon Nanotube

Stable nanofluids containing multi-walled carbon nanotubes (MWNTs) treated by concentrated acid and mechanical mill technology have been prepared. Water, ethylene glycol, glycerol, and silicone oil were used as base fluids. The rheological behaviors of the obtained nanofluids with different MWNT volume fractions and at different temperatures were investigated in details. The glycerol based and silicone oil based fluids behave Newtonian manner in all studied MWNT volume fractions and temperatures. The dispersant hexamethyldisiloxane added in silicone oil decreases the silicone oil viscosity but has no effect on the rheological properties of nanofluids. For the water based nanofluids, MWNTs act as lubricative function when the MWNT volume fraction is lower. Furthermore, for the ethylene glycol based and glycerol based fluid, almost no viscosity augmentation appears when the temperature is higher than 55°C.     

Rheo-optical studies of carbon nanotube suspensions

We use a polarization-modulation technique to investigate the optical anisotropy of multi- and single-wall carbon nanotubes suspended in a variety of solvents under simple shear flow. Measurements of birefringence and dichroism are performed as a function of shear rate, tube concentration, and solvent viscosity. At fixed volume fraction, the anisotropy increases with increasing shear stress due to enhanced flow alignment. At fixed shear stress, the anisotropy increases with volume fraction due to rotational excluded-volume interactions. By considering the rotational diffusivity as a function of nanotube length, diameter, concentration, and solvent viscosity, we demonstrate a leading-order scaling relation for the optical anisotropy in terms of rotary Peclet number Pe. At low Pe, our results are in qualitative agreement with the theoretical predictions of Doi and Edwards. At high Pe, our data suggest that the degree of nanotube alignment scales as Pe16.     

Orientation of a benzene molecule inside a carbon nanotube

Benzene molecules confined in carbon nanotubes of varying radii are employed as semiconductors in electronic nanodevices, and their orientation determines the electrical properties of the system. In this paper, we investigate the interaction energy of all the possible configurations of a benzene molecule inside various carbon nanotubes and then we determine the equilibrium configuration. We adopt the continuous approach together with the semi-empirical Lennard-Jones potential function to model van der Waals interaction between a benzene molecule and a carbon nanotube. This approach results in an analytical expression, which accurately approximates the interaction energy and can be readily used to generate numerical data. We find that horizontal, tilted and perpendicular configurations on the axis of the carbon nanotube are all possible equilibrium configurations of the benzene molecule when the radius of the carbon nanotube is less than 5.580 Å. However, when the radius of the carbon nanotube is larger than 5.580 Å an offset horizontal orientation is the only possible equilibrium configuration of the benzene molecule. In the limiting case, the orientation of a benzene molecule on a graphene sheet can be derived simply by letting the radius of the carbon nanotube tend to infinity.     

Growth Mechanism of Vertically Aligned Carbon Nanotube Arrays

Vertically aligned multi-walled carbon nanotube arrays grown on quartz substrate are obtained by co-pyrolysis of xylene and ferrocene at 850 oC in a tube furnace. Raman spectroscopy and high resolution transmission electron microscopy measurements show that the single-walled carbon nanotubes are only present on top of vertically aligned multi-walled carbon nanotube arrays. It has been revealed that isolated single-walled carbon nanotubes are only present in those floating catalyst generated materials. It thus suggests that the single-walled carbon nanotubes here are also generated by floating catalyst. Vertically alignedcarbon nanotube arrays on the quartz substrate have shown good orientation and good graphitization. Meanwhile, to investigate the growth mechanism, two bi-layers carbon nan-otube films with di erent thickness have been synthesized and analyzed by Raman spectroscopy. The results show that the two-layer vertically aligned carbon nanotube films grow “bottom-up”. There are distinguished Raman scattering signals for the second layer itself, surface of the first layer, interface between the first and second layer, side wall and bottom surface. It indicates that the obtained carbon nanotubes follow the base-growth mechanism, and the single-walled carbon nanotubes grow from their base at the growth beginning when iron catalyst particles have small size. Those carbon nanotubes with few walls (typically <5 walls) have similar properties, which also agree with the base-growth mechanism.     

The role of activation energy and reduced viscosity on the enhancement of water flow through carbon nanotubes

Molecular dynamics simulations are carried out to study the pressure driven fluid flow of water through single walled carbon nanotubes. A method for the calculation of viscosity of the confined fluid based on the Eyring theory of reaction rates is proposed. The method involves the calculation of the activation energy directly from the molecular dynamics trajectory information. Computations are performed using this method to study the effect of surface curvature on the confined fluid viscosity. The results indicate that the viscosity varies nonlinearly with the carbon nanotube diameter. It is concluded that the reason behind the observed enhancement in the rate of fluid flow through carbon nanotubes could be the nonlinear variation of viscosity.     

Green synthesis,crystal growth,and some physicochemical studies on an inter-molecular compound of anthranilic acid and <Emphasis Type="Italic">m</Emphasis>-nitro-benzoic acid system

Nanofluids are prepared by suspending the nanoparticles in the base fluid and can be substantially enhanced the heat transfer rate compared to the pure fluids. In this paper, experimental investigation of the effects of volume concentration and temperature on dynamic viscosity of the hybrid nanofluid of multi-walled carbon nanotubes and aluminum oxide in a mixture of water (80%) and ethylene-glycol (20%) has been presented. The nanofluid was prepared with solid volume fractions between 0.0625 and 1%, and experiments were performed in the temperature range of 25–50 °C. The measurement results at different shear rates showed that the base fluid and nanofluid samples with solid volume fractions of less than 0.5% had Newtonian behavior, while those with higher solid volume fractions (0.75 and 1%) exhibit a pseudoplastic rheological behavior with a power law index of less than unity. The results showed that viscosity has a direct relationship with solid volume fraction of the nanofluid. The value of maximum enhancement is which occurred in 25 °C. Moreover, the consistency index and power law index have been obtained by accurate curve fitting for samples with non-Newtonian behavior of nanofluids. The results also revealed that the apparent viscosity generally increases with an increase in the solid volume fraction.     

氧化铝模板上定向纳米碳管的快速生长及超声切短

在阳极氧化铝（AAO）模板上电沉积催化剂,快速生长了定向纳米碳管,纳米碳管以顶部生长模式生长.采用了超声的方法来切短露头于AAO模板的纳米碳管,增加纳米碳管膜的定向性.结果显示随着超声时间的增加,纳米碳管的定向性增加.位于纳米碳管膜顶部的催化剂在碳管切短的同时被去除,得到了顶部开口的纳米碳管.解释了纳米碳管被超声切短的机理.     

脉冲激光溅射下固液界面生长的碳纳米管及其机理初探

以脉冲激光束直接溅射浸在水中的单质碳样品，发现在固液界面也能产生的碳纳米管，实验还发现碳纳米管的形成与样品的结构有密切的关联：石墨的层状结构越完整，碳纳米管的形成越容易，而且石墨层面相对于激光束的取向也会显著地影响碳的生成。     

脉冲激光溅射下固液界面生长的碳纳米管及其机理初探

以脉冲激光束直接溅射浸在水中的单质碳样品，发现在固液界而也能产生碳纳米管．实验还发现碳纳米管的形成与样品的结构有密切的关联：石墨的层状结构越完整，碳纳米管的形成越容易，而且石墨层而相对于激光束的取向也会显著地影响碳纳米管的生成．通过对实验结果的分析，探讨了激光液相溅射产生碳纳米管的机理，认为激光溅射产生的碳蒸气被水束缚在固液的界而内，而完整的晶而使碳蒸气在界而内的分布具有准二维的性质，为碳纳米管的生长提供了较为理想的环境．     

椅型碳纳米管吸附氧原子的密度泛函理论研究

利用密度泛函B3LYP对有限长扶手椅形单壁碳纳米管(3,3),(4,4)和(5,5)吸附O原子的几何结构、电子属性、反应能和红外光谱进行了系统地理论研究,获得了一些有意义的结果,主要包括如下4个方面:(1)2个O原子吸附在管外壁垂直于管轴的C—C键形成开环的轮烯结构,吸附在管内壁形成环氧结构;(2)O原子吸附在管外壁要比吸附在管内壁具有较大的能隙和吸附反应能;(3)与单壁碳纳米管管外壁吸附1个O原子相比,2个O原子吸附在管外壁具有较大的吸附反应能;(4)B3LYP得到的C—O伸缩振动频率与实验一致.     

Template-free directional growth of single-walled carbon nanotubes on a- and r-plane sapphire

We report high-throughput growth of highly aligned single-walled carbon nanotube arrays on a-plane and r-plane sapphire substrates. This is achieved using chemical vapor deposition with ferritin as the catalyst. The nanotubes are aligned normal to the [0001] direction for growth on the a-plane sapphire. They are typically tens of micrometers long, with a narrow diameter distribution of 1.34 +/- 0.30 nm. In contrast, no orientation was achieved for growth on the c-plane and m-plane sapphire, or when Fe films, instead of ferritin, were used as the catalyst. Such orientation control is likely related to the interaction between carbon nanotubes and the sapphire substrate, which is supported by the observation that when a second layer of nanotubes was grown, they followed the gas flow direction. These aligned nanotube arrays may enable the construction of integrable and scalable nanotube devices and systems.     

Dispersion and phase separation of carbon nanotubes in ultrathin polymer films

The inner structure and nanoscale distribution of the stiffness was studied for polymer-single-wall carbon nanotube composites. Dispersion of nanotubes in a polystyrene and polyurethane polymer matrix was achieved by a proper choice of the organic solvent (NMP) and sonification of polymer/SWNT solutions. Ultrathin nanocomposite films were prepared through a dip-coating procedure and possessed a noticeable degree of nanotube orientation in the direction of the applied shear force. Peculiarities of the phase separation in the films were studied by atomic force microscopy (with application of force modulation mode to map the nanotube distribution within the polymer matrix) and Raman spectroscopy.     

The binding of single-stranded DNA and PNA to single-walled carbon nanotubes probed by flow linear dichroism

The binding of single-stranded DNAs and a neutral DNA analogue (peptide nucleic acid, PNA) to single-walled carbon nanotubes in solution phase has been probed by absorbance spectroscopy and linear dichroism. The nanotubes are solubilised by aqueous sodium dodecyl sulfate, in which the nucleic acids also dissolve. The linear dichroism (LD) of the nanotubes, when subtracted from that due to the nanotubes/nucleic acid samples, gives the LD of the bound nucleic acid. The binding of the single-stranded DNA to the single-walled nanotubes is quite different from that previously observed for double-stranded DNA. It is likely that the nucleic acid bases lie flat on the nanotube surface with the backbone wrapping round the nanotube at an oblique angle in the region of 45 degrees . The net effect is like beads on a string. The base orientation with the single-stranded PNA is inverted with respect to that of the single-stranded DNA, as shown by their oppositely signed LD signals.     

Nonequilibrium molecular dynamics simulation to describe the rotation of rigid, low aspect ratio carbon nanotubes in simple shear flow

In this paper, the rotation of short carbon nanotubes in simple shear liquid argon flow was investigated by nonequilibrium molecular dynamics (MD) simulation. In their simulations, nanotubes were described as rigid cylinders of carbon atoms. Lennard-Jones potential was employed to represent both argon-argon and argon-carbon interactions. Results show that time period of a nanotube as calculated from MD simulations is longer than what would be calculated from Jeffery's equation based on the aspect ratio of the cylinder. The difference is much higher at low shear rates and for small aspect ratios. Results also reveal that adding caps to an open-ended nanotube speeds up its rotation.     

The effect of molecular weight on the separation of semiconducting single‐walled carbon nanotubes using poly(2,7‐carbazole)s

The use of selective interactions between conjugated polymers and single‐walled carbon nanotubes has emerged as a promising method for the separation of nanotubes by electronic type. Although much attention has been devoted to investigating polyfluorenes and their ability to disperse semiconducting carbon nanotubes under specific conditions, other polymer families, such as poly(2,7‐carbazole)s, have been relatively overlooked. Poly(2,7‐carbazole)s have been shown to also preferentially interact with semiconducting carbon nanotubes, however a detailed investigation of polymer parameters, such as molecular weight, has not been performed. We have prepared seven different molecular weights of a poly(2,7‐carbazole), from short chain oligomers to high molecular weight polymers, and have investigated their effectiveness at dispersing semiconducting single‐walled carbon nanotubes. Although all polymer chain lengths were able to efficiently exfoliate carbon nanotube bundles using a mild dispersion protocol, only polymers above a certain threshold molecular weight (M_n ～ 27 kDa) were found to exhibit complete selectivity for semiconducting nanotubes, with no observable signals from metallic species. Additionally, we found the quality of separation to be strongly dependent on the ratio of polymer to carbon nanotube. Contrary to previous reports, we have found that an excess of poly(2,7‐carbazole) leads to incomplete removal of metallic carbon nanotubes. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2510–2516     

聚丙烯/多壁碳纳米管复合材料的热性能和流变性能

用熔融共混法制备了聚丙烯多壁碳纳米管(PP MWNTs)复合材料,TGA研究表明在氮气气氛下碳纳米管显著增加了聚丙烯基体的热稳定性.3wt%MWNTs可使PP热分解起始温度提高44℃.非等温结晶研究表明MWNTs对PP基体的结晶行为没有明显的影响.流变测试结果表明PP MWNTs复合材料的储能模量G′和损耗模量G″随着MWNTs含量增加逐渐增大.1wt%MWNTs的PP聚合物的零剪切粘度最低,5wt%MWNTs的PP聚合物的零剪切粘度最高,PP和3wt%MWNTs的PP纳米聚合物的零剪切粘度居于二者之间,随着频率的增加,剪切稀化作用越来越明显,呈现出假塑性流体行为.含5wt%MWNTs的PP复合材料的体积和表面电阻率与纯PP相比分别下降了9个和4个数量级,表明少量的MWNTs可以显著改变PP的电学性能.