多嵌段共聚物(P4VP-b-PS-b-P4VP)_n的胶束化行为研究

研究了一系列具有不同链段长度和组成的聚4-乙烯基吡啶-聚苯乙烯-聚4-乙烯基吡啶多嵌段共聚物(P4VP-b-PS-b-P4VP)n在其选择性溶剂甲苯和pH<3的水中的胶束化过程,主要研究了多嵌段共聚物链段长度、溶液浓度和溶剂对其胶束形态的影响.透射电镜和原子力显微镜结果表明随着P4VP段链的相对增长,多嵌段共聚物在甲苯中的胶束形态由蠕虫链状向短棒状到球状胶束变化,而其在pH<3的水溶液中均形成球形胶束.由于特殊的链结构,聚合物的浓度对(P4VP-b-PS-b-P4VP)n多嵌段共聚物的胶束行为和胶束形态有着重要的影响.同时,(P4VP-b-PS-b-P4VP)n多嵌段共聚物分子量分布的多分散性对其在选择性溶剂中的胶束形态也有所影响.     

“双亲性”嵌段共聚物胶束形貌调控的研究*

本文综述了“双亲性”嵌段共聚物在选择性溶剂中胶束行为和胶束形貌的主要影响因素,包括溶液温度、选择性溶剂种类、嵌段长度、链段结晶、链段与溶剂间氢键作用以及共聚物浓度对胶束最终形貌产生影响的因素;系统介绍了对嵌段共聚物胶束形貌进行调控的实验方法;在此同时介绍了对环境刺激如温度和pH变化等具有响应性能的“双亲性”嵌段共聚物在选择性溶剂中胶束行为研究的最新进展;最后提出了该研究领域目前存在的问题和今后的可能发展方向。     

用SAXS/WAXS研究聚氧乙烯/聚氧丁烯嵌段共聚物在n-己烷中的结晶性球形胶束结构

嵌段共聚物在选择性溶剂中能够自组装形成胶束,胶束的不同形状与嵌段共聚物的结构、溶剂和浓度有关．无定形嵌段共聚物通常形成球形胶束,在某些情况下也可以形成其它形状的胶束,关于结晶性嵌段共聚物在无定形链段选择性溶剂中的胶束结构和形状的报道非常少．由于结晶和相似相溶两种作用力的竞争,使得这类胶束的形状丰富多变．通常结晶作用较强时,结晶性嵌段共聚物形成片状的胶束,当结晶组分比较少时,可形成棒状胶束,尽管理论上已经指出存在球形胶束,但尚无关于这方面的报道。     

不同嵌段比的PEG-b-PDMAEMA共聚物在水溶液中的自聚集行为

采用氢核磁共振(¹H-NMR)、动态光散射(DLS)及透射电子显微镜(TEM)对聚乙二醇-嵌段-聚甲基丙烯酸N,N-二甲氨基乙酯(PEG-b-PDMAEMA)三种具有不同PEG/PDMAEMA嵌段比的PEG-b-PDMAEMA共聚物在水溶液中的自聚集行为进行了研究. 研究表明, 两嵌段比例是影响聚合物胶束化过程的关键因素: 只有当其中聚乙二醇含量较低(质量分数低于33%)时, 聚合物才具有其pH/温度敏感胶束化特性. 此外, 共聚物溶液随温度胶束化过程与共聚物嵌段比大小密切相关. PEG-b-PDMAEMA这种不同于传统双亲性嵌段共聚物(DHBCs)在选择性溶剂中独特的胶束化行为, 是由聚合物溶液体系中各种基团之间的氢键作用决定的.     

苯乙烯-p-乙烯基苯甲酸两亲性嵌段共聚物在乙醇中自组装行为的电镜观察

两亲性嵌段共聚物在只对其中一链段为良溶剂的选择性溶剂中 ,能够自组装形成胶束 .胶束的形态和尺寸大小依赖于两链段的性质 ,共聚物的组成、浓度、溶剂的性质等[1] .这一性质使得嵌段共聚物在分子识别、药物和其他物质的输送、基因疗法、水系涂料、污染物的除去、纳米复合材料的制备、催化剂以及传感器等方面展示着潜在的应用前景 .因此 ,两亲性嵌段共聚物的合成及其在选择性溶剂中的自组装行为的研究近年来颇受关注[2 ] .依据两链段的比例不同 ,嵌段共聚物可形成星状胶束和“板寸头”(Ｃｒｅｗ ｃｕｔ)型胶束[3 ] .当可溶段远比不溶段长时…     

两亲性嵌段共聚物的自组装及载药胶束的研究

采用可逆-加成-断裂链转移自由基聚合(RAFT)技术合成了两亲性嵌段共聚物聚苯乙烯-b-聚甲基丙烯酸聚乙二醇单甲醚-b-聚苯乙烯(PSt-b-POEOMA-b-PSt),通过FT-IR、1 HNMR、GPC确定共聚物的结构。将三个具有不同嵌段比的共聚物在水溶液中自组装,通过透射电子显微镜(TEM)观察得到的胶束的形貌,发现随着亲水性嵌段的比例减小,胶束的直径略微减小。通过透析方法,以共聚物作为载体,负载维生素E,TEM观察载药胶束的形貌,仍然为核-壳状的球形胶束。差示扫描量热仪(DSC)测试共聚物载药胶束前后的热性能,发现药物分子在载入内核的过程中,聚苯乙烯的玻璃化转变温度(Tg)有所降低。通过紫外(UV)分析计算得出共聚物的药物负载量(DLC)为70%～80%。     

PDMS-b-PEO两亲性嵌段共聚物的合成及溶液性质

通过正丁基锂(n-BuLi)引发的六甲基环三硅氧烷(D3)阴离子开环聚合以及单硅氢封端聚二甲基硅氧烷(PDMS)与烯丙基聚氧乙烯醚(PEO)的硅氢加成反应, 合成得到了一系列分子量分布窄的PDMS-b-PEO两亲性嵌段共聚物. 利用凝胶渗透色谱(GPC)、傅里叶变换红外(FTIR)光谱、氢核磁共振谱(1H-NMR)表征了嵌段共聚物的结构组成. 通过表面张力仪测定得到了不同结构嵌段共聚物的平衡表面张力及临界胶束浓度(cmc). 结果显示, 该系列嵌段共聚物的cmc值不仅受到憎水性嵌段的影响, 同时也受嵌段共聚物的体积效应以及嵌段共聚物的几何形状(即嵌段共聚物各嵌段的比例)的影响, PDMS-b-PEO两嵌段共聚物的cmc值表现出了随憎水嵌段增加而相应增加的趋势. 通过透射电子显微镜(TEM)表征发现, PDMS-b-PEO嵌段共聚物在选择性溶剂水中会自组装形成球状、棒状以及囊泡状的聚集体.     

ABA两亲性嵌段共聚物在双选择性溶剂中自组装行为的Monte Carlo模拟

采用Monte Carlo模拟方法研究了ABA两亲性三嵌段共聚物在两种选择性溶剂中的自组装行为.模拟结果表明,在保证溶剂总浓度一定的情况下,改变两种选择性溶剂的体积比对于ABA两亲性嵌段共聚物自组装所形成的胶束形貌结构有很大影响.随着双选择性溶剂体积比的改变,体系中胶束形貌结构将会发生由囊泡到层状,再到环状、棒状直至球...     

嵌段共聚物结晶性胶束

近年来嵌段共聚物在选择性溶剂中由结晶驱动形成胶束的自组装过程因其较好的可控性逐渐受到人们的关注.本文首先综述了嵌段共聚物结晶性胶束形貌和尺寸的影响因素,包括溶剂环境、共聚物结构、结晶温度等.然后介绍了结晶性胶束的活性生长以及"嵌段共胶束";最后提出了该研究领域目前存在的问题和今后可能的发展方向.     

嵌段共聚物微胶束行为的研究Ⅲ．动态激光光散射法研究聚（苯乙烯－异戊二烯）星形嵌段共聚物在选择性溶剂中微胶束的形成过程

采用动态激光光散射研究聚（苯乙烯－异成二烯）（ＰＳ—ＰＩ）星形嵌段共聚物在选择性溶剂二氧六环／甲醇混合体系中微胶束的形成过程。讨论了温度、混合溶剂的组成、星形嵌段共聚物的臂数及组成对微胶束形成的影响。验证了临界接触浓度的存在。并就不同结构的星形嵌段共聚物形成微胶束的形成进行了讨论。     

聚甲基丙烯酸甲酯接枝聚氧乙烯共聚物溶液性质的研究

采用核磁共振 (NMR)、动态激光光散射 (DLS)、透射电子显微镜 (TEM )等方法研究了规整性聚甲基丙烯酸甲酯接枝聚氧乙烯共聚物溶液性质 ,研究表明两亲接枝共聚物在选择性溶剂中可形成球状胶束 ,溶液的浓度、温度和聚合物结构等因素影响其胶束的大小、形态     

窄分布两亲性嵌段共聚物的合成及其胶束化行为研究

利用原子转移自由基聚合合成了具有两亲性的嵌段聚合物聚苯乙烯-b-聚丙烯酸(PS-b-PAA),用FTIR,¹H NMR,SEC对其进行了表征,并利用荧光探针技术研究了其在水溶液中的胶束化行为.进一步的研究表明,PS-b-PAA胶束可对水中存在的多环芳香化合物芘有效地吸收并进而分离和回收.     

Micellization of PEO/PS block copolymers at the air/water interface: a simple model for predicting the size and aggregation number of circular surface micelles

Isotherms of monolayers of poly(ethylene oxide) (PEO) and polystyrene (PS) triblock copolymers spread at the air/water interface were obtained by film balance technique. In a low concentration regime, the PEO segments surrounding the PS cores behave the same way as in monolayers of PEO homopolymers. Langmuir-Blodgett (LB) films prepared by transferring the monolayers onto mica at various surface pressures were analyzed by atomic force microscopy (AFM). The results reveal that these block copolymers form micelles at the air/water interface. Within the micelles, the PS blocks act as anchoring structures at the interface. In several cases, aggregation patterns were modified by the dewetting processes that occur in Langmuir-Blodgett films transferred to solid substrates. High transfer surface pressures and metastable states favored these changes in morphology. A flowerlike surface micelle model is proposed to explain the organization of the surface circular micelles. The model can be generalized and applied to diblock copolymers as well. The model permits prediction of the aggregation number and the size of circular surface micelles formed by PEO/PS block copolymers at the air/water interface.     

Facile synthesis of core‐surface crosslinked nanoparticles by interblock RAFT polymerization

A new, efficient method for synthesizing stable nanoparticles with poly(ethylene oxide) (PEO) functionalities on the core surface, in which the micellization and crosslinking reactions occur in one pot, has been developed. First, amphiphilic PEO‐b‐PS copolymers were synthesized by reversible addition fragmentation chain transfer (RAFT) radical polymerization of styrene using (PEO)‐based trithiocarbonate as a macro‐RAFT agent. The low molecular weight PEO‐b‐PS copolymer was dissolved in isopropyl alcohol where the block copolymer self‐assembled as core‐shell micelles, and then the core‐shell interface crosslink was performed using divinylbenzene as a crosslinking agent and 2,2′‐azobisisobutyronitrile as an initiator. The design of the amphiphilic RAFT agent is critical for the successful preparation of core‐shell interface crosslinked micellar nanoparticles, because of RAFT functional groups interconnect PEO and polystyrene blocks. The PEO functionality of the nanoparticles surface was confirmed by ¹H NMR and FTIR. The size and morphology of the nanoparticles was confirmed by scanning electron microscopy, transmission electron microscopy, and dynamic laser light scattering analysis. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

环形嵌段共聚物的胶束化行为模拟

利用Monte Carlo模拟, 对比了相同组成下环形二嵌段共聚物AB和线形三嵌段共聚物ABA在选择性溶剂中的胶束化行为. 结果发现, 相同链组成的环形和线形嵌段共聚物的临界胶束浓度(cmc)的差别与A嵌段的比例(f_A)及B嵌段间的吸引强度(ε)密切相关. 在f_A较小、 ε较大的情况下, 相应环形嵌段共聚物的cmc值更小; 而在f_A较大、 ε较小的情况下, 线形嵌段共聚物的cmc值更小. 为了进一步理解胶束化行为同f_A及ε的关系, 计算了胶束化过程中熵和势能部分对自由能的贡献. 结果表明, 在所研究的f_A和ε范围内, 环形嵌段共聚物形成胶束时的熵损失更小, 因而从熵贡献角度来看, 环形嵌段共聚物更易发生胶束化. 而从势能贡献角度来看, 当f_A较小、 ε较大时, 环形嵌段共聚物形成胶束时势能有较大程度的降低, 对自由能的贡献更大, 因而此时环形嵌段共聚物更易发生胶束化. 而当f_A较大、 ε较小时, 线形嵌段共聚物形成胶束时势能有较大程度的降低, 对自由能的贡献更大, 因而此时线形嵌段共聚物更易发生胶束化. 由此可见, 对体系的胶束化自由能进行系统分析, 有助于更好地理解环形和线形嵌段共聚物的胶束化行为.     

Micellization phenomena of biodegradable amphiphilic triblock copolymers consisting of poly(beta-hydroxyalkanoic acid) and poly(ethylene oxide)

This paper reports the studies on micelle formation of new biodegradable amphiphilic poly(ethylene oxide)-poly[(R)-3-hydroxybutyrate]-poly(ethylene oxide) (PEO-PHB-PEO) triblock copolymer with various PHB and PEO block lengths in aqueous solution. Transmission electron microscopy showed that the micelles took an approximately spherical shape with the surrounding diffuse outer shell formed by hydrophilic PEO blocks. The size distribution of the micelles formed by one triblock copolymer was demonstrated by dynamic light scattering technique. The critical micellization phenomena of the copolymers were extensively studied using the pyrene fluorescence dye absorption technique, and the (0,0) band changes of pyrene excitation spectra were used as a probe for the studies. For the copolymers studied in this report, the critical micelle concentrations ranged from 1.3 x 10(-5) to 1.1 x 10(-3) g/mL. For the same PEO block length of 5000, the critical micelle concentrations decreased with an increase in PHB block length, and the change was more significant in the short PHB range. It was found that the micelle formation of the biodegradable amphiphilic triblock copolymers consisting of poly(beta-hydroxyalkanoic acid) and PEO was relatively temperature-insensitive, which is quite different from their counterparts consisting of poly(alpha-hydroxyalkanoic acid) and PEO.     

Characterization of amphiphilic hydrocarbon modified Poly(ethylene glycol) synthesized through ring-opening reaction of 2-(1-octadecenyl)succinic anhydride

Poly(ethylene glycol) (PEG) triblock and diblock amphiphilic block copolymers were synthesized from poly(ethylene glycol) and poly(ethylene glycol) monomethyl ether, respectively. The hydroxyl groups of PEG readily react with 2-(1-octadecenyl) succinic anhydride (OSA) at 140 °C through ring-opening reaction of the succinic anhydride. Both the PEG-OSA diblock and triblock copolymers are produced without use of any solvent or catalyst. The molecular structure of the copolymers was characterized by ¹H NMR and FTIR spectroscopy, and the thermal properties by DSC. The behavior of the copolymers in selective and nonselective solvents was studied by ¹H NMR spectroscopy in deuterium oxide and d-chloroform. The aggregation of the polymers in water was studied with a particle size analyzer and a transmission electron microscope (TEM) in bright field mode. The results show that the hydrophobic C₁₈ chain with intramolecular succinic anhydride linker can be attached to the hydrophilic PEG chain, an ester bond forming between the blocks. The copolymers exhibit flexible, liquid-like hydrophobic blocks even in water, which is a nonsolvent for OSA. PEG-OSA block copolymers self-organize in water, forming micellar polymer aggregates in nanoscale.     

Cleavage of polystyrene‐b‐poly(ethylene oxide) block copolymers with a trithiocarbonate linkage in solutions

In this work, the polystyrene‐b‐poly(ethylene oxide) (PS‐b‐PEO) block copolymers with a trithiocarbonate group between the blocks were prepared by polymerization of styrene in the presence of a trithiocarbonate reversible addition fragmentation chain transfer (RAFT) agent connected with PEO. Decomposition of the trithiocarbonate group by UV irradiation was investigated in three different types of solvent: tetrahydrofuran (THF, common solvent for both blocks), cyclohexane/dioxane mixture (selective solvent for the PS block) and N,N‐dimethylformamide (DMF)/ethanol mixture (selective solvent for the PEO block). It is found that cleavage of the block copolymers can take place in all these three solvents and the cleavage ratio ranges from 76 to 86%. The micellar morphologies in selective solvents before and after cleavage were examined. It is observed that the size of the micelles is reduced after cleavage and sometimes aggregation of the micelles occurs due to removal of the corona of micelles. It shows that this work provides a facile and general method for synthesis of cleavable block copolymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3834–3840, 2010     

Interaction of urea with pluronic block copolymers by 1H NMR spectroscopy

Solution 1H NMR techniques were used to characterize the interaction of urea with poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymers. The urea was established to interact selectively with the PEO blocks of the block copolymer, and the interaction sites were found not to change with increasing temperature. Such interactions influence the self-assembly properties of the block copolymer in solution by increasing the hydration of the block copolymers and stabilizing the gauche conformation of the PPO chain. Therefore, urea increases the critical micellization temperature (CMT) values of PEO-PPO-PEO copolymers, and the effect of urea on the CMT is more pronounced for copolymers with higher PEO contents and lower for those with increased contents of PPO segments.     

Dynamic and static light scattering studies on self-aggregation behavior of biodegradable amphiphilic poly(ethylene oxide)-poly[(R)-3-hydroxybutyrate]-poly(ethylene oxide) triblock copolymers in aqueous solution

The self-aggregation behavior of two amphiphilic poly(ethylene oxide)-poly[(R)-3-hydroxybutyrate]-poly(ethylene oxide) (PEO-PHB-PEO) triblock copolymer samples with nearly identical PHB block lengths but different PEO block lengths, PEO-PHB-PEO(2000-810-2000) and PEO-PHB-PEO(5000-780-5000), was studied with dynamic and static light scattering (DLS and SLS), in combination with fluorescence spectroscopy and transmission electron microscopy (TEM). The formation of polymeric micelles by the two PEO-PHB-PEO triblock copolymers was confirmed with fluorescence technique and TEM. DLS analysis showed that the hydrodynamic radius (R(h)) of the monodistributed polymeric micelles increased with an increase in PEO block length. The relative thermostability of the triblock copolymer micelles was studied by SLS and DLS at different temperatures. The aggregation number and the ratio of the radius of gyration over hydrodynamic radius were found to be independent of temperature, probably due to the strong hydrophobicity of the PHB block. The combination of DLS and SLS studies indicated that the polymeric micelles were composed of a densely packed core of hydrophobic PHB blocks and a corona shell formed by hydrophilic PEO blocks. The aggregation numbers were found to be approximately 53 for PEO-PHB-PEO(2000-810-2000) micelles and approximately 37 for PEO-PHB-PEO(5000-780-5000) micelles. The morphology of PEO-PHB-PEO spherical micelles determined by DLS and SLS measurements was further confirmed by TEM.