功能型微流控芯片实验室的研究及其应用

功能型微流控芯片实验室由芯片、芯片工作站、功能芯片试剂盒等3部分组成. 开展了不同类型的芯片设计,研制了有不同集成度和不同结构的玻璃芯片以及PMMA、PDMS和SU-8等塑料芯片,其中注塑型PMMA塑料芯片已具备规模生产的能力.     

生命分析化学的重要领域——电化学微阵列芯片

生命分析化学是研究与生命活动相关的化学分子检测原理与方法的新兴交叉科学领域。将电化学分析方法与生物芯片相结合形成的电化学生物芯片正在向集成化、通量化、微型化和自动化等方向迅速发展。本文介绍近年来电化学检测在DNA芯片、蛋白质芯片以及适配体芯片等方面有代表性的研究进展。文中阐述了高、低密度电化学DNA芯片的制备与多种伏安检测方法;讨论了多酶电极芯片结构与测定干扰之间的关系,介绍了伏安法、阻抗法等电化学方法在蛋白芯片中的应用进展。此外,还简要介绍了电化学适配体芯片的制备及检测方法,并展望了电化学生物芯片的发展前景。     

化学生物学中光敏分子微阵列的表面构建与应用

分子微阵列是有机合成（特别是组合化学合成）方法应用于生物和医学研究而发展起来的高科技集成技术,通过把微电子、微加工技术和有机化学合成反应相结合,在固体基质（如硅片、玻片、瓷片等）表面构建微型的生物有机化学分子系统,以实现对细胞、蛋白质、核酸及其他生物组分进行快速、敏感、高效地处理．近年来,随着表面化学构建策略研究的不断深入和迅猛发展,分子微阵列技术的应用领域不断拓展,已从最初用于核酸分子的杂交测序延伸到基因组功能研究的各个方面．本文着重综述了光敏分子微阵列的表面化学构建策略研究及其在化学生物学分析中应用的最新进展,并展望了其发展的未来趋势．内容主要包括：小分子与多肽分子微阵列、蛋白质分子微阵列、核酸分子微阵列和糖分子微阵列等．     

电泳芯片结构和芯片电泳分离操作参数的模拟、优化和实验验证

选择了L-精氨酸和L-苯丙氨酸为分离样品体系,根据电泳实验提出样品基本参数,通过模拟计算考察了进样管道宽度和进样时间对进样方差的贡献;根据分离度与分离长度拟合曲线确定电泳芯片的有效分离长度;对化学发光柱后衍生管道施加的夹流电压进行了模拟优化,得出氨基酸体系分离分析的电泳芯片设计方案和操作参数为:进样管道宽度为分离管道宽度的1/2,简单进样充样时间应大于5 s,分离管道有效分离长度为30 mm,衍生夹流比1.0~1.6。根据模拟优化结果提出了电泳芯片设计方案,采用整体浇注法制作带有柱后衍生反应器的PDMS电泳芯片,按照模拟计算提出的电压操作参数实现了精氨酸和苯丙氨酸样品体系的准确进样、芯片电泳分离和柱后衍生化学发光检测。电泳过程模拟结果和实验结果相结合,考察了柱后衍生对样品谱带展宽的影响,简单进样过程样品泄露引起的谱峰拖尾现象,并讨论了夹流进样法对减小进样方差和抑制样品泄露的贡献。     

微流控芯片上的细胞分析研究进展

近年来,微流控分析系统(μTAS)在生物细胞分离领域的发展引起了广泛的关注。微流控芯片的微米级尺寸的通道适合于单细胞样品的引入、操控、反应、分离和检测,已经在微芯片上实现了上述功能,并将这些功能集成在具备毛细管电泳分离功能的微芯片上。     

基于微流控芯片的微阵列分析

微阵列芯片具有高通量、微量化和自动化等特点,已经在很多领域得到广泛应用。但是微阵列芯片仍然具有不足之处,如所需设备昂贵、分析时间较长、灵敏度不高、多样品平行分析能力不足等。微流控芯片微米级的通道具有相对较大的比表面积和较短的扩散距离,能够显著加快分析速度、提高检测效率、增强分析性能,并且能够加工大量的平行通道用于多样品分析。目前已经有大量文献报道将微流控芯片和微阵列芯片相结合,发展了独特的杂交方式并在实验和理论上分别证明了两者相结合的优势,本文综述了将微流控芯片技术应用于微阵列分析的研究进展,着重介绍了在微流控芯片上进行微阵列分析时的杂交方式、促进杂交的措施以及杂交过程的数学建模,同时也介绍了其他分析步骤方面的进展。最后分析了目前微流控芯片技术在进行微阵列杂交应用方面的不足及其原因,并指出这两项技术相结合的优势和未来。     

注塑型聚甲基丙烯酸甲酯多通道微流控芯片的研制及其性能考察

微流控芯片技术因具有微量、快速、高效和高通量等特点,已成为分析化学领域中的研究热点之一．在微流控芯片中,最常见的可用作芯片的材料为玻璃、石英和各种塑料．玻璃和石英有很好的电渗性和光学性质,可采用标准的刻蚀工艺加工和用化学方法进行表面改性,但加工成本较高,封接难度较大．     

微流控芯片细胞实验室

以作者所在课题组近年开展的研究工作为基础,阐述了微流控芯片细胞实验室的平台特征,并从细胞个体、群体和多细胞生命体研究等三个方面概述微流控芯片细胞实验室的应用对象特征,显示其在生物医学领域的应用前景。     

农药残留快速检测芯片将实现产业化

芯片实验室是一项基于微流控芯片的技术．已被列入21世纪最为重要的前沿技术行列。不久前,留学法国的王晓东博士带着他的“基于微流控芯片技术的便携式农药残留快速检测系统的开发与产业化”项目来到杭州市萧山区．成功入选该区2014年第一批“5213”计划重点项目。     

芯片毛细管电泳

芯片毛细管电泳（ICEC）是一种新型的微全分析系统（μ-TAS），具有被分析的样品用量少、分析速度快、灵敏度高、体积小易携带、成本低等优点。文中介绍了芯片毛细管电泳的材料、结构、进样方式、检测手段、主要应用等方面的研究进展，并展望了其发展前景（引述文献77篇）。     

Increase of separation resolution through field enhancement in microchips

An enhanced ability to separate charged species from neutral compounds in a microfluidic chip is demonstrated using a chip design with low-resistance electrode channels operating with a multiport pressure/voltage controller. A factor of 2.7 improvement in resolution was obtained from chips made using identical mask designs but different etch depth protocols. Greater separation power allows one to cover a wider dynamic range for compounds with different electrophoretic mobilities.     

基于微流控芯片的乳腺癌细胞微环境酸化检测

建立了基于微流控芯片的乳腺癌微环境酸化模型和动态检测微环境酸化情况的分析方法。设计了一种多层复合式微流控芯片,将乳腺癌细胞悬液引入含有水凝胶前体的芯片培养室后,在硝酸纤维素薄膜上固化形成3D培养支架。芯片通道连续灌流模拟血流供应,并将非电化学的pH检测器引入芯片,通过图像分析得到实时的pH变化。通过观察癌细胞的存活率、增殖率、乳酸水平及pH值,分析微环境的酸化情况,同时与正常细胞进行比较。结果表明,连续灌流培养7 d,乳腺癌细胞的存活率保持在90%以上;随着培养天数的增加,芯片上癌细胞微环境的pH值逐渐降低,且灌流速度越低,pH值下降越明显,而正常细胞微环境的pH值无明显变化。基于微流控芯片的微环境酸化检测平台可实时动态检测微环境的pH值,有望成为相关肿瘤研究的有力工具。     

Direct measurement of lithium in whole blood using microchip capillary electrophoresis with integrated conductivity detection

The direct measurement of lithium in whole blood is described. Using microchip capillary electrophoresis (CE) with defined sample loading and applying the principles of column coupling, alkali metals were determined in a drop of whole blood. Blood collected from a finger stick was mixed with anticoagulant and transferred onto the chip without extraction or removal of components. The electrokinetic transport of red blood cells inside the channels was studied to find sample loading conditions suitable for the analysis of lithium without injecting cells into the separation channel. Both bare glass chips and chips coated with polyacrylamide were used showing the behavior of the cells under different electroosmotic flow conditions. In serum a detection limit for lithium of 0.4 mmol/L was reached. Proteins quickly contaminated untreated chip surfaces but devices with coating gave reproducible electropherograms. In addition, potassium and sodium were also detected in the same separation run. To our knowledge, this is the first device to directly measure ions in whole blood with the use of capillary zone electrophoresis on a microchip.     

Multistep liquid-phase lithography for fast prototyping of microfluidic free-flow-electrophoresis chips

We present a fast and versatile method to produce functional micro free-flow electrophoresis chips. Microfluidic structures were generated between two glass slides applying multistep liquid-phase lithography, omitting troublesome bonding steps or cost-intensive master structures. Utilizing a novel spacer-less approach with the photodefinable polymer polyethyleneglycol dimethacrylate (PEG-DA), microfluidic devices with hydrophilic channels of only 25 μm in height were generated. The microfluidic chips feature ion-permeable segregation walls between the electrode channels and the separation bed and hydrophilic surfaces. The performance of the chip is demonstrated by free-flow electrophoretic separation of fluorescent xanthene dyes and fluorescently labeled amino acids.     

微流控芯片系统在循环肿瘤细胞分离检测中的应用进展

循环肿瘤细胞(CTCs)的分离分析一直是肿瘤相关研究中的热点方向,作为液体活检的重要标志物之一,其在外周血中的含量与癌症病发状况密切相关.然而人体血液中CTCs的含量非常低,通常来说仅有0～10个/mL,因此在开展临床血液样本中CTCs的检测前,往往需要对样本进行前处理,以实现CTCs的分离和富集.微流控芯片技术凭借样...     

Dielectrophoretic separation of microalgae cells in ballast water in a microfluidic chip

The composition of the ship's ballast water is complex and contains a large number of microalgae cells, bacteria, microplastics, and other microparticles. To increase the accuracy and efficiency of detection of the microalgae cells in ballast water, a new microfluidic chip for continuous separation of microalgae cells based on alternating current dielectrophoresis was proposed. In this microfluidic chip, one piece of 3‐dimensional electrode is embedded on one side and eight discrete electrodes are arranged on the other side of the microchannel. An insulated triangular structure between electrodes is designed for increasing the inhomogeneity of the electric field distribution and enhancing the dielectrophoresis (DEP) force. A sheath flow is designed to focus the microparticles near the electrode, so as to increase the suffered DEP force and improve separation efficiency. To demonstrate the performance of the microfluidic separation chip, we developed two species of microalgae cells (Platymonas and Closterium) and a kind of microplastics to be used as test samples. Analyses of the related parameters and separation experiments by our designed microfluidic chip were then conducted. The results show that the presented method can separate the microalgae cells from the mixture efficiently, and this is the first time to separate two or more species of microalgae cells in a microfluidic chip by using negative and positive DEP force simultaneously, and moreover it has some advantages including simple operation, high efficiency, low cost, and small size and has great potential in on‐site pretreatment of ballast water.     

Separation of platelets from whole blood using standing surface acoustic waves in a microchannel

Platelet separation from blood is essential for biochemical analyses and clinical diagnosis. In this article, we propose a method to separate platelets from undiluted whole blood using standing surface acoustic waves (SSAWs) in a microfluidic device. A polydimethylsiloxane (PDMS) microfluidic channel was fabricated and integrated with interdigitated transducer (IDT) electrodes patterned on a piezoelectric substrate. To avoid shear-induced activation of platelets, the blood sample flow was hydrodynamically focused by introducing sheath flow from two side-inlets and pressure nodes were designed to locate at side walls. By means of flow cytometric analysis, the RBC clearance ratio from whole blood was found to be over 99% and the purity of platelets was close to 98%. Conclusively, the present technique using SSAWs can directly separate platelets from undiluted whole blood with higher purity than other methods.     

Laser-photophoretic migration and fractionation of human blood cells

Laser photophoretic migration behavior of human blood cells in saline solution was investigated under the irradiation of Nd:YAG laser beam (532 nm) in the absence and the presence of the flow in a fused silica capillary. Red blood cells (RBC) were migrated faster than white blood cells (WBC) and blood pellets to the direction of propagation of laser light. The observed photophoretic velocity of RBC was about 11 times faster than those of others. This was understood from the larger photophoretic efficiency of RBC than that of WBC, which was simulated based on the Mie scattering theory. Furthermore, it was found that, during the photophoretic migration, RBCs spontaneously orientated parallel to the migration direction so as to reduce the drag force. Finally, it was demonstrated that RBC and WBC were separated in a micro-channel flow system by the laser photophoresis.     

Dielectrophoretic separation of platelets from diluted whole blood in microfluidic channels

The dielectrophoresis (DEP) phenomenon is used to separate platelets directly from diluted whole blood in microfluidic channels. By exploiting the fact that platelets are the smallest cell type in blood, we utilize the DEP-activated cell sorter (DACS) device to perform size-based fractionation of blood samples and continuously enrich the platelets in a label-free manner. Cytometry analysis revealed that a single pass through the two-stage DACS device yields a high purity of platelets (approximately 95%) at a throughput of approximately 2.2 x 10(4) cells/second/microchannel with minimal platelet activation. This work demonstrates gentle and label-free dielectrophoretic separation of delicate cells from complex samples and such a separation approach may open a path toward continuous screening of blood products by integrated microfluidic devices.     

DNA fragment‐assisted microfluidic chip for capture and release of circulating tumor cells

Circulating tumor cells are specifically referred as cells that detached from the primary tumor and are present in the bloodstream. They could be isolated from blood and used as representative biomarker for predicting cancer prognoses. Here, we developed a microfluidic chip with multiple curved channels, in which DNA fragments and antibody‐based enrichment are exploited to capture circulating tumor cells in blood sample. By introducing DNA fragments as long tentacles, the active antibody could be extended into the microchannel stereoscopically, which could greatly increase the chances of adhesion in a multidirectional way and improve the capture efficacy. Several pivotal factors for cell capturing were optimized to the best state. Compared to conventional chips for planar capturing, the capture efficiency of MCF‐7 cells was greatly increased from 37.17 to 85.10%. For the detection of MCF‐7‐containing artificial blood sample detection, the capture efficiency of tumor cells was about 74.19 ± 2.13%, which was obviously better than the result of flow cytometry (29.67 ± 4.02%). Captured cells were easily released from the surface of microfluidic chip with high cell viability, which could be investigated for the molecular analysis in the field of tumor diagnosis.