Dy3+在Ba3La(BO3)3 中的光致发光

研究了Ba3La(BO3)3 基质中Dy3 的光致发光特性; 探讨了RE3 的电荷半径比(z/r)和Ce3 , Dy3 含量对Dy3 发光强度及发光颜色的影响; 分析了Ba3La(BO3)3 中Ce3 对Dy3 发光的敏化作用; 确定了Dy3 的 4F9/2→6H15/2及4F9/2→6H13/2跃迁发射的浓度猝灭机制均为电偶极-电四极相互作用.     

钙钛矿CH3NH3PbI3晶体的电化学

电化学方波伏安及循环伏安测量表明,钙钛矿CH₃NH₃PbI₃晶体在有机电解质中的氧化还原过程伴随着化学降解。该化学降解源于CH₃NH₃PbI₃晶体中铅离子的还原以及碘离子的氧化。通过电化学伏安法可以测定晶体的能带。     

LaVO3和NdVO3的合成

以Ｖ２Ｏ３为起始原料，在氩气中合成了ＡＢＯ３型稀土钒化合物，对加热前通氩气的时间，Ｖ２Ｏ３∶Ｌａ２Ｏ３的配比等进行了探讨，得到了适宜的制备条件。首次报道了ＬｎＶＯ３（Ｌｎ＝Ｌａ，Ｎｄ）的热学性质，发现ＬａＶＯ３具有吸附二氧化碳的特性。     

KMgF3:Ce3+,Tb3+纳米粒子中Ce3+→Tb3+的发光及能量传递

利用微乳液方法,合成了铈、铽共掺杂的氟镁钾纳米粒子,研究了体系中Ce3+→Tb3+的发光特性以及它们之间的相互作用,结果表明KMgF3:Ce3+Tb3+纳米粒子中存在Ce3+→Tb3+的能量传递过程,即Ce3+可以将吸收的能量直接传递给Tb3+离子,使得Tb3+的绿色发光强度大为增加.     

Non-Isothermal Kinetics of the Decomposition Reaction of Cluster [Ag3WS3Br]（PPh3）3 and [Cu3WS3Br]（PPh3）3

The thermal behaviors of clusters [Ag3WS3Br](PPh3)3 and [Cu3WS3Br](PPh3)3 (PPh3=triphenyl phosphine) in a nitrogen atmosphere were studied under the non-isothermal conditions by simultaneous TG-DTG-DSC and EDS techniques. The results showed that the evolution of PPh3 generally proceeded before the release of the other moiety in one or two step-mode. The mechanisms, the kinetic and the thermodynamic parameters for decomposition of PPh3 of both clusters were determined and calculated by jointly using several methods, which showed that its evolution was controlled by Avrami-Erofeev equation. The results also showed that there was no new stable phase composed of W-Ag(Cu)-S-Br after release of organic moiety PPh3 and that CVD method was not applicable to their further processing.     

有关NdCl_3·3ROH-AlEt_3催化体系的活性

<正> 我们曾指出,在NdCl_3·3ROH-AlEt_3体系中,醇的作用在于它的给电子性将会降低稀土离子的正电性,从而减弱Nd-Cl键的离子性,同时引起晶格的变化,使之有利于烷基化作用的发生,导致活性提高。本实验采用一种简便的方法证实了这种作用的发生。 这个方法所根据的原理是一般Ziegler-Natta型催化组分的熟知反应形式:     

紫外光辐照下CH3NH3PbI3基钙钛矿太阳能电池失效机制

随着光伏产业的不断发展,有机无机杂化钙钛矿太阳能电池的研发成为科学与工业界广泛关注的焦点。到目前为止,其光电转换效率已经提高到了25.2%,成为替代硅基太阳能电池的核心方案之一。然而,钙钛矿太阳能电池的稳定性较差,容易受到环境中氧气、水分、温度甚至光照的影响,这严重制约了其大规模推广与应用。大量科学研究表明,如何避免紫外辐照下有机无机杂化钙钛矿太阳能电池的性能衰减,对于提高钙钛矿太阳能电池的光照稳定性至关重要。然而到目前为止,仍然没有系统的工作来对紫外辐照下钙钛矿太阳能电池性能以及微结构演化过程进行详细的表征与分析。本文中,我们利用聚焦离子束-扫描电子显微分析(FIB-SEM)以及球差校正透射电子显微分析(TEM)等技术,全面地研究了紫外辐照过程中有机无机杂化钙钛矿太阳能电池性能变化规律以及电池微结构演化特征。实验结果表明,紫外辐照过程中太阳能电池内部会形成0.5–0.6 V的内建电场,钙钛矿中的I^-离子在电场的驱动下向金属Au电极和空穴传输层2, 2’, 7, 7’-四[N, N-二(4-甲氧基苯基)氨基]-9, 9'-螺二芴(Spiro-OMeTAD)一侧迁移;随后,空穴传输层与金电极的界面处,碘离子与光生空穴一起与金电极发生反应,将金属态Au氧化成离子态Au⁺。而Au⁺离子则在内建电场的驱动下反向迁移穿过钙钛矿MAPbI₃层,直接被SnO₂和MAPbI₃界面处的电子还原形成金属Au纳米团簇。除此之外,紫外辐照过程中钙钛矿太阳能电池性能降低的同时,往往伴随着Spiro-OMeTAD与钙钛矿界面处物质迁移、钙钛矿薄膜内晶界展宽以及Au纳米颗粒周围MAPbI₃物相分解等现象。以上各种因素的协同作用,共同导致了紫外光照下有机无机杂化钙钛矿太阳能电池光电转换性能(PCE)、开路电压(V_oc)以及短路电流(J_sc)等性能参数的急剧下降。     

LaBO_3、GdBO_3中Eu~(3+)和Bi~(3+)的发光特性及其相互作用

在紫外光(UV)和阴极射线(CR)激发下,系统地研究了LaBO_2、GdBO,中Eu~(3+)和Bi~(3+)的发射光谱、激发光谱及发光寿命与组成和结构的关系。结果表明,在文石结构的LaBO_3中Eu~(3+)的发射光谱与在YBO,结构的GdBO_3中Eu~(3+)的光谱有明显的差別。在紫外光激发下,GdBO_3中的Bi~(3+)能敏化Eu~(3+)的发光,而在LaBO_3中的Bi~(3+)却猝灭Eu~(3+)的发光。     

CaSiO_3中Tb~(3+)的发光及Ce~(3+)→Tb~(3+)的能量传递

研究了CaSiO_3中Tb~(3+)的发光特性、荧光衰减、浓度猝灭及Ce~(3+)→Tb~(3+)的无辐射能量传递,讨论了Ce~(3+)、Tb~(3+)浓度对发光性能的影响。根据电多极子相互作用参数的拟合结果,指明Ce~(3+)→Tb~(3+)的高效能量传递主要是电偶极—偶极相互作用的结果。     

PbO-PbI2复合物膜转化的CH3NH3PbI3钙钛矿薄膜及其光电特性

有机-无机卤化物钙钛矿是一类优异的光电材料. 在过去四年内, 基于有机-无机卤化物钙钛矿的光电器件实现了超过15%的光电转换效率. 而有机-无机卤化物钙钛矿材料的可控制备是保证其在光电器件中应用的基础. 本文采用新的沉积方法在玻璃衬底表面制备了一种典型的有机-无机卤化物钙钛矿CH₃NH₃PbI₃薄膜. 其制备过程是: 采用超声辅助的连续离子吸附与反应法在玻璃衬底表面沉积PbO-PbI₂复合物膜, 之后与CH3NH3I蒸汽在110 ℃环境下反应, 将PbO-PbI₂复合物膜转化成CH₃NH₃PbI₃钙钛矿薄膜. 对CH₃NH₃PbI₃薄膜的微观结构, 结晶性及其光电性能等进行了表征. 结果表明, CH₃NH₃PbI₃薄膜呈晶态, 具有典型的钙钛矿晶体结构. 薄膜表面形貌均匀, 晶粒尺寸超过400 nm. 在可见光范围, CH₃NH₃PbI₃薄膜透过率低于10%, 能带宽度为1.58eV. 电学性能研究表明CH₃NH₃PbI₃薄膜表面电阻率高达1000 MΩ. 高表面电阻率表明CH₃NH₃PbI₃薄膜具有一定的介电性能, 其介电常数(ε_r)在100 Hz时达到155. 本研究提出了一种制备高质量CH₃NH₃PbI₃钙钛矿薄膜的新方法, 所得CH₃NH₃PbI₃薄膜可望在光、电及光电器件中得到应用.     

两亲性季铵盐对钙钛矿太阳能电池效率和稳定性的影响

将廉价易得的两亲性季铵盐十六烷基三甲基溴化铵（CTMAB）加入到钙钛矿前驱体溶液中，通过调节添加量研究了CTMAB对钙钛矿太阳能电池效率和稳定性的影响.结果表明，加入CTMAB后制备的钙钛矿薄膜更加致密均匀，表面缺陷更少，钙钛矿晶体结晶性得到显著提高，从而提高了电池的光电转换效率及电池稳定性；含有CTMAB的钙钛矿太阳能电池的光电转换效率（PCE）为18.03%，明显高于未添加CTMAB的电池效率（17.05%）；含有CTMAB的电池稳定性有较大的提高，在一定湿度环境中保存40 d后效率仍达初始效率的95%，而未添加CTMAB的器件效率只有初始效率的70%.     

空气下光诱导有机金属卤化钙钛矿薄膜的降解机理

近几年来钙钛矿材料作为新兴光伏材料取得了巨大的发展进步,但有机无机杂化钙钛矿较差的环境稳定性限制了它的大规模应用。因此深入研究钙钛矿材料的降解机制有助于开发更稳定的钙钛矿光伏器件。本文基于透射电子显微学的微观形貌观察、晶体结构及元素成分表征,详细研究了杂化钙钛矿CH_3NH_3PbI_3薄膜在光照以及空气共同作用下的降解机理。研究发现,光诱导下CH_3NH_3PbI_3薄膜会与空气中的氧气发生交互作用,同时生成六方晶态PbI_2甚至氧化为非晶态化合物PbI_(2-2x)O_x (0.4 x 0.6),而其衰减位点主要存在于薄膜与空气接触的表面。降解过程中,由于存在着挥发性分解产物(I_2,CH_3NH_2)的大量丢失,薄膜的表面会产生许多小孔洞,继而形成一种蜂窝状的介孔衰竭通道。而这种衰竭方式主要与光照下钙钛矿中光生电子与氧气结合形成超氧根自由基(O_2~(·-))有关,该基团诱导了CH_3NH_3PbI_3向PbI_2和非晶氧化态的转变。本文揭示了空气中光照诱导钙钛矿薄膜的降解机理,这将为未来设计和优化更稳定的钙钛矿太阳能电池提供全面的实验数据与理论支持。     

少铅钙钛矿CH3NH3SrxPb(1-x)I3的合成及其在全固态薄膜太阳能电池中的应用

近年来, 有机-无机杂化铅卤化物钙钛矿太阳能电池(PSCs)得到了迅猛发展, 其最高光电转换效率已经达到19.3%. 该类型太阳能电池使用的钙钛矿型吸光材料为含Pb的有机-无机杂化铅卤钙钛矿, 从长远来看,Pb的毒性将制约其大规模应用. 本文从减少吸光材料中Pb的含量出发, 尝试用Sr 部分取代Pb制备一系列少铅钙钛矿CH₃NH₃Sr_xPb_(1-x)I₃, 并将其应用于钙钛矿太阳能电池进行光电性能的研究. 研究结果表明, 相比于全Pb 钙钛矿(CH₃NH₃PbI₃)材料, Sr 取代量为30% (x=0.3)时, 所形成的CH₃NH₃Sr_0.3Pb_0.7I₃光谱吸收大范围增强,但基于此材料制备的电池器件性能明显下降.     

The reaction of cis dioxobis(2,4 pentanedionato)molybdenum (VI) and 2,2′ pyridylbenzoxazole (L), a novel route to β[Mo8O26]

MoO₂(C₅H₇O₂)₂, where C₅H₇O₂ is 2,4-pentanedione (acac), reacts with 2-2′ pyridylbenzoxazole in acetone to give a product with stoichiometry, Mo₃C₂₄H₁₆N₆O₁₂. This product dissolves readily in dimethylformamide to give a brown solution which on standing for several weeks yielded crystals. An X-ray structure determination showed these crystals to contain uncoordinated 2-2′pyridylbenzoxazole and [(CH₃)₂NH₂]₄⁺[Mo₈O₂₆]⁴⁻.     

Synthesis and characterization of NaSbS2 thin film for potential photodetector and photovoltaic application

Solution-processed semiconductors such as perovskite compounds have attracted tremendous attention to photovoltaic research due to the significantly higher energy conversion efficiencies and lower processing costs.However,concerns over stability and the toxicity on lead in CH_3NH_3PbI_3 create the need for still easily-accessible but more stable and environmentally friendly materials.Here,we present NaSbS_2 as a non-toxic,earth-abundant promising material consisting of densely packed(1/∞)[SbS_2~-]polymeric chains and sodium ions.The ionic nature makes it sharing the similar dissolution superiority with perovskite,providing great potential for low-cost and large-scale fabrication.Phase pure NaSbS_2thin film was successfully fabricated using spray-pyrolysis method,and its photovoltaic relevant material,optical and electrical properties were carefully studied.Finally,a prototype NaSbS_2-based thinfilm solar cell has been successfully demonstrated,yielding a power conversion efficiency of 0.13%.The systematic experimental and theoretical investigations,combined with proof-of-principle device results,indicate that NaSbS_2 is indeed very promising for photovoltaic application.     

一个各向异性磁稀释杂化钙钛矿系列[CH3NH3][CoxZn1-x(HCOO)3]

Inorganic-organic or hybrid perovskite materials, which are the complementary counterparts of pure inorganic perovskites, can provide many new opportunities in the researches of phase transitions, critical phenomena, and relevant properties, as they combine the characteristics of inorganic and organic components. Therefore, the hybrid perovskites of ammonium metal formate framework are very promising, and their properties have been found to be strongly dependent on the characteristics of the constituent metal ions and/or ammonium ions. Herein, we used solid solution strategies, borrowed from solid state chemistry, to investigate the anisotropic diluted magnetic hybrid perovskite system of [CH₃NH₃][Co_xZn_1-x(HCOO)₃], wherein the B-sites are occupied by the mixed metal ions of Co²⁺ and Zn²⁺. The solid solution compounds of this series in the range x = 0–1 (or the molar percent Co% = 0–100%) were successfully prepared using conventional solution chemistry methods. The resulting compounds were demonstrated to be iso-structural by using both single-crystal and powder X-ray diffraction analyses. The solid solution crystals belong to the orthorhombic space group Pnma, with the cell parameters being a = 8.3015(2)–8.3207(3) Å, b = 11.6574(4)–11.6811(5) Å, c = 8.1315(3)–8.1427(4) Å, and V = 787.89(5)–790.98(7) ų. The perovskite structure consists of a simple cubic anionic metal-formate framework and CH₃NH₃⁺ cations which are located in the framework cavities, with N―H···O hydrogen bonds formed between the framework and the cation. The members of this series showed negligible changes (< 0.4%) in their respective lattice and structural parameters. Thus, the prepared solid solution compounds constitute good molecule-based examples for the study of magnetic dilution under almost the same structural parameters and molecular geometries. Upon dilution, the magnetization per mole of Co at low temperatures and low fields was suppressed by the magnetic anisotropy of Co²⁺ and gradual destruction of the large spin canting between coupled Co²⁺ ions, in contrast to the magnetization enhancement observed in the isotropic diluted system of [CH₃NH₃][Mn_xZn_1-x(HCOO)₃] with the same perovskite structure. The percolation limit was estimated as (Co%)_P = 27(1)% (or x_P = 0.27(1)) from the magnetic data, which was slightly lower than that predicted by the percolation theory for a simple cubic lattice (31%); this trend was due to the strong magnetic anisotropy of the present system. In addition, rare incommensurate phase transitions were primarily detected below ~120 K for the pure Co and Zn members, which may also affect the magnetic properties of the materials.     

Solution-processed CuOx as an efficient hole-extraction layer for inverted planar heterojunction perovskite solar cells

A solution-processed CuO_x film has been successfully integrated as the hole-transporting layer (HTL) for inverted planar heterojunction perovskite solar cells (PVSCs). The CuO_x layer is fabricated by simply spin-coating a copper acetylacetonate (Cu(acac)₂) chloroform solution onto ITO glass with high transparency in the visible range. The compact and pinhole-free perovskite film with large grain domains is grown on the CuO_x film. The inverted PVSCs with the structure of ITO/CuO_x/MAPbI₃/PC₆₁BM/ZnO/Al are fabricated and show a best PCE of 17.43% under standard AM 1.5G simulated solar irradiation with a V_OC of 1.03 V, a J_SC of 22.42 mA cm^-2, and a fill factor of 0.76, which is significantly higher and more stable than that fabricated from the often used hole-transporting material PEDOT:PSS (11.98%) under the same experimental conditions. The enhanced performance is attributed to the efficient hole extraction through the CuO_x layer as well as the high-quality CH₃NH₃PbI₃ films grown on the CuO_x. Our results indicate that low-cost and solution-processed CuO_x film is a promising HTL for high performance PVSCs with better stability.