不同取代位置的萘衍生两亲分子在气/液界面组装膜中的螺旋结构与圆偏振发光

Langmuir-Blodgett(LB)技术可在二维气/液界面上精确地控制分子之间的排列及堆积方式, 构建有序超薄膜及纳米组装体. 同时, 界面这一不对称环境也可有效放大组装体的手性信息, 实现超分子体系中的手性传递和手性放大. 本文研究了萘环取代位置不同的两种手性两亲分子——N,N′-双十八烷基-α-萘-L-氨基-谷氨酸二酰胺(1NLG)和N,N′-双十八烷基-β-萘-L-氨基-谷氨酸二酰胺(2NLG)在气/液界面的铺展及组装行为, 发现同分异构效应影响了两亲分子在界面的排列, 1NLG组装形成了均一的纳米带状结构, 而2NLG则形成了左手螺旋结构, 并且2NLG薄膜表现出圆偏振发光(CPL)性质, 其不对称因子(g_lum)比三维体相组装体(超分子凝胶)大23倍, 表明界面促进了超分子手性的放大.     

柔性间隔基对于香豆素取代二乙炔LB膜聚合及手性形成的影响

设计合成了2种香豆素取代二乙炔单体,7-(10,12-二十三双炔酰氧基)-香豆素(CODA)和7-(10,12-二十三双炔酰氧乙氧基)-香豆素(CO2DA),研究了柔性间隔基对香豆素取代二乙炔单体在气-液界面的组装、单体LB膜的聚合以及聚二乙炔主链螺旋结构形成的影响.利用Langmui-Blodgett(LB)技术,以纯水为亚相,膜压在35 mN/m时沉积制备了香豆素取代二乙炔单体LB膜.尽管CODA是非手性的,但其LB膜均表现出明显的宏观手性信号.这是由于在压缩过程中香豆素基团间强烈的π-π堆积,形成了螺旋排列,显示出超分子手性.而CO2DA LB膜无明显CD信号.经254 nm紫外光辐照,CODA LB膜聚合成蓝相,聚二乙炔主链表现出明显的宏观手性.而CO2DA LB膜聚合后无明显的CD信号.薄膜中香豆素功能基团的不规则排列不利于二乙炔单体的固态聚合以及聚二乙炔主链螺旋结构的形成.     

二苯丙氨酸短肽手性结构的可控组装

以阳离子二苯丙氨酸（Cationic dipeptide,CDP）为组装基元,通过控制熟化时间,在乙醇溶液中分别获得了平滑的纳米纤维和螺旋纤维结构.通过红外光谱和圆二色光谱系统研究了CDP在乙醇溶液中的组装体随时间的变化.研究发现,CDP在乙醇中可以组装成纳米纤维的结构.随着在乙醇中熟化时间的增加,CDP纳米纤维发生扭曲,最终组装成绳状的螺旋纤维结构.光谱数据分析表明纳米纤维转变成螺旋纤维主要源于相邻肽分子中的正电荷之间的强静电排斥作用和肽分子间氢键作用控制的β-折叠二级结构.这项工作通过简单的控制熟化时间实现了对超分子组装体结构的调控,为超分子手性组装体的可控制备提供了一种简单可行的方法.     

奇偶效应诱导的苯丙氨酸类水凝胶手性反转

为了模拟生物大分子(如DNA和蛋白质等)螺旋手性反转的现象,设计合成了4种酰胺基或脲基共价连接L-苯丙氨酸和苯环,外围为二甘醇胺与3-氨基-1,2-丙二醇的C2对称小分子凝胶因子,利用酰胺基(CONH)与脲基(NHCONH)之间的奇偶效应实现了超分子螺旋手性的反转.通过核磁共振波谱仪(1H-NMR和13C-NMR),高分辨质谱仪(HRMS)对凝胶因子结构和分子量进行了分析表征.并运用圆二色光谱(CD)、扫描电子显微镜(SEM)、紫外可见吸收光谱(UV-Vis)和红外光谱(FTIR)对其组装纤维结构和组装方式进行研究.实验结果表明酰胺基(CONH)与脲基(NHCONH)之间的奇偶效应改变凝胶因子的组装方式,调控了超分子手性特征,实现了超分子水凝胶螺旋手性的反转.     

聚苯乙烯-聚(4-乙烯基吡啶)嵌段共聚物LB膜结构形态的研究

采用氯仿作为铺展溶剂,将嵌段共聚物聚苯乙烯-聚(4-乙烯基吡啶)(PS-b-P4VP)稀溶液铺展于空气与水界面上,利用Langmuir-Blodgett(LB)膜技术转移至固体基底.研究了不同的嵌段比、表面压和小分子1-芘丁酸(PBA)的加入对嵌段共聚物气液界面聚集组装的影响.研究发现随着亲水段(P4VP)的增加,聚集组装结构由纳米片状、带状转变成纳米条状、纳米点状结构.表面压对纯PS-b-P4VP聚集组装产生影响,表面压增大,组装体排列紧密;随着表面压的继续增大,单层聚集结构遭到破坏,发生堆叠.加入PBA小分子后,PBA与PS-b-P4VP形成氢键,形态发生明显变化,原来的片状结构转变为条状或点状结构.     

芳香席夫碱衍生物在有序分子膜中的相行为与二维-三维形变

研究了芳香席夫碱的设计合成、界面相行为以及与铜离子的配位过程,并与离位合成的铜复合物的界面组装行为进行了对比.利用表面压-面积等温线、紫外光谱、红外光谱、原子力显微镜等一系列实验方法来详细表征组装膜.结果表明,席夫碱配体与铜复合物均可在气液界面上形成稳定的有序组装膜,并可以转移到固体基片上构筑多层膜.进而,席夫碱配体在纯水界面上表现出奇特的相变.在相变点前后,二维的平膜变化成了三维的纤维状组装结构.然而,对于铜离子亚相上的组装过程却没有出现较大的变化.两者之间明显的差异可归因于在气液界面超分子组装过程中的分子构型以及疏水性能的不同引起的.目前的工作为制备和调控有序组装膜提供了有益探索.     

四(十六烷硫基)四硫富瓦烯/硬脂酸混合LB膜的结构研究

我们考察了四(十六烷硫基)四硫富瓦烯/硬脂酸(THT-TTF:SA=1:n)在气一液界面的聚集状态及在LB膜中的排列.当n=1时,THT-TTF分子在气-液界面形成了双分子膜;当n>6时,THT-TTF分子形成了单分子膜;1相似文献   

超分子作用构筑具有高光学不对称性的表面等离子纳米粒子手性组装体

《Science》杂志最近刊发了吉林大学刘堃团队关于手性纳米材料研究的重要进展: 通过超分子作用诱导金纳米棒与人胰岛淀粉样多肽之间共组装, 构筑具有类似于手性液晶结构的纳米螺旋超结构. 与单独的金纳米棒相比, 长程有序的纳米螺旋结构的手性各向异性因子(g-factor)提高了4600倍, 高达0.12. 该工作在液晶与手性无机纳米结构间建立了联系, 为构筑有机-无机光学活性结构提供了统一的设计原则, 并为淀粉样类疾病药物在复杂生物介质中的筛选开发了新方法.     

稀土基亚纳米材料

亚纳米材料是近年来不断发展的新兴材料。一维亚纳米材料具有独特的类高分子性质,可借鉴高分子的表征和成型方法来研究。例如,羟基氧化钆(GdOOH)亚纳米线通过静电纺丝制成的纤维具有不错的力学强度,可以制成大面积的无纺布;通过湿法纺丝制成的薄膜具有双折射性质,掺入量子点后可发出线偏振荧光。在没有外加手性试剂的情况下,GdOOH亚纳米线溶液经过溶剂挥发会形成自组装螺旋体,通过手性转移使得非手性荧光分子发出圆偏振荧光。单个多酸(POM)团簇分子可以被看作是零维亚纳米材料,通过掺入稀土元素和添加合适配体,可以得到POM团簇自组装亚纳米线。调节pH值可以精确调控团簇自组装行为,得到纳米环和三维超组装体,它们具有更佳的H_2O_2电化学检测灵敏度。这些工作揭示了亚纳米线新型功能材料在光学、力学、催化等领域中的巨大潜力。     

以卵磷脂为手性添加剂制备手性介孔二氧化硅

以十六烷基三甲基溴化铵(CTAB)的自组装体为模板,卵磷脂(PC)为手性添加剂,在n PC∶nCTAB=1∶21时,通过溶胶-凝胶法制备了螺旋介孔二氧化硅纳米棒。利用扫描电镜(FESEM)、透射电镜(TEM)、X-射线衍射以及氮气吸附-脱附等测试手段,对该纳米棒的形貌以及孔结构进行了表征。TEM显示该纳米棒的长度约为50～200 nm,直径约为30～50 nm。X-射线衍射表明孔道呈二维六方排列,虽然FESEM显示纳米棒左右手比例约为1∶1,但通过圆二色谱表征证明该纳米棒在埃尺度下倾向于形成单一手性。结果表明,卵磷脂的手性可以传递到螺旋介孔二氧化硅纳米棒中。     

Langmuir-Blodgett films and chiroptical switch of an azobenzene-containing dendron regulated by the in situ host-guest reaction at the air/water interface

An amphiphilic dendron containing an azobenzene ring at the focal point and the l-glutamate peripheral groups was designed. Its monolayer formation and host-guest reaction with cyclodextrins at the air/water interface and the properties of the transferred Langmuir-Blodgett (LB) films were investigated. The individual dendron, although without any long alkyl chains, could still form a stable monolayer at the air/water interface because of the good balance between hydrophilic and hydrophobic parts within the molecule. When cyclodextrin (CyD) was added to the subphase, a host-guest reaction occurred in situ at the air/water interface. The inclusion of the focal azobenzene moiety into the cavity of cyclodextrin decreased the packing of the aromatic ring and also led to the diminishment of the molecular area. Both the films formed at the surface of pure water and aqueous cyclodextrins were transferred onto solid substrates. Nanofiber structures were obtained for the film from the water surface as a result of the packing of the azobenzene groups, and circular domains were obtained for the film transferred from the aqueous CyD phases. The film transferred from the water surface showed an exciton couplet in the absorption band of azobenzene, whereas a negative Cotton effect was obtained for the film from CyD subphases. It was found that the supramolecular chirality in the LB film transferred from water was due to the transfer of the molecular chirality to the assemblies whereas that from the CyD subphase was due to the inclusion of azobenzene into the chiral cavity. Interestingly, the film from the water surface was photoinactive, whereas a reversible optical and chiroptical switch could be obtained for the film from the α-CyD subphase. The work provided a way to regulate the assembly and functions of organized molecular films by taking advantage of the interfacial host-guest reaction.     

Compression induced helical nanotubes in a spreading film of a bolaamphiphile at the air/water interface

Inspired by the elegant helical structures endowed by mother nature, we designed an L-glutamic acid terminated bolaamphiphile and obtained helical nanotubes through the manipulation on the two-dimensional Langmuir films at the air/water interface. It has been found that on the subphase with a pH value lower than 3, stable monolayers with plateau regions were obtained for the bolaamphiphile. Although a flat and uniform morphology was observed for the film deposited at a surface pressure below the plateau region, helical nanotube structures were obtained when the film was compressed over the plateau region. It was suggested that the compression of the monolayer at the air/water interface caused the one end of the bolaamphiphile to leave from the water surface and form an intermediate monolayer in which one end group attached on the water surface and the other extruded in the air. Such an intermediate monolayer subsequently rolled into a helical structure due to the chiral nature of the L-glutamic acid headgroup.     

Fabrication of chiral Langmuir-Schaefer films of achiral amphiphilic Schiff base derivatives through an interfacial organization

Supramolecular chirality in the Langmuir-Schaefer (LS) films of two achiral amphiphilic Schiff bases, 2-(2'-benzimidazolyliminomethyl)-4-octadecyloxyphenol (BSC18) and 2-(2'-benzthiazolyliminomethyl)-4-octadecyloxyphenol (TSC18), was investigated. Both of these amphiphiles could form LS films from the water surface or coordinate with Ag(I) in the subphase to form Ag(I)-coordinated LS films. Although both of these amphiphiles were achiral, TSC18 formed a chiral LS film from the water surface, while BSC18 formed a chiral Ag(I)-coordinated LS film from the aqueous AgNO3 subphase. The supramolecular chirality in these LS films was suggested to be due to a cooperative stereoregular pi-pi stacking of the functional groups together with the long alkyl chains in a helical sense. The relationship between the chirality of the LS films and the molecular structures of TSC18 and BSC18 as well as their H-bond or coordination behaviors was discussed. The Schiff base films showed a reversible color change upon exposure to HCl and NH3 gas alternatively; however, the supramolecular chirality was irreversible during these processes.     

Controllable growth of straight nanorods and nanowires in the Langmuir films of a bolaamphiphilic par derivative.

A novel bolaamphiphilic compound, 1, 10-bis[3'-hydroxy-4'-(2'-pyridylazo)phenoloxy] decane [(PAR)2C10], was synthesized and its spreading film and in situ coordination with metal ions in the Langmuir monolayer at the air/water interface were investigated. It was found that (PAR)2C10 could be spread on the water surface, and the Langmuir film showed a phase transition from a flat conformation to a U-shaped conformation upon compression. Interfacial coordination between (PAR)2C10 and metal ions could occur in situ in the Langmuir monolayer. Depending on the concentration of the subphase, different coordination modes were observed. A 2:1 (ligand-PAR-to-metal-ion) complex was formed at a lower concentration of the subphase, while a 1:1 complex was obtained on the subphase with a higher concentration of the salt. Interestingly, very straight nanowires, extending to several micrometers, were observed in the AFM images of the films transferred from the subphase containing CuCl2 in higher concentrations. However, tortuous nanowires were observed under the subphase containing Cu(CH3COO)2. The formation of such kind of wire-like structures was only observed for the combination of the bolaamphiphilic PAR derivative with the Cu(II) ions. Other metal ions or the single-chain PAR derivative did not show this behavior. A possible growth mechanism of the nanowires was proposed based on the coordination of the bolaamphiphilic (PAR)2C10 with the Cu(II) ions as well as with the counteranions.     

TPPS和Gemini表面活性剂的复合膜及其手性的研究

研究了一种新的gemini表面活性剂(C12H24-α,ω-(C12H25N＋(CH3)2Br－)2, （简写为C12-C12-C12）和TPPS在气液界面上形成的复合膜及其手性.实验发现,单独C12-C12-C12不能在纯水表面形成稳定的单分子膜，但当亚相中存在TPPS时，可形成稳定的单分子膜.通过水平提拉法将复合膜转移到固体基板上，发现在适当的pH值条件下，TPPS可在复合膜中形成J-聚集体，并且发现，尽管Gemini表面活性剂和TPPS 都 是非手性的，TPPS的J-聚集体表现出强烈的Cotton效应.另外，gemini表面活性剂的两个正电荷中心对TPPS的J-聚集体的手性并不能表现出协同效应.     

Chiral assemblies of achiral rigid-flexible molecules at the air/water interface induced by silver(I) coordination

Chiral films are obtained from achiral rigid-flexible molecules. Due to hydrogen bonding and steric constraints, these molecules can self-assemble into chiral assemblies at the air/water interface upon compression. When the molecules are spread on a subphase containing AgNO(3), they form a stable monolayer through coordination with Ag(I) ions, as confirmed by surface pressure-area isotherms, UV/Vis and FTIR spectroscopy, and AFM. More interestingly, macroscopic chirality was detected in the Ag(I)-coordinated films by circular dichroism measurements. The formation mechanisms of the two kinds of chiral films are briefly discussed.     

Amphiphilic siloxane phosphonate macromolecule monolayers at the air/water interface: effects of structure and temperature

A comprehensive study is reported of Langmuir-Blodgett (LB) films (spread at the air/water interface using the Langmuir balance technique) composed of surface active, nonionic, and OH-free amphiphilic siloxane phosphonate ester macromolecules. Analysis is made on three molecular structures in the form of linear polymer poly(diethylphosphono-benzyl-alphabeta-ethyl methylsiloxane) (PPEMS), cyclic oligomer methylphosphonobenzyl-alphabeta-ethyl cyclosiloxane (MPECS), and copolymer poly(PEMS-co-DMS). The surface pressure-surface area (pi -A) isotherms of homopolymer at 3-40 degrees C show a clear temperature-induced phase transition (plateaus at pit approximately 17-19 mN/m) below 10 degrees C. The magnitude of the transition substantially increases upon lowering the temperature (partial differential DeltaAt/ partial differential T approximately -0.1 nm2 unit(-1) deg(-1) and partial differential pi t / partial differential T approximately -0.25 mN m(-1) deg(-1)). The positive entropy and enthalpy gain infers that strong coupling with the subphase and excess hydration attributed to hydrogen bonding between the P=O bond and the subphase prevails at low temperatures. The cyclic oligomer MPECS forms a condensed monolayer at the air/water interface that does not display a similar transition in the experimental temperature range. The temperature sensitivity of MPECS film is observed only in the collapsed region. The nature of the interaction with the subphase is similar for MPECS and PPEMS, indicating that the size and thermal mobility are the controlling factors in these processes. The elasticity plot reveals two distinct states (above and below transition). This observation is supported by BAM images that show irregular spiral structures below 10 degrees C. The transition occurring in the copolymer at 20 degrees C is due to relaxation of the PDMS component. The two maxima shown in the elasticity plot indicate additive fractions of PPEMS and PDMS. The surface areas of these macromolecules in the relaxed (1.48 nm2/unit) and packed (0.45 nm2/unit) forms obtained by PM3 modeling agree well with the experimental data and seem to indicate that the siloxane chain is being lifted off the subphase by the hydrophobic phenylic part of the molecule.     

Self-assembled spiral nanoarchitecture and supramolecular chirality in Langmuir-Blodgett films of an achiral amphiphilic barbituric acid

An amphiphilic barbituric acid derivative was found to form stable monolayers showing a clear phase transition at the air/water interface. It is interesting to find that the deposited Langmuir-Blodgett (LB) films of the compound showed circular dichroism (CD) although the molecule itself was achiral. AFM measurements on the transferred one-layer LB film revealed that spiral nanoarchitectures were formed. It was further found that the supramolecular chirality of the LB films was related to symmetry breaking at the interface. Hydrogen bonding and the pi-pi stacking between the neighboring molecules resulted in chiral fibers which formed the spiral structures. To the best of our knowledge, this is the first report on the chirality of the molecular assemblies and spiral nanostructures formed through the air/water interface by achiral molecules.     

Influence of Poly(ethylenimine) on the Monolayer of Oleic Acid at the Air/Water Interface

The effect of poly(ethylenimine) (PEI) dissolved in water on the surface pressure-area isotherm of oleic acid (OA) at the air/water interface was investigated. On a concentrated PEI solution, the isotherm of the OA monolayers exhibited a noticeable difference as a function of subphase pH. PEI caused the collapse pressure of the OA monolayer to increase up to 45 mN/m, due to a stronger acid-base-type interaction occurring between the amine group of the PEI and the carboxyl group of OA; on a pure water subphase, the collapse pressure was;28 mN/m. On the other hand, owing to a stronger OA-PEI interaction, the OA monolayers favored a liquid-expanded state more on the PEI-containing water subphase than on the pure water. From the QCM measurement, each OA molecule appeared to interact, on average, with 4.3-5.8 ethylenimine repeating units at basic pHs. We also found that OA multilayers could be assembled on a hydrophilic substrate by a Z-type Langmuir-Blodgett (LB) deposition in a PEI-containing subphase at basic pHs. The ATR-IR spectral data revealed that, in a Z-type LB film, the headgroup of OA was mostly present as carboxylate, interacting in an ionic state with the protonated amine groups of PEI. In acidic conditions, neither a Y-type nor a Z-type deposition was really accomplished. Nonetheless, the ATR-IR spectral data suggested that OA molecules should exist in a monomeric state in a LB film assembled at acidic pHs without PEI while they would form intermolecular hydrogen bridges and/or dimers in the presence of PEI. Copyright 2000 Academic Press.     

A study of macroderm a and macroderm L monolayers and their two-dimensional compatibility

 Spread monolayers of two new skin permeation enhancers, MacroDerm A and MacroDerm L were investigated at the water/air interface as a function of temperature and of subphase composition. Both components did not seem to be markedly affected by changes in ionic strength and by the presence of metal ions in the subphase. The two-dimensional binary system MacroDerm A –MacroDerm L was also studied at the water/air interface at 298 K on pure water subphase. The behavior of surface areas, surface compressional moduli and collapse pressure as a function of molar ratios of components shows that MacroDerm A and MacroDerm L are miscible. Received: 17 December 1996 Accepted: 5 March 1997