A new method of quantification of pipemidic-acid by capillary zone electrophoresis with end-column amperometric detection

Capillary zone electrophoresis was employed for the determination of pipemidic acid using an end-column amperometric detection with a carbon fiber microdisk array electrode, at a constant potential of -1.10 V vs. saturated calomel electrode. The optimum conditions of separation and detection were 1.2 x 10(-4) mol/LNaOAc - 8.8 x 10(-4) mol/ LHOAc for the buffer solution, 20 kV for the separation voltage, 5 kV and 10 s for the injection voltage and the injection time. The limit of detection was 1.05 x 10(-7) mol/L or 189 amol (S/N=3). The relative standard deviation was 0.31% for the migration time and 2.0% for the electrophoretic peak current. The method was applied to determining pipemidic acid in human serum.     

Determination of clozapine by capillary zone electrophoresis following end-column amperometric detection with simplified capillary/electrode alignment

Capillary zone electrophoresis was employed for the determination of clozapine using an end-column amperometric detection at a carbon fiber array microdisk electrode with simplified capillary/electrode alignment. The optimum conditions of separation and detection are: Britton-Robinson buffer, pH 2.0 (1.3 x 10(-2) mol/L total concentration of acids, 3.2 x 10(-3) mol/L NaOH), 15 kV for separation voltage, 5 kV and 10 s for injection voltage and injection time, respectively. The limit of detection is 4.2 x 10(-7) mol/L or 1.2 fmole (signal to noise, S/N = 2). The relative standard deviation is 1.4% for the migration time and 2.5% for the electrophoretic peak current. The method was applied to the determination of clozapine in human blood. The recovery of the method is between 94-104%.     

Direct electrochemical determination of pyruvate in human sweat by capillary zone electrophoresis.

Capillary zone electrophoresis was employed for the determination of pyruvate in human sweat using electrochemical detection with a carbon fiber microdisk bundle electrode at a constant potential of 1.60 V vs. saturated calomel electrode. The optimum separation conditions are 3.6 x 10(-3) mol/L Na2HPO4-1.4 x 10(-3) mol/L NaH2PO4 (pH 7.2) for the buffer solution, and 18 kV for the separation voltage. The limits of detection of pyruvate are 8.0 x 10(-6) mol/L or 24 fmol (S/N = 3) for the injection voltage of 6 kV and the injection time of 10 s. The relative standard deviation is 2.0% for the migration time and 5.7% for the electrophoretic peak current. The method was applied to determining pyruvate in human sweat.     

Monitoring myoglobin by capillary zone electrophoresis with end-column amperometric detection

Capillary zone electrophoresis was employed for the determination of myoglobin in human urine using end-column amperometric detection with a carbon fiber microelectrode at a constant potential of 1.80 V vs. saturated calomel electrode (SCF). The optimum conditions of separation and detection are: 3.73 x 10-4 mol/L sodium diethyl malonyl urea (barbitone sodium), 1.34 x 10-4 mol/L HCl for the buffer solution, 20 kV for separation voltage, 5 kV and 5 s for injection voltage and injection time, respectively. The limit of detection is 4.4 x 10-8 mol/L or 84 amole signal to noise (S/N = 2). The relative standard deviation is 2.9% for the migration time and 2.5% for the electrophoretic peak current. The method can be used for the determination of myoglobin in human urine. The samples can be directly injected and need no pretreatment. The method is also rapid, less than 2 min, and has a recovery rate of 94-106%.     

Determination of diclofenac sodium by capillary zone electrophoresis with electrochemical detection

Capillary zone electrophoresis was employed for the determination of diclofenac sodium using an end-column amperometric detection with a carbon fiber microelectrode, at a constant potential of 0.83 V vs. saturated calomel electrode. The optimum conditions of separation and detection are 4.90 x 10(-3) mol/l Na2HPO4-3.10 x 10(-3) mol/l NaH2PO4 (pH 7.0) for the buffer solution, 10 kV for the separation voltage, 5 kV and 10 s for the injection voltage and the injection time, respectively. The limit of detection is 2.5 x 10(-6) mol/l or 5.2 fmol (S/N=2). The relative standard deviation is 0.8% for the migration time and 4.7% for the electrophoretic peak current. The method was applied to the determination of diclofenac sodium in human urine.     

Quantitative assay of metronidazole by capillary zone electrophoresis with amperometric detection at a gold microelectrode

Capillary zone electrophoresis was employed for the determination of metronidazole using end-column amperometric detection with a gold microelectrode at a constant potential of -0.52V vs. saturated calomel electrode. To overcome interference of oxygen in the solution, a deaeration injector and a deaeration protector at the detection cell were used. The optimum conditions of separation and detection are 1.0 x 10(-3) mol/L potassium dihydrogen citrate (KH2C6H5O7) for the buffer solution, 20 kV for the separation voltage, and 5 kV and 10 S for injection voltage and injection time, respectively. The limit of detection is 6.0 x 10(7) mol/L or 0.78 fmole (S/N = 3). The relative standard deviation is 3.9% for the electrophoretic peak current. The method was applied to the determination of metronidazole in human urine.     

Determination of idarubicin in human urine by capillary zone electrophoresis with amperometric detection

A simple, reliable and reproducible method, based on capillary zone electrophoresis with amperometric detection, has been developed for the determination of idarubicin in human urine. A carbon disk electrode was used as working electrode. The optimal conditions of separation and detection were pH 5.6 phosphate buffer (0.20 mol/L), 22 kV for the separation voltage and 1.00 V (vs. Ag/AgCl, 3 mol/L KCl) for the detection potential. The linear range was from 4.0 x 10(-7) to 2.0 x 10(-5) mol/L with a regression coefficient of 0.9986, and the detection limit was 8.0 x 10(-8) mol/L. The method was directly applied to the determination of idarubicin in spiked human urine without any other sample pretreatment except filtration, and the assay results were satisfactory.     

Quantitation of caffeine by capillary zone electrophoresis with end-column amperometric detection at a carbon microdisk array electrode

Capillary zone electrophoresis is employed for the determination of caffeine using end-column amperometric detection with a carbon fiber microdisk array electrode at a constant potential of 1.45 V versus a saturated calomel electrode. The optimum conditions of separation and detection are 0.1 52mM NaH2PO4-0.648mM Na2HPO4 for the buffer solution, 20 kV for the separation voltage, 5 kV for the injection voltage, and 10s for the injection time. The limit of detection is 2.9 x 10(-4)mM or 1.2 fmol (signal-to-noise ratio = 2). The relative standard deviation is 0.68% for the migration time and 2.3% for the electrophoretic peak current. The method is applied to determining caffeine in human serum and a cola drink.     

Monitoring diclofenac sodium in single human erythrocytes introduced by electroporation using capillary zone electrophoresis with electrochemical detection.

A method for determination of the drug diclofenac sodium introduced into individual human erythrocytes by electroporation using capillary zone electrophoresis with electrochemical detection at a carbon fiber array microelectrode was developed. In this method, the whole cell was injected into the separation capillary by electromigration. Cell lysis was accomplished by injecting a plug of the separation buffer (1.25 x 10(-2) mol/L Na2B4O7-3.13 x 10(-3) mol/L NaOH). The optimum conditions of separation and detection were 20 kV for the separation voltage and 1.0 V for the detection potential. The concentration of diclofenac sodium in the single cells was quantified by a calibration curve. The mean concentration of diclofenac sodium introduced into the cell was 4.21 micromol/L. The relative standard deviation of the concentration of diclofenac sodium introduced into ten cells is 10%.     

Determination of histamine by capillary zone electrophoresis with amperometric detection.

Capillary zone electrophoresis was employed for the determination of histamine using end-column amperometric detection with a carbon fiber microelectrode, at a constant potential. The optimum conditions of separation and detection were 10 mmol/L phosphate buffer, pH 5.6 for the buffer solution, 15 kV for the separation voltage, and 1.35 V (versus SCE) for the detection potential. The linear range was from 6.3 x 10(-7) to 1.5 x 1(-5) mol/L with the regression coefficient of 0.9997, and the detection limit was 4.0 x 10(-7) mol/L (S/N = 3). The proposed method was successfully applied to the direct determination of histamine in the beer samples without any sample clean-up procedures.     

Direct determination of amino acids by pressurized capillary electrochromatography with chemiluminescence detection

A pressurized CEC (pCEC) coupled with on-column chemiluminescence (CL) detection was developed for direct determination of amino acids, which was based on the principle of an enhanced effect of Cu(II)-amino acid complexes on the CL reaction between luminol and hydrogen peroxide in alkaline solution. The effects of some important factors on pCEC separation and CL intensity were systemically investigated. Baseline separation of amino acids including L-histidine (L-His), L-threonine (L-Thr), and L-tyrosine (L-Tyr) was achieved by using a monolithic column with a mobile phase of 5.0x10(-3) mol/L phosphate buffer at pH 8.0 that contained 25% v/v methanol and 5.0x10(-4) mol/L luminol and 1.0x10(-5) mol/L Cu(II) at an applied voltage of -5 kV. The calibration curves of the analytes by plotting the peak height against corresponding concentration were linear over the range of 3.2x10(-6)-3.2x10(-4) mol/L for L-His, 4.1x10(-6)-4.1x10(-4) mol/L for L-Thr, and 6.0x10(-7)-3.0x10(-4) mol/L for L-Tyr. The LODs for L-His, L-Thr, and L-Tyr were 6.4x10(-7), 8.4x10(-7), and 3.0x10(-7) mol/L (S/N = 2), respectively. The proposed method was applied to the analysis of amino acid injection sample with satisfactory results. Mean recoveries for three amino acids were from 84.3 to 89.6%.     

Analysis of amino acids by capillary zone electrophoresis with electrochemical detection

The precapillary derivatization of 20 amino acids with naphthalene-2,3-dicarboxaldehyde (NDA) and CN(-) was investigated. All these derivatized amino acids could be oxidized on the carbon fiber microdisk bundle electrode except proline. Capillary zone electrophoresis with electrochemical detection was employed for the analysis of 19 amino acids. The optimum conditions of separation and detection were borate, pH 9.48, for the electrolyte, 18 kV for the separation voltage and 1.15 V versus a saturated calomel electrode for the detection potential. Limits of detection of concentration or mass for individual amino acids were between 1.7 x 10(-7) and 1.8 x 10(-6) mol/L or 84 and 893 amol (according to the signal-to-noise ratio of 3) for the injection voltage of 6 kV and injection time of 10 s. The relative standard deviations were between 0.80 and 2.3% for the migration times and 1.4 and 6.4% for the electrophoretic peak currents. From a mixture of 19 amino acids, 10 amino acids (Arg, Lys, Orn, Try, Ser, Ala, Gly, Cys, Glu, Asp) could be well separated. The other 9 amino acids appeared on three electrophoretic peaks. From the samples, in which the nine amino acids do not exist simultaneously, some of them could also be detected. The method was applied to the determination of amino acids in beer by the standard addition method. The recovery for the amino acids in beer was 91-109%.     

毛细管电泳-场强放大样品堆积法检测染发剂中的7种苯胺类物质

建立了毛细管电泳-场强放大样品堆积测定染发剂中4,4′-二氨基二苯甲烷、苯胺、邻甲氧基苯胺、对氨基苯甲醚、3,4-二甲基苯胺、间氨基苯酚、1-萘胺7种苯胺类物质的分析方法。在优化的缓冲溶液体系(0.15 mol/L NaH2PO4,0.015 mol/L 三乙醇胺, pH 2.3)下7种分析物在6.5 min内实现基线分离。考察了样品中添加的磷酸浓度和乙腈浓度、水柱长度、电动进样时间与电压对场强放大富集效率及重现性的影响。最佳的富集条件为: 水柱注入3.45 kPa(0.5 psi)×6 s,样品中添加40%(v/v)乙腈和0.6×10~3mol/L磷酸,进样电压与进样时间为10 kV×10 s。线性范围为3～1000 μg/L(R2＞0.996),检出限为0.26～2.75 μg/L,将已有方法的检测灵敏度提高了1～3个数量级。在2种市售黑色染发剂中均检测到间氨基苯酚,含量分别为7.32 mg/g和1.34 mg/g。平均加标回收率为74%～108%。该方法灵敏度高、快速、重现性好、成本低,可供多种样品基质中痕量苯胺类污染物及其他阳离子物质的测定借鉴使用。     

四种阴离子的毛细管电泳电导检测(英文)

 采用柠檬酸 柠檬酸钠作为缓冲体系 ,使用负高压 ,对Cl-,NO3 -,HCO3 -和H2 PO4 -等 4种常见阴离子进行了分离检测 ,研究了缓冲剂的种类、浓度、pH值及操作电压对分离的影响。在选定的条件下 ,4种离子的定量线性范围 :Cl-5 0× 10 -5mol/L～ 2 5× 10 -3 mol/L ,NO3 -6 0× 10 -5mol/L～ 2 0× 10 -3 mol/L ,HCO3 -5 0× 10 -6mol/L～ 2 0× 10 -4 mol/L ,H2 PO4 -6 0× 10 -5mol/L～ 1 0× 10 -3 mol/L ;检出限 :Cl-1 5× 10 -5mol/L ,NO3 -3 0×10 -5mol/L ,HCO3 -1 0× 10 -6mol/L ,H2 PO4 -2 0× 10 -5mol/L ;峰面积的RSD (n =6 ) :Cl-3 1% ,     

Determination of antioxidants in cosmetics by micellar electrokinetic capillary chromatography with electrochemical detection

A new and efficient method for the determination of antioxidants [Propyl gallate (PG), tert-butylhydroquinone (TBHQ), butylated hydroxyanisole (BHA), and butylated hydroxytoluene (BHT)] in cosmetics has been established by using micellar electrokinetic capillary chromatography with electrochemical detection (MECC-ED). Under the optimum conditions of the method, all analytes were successfully separated within 13 min at the separation voltage of 18 kV in a 20 mmol/L borate running buffer (pH 7.4) containing 25 mmol/L sodium dodecyl sulfate. The excellent linearity was obtained in the concentration range from 5.0 x 10(-4) to 2.0 x 10(-6) mol/L and the detection limits (S/N = 3) of PG, TBHQ, BHA, and BHT range from 3 x 10(-7) to 3 x 10(-6) mol/L.     

磺胺类人工合成甜味剂的毛细管电泳/电导法分离检测

采用15 mmol/L Tris-10 mmol/L H3BO3-0.2 mmol/L EDTA为电泳运行液,0.2%四乙烯五胺为电渗流抑制剂,融硅石英毛细管(45 cm×50 μm),负高压分离(-15 kV),柱端接触式电导检测,建立了磺胺类人工合成甜味剂(糖精钠、安赛蜜、甜蜜素)的高效毛细管电泳/电导法分离检测方法.糖精钠、安赛蜜、甜蜜素的线性检测范围分别为0.8 ～120、1.1 ～120、1.5 ～120 μmol/L,检出限分别为0.3、0.4、0.6 μmol/L.详细讨论了电泳运行液的组成、浓度以及进样方式对灵敏度和分离度的影响.该法用于市售饮料中3种甜味剂的分离检测,结果满意.     

毛细管电泳法同时测定血清中的左旋多巴和甲基多巴

建立了毛细管电泳-紫外检测同时测定血清中左旋多巴和甲基多巴的方法。以40 mmol/L硼砂（pH 9.5）为分离缓 冲溶液,在3.45 kPa（0.5 psi）压力下进样7 s、分离电压22 kV、检测波长200 nm、温度25 ℃的条件下进行测定,两 种物质获得了较好的分离。甲基多巴和左旋多巴分别为1.0~64.0 mg/L和1.0~71.0 mg/L时与峰面积呈良好的线性关系, 线性相关系数分别为0.9998和0.9994,检出限分别为0.6和0.8 mg/L(以信噪比为3计)。将该法用于血清中甲基多巴和左 旋多巴的测定,回收率为82.8%~88.8%,相对标准偏差为2.10%~2.63%。     

胶束电动毛细管色谱安培检测中药马齿苋中多巴胺和去甲肾上腺素

建立了胶束电动毛细管色谱结合电化学安培检测同时分析中药马齿苋中多巴胺和去甲肾上腺素的方法。考察了缓冲液的浓度、pH值、十二烷基硫酸钠(SDS)浓度以及工作电极电势对分离检测的影响。在优化的条件下,多巴胺和去甲肾上腺素在1.0×10-6～5 0×10-4mol/L范围内有良好线性,浓度检测限(S/N=3)分别为8 7×10-7mol/L和4 2×10-7mol/L,质量检测限分别为1 45fmol和0 41fmol。该方法组分定性可靠,不需要衍生处理,选择性好。将该法应用于中药马齿苋样品的分析,获得了较好的结果。     

Determination of Nicotine in Tobacco by Capillary Electrophoresis with Electrochemical Detection

A sensitive, simple and low-cost method based on capillary electrophoresis(CE) with electrochemical(EC) detection at a carbon fiber microdisk electrode(CFE) was developed for the determination of nicotine. Effects of detection potential, concentration and pH value of the phosphate buffer, and injection time as well as separation voltage were investigated. Under the optimized conditions: a detection potential of 1.20 V, 40 mmol/L phosphate buffer(pH 2.0), a sample injection time of 10 s at 10 kV and a separation voltage of 16 kV, the linear range obtained was from 5.0×10^-7 mol/L to 1.0×10^-4 mol/L with a correlation coefficient of 0.9989 and the limit of detection(LOD, S/N=3) obtained was 5.0×10^-8 mol/L. The method was also used to determine the nicotine in cigarettes. Nicotine amount ranged from 0.211 mg/g to 0.583 mg/g in the pipe tobacco of seven brands of cigarette and the amount in one cigarette varied from 0.136 mg/cigarette to 0.428 mg/cigarette.     

毛细管电泳-安培检测法用于7-甲基鸟苷与丝裂霉素C分离检测的研究

建立了一种同时分离检测7-甲基鸟苷与丝裂霉素C的毛细管电泳-安培检测方法。在950 mV电极(工作电极:0.3 mm微型石墨圆盘电极;参比电极:Ag/AgCl;辅助电极:Pt丝)电位下,于20 mmol/L的磷酸盐缓冲体系(pH 9.4)中,采用18 kV的分离电压进行分离。在最佳条件下,7-甲基鸟苷与丝裂霉素C在10 min内实现分离,7-甲基鸟苷与丝裂霉素C的线性范围均为0.50~50 mg/L,检测限分别为0.050 mg/L与0.025 mg/L。将该方法用于模拟尿样和模拟兔血清样的检测,7-甲基鸟苷与丝裂霉素C的回收率为93.0%～97.2%,结果令人满意。