Determination of clozapine by capillary zone electrophoresis following end-column amperometric detection with simplified capillary/electrode alignment

Capillary zone electrophoresis was employed for the determination of clozapine using an end-column amperometric detection at a carbon fiber array microdisk electrode with simplified capillary/electrode alignment. The optimum conditions of separation and detection are: Britton-Robinson buffer, pH 2.0 (1.3 x 10(-2) mol/L total concentration of acids, 3.2 x 10(-3) mol/L NaOH), 15 kV for separation voltage, 5 kV and 10 s for injection voltage and injection time, respectively. The limit of detection is 4.2 x 10(-7) mol/L or 1.2 fmole (signal to noise, S/N = 2). The relative standard deviation is 1.4% for the migration time and 2.5% for the electrophoretic peak current. The method was applied to the determination of clozapine in human blood. The recovery of the method is between 94-104%.     

A new method of quantification of pipemidic-acid by capillary zone electrophoresis with end-column amperometric detection

Capillary zone electrophoresis was employed for the determination of pipemidic acid using an end-column amperometric detection with a carbon fiber microdisk array electrode, at a constant potential of -1.10 V vs. saturated calomel electrode. The optimum conditions of separation and detection were 1.2 x 10(-4) mol/LNaOAc - 8.8 x 10(-4) mol/ LHOAc for the buffer solution, 20 kV for the separation voltage, 5 kV and 10 s for the injection voltage and the injection time. The limit of detection was 1.05 x 10(-7) mol/L or 189 amol (S/N=3). The relative standard deviation was 0.31% for the migration time and 2.0% for the electrophoretic peak current. The method was applied to determining pipemidic acid in human serum.     

Direct electrochemical determination of pyruvate in human sweat by capillary zone electrophoresis.

Capillary zone electrophoresis was employed for the determination of pyruvate in human sweat using electrochemical detection with a carbon fiber microdisk bundle electrode at a constant potential of 1.60 V vs. saturated calomel electrode. The optimum separation conditions are 3.6 x 10(-3) mol/L Na2HPO4-1.4 x 10(-3) mol/L NaH2PO4 (pH 7.2) for the buffer solution, and 18 kV for the separation voltage. The limits of detection of pyruvate are 8.0 x 10(-6) mol/L or 24 fmol (S/N = 3) for the injection voltage of 6 kV and the injection time of 10 s. The relative standard deviation is 2.0% for the migration time and 5.7% for the electrophoretic peak current. The method was applied to determining pyruvate in human sweat.     

Determination of diclofenac sodium by capillary zone electrophoresis with electrochemical detection

Capillary zone electrophoresis was employed for the determination of diclofenac sodium using an end-column amperometric detection with a carbon fiber microelectrode, at a constant potential of 0.83 V vs. saturated calomel electrode. The optimum conditions of separation and detection are 4.90 x 10(-3) mol/l Na2HPO4-3.10 x 10(-3) mol/l NaH2PO4 (pH 7.0) for the buffer solution, 10 kV for the separation voltage, 5 kV and 10 s for the injection voltage and the injection time, respectively. The limit of detection is 2.5 x 10(-6) mol/l or 5.2 fmol (S/N=2). The relative standard deviation is 0.8% for the migration time and 4.7% for the electrophoretic peak current. The method was applied to the determination of diclofenac sodium in human urine.     

Monitoring human serum transferrin by capillary zone electrophoresis with end-column amperometric detection

Capillary zone electrophoresis was employed for the determination of human serum transferrin using end-column amperometric detection with a carbon fiber microelectrode at a constant potential of 1.9 V vs. saturated calomel electrode (SCE). The optimum conditions of separation and detection are 7.5 x 10(-4) mol/L Tris-3.44 x 10(-4) mol/L HCl for the buffer solution, 20 kV for the separation voltage, 5 kV and 10 s for the injection voltage and the injection time, respectively. The limit of detection is 6.7 x 10(-8) mol/L or 440 amol (S/N = 2). The relative standard deviations are 0.67% for the migration time and 1.5% for the electrophoretic peak current. The method was applied to the determination of transferrin in human serum. The recovery is between 93-104%.     

Quantitation of caffeine by capillary zone electrophoresis with end-column amperometric detection at a carbon microdisk array electrode

Capillary zone electrophoresis is employed for the determination of caffeine using end-column amperometric detection with a carbon fiber microdisk array electrode at a constant potential of 1.45 V versus a saturated calomel electrode. The optimum conditions of separation and detection are 0.1 52mM NaH2PO4-0.648mM Na2HPO4 for the buffer solution, 20 kV for the separation voltage, 5 kV for the injection voltage, and 10s for the injection time. The limit of detection is 2.9 x 10(-4)mM or 1.2 fmol (signal-to-noise ratio = 2). The relative standard deviation is 0.68% for the migration time and 2.3% for the electrophoretic peak current. The method is applied to determining caffeine in human serum and a cola drink.     

Quantitative assay of metronidazole by capillary zone electrophoresis with amperometric detection at a gold microelectrode

Capillary zone electrophoresis was employed for the determination of metronidazole using end-column amperometric detection with a gold microelectrode at a constant potential of -0.52V vs. saturated calomel electrode. To overcome interference of oxygen in the solution, a deaeration injector and a deaeration protector at the detection cell were used. The optimum conditions of separation and detection are 1.0 x 10(-3) mol/L potassium dihydrogen citrate (KH2C6H5O7) for the buffer solution, 20 kV for the separation voltage, and 5 kV and 10 S for injection voltage and injection time, respectively. The limit of detection is 6.0 x 10(7) mol/L or 0.78 fmole (S/N = 3). The relative standard deviation is 3.9% for the electrophoretic peak current. The method was applied to the determination of metronidazole in human urine.     

Capillary electrochromatographic analysis of aliphatic mono- and polycarboxylic acids

The parameters influencing the electrochromatographic separation of aliphatic organic acids in a capillary column with a wall-coated macrocyclic polyamine have been studied. Indirect detection using chromate, pyromellitate, trimellitate, o-phthalate, benzoate and acetate as background electrolytes has been tested. A complete separation of polyprotic acids could be achieved with pyromellitate buffer (7.5 mM, pH 6.5), and satisfactory results for the simultaneous separation of monoprotic acids and polyprotic acids were found using a capillary column of 70 cm (50 cm effective length)x75 microm inner diameter, electrokinetic injection (-10 kV, 10 s), benzoate buffer (6 mM, pH 4.6), separation voltage of -10 kV, and detection at 220 nm. For the separation of the geometric isomers fumarate and maleate, acetate buffer was found the best choice among the background electrolytes tested. The method so established has been applied to the determination of organic acids in soy sauce, brandy, lemon juice, spinach juice and cigarette. From the retention behavior, it was found that the separation mechanism on the bonded phase was influenced by the macrocyclic effect, electrostatic attraction, hydrogen bonding, van der Waals forces, and anion exchange, in addition to the differences in electrophoretic mobility.     

Monitoring myoglobin by capillary zone electrophoresis with end-column amperometric detection

Capillary zone electrophoresis was employed for the determination of myoglobin in human urine using end-column amperometric detection with a carbon fiber microelectrode at a constant potential of 1.80 V vs. saturated calomel electrode (SCF). The optimum conditions of separation and detection are: 3.73 x 10-4 mol/L sodium diethyl malonyl urea (barbitone sodium), 1.34 x 10-4 mol/L HCl for the buffer solution, 20 kV for separation voltage, 5 kV and 5 s for injection voltage and injection time, respectively. The limit of detection is 4.4 x 10-8 mol/L or 84 amole signal to noise (S/N = 2). The relative standard deviation is 2.9% for the migration time and 2.5% for the electrophoretic peak current. The method can be used for the determination of myoglobin in human urine. The samples can be directly injected and need no pretreatment. The method is also rapid, less than 2 min, and has a recovery rate of 94-106%.     

Determination of low-molecular-mass organic acids in any type of beer samples by coelectroosmotic capillary electrophoresis

A separation and determination of a mixture of 19 low-molecular-mass organic acids usually present in beer samples was developed using coelectroosmotic capillary zone electrophoresis. A polycation (hexadimetrine bromide, HDB) has been added to the electrolyte, which dynamically coats the inner surface of the capillary and causes a fast anodic electroosmotic flow. The main factors affecting reversal of the EOF such as type of modifier and concentration and influence of organic solvents were studied. Three types of modifiers, two alkylammonium salts (cethyltrimethylammonium bromide and tetradecyltrimethylammonium bromide) and a polycation (HDB) were investigated. The composition of the running buffer results on a 25% 2-propanol, 0.001% HDB and 50 mM sodium phosphate. The different instrumental parameters affecting the capillary electrophoretic separation were also optimized resulting on a -15 kV voltage with a hydrodynamic injection for 7 s with a UV detection at 210 nm. The applicability of the present method has been demonstrated for the determination of organic acids in different beer samples.     

Capillary electrophoresis coupled with electrochemical detection using porous etched joint for determination of antioxidants

Capillary electrophoresis coupled with electrochemical detection (CE-EC) for determination of antioxidants, propyl gallate (PG) and tert-butylhydroquinone (TBHQ), in cosmetic samples was proposed in this work. A porous etched joint was used to isolate the electrochemical detection from the electrophoretic high voltage. Compared with the 25 microm i.d. capillary without a decoupler in a CE-EC system, a 75 microm i.d. capillary applied in the present system gave an improvement in both sample injection and sensitivity. Moreover, the carbon fiber working electrode could be directly in touch with the end of separation capillary due to the elimination of the effect of separation voltage on the EC detection, so the alignment of working electrode and capillary became easy and the dead volume was also decreased. Baseline separation of the two antioxidants was achieved by CE in a 50 cm long x 75 microm i.d. capillary at 20 kV using 5.0 mmol L(-1) phosphate buffer (pH 8.00). 0.7 V (versus Ag/AgCl) was applied to the carbon fiber electrode for electrochemical detection. Under the optimal condition, the precisions (RSD, n=4) of peak height and migration time of PG and TBHQ were 2.39-3.59% and 0.34-0.44%, respectively. The detection limits of PG and TBHQ were 2.51x10(-6) and 4.88 x 10(-6) mol L(-1) for standard solution and 0.0751 and 0.0328 mg g(-1) for the real cosmetic samples with consumption of 0.3g sample. Analysis of TBHQ and PG in cosmetics samples was also achieved with the present system and the spiked recoveries of two analytes in cosmetics samples were in the range of 93.6-98.8%.     

Simultaneous Determination of Carbohydrates and Amino Acids by Capillary Zone Electrophoresis with Constant Potential Amperometric Detection at a Copper Electrode

Capillary zone electrophoresis with end-column amperometric detection at a copper microdisk electrode (100 μm in diameter) was successfully applied for simultaneous determination of carbohydrates and amino acids. Under the separation voltage of 27 kV and the separation electrolyte of 80 mM NaOH in a 75 cm fused silica capillary (10 μm i.d. × 375 μmU o.d.), complete separation of a standard mixture containing 9 carbohydrates and 12 amino acids was achieved in less than 25 min. With the electrokinetical injection of 5.4 s at 27 kV and the detection potential of 0.62 V vs. Ag/AgCl, the detection limits (S/N = 3) were 0.22–0.65 ppm (1.2–1.9 μM) for carbohydrates and 0.31–6.5 ppm (2.3–39 μM) for amino acids, respectively. The calculated numbers of theoretical plates were between 41,000 and 190,000. The use of this method for analysis of carbohydrates and amino acids in a urine sample was demonstrated.     

采用隔离池的毛细管电泳-间接紫外吸收法测定茶叶中的氨基酸

改进的毛细管电泳-间接紫外吸收法采用了自制隔离池,以对氨基苯甲酸(PAB)为背景电解质,对茶叶中的氨基酸进行了测定。PAB能够提高分离效率,降低检出限。隔离池的使用避免了PAB的电极反应,降低了基线噪声,维持了两缓冲液池间的电流导通。研究了背景电解质的浓度、pH值以及电渗流改性剂的种类和浓度对氨基酸分离的影响。在优化的实验条件下,16种氨基酸在14 min内达到了基线分离,峰面积的相对标准偏差小于5%(n=5),检出限为1.7~4.5 μmol/L,回收率为83.0%~106%。该法快速、便捷和灵敏,已成功应用于茶叶中11种游离氨基酸的检测。     

Nafion membrane electrophoresis with direct and simplified end-column pulse electrochemical detection of amino acids

A novel electrophoresis technique, in which the separation column was replaced by a strip of Nafion membrane (5.0 cm x 0.20 mm x 0.25 mm), was developed for the separation of an amino acid mixture (glycine, asparic acid and lysine), followed by quadruple-pulse electrochemical detection. Nafion membrane contains hydrophilic pores (10-20 A and 50-60 A in size) acting as very narrow electrophoresis channels. The fixed-charge sites (-SO(3) (-)) on the hydrophilic pore surface provide a strong charged background. A platinum disk electrode (0.90 mm inner diameter) was employed as the detection electrode and the electrophoresis cathode was used as the quasi-reference and counter electrode for the end-column electrochemical detector, without decoupler. Under optimized conditions the mixture of amino acids could be separated at a voltage of only 90 V with a detection limit of 10(-7) M, indicating that Nafion membrane electrophoresis is a potentially attractive technique for the separation of small organic molecules or ions.     

Direct determination of amino acids by pressurized capillary electrochromatography with chemiluminescence detection

A pressurized CEC (pCEC) coupled with on-column chemiluminescence (CL) detection was developed for direct determination of amino acids, which was based on the principle of an enhanced effect of Cu(II)-amino acid complexes on the CL reaction between luminol and hydrogen peroxide in alkaline solution. The effects of some important factors on pCEC separation and CL intensity were systemically investigated. Baseline separation of amino acids including L-histidine (L-His), L-threonine (L-Thr), and L-tyrosine (L-Tyr) was achieved by using a monolithic column with a mobile phase of 5.0x10(-3) mol/L phosphate buffer at pH 8.0 that contained 25% v/v methanol and 5.0x10(-4) mol/L luminol and 1.0x10(-5) mol/L Cu(II) at an applied voltage of -5 kV. The calibration curves of the analytes by plotting the peak height against corresponding concentration were linear over the range of 3.2x10(-6)-3.2x10(-4) mol/L for L-His, 4.1x10(-6)-4.1x10(-4) mol/L for L-Thr, and 6.0x10(-7)-3.0x10(-4) mol/L for L-Tyr. The LODs for L-His, L-Thr, and L-Tyr were 6.4x10(-7), 8.4x10(-7), and 3.0x10(-7) mol/L (S/N = 2), respectively. The proposed method was applied to the analysis of amino acid injection sample with satisfactory results. Mean recoveries for three amino acids were from 84.3 to 89.6%.     

Determination of histamine by capillary zone electrophoresis with amperometric detection.

Capillary zone electrophoresis was employed for the determination of histamine using end-column amperometric detection with a carbon fiber microelectrode, at a constant potential. The optimum conditions of separation and detection were 10 mmol/L phosphate buffer, pH 5.6 for the buffer solution, 15 kV for the separation voltage, and 1.35 V (versus SCE) for the detection potential. The linear range was from 6.3 x 10(-7) to 1.5 x 1(-5) mol/L with the regression coefficient of 0.9997, and the detection limit was 4.0 x 10(-7) mol/L (S/N = 3). The proposed method was successfully applied to the direct determination of histamine in the beer samples without any sample clean-up procedures.     

Determination of puerarin, daidzein and rutin in Pueraria lobata (Wild.) Ohwi by capillary electrophoresis with electrochemical detection

A method based on capillary electrophoresis with electrochemical detection was developed for the determination of puerarin, daidzein and rutin. Effects of several important factors such as the acidity and concentration of running buffer, separation voltage, injection time, and detection potential were investigated to acquire the optimum conditions. The working electrode was a 300-microm diameter carbon disc electrode positioned opposite the outlet of capillary. The three analytes could be well separated within 12 min in a 40 cm length capillary at a separation voltage of 9 kV in a 50 mmol/l borate buffer (pH 9.0). The relationship between peak currents and analyte concentrations was linear over about three orders of magnitude with detection limits (SIN=3) ranging from 0.241 x 10(-6) to 0.511 x 10(-6) mol/l for all compounds. This proposed method demonstrated long-term stability and reproducibility with relative standard deviations of less than 5% for both migration time and peak current (n=7). It has been successfully applied for the determination of puerarin, daidzein and rutin in Chinese traditional drugs, the vines of Pueraria lobata (Wild.) Ohwi and Puerariae Radix.     

毛细管电泳-间接紫外检测法测定蜂蜜中的氨基酸

采用毛细管电泳-间接紫外检测法同时分离测定蜂蜜中的赖氨酸、色氨酸、谷氨酸等9种氨基酸。考察了磷酸浓度、进样方式和缓冲液pH对分离效率和重现性的影响。在分离电压为-15 kV、检测波长为220 nm条件下,以含有0.5 mmol/L十六烷基三甲基溴化铵、20 mmol/L烟酸、10%甲醇的10 mmol/L磷酸二氢钠缓冲溶液(pH 10.2)为运行缓冲液,9种组分在11 min内达到基线分离;检出限最低可达到0.3 mg/L;线性范围为1.0~1000 mg/L;日间及日内精密度为0.64%~5.83%。实际样品中除甲硫氨酸外的8种氨基酸的加标回收率为60.00%~118.37%。将该方法应用于不同蜜源植物和产地的蜂蜜样品的测定,在市售的5种蜂蜜中均检测到脯氨酸、丝氨酸和天冬氨酸,而只在荔枝蜜中检测到苏氨酸。该方法可以为蜂蜜的蜜源鉴别及质量评估提供借鉴方法。     

Simultaneous determination of pharmacologically active ingredients in Rhodiola by capillary chromatography with electrochemical detection

Rhodiola, in which there are abundant pharmacologically active ingredients, is one of the functional adaptogenic agent that aid specific bodily functions to adapt to the changes and stress of life in addition to being tonic. In an attempt to qualitatively and quantitatively determine the pharmacologically active ingredients in Rhodiola, a new method based on capillary electrophoresis with electrochemical detection (CE-ED) has been developed. The effects of working electrode potential, pH and concentration of running buffer, separation voltage, applied potential and injection time on CE-ED were investigated. Under the optimum conditions, the analytes could be well separated within 24 min at the separation voltage of 18 kV in a 80 mmol L(-1) borax running buffer (pH 9.0). Good linear relationship was established between peak current and concentration of analytes over two orders of magnitude with detection limits (S/N=3) ranged from 3.16 x 10(-7) to 1.11 x 10(-7)g mL(-1) for all target ingredients. This proposed method has been successfully applied for the analysis of real samples, with satisfactory results.     

毛细管电泳-安培检测法用于7-甲基鸟苷与丝裂霉素C分离检测的研究

建立了一种同时分离检测7-甲基鸟苷与丝裂霉素C的毛细管电泳-安培检测方法。在950 mV电极(工作电极:0.3 mm微型石墨圆盘电极;参比电极:Ag/AgCl;辅助电极:Pt丝)电位下,于20 mmol/L的磷酸盐缓冲体系(pH 9.4)中,采用18 kV的分离电压进行分离。在最佳条件下,7-甲基鸟苷与丝裂霉素C在10 min内实现分离,7-甲基鸟苷与丝裂霉素C的线性范围均为0.50~50 mg/L,检测限分别为0.050 mg/L与0.025 mg/L。将该方法用于模拟尿样和模拟兔血清样的检测,7-甲基鸟苷与丝裂霉素C的回收率为93.0%～97.2%,结果令人满意。