Using scanning electrochemical microscopy (SECM) to measure the electron-transfer kinetics of cytochrome c immobilized on a COOH-terminated alkanethiol monolayer on a gold electrode

Cytochrome c was electrostatically immobilized onto a COOH-terminated alkanethiol self-assembled monolayer (SAM) on a gold electrode at ionic strengths of less than 40 mM. Scanning electrochemical microscopy (SECM) was used to simultaneously measure the electron transfer (ET) kinetics of the bimolecular ET between a solution-based redox mediator and the immobilized protein and the tunneling ET between the protein and the underlying gold electrode. Approach curves were recorded with ferrocyanide as a mediator at different coverages of cytochrome c and at different substrate potentials, allowing the measurement of k(BI) = 2 x 10(8) mol(-1) cm3 s(-1) for the bimolecular ET and k degrees = 15 s(-1) for the tunneling ET. The kinetics of ET was also found to depend on the immobilization conditions of cytochrome c: covalent attachment gave slightly slower tunneling ET values, and a mixed CH3/COOH-terminated ML gave faster tunneling ET rates. This is consistent with previous studies and is believed to be related to the degree of mobility of cyt c in its binding configuration and its orientation with respect to the underlying electrode surface.     

Scanning electrochemical microscopy. 59. Effect of defects and structure on electron transfer through self-assembled monolayers

Electron transfer (ET) rate kinetics through n-alkanethiol self-assembled monolayers (SAMs) of alkanethiols of different chain lengths [Me(CH2)nSH; n=8, 10, 11, 15] on Au and Hg surfaces and ferrocene (Fc)-terminated SAMs (poly-norbornylogous and HS(CH2)12CONHCH2Fc) on Au were studied using cyclic voltammetry and scanning electrochemical microscopy (SECM). The SECM results allow determination of the ET kinetics of solution-phase Ru(NH3)63+/2+ through the alkanethiol SAMs on Au and Hg. A model using the potential dependence of the measured rate constants is proposed to compensate for the pinhole contribution. Extrapolated values of koML for Ru(NH3)63+/2+ using the model follow the expected exponential decay (beta is 0.9) for different chain lengths. For a Fc-terminated poly-norbornyl SAM, the standard rate constant of direct tunneling (ko is 189+/-31 s(-1)) is in the same order as the ko value of HS(CH2)12CONHCH2Fc. In blocking and Fc SAMs, the rates of ET are demonstrated to follow Butler-Volmer kinetics with transfer coefficients alpha of 0.5. Lower values of alpha are treated as a result of the pinhole contribution. The normalized rates of ET are 3 orders of magnitude higher for Fc-terminated than for blocking monolayers. Scanning electron microscopy imaging of Pd nanoparticles electrochemically deposited in pinholes of blocking SAMs was used to confirm the presence of pinholes.     

Heterogeneous electron transfer at Au/SAM junctions in a room-temperature ionic liquid under pressure

Proven electrochemical approaches were applied to study heterogeneous electron transfer (ET) between selected redox couples and gold electrodes modified with alkanethiol self-assembled monolayers (SAMs), using the room-temperature ionic liquid (RTIL) [bmim][NTf2] as reaction medium; ferrocene as freely diffusing redox probe in the RTIL was tested for ET through both thin (butanethiol) and thick (dodecanethiol) assemblages at pressures up to 150 MPa; well behaved kinetic patterns and reproducibility of data were demonstrated for ET within the unique Au/SAM/RTIL arrays.     

Electrochemical Investigation of Cytochrome c Immobilized onto Self‐Assembled Monolayer of Captopril

The electrochemical behavior of cytochrome c (cyt‐c) that was electrostatically immobilized onto a self‐assembled monolayer (SAM) of captopril (capt) on a gold electrode has been investigated. Cyclic voltammetry, scanning electrochemical microscopy (SECM) and electrochemical impedance spectroscopy were employed to evaluate the blocking property of the capt SAM. SECM was used to measure the bimolecular electron transfer (ET) kinetics (k_BI) between a solution‐based redox probe and the immobilized protein. In addition, the tunneling ET between the immobilized protein and the underlying gold electrode was calculated. A k_BI value of (5.0±0.6)×10⁸ mol^?1 cm³ s^?1 for the bimolecular ET and a standard tunneling rate constant (k⁰) of 46.4±0.2 s^?1 for the tunneling ET have been obtained.     

Heterogeneous electron-transfer kinetics for ruthenium and ferrocene redox moieties through alkanethiol monolayers on gold

The standard heterogeneous electron-transfer rate constants between substrate gold electrodes and either ferrocene or pentaaminepyridine ruthenium redox couples attached to the electrode surface by various lengths of an alkanethiol bridge as a constituent of a mixed self-assembled monolayer were measured as a function of temperature. The ferrocene was either directly attached to the alkanethiol bridge or attached through an ester (CO(2)) linkage. For long bridge lengths (containing more than 11 methylene groups) the rate constants were measured using either chronoamperometry or cyclic voltammetry; for the shorter bridges, the indirect laser induced temperature jump technique was employed to measure the rate constants. Analysis of the distance (bridge length) dependence of the preexponential factors obtained from an Arrhenius analysis of the rate constant versus temperature data demonstrates a clear limiting behavior at a surprisingly small value of this preexponential factor (much lower than would be expected on the basis of aqueous solvent dynamics). This limit is independent of both the identity of the redox couple and the nature of the linkage of the couple to the bridge, and it is definitely different (smaller) from the limit derived from an equivalent analysis of the rate constant (versus temperature) data for the interfacial electron-transfer reaction through oligophenylenevinylene bridges between gold electrodes and ferrocene. There are a number of possible explanations for this behavior including, for example, the possible effects of bridge conformational flexibility upon the electron-transfer kinetics. Nevertheless, conventional ideas regarding electronic coupling through alkane bridges and solvent dynamics are insufficient to explain the results reported here.     

应用扫描电化学显微镜研究极化液/液界面上的电子转移反应

将含有氧化还原电对的水溶液滴涂在铂盘电极表面, 然后将该电极插入到1,2-二氯乙烷溶液中, 形成稳定的油/水界面. 液滴中的K3Fe(CN)6和K4Fe(CN)6氧化还原电对既可以作为水相中的参比电对参与控制液/液界面上的电势差, 同时又可以作为水相的电子授受体参与界面上的电子转移反应. 结合扫描电化学显微镜电化学系统的特点, 利用其双恒电位仪分别控制界面电势差和现场扫描的优点, 通过扫描电化学显微镜的渐进曲线得到了不同界面电势差控制的电子转移反应速率常数. 实验结果表明, 应用此方法获得的液/液界面可以被外加电位极化, 在一定的电势差范围内, 反应速率常数与界面电势差的关系遵守Butler-Volmer公式.     

Comparative study of electron transfer reactions at the ionic liquid/water and organic/water interfaces

The rates of electron transfer (ET) reactions at the water/ionic liquid (IL) interface have been measured for the first time using scanning electrochemical microscopy. The standard bimolecular rate constant of the interfacial ET between ferrocene dissolved in 1-octyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide and aqueous ferricyanide (0.4 M-1 cm s-1) was found to be approximately 30 times higher than the corresponding rate constant measured at the water/1,2-dichloroethane interface. The driving force dependence of the ET rate was investigated over a wide range of the interfacial potential drop values (>200 mV). The observed Butler-Volmer-type dependence is discussed in terms of the interfacial model. The ET was also probed at the interface between aqueous solution and the mixture of the IL and 1,2-dichloroethane. The mole fractions in this mixture were varied systematically to investigate the transition from the water/organic to the water/IL interface. The observed decrease in the rate constant with increasing mole fraction of 1,2-dichloroethane is in contrast with the previously reported direct correlation between the electrochemical rate constant and the diffusion coefficient of redox species in solution.     

Investigation of the oxidation of hydroquinone at the liquid/liquid interface

<正>The oxidation of hydroquinone(QH_2) was investigated for the first time at liquid/liquid(L/L) interface by scanning electrochemical microscopy(SECM).In this study,electron transfer(ET) from QH_2 in aqueous to ferrocene(Fc) in nitrobenzene (NB) was probed.The apparent heterogeneous rate constants for ET reactions were obtained by fitting the experimental approach curves to the theoretical values.The results showed that the rate constants for oxidation reaction of QH_2 were sensitive to the changes of the driving force,which increased as the driving force increased.In addition,factors that would affect ET of QH_2 were studied.Experimental results indicated ion situation around QH_2 molecule could change the magnitude of the rate constants because the capability of oxidation of QH_2 would be affected by them.     

Scanning electrochemical microscopy determination of organic soluble MPC electron-transfer rates

In this paper, we describe a novel method for measuring the forward heterogeneous electron-transfer rate constant (kf) through the thiol monolayer of gold monolayer protected clusters (MPCs) in solution using scanning electrochemical microscopy (SECM). Applying the equations for mixed mass-transfer and electron-transfer processes, we develop a new formula using only the diffusion coefficient and the tip radius and use it as part of a new method for evaluating SECM approach curves. This method is applied to determine the electron-transfer rates from a series of SECM approach curves for monodisperse hexanethiol MPCs and for polydisperse hexanethiol, octanethiol, decanethiol, dodecanethiol, and 2-phenyethylthiol gold MPCs. Our results show that as the alkanethiol length increases the rate of electron transfer decreases in a manner consistent with the previously proposed tunneling mechanism for the electron transfer in MPCs. However, the effective tunneling coefficient, Beta, is found to be only 0.41 A-1 for alkanethiol passivated MPCs compared to typical values of 1.1 A-1 for alkanethiols as self-assembled monolayers on two-dimensional gold substrates. Similar SECM approach curve results for Pt and Au MPCs indicate that the electron-transfer rate is dependent mostly on the composition of the thiol layer and not on differences in the core metal.     

Interfacial electron-transfer kinetics of ferrocene through oligophenyleneethynylene bridges attached to gold electrodes as constituents of self-assembled monolayers: observation of a nonmonotonic distance dependence

The standard heterogeneous electron-transfer rate constants (k(n)0) between substrate gold electrodes and the ferrocene redox couple attached to the electrode surface by variable lengths of substituted or unsubstituted oligophenyleneethynylene (OPE) bridges as constituents of mixed self-assembled monolayers were measured as a function of temperature. The distance dependences of the unsubstituted OPE standard rate constants and of the preexponential factors (An) obtained from an Arrhenius analysis of the unsubstituted OPE k(n)0 versus temperature data are not monotonic. This surprising result, together with the distance dependence of the substituted OPE preexponential factors, may be assessed in terms of the likely conformational variability of the OPE bridges (as a result of the low intrinsic barrier to rotation of the phenylene rings in these bridges) and the associated sensitivity of the rate of electron transfer (and, hence, the single-molecule conductance which may be estimated using An) through these bridges to the conformation of the bridge. Additionally, the measured standard rate constants were independent of the identity of the diluent component of the mixed monolayer, and using an unsaturated OPE diluent has no effect on the rate of electron transfer through a long-chain alkanethiol bridge. These observations indicate that the diluent does not participate in the electron-transfer event.     

仿生生物膜上多巴胺的电子转移过程研究

利用薄层法(TLCV)研究了硝基苯(NB)/水(W)界面上二茂铁(Fc)-多巴胺(DA)体系的电子迁移(ET)过程,得到该体系界面电子转移速率常数为1.012cm.s^-1.mol^-1.L,界面电子转移反应为单电子过程(n=0.89).采用扫描电化学显微镜(SECM)对同一体系进行研究,得到电子迁移速率常数为(1.10±0.2)cm.s^-1.mol^-1.L,两种方法所得结果吻合,证明了薄层法的可行性.同时,低的反应物浓度比又一次验证了Barker理论.     

SECM study of solute partitioning and electron transfer at the ionic liquid/water interface

Molecular partitioning and electron-transfer kinetics have been studied at the ionic liquid/water (IL/water) interface by scanning electrochemical microscopy (SECM). The ionic liquid C8mimC1C1N is immiscible with water and forms a nonpolarizable interface when in contact with it. Partitioning of ferrocene (Fc) across the IL/water interface was studied by SECM and found to be kinetically fast with a partition coefficient CIL/CW of 2400:1. The partition coefficient value was measured by SECM under quasi-steady-state conditions without waiting for complete solute equilibration. To investigate the kinetics of the electron transfer (ET) between aqueous ferricyanide and Fc dissolved in IL, a new approach to the analysis of the SECM current-distance curves was developed to separate the contributions of Fc partitioning and the ET reaction to the tip current. Several combinations of different aqueous and nonaqueous redox species were investigated; however, only the Fc/Fe(CN)63- system behaved according to the Butler-Volmer formalism over the entire accessible potential range.     

Interfacial reactivity of monolayer-protected clusters studied by scanning electrochemical microscopy

Solutions of monodisperse monolayer-protected clusters (MPCs) of gold can be used as multivalent redox mediators in electrochemical experiments due to their quantized double-layer charging properties. We demonstrate their use in scanning electrochemical microscopy (SECM) experiments wherein the species of interest (up to 2-electron reduction or 4-electron oxidation from the native charge-state of the MPCs) is generated at the tip electrode, providing a simple means to adjust the driving force of the electron transfer (ET). Approach curves to perfectly insulating (Teflon) and conducting (Pt) substrates are obtained. Subsequently, heterogeneous ET between MPCs in 1,2-dichloroethane and an aqueous redox couple (Ce(IV), Fe(CN)63-/4-, Ru(NH3)63+, and Ru(CN)64-) is probed with both feedback and potentiometric mode of SECM operation. Depending on the charge-state of the MPCs, they can accept/donate charge heterogeneously at the liquid-liquid interface. However, this reaction is very slow in contrast to ET involving MPCs at the metal-electrolyte interface.     

A comparison between interfacial electron-transfer rate constants at metallic and graphite electrodes

The Fermi golden rule formalism has been used to derive the rate constant for interfacial electron transfer from a semimetallic electrode, such as highly ordered pyrolytic graphite (HOPG), to a redox couple in solution. A simple expression is presented that semiquantitatively relates the electron-transfer rate constant at a semimetallic electrode to that at a metallic electrode. The approach allows for the estimation of the value of the rate constant for interfacial charge transfer to nonadsorbing outer-sphere redox species at semimetallic electrodes. Rate constants for interfacial electron transfer for a variety of one-electron redox couples at semimetallic electrodes have been calculated relative to the rate constant of the ferrocenium/ferrocene redox couple at a gold electrode. Good agreement is found, in general, between the calculated and observed rate constants.     

Heterogeneous electron transfer kinetics at the ionic liquid/metal interface studied using cyclic voltammetry and scanning electrochemical microscopy

The electrochemical behavior of a redox-active, ferrocene-modified ionic liquid (1-ferrocenylmethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide) in acetonitrile and in an ionic liquid electrolyte (1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide) is reported. Reversible electrochemical behavior was observed in each electrolyte with responses typical of those for unmodified ferrocene observed in each medium. In the ionic liquid electrolyte, the diffusion coefficient of the redox-active ionic liquid increased by a factor of 5 upon increasing the temperature from 27 to 90 degrees C. The kinetics of electron transfer across the ionic liquid/electrode interface were studied using cyclic voltammetry, and the standard heterogeneous electron transfer rate constant, k (0) was determined to be 4.25 x 10 (-3) cm s (-1). Scanning electrochemical microscopy was then also used to probe the heterogeneous kinetics at the interface between the ionic liquid and the solid electrode and conventional kinetic SECM theory was used to determine k (0). The k (0) value obtained using SECM was higher than that determined using cyclic voltammetry. These results indicate that SECM is a very useful technique for studying electron transfer dynamics in ionic liquids.     

Study of Electron Transfer Reactions Between a Water／1,2-Dichloro-ethane Interface by Scanning Electrochemical Microscopy

Electron transfer (ET) from ascorbic acid (AA) in aqueous to ferrocene (Fc) in 1,2-dichloroethane (DCE) was probed by the scanning electrochemical microscopy (SECM). Therate constants were extracted from the dependence of the steady-state current at ultramicro- electrode (UME, tip) on the distance between the tip and the phase boundary by comparison to theoretical working cures.     

Investigation of the electron-transfer mechanism by cross-linking between Zn-substituted myoglobin and cytochrome b(5)

We have investigated the photoinduced electron transfer (ET) in the 1:1 cross-linked complex (CL-ZnMb/b(5)) formed by a cross-linking reagent, EDC, between Zn-substituted myoglobin (ZnMb) and cytochrome b(5) (Cytb(5)) to reveal the mechanism of the inter-protein ET reactions under the condition of multiple encounter complexes. A variety of the ZnMb-Cytb(5) orientations was suggested because of failure to identify the single and specific cross-linking site on Cytb(5) by the peptide-mapping analysis using mass spectrometry. In CL-ZnMb/b(5), a laser pulse generates the triplet excited state of the ZnMb domain ((3)ZnMb()), which can transfer one electron to the Cytb(5) domain. The decay kinetics of (3)ZnMb() in CL-ZnMb/b(5) consists of a facile power-law ET phase to Cytb(5) domain ( approximately 30%) and a slower single-exponential phase ( approximately 70%). The application of the Marcus equation to this power-law phase indicates that CL-ZnMb/b(5) has a variety of ZnMb-Cytb(5) orientations for the facile ET in which the distance between the redox centers (D-A distance) is distributed over 13-20 A. The single-exponential phase in the (3)ZnMb() decay kinetics of CL-ZnMb/b(5) is similar to the intrinsic decay of (3)ZnMb() in its rate constant, 65 s(-)(1). This implies that the ET is impeded in about 70% of the total ZnMb-Cytb(5) orientations due to the D-A distance larger than 20 A. Combined with the results of the Brownian dynamics simulations for the encounter complexes, the overall bimolecular ET rate, k(app), can be reproduced by the sum of the ET rates for the minor encounter complexes of which D-A distance is less than 20 A. On the other hand, the encounter complexes with longer D-A distance, which are the majority of the encounter complexes between ZnMb and Cytb(5), have little contribution to the overall bimolecular ET rate. These observations experimentally demonstrate that ZnMb forms a variety of encounter complexes with Cytb(5), among which a minor set of the complexes with the shorter D-A distance (< approximately 20 A) regulates the overall bimolecular ET between the proteins.     

Electron transfer between ferrocene-modified Au/octadecanethiol/lipid BLM electrode and redox couples in solution

Bilayers incorporated with ferrocene consisting of self-assembled octadecanethiol and lipid monolayer on gold substrates were fabricated. Its electrochemical behaviors in solutions containing different redox couples were investigated by cyclic voltammetry and ac impedance. The transmembrane electron transfer reaction across octadecanethiol self-assembled film and an adsorbed phospholipid layer mediated by ferrocene have been observed in the solution of Fe(CN)6(3-/4-). The formal potential difference between mediator in bilayer lipid membrane (BLM) and redox couple in solution has a great impact on the transmembrane electron transfer behavior. The ferrocene-modified BLM electrodes might be useful for constructing a bilayer-based electrochemical current rectifying device.     

应用扫描电化学显微镜研究电子在室温离子液体与1,2-二氯乙烷混合溶液/水相界面上的转移反应

应用扫描电化学显微镜研究了室温离子液体(Omim·Tf2N)与1,2-二氯乙烷(DCE)混合溶液/水界面上的电子转移反应. 在保持共同离子(Tf2N-)的浓度比恒定及异相电子转移反应由界面电势差所决定的条件下, 研究了离子液体和DCE混合溶液中二茂铁(Fc)与水相中亚铁氰化钾[K4Fe(CN)6]之间异相电子转移反应. 探讨了混合溶液中离子液体的体积分数(xRTIL)的变化对混合溶液/水界面上电子转移反应的影响. 结果表明, 随着xRTIL的减小(从1减小到0.1), Fc在混合溶液中的扩散系数单调递增(从2.730×10-7 cm2·s-1增加到9.131×10-6 cm2·s-1); 而异相电子转移反应速率常数(k)则先逐渐减小(从8.0 mol-1·cm·s-1减小到0.32 mol-1·cm·s-1), 之后又略有增大(从0.32 mol-1·cm·s-1增大到0.48 mol-1·cm·s-1). 对这种现象可能的原因进行了较详细探讨.     

Ferrocene embedded in an electrode-supported hybrid lipid bilayer membrane: a model system for electrocatalysis in a biomimetic environment

An electrode-supported system in which ferrocene molecules are embedded in a hybrid bilayer membrane (HBM) has been prepared and characterized. The redox properties of the ferrocene molecules were studied by varying the lipid and alkanethiol building blocks of the HBM. The midpoint potential and electron transfer rate of the embedded ferrocene were found to be dependent on the hydrophobic nature of the electrolyte and the distance at which the ferrocene was positioned in the HBM relative to the electrode and the solution. Additionally, the ability of the lipid-embedded ferrocenium ions to oxidize solution phase ascorbic acid was evaluated and found to be dependent on the nature of the counterion.