Ion-Pair Chromatography of Metal Complexes of Unithiol in the Presence of Quaternary Phosphonium Salts

The chromatographic behavior of heavy-metal (Pb, Cd, Cu, Hg, and Ni) complexes of unithiol was studied by ion-pair reversed-phase chromatography using new ion-pair reagents: tetrabutylphosphonium and tributylhexadecylphosphonium bromides. The dependence of the retention of metal unithiolates on the nature and concentration of ion-pair reagents, concentrations of an organic solvent and inorganic salts in the mobile phase, and the pH of the mobile phase was studied. It was found that the retention of complexes increases upon increasing the hydrophobicity and concentration of the ion-pair reagent and upon decreasing the concentrations of acetonitrile and inorganic salts (NaClO₄ and NaNO₃). Optimal conditions of the separation of Pb, Cd, Cu, Hg, and Ni unithiolates were selected, and the possibility of their separate determination in a mixture was demonstrated. Concentrations of metals in process water were determined.     

An alternative strategy based on ultra-high-performance supercritical fluid chromatography for full monosaccharide compositional analysis of polysaccharides in Schisandra chinensis fruits

Due to green and environment-friendly characteristics, ultra-high-performance supercritical fluid chromatography has been widely used in analytical fields in recent years, but until now few reports are available for monosaccharide compositional analysis of macromolecule polysaccharides. In this study, an ultra-high-performance supercritical fluid chromatography technology with an unusual binary modifier is used to determine the monosaccharide compositions of natural polysaccharides. Each carbohydrate herein is simultaneously labeled as 1-pheny-3-methyl-5-pyrazolone and acetyl-derivative via pre-column derivatizations aiming to increase UV absorption sensitivity and decrease water solubility. Ten common monosaccharides are fully separated and detected on ultra-high-performance supercritical fluid chromatography combined with a photo-diode array detector by systematic optimization of multiple relevant parameters, for example, column stationary phases, organic modifiers, additives, flow rates, and so on. Compared with carbon dioxide as a mobile phase, the addition of a binary modifier increases the resolution of analytes. Additionally, this method has the advantages of small consumption of organic solvent, safety, and being environmental-friendly. It has been successfully applied for full monosaccharide compositional analysis of heteropolysaccharides from Schisandra chinensis fruits. To sum up, a new alternative approach is provided for monosaccharide compositional analysis of natural polysaccharides.     

超临界流体色谱在金属络合物和金属有机化合物中的分析应用

超临界流体色谱（SFC）在色谱分离过程中能在较低的温度下分析对热不稳定性的化合物,包括金属络合物和金属有机化合物。本文总结了近来文献报道的各种过渡金属、重金属、镧系和锕系以及铅、汞和锡的金属有机化合物的SFC分离,还讨论了SFC检测系统和金属有机化合物的溶解度的测定。     

Determination of metal ions by liquid chromatographic separation of their 2-acetylpyridine-4-ethyl-3-thiosemicarbazone chelates

A new thiosemicarbazone was prepared, characterized, and used as a complexing reagent for the chromatographic separation and determination of metal complexes by reverse-phase HPLC. The reagent was sufficiently soluble in methanol-water solutions for metal ions to be complexed in this aqueous organic phase, without need for extraction. Many variables affected the retention times of the metal complexes. Several metals were determined selectively by complexation with the reagent and chromatographic separation of the complexes. Interference effects from other metal ions were also investigated.     

Mass balance of metal species in supercritical fluid extraction using sodium diethyldithiocarbamate and dibutylammonium dibutyldithiocarbamate.

The objective of this work is to track the amount of metal complexes distributed in the extraction cell, collection vial, and tubing used in supercritical fluid extraction (SFE) systems after progressive removal of metal ions in supercritical carbon dioxide (SC-CO2). Sodium diethyldithiocarbamate (NaDDC) and dibutylammonium dibutyldithiocarbamate (DBDC) ligands were used to form complexes with Cd, Cu, Pb, and Zn and CO(2)/5% methanol as a supercritical fluid. The mass balance of metal complexes were obtained before and after extraction, and metals in different locations in the system were flushed out using an organic solvent and nitric acid (HNO3). These results infer that the stability constant (beta) of the metal-ligand complex has a strong correlation with SFE. Because of the composition of the stainless-steel cell, Fe, Cr, and Ni or other trace elements in the cell might interfere with the mass balance of metal complexes in SFE due to an exchange mechanism taking place between the cell and the sample.     

Analytical application of liquid adsorption chromatography of metal chelates

Summary A review of the most important achievements in the application of liquid adsorption chromatography (LAC) of metals as chelates is given. The advantages of the method in combination with an extraction preconcentration of metals are pointed out. The general problems of LAC of chelates (choice of a chelating reagent, requirements for chelates, conditions of formation and separation of complexes) are discussed. The applications of TLC and HPLC are considered separately. Special attention is paid to the analysis of specific objects. The analytical possibilities of TLC and HPLC are compared as applied to the separation and determination of metal chelates. The fields of application and the perspectives of developing the methods in inorganic analysis are estimated.

---

Analytische Anwendung der Flüssig-Adsorptions-Chromatographie von Metallchelaten

     

Application of a gas-liquid entraining rotor to supercritical fluid extraction : Removal of iron(III) from water

Supercritical fluid extraction (SFE) of aqueous solutions is often limited by poor mass transport. The performance of a new gas-liquid entraining device was investigated to improve mass transport and thereby increase extraction efficiency. As a test system, iron(III) was extracted from water with a β-diketone chelating agent (HL) and supercritical fluid carbon dioxide. Metal β-diketonate complexes with sufficient solubility in supercritical fluid CO₂ are often poorly extracted from aqueous solutions due to limited mass transport between the water-soluble metal ion and the CO₂-soluble chelating agent. The new entraining device maximizes contact between the ligand-rich CO₂ phase and the metal ion-rich aqueous phase. Iron(III) was extracted from water with the chelating agent 2,2,7-trimethyl-3,5-octanedione (H(tod)) and supercritical fluid CO₂ at 60 °C and 20.8 MPa. With entrainment, 79% of the iron was removed from the aqueous phase. This represents a three-fold increase in iron extraction efficiency over that of a static system.     

Modern analytical supercritical fluid chromatography using columns packed with sub-2 μm particles: A tutorial

This tutorial provides an overview of the possibilities, limitations and analytical conditions of modern analytical supercritical fluid chromatography (SFC) using columns packed with sub-2 μm particles. In particular, it gives a detailed overview of commercially available modern SFC instrumentation and the detectors that can be employed (UV, MS, ELSD, FID, etc.). Some advice on the choice of the stationary phase dimensions and chemistries, the nature of the mobile phase (choice of organic modifier and additives) and its flow rate as well as the backpressure and temperature are also provided. Finally, several groups of potentially problematic compounds, including lipophilic compounds, hydrophilic substances and basic drugs, are discussed in detail. All these families of analytes can be resolved with SFC but require specific analytical conditions.     

Chiral separation of four 1,3-dioxolane derivatives by supercritical fluid chromatography on an amylose-based column

The chiral separation of four 1,3-dioxolane derivatives by supercritical fluid chromatography on an amylose-based column is described. The effects of mobile phase composition, temperature and pressure have been investigated. The nature of the modifier is the parameter which has the highest impact on the chiral resolution and it is more important than the polarity of the mobile phase. The organic modifier used for the best enantiomeric separation was different for each compound, because it depends strongly on the molecular structure of the compound.     

Pressurized hot water extraction of insecticides from process dust--comparison with supercritical fluid extraction

Pressurized hot liquid water and steam were used to investigate the possibilities of extracting insecticides (carbofuran, carbosulfan, and imidacloprid) from contaminated process dust remaining from seed-pellet production. Extraction temperature was the most important parameter in influencing the extraction efficiency and rate of extraction, while varying the pressure had no profound effect. A clean-up procedure of the water extracts using solid phase extraction (SPE) was found to be necessary prior to final analysis by high-performance liquid chromatography (HPLC). Quantitative extraction (compared to a validated organic solvent extraction method) of imidacloprid was obtained at temperatures of 100-150 degrees C within 30 min extraction time. Temperatures above 150 degrees C were required to extract carbofuran efficiently. The most non-polar analyte of the investigated compounds, carbosulfan, gave no detectable concentrations with pressurized hot water extraction (PHWE). One reason might be its low solubility in water, and when attempts are made to increase its solubility by increasing the temperature it may degrade to carbofuran. This can explain recovery values above 100% for carbofuran at higher temperatures. A comparison of the PHWE results and those obtained with supercritical fluid extraction (SFE) revealed that PHWE is advantageous for polar compounds, where the solubility of the analyte in water is high enough that lower temperatures can be used. For non-polar compounds carbon dioxide based extraction is preferred unless the target analyte is highly thermostable.     

Separation of divalent transition metal beta-diketonates and their adducts by supercritical fluid chromatography

A method for separation and detection of divalent transition metal beta-diketonates by adduct formation/supercritical fluid chromatography (SFC) with an open-tubular capillary column and a FID detector is described. The crystal structures of copper (Cu)-hexafluoro-acetylacetone (HFA) and Cu bis(2,2,6,6-tetramethyl-3,5-heptanedionato) (THD) complexes have been determined by X-ray crystallography. The SFC behavior of Cu beta-diketonates shows a strong correlation with the structure of the complexes. The hydrated cu beta-diketonate complexes usually exhibit strong intermolecular interactions or decomposition in SFC. Formation of adducts with a neutral donor, such as tributyl phosphine oxide (TBPO), can greatly improve the SFC behavior and detection sensitivity of Cu(II) and Mn(II) beta-diketonates. The stoichiometry and thermal stability of the adducts Cu(II) and Mn(II) beta-diketonates with TBPO in supercritical CO(2) have also been investigated. The implications of utilizing adduct formation for supercritical fluid extraction (SFE) of divalent transition metals and for on-line coupled SFE/SFC analysis of divalent transition metals are discussed.     

衍生-超临界流体萃取金属离子的技术与进展

综述了近年来衍生-超临界流体萃取环境样品和环境模拟样品中金属离子的研究报道,结合作者的研究工作,着重评述了超临界流体萃取不同环境样品、环境模拟样品中金属离子的原理、萃取过程的动力学模型、衍生剂的选择原则、金属螫合物在超临界流体中的溶解度理论、影响萃取效率的因素、金属离子超临界流体萃取应用研究现状与进展等。利用流体与基体改性技术实现了金属离子和金属螯合物的超临界流体萃取,且在萃取体系中加入适量的表面活性剂能显著提高萃取效率。     

Determination of arsenic species in solid matrices utilizing supercritical fluid extraction coupled with gas chromatography after derivatization with thioglycolic acid n‐butyl ester

A method using derivatization and supercritical fluid extraction coupled with gas chromatography was developed for the analysis of dimethylarsinate, monomethylarsonate and inorganic arsenic simultaneously in solid matrices. Thioglycolic acid n‐butyl ester was used as a novel derivatizing reagent. A systematic discussion was made to investigate the effects of pressure, temperature, flow rate of the supercritical CO₂, extraction time, concentration of the modifier, and microemulsion on extraction efficiency. The application for real environmental samples was also studied. Results showed that thioglycolic acid n‐butyl ester was an effective derivatizing reagent that could be applied for arsenic speciation. Using methanol as modifier of the supercritical CO₂ can raise the extraction efficiency, which can be further enhanced by adding a microemulsion that contains Triton X‐405. The optimum extraction conditions were: 25 MPa, 90°C, static extraction for 10 min, dynamic extraction for 25 min with a flow rate of 2.0 mL/min of supercritical CO₂ modified by 5% v/v methanol and microemulsion. The detection limits of dimethylarsinate, monomethylarsonate, and inorganic arsenic in solid matrices were 0.12, 0.26, and 1.1 mg/kg, respectively. The optimized method was sensitive, convenient, and reliable for the extraction and analysis of different arsenic species in solid samples.     

Supercritical fluid extraction of Beauvericin from maize

Beauvericin (BEA), a supercritical fluid extraction with supercritical carbon dioxide from maize was investigated. Extraction efficiencies under several different extraction conditions were examined. Pressure, temperature, extraction time, organic modifier and water matrix content (10%) were investigated. The best extraction conditions were at a temperature of 60 °C, 3200 psi, for 30 min static extraction time and methanol as modifier solvent. Extraction recovery of 36% without modifier by adding water to the matrix in the extraction vessel (reproducibility relative standard deviations (R.S.D.)=3-5%) were recorded. Extraction recovery of 76.9% with methanol as co-solvent (reproducibility R.S.D.=3-5%) was obtained. Data shows that SFE gives a lower BEA recovery compared to conventional extraction protocol with organic solvents while SFE with modifier and conventional extraction yields are comparable. BEA extract contents were determined by high pressure liquid chromatography (HPLC) with a diode array detector (DAD) at 205 nm and BEA peak confirmed by LC-MS. Acetonitrile-water as mobile phase and column C-18 were both tested. Instrumental and analytical parameters were optimized in the range linear interval from 1 to 500 mg kg⁻¹ and reached a detection limit of 2 ng.     

Retention behavior of polycyclic aromatic hydrocarbons in supercritical fluid chromatography on a chemically bonded stationary phases based upon liquid-crystalline polymer

Summary The retention behavior of a set of polycyclic aromatic hydrocarbons in supercritical fluid chromatography have been studied on a chemically bonded stationary phase based upon a side chain liquid crystalline polymer (LCP) with carbon dioxide-based mobile phase. The effects of the mobile phase pressure, column temperature and amount of mobile phase organic modifier have been investigated in order to detect a possible structural change in the liquid crystal polymer linked to the silica support. The influence of these factors on the selectivity coefficients has also been studied. Two distinctive behaviors with temperature are noted at low pressure on the one hand and at higher pressure on the other. This change in behavior is based on the density of the supercritical CO₂ and the PAH volatility rather than on any specific stationary phase structural change. Both lower mobile phase pressure and amount of mobile phase modifier are required to obtain better selectivities. Better planarity recognition is observed in SFC than in HPLC with these new bonded liquid crystal stationary phases. The bonded liquid crystal phase is only weakly affected by the addition of organic modifier in the supercritical CO₂.     

固体溶质在超临界三元系统中的溶解度

溶质在超临界流体中的溶解度数据是研究超临界流体技术的基础.本文对纯组分固体溶质有夹带剂存在的超临界流体三元系统中,夹带剂增大溶质溶解度的作用进行了总结,述评了夹带剂增大溶质溶解度的机理和常用的计算模型.此外,针对两种固体混合溶质共存于超临界流体中的三元系统,讨论了混合溶质共存对彼此溶解度的影响及其相关的理论假说和计算模型.     

金属检测中新型前处理技术研究进展及应用

精准检测环境和食品中金属含量对环境保护和人体健康至关重要.样品的准备环节是造成样品损失和二次污染的关键步骤, 因此合适的前处理方法可以提高金属分析的选择性和灵敏度.从液相萃取和非液相萃取新技术两方面综述了浊点萃取、离子液体、超分子溶剂-分散液液微萃取、顶空固相微萃取技术、超临界流体萃取特点及在复杂样品前处理中的应用和研究进展, 并对其未来发展方向进行了展望.     

Supercritical fluid extraction and gas chromatography analysis of arsenic species from solid matrices

A method in combination with derivatization-supercritical fluid extraction(SFE) and gas chromatography(GC) for the speciation and quantitative determination of dimethylarsinate(DMA), monomethylarsonate(MMA) and inorganic arsenic in solid matrices was investigated. Thioglycolic acid methyl ester(TGM) and thioglycolic acid ethyl ester(TGE) were evaluated as derivatization reagents. The effects of pressure, temperature, flow rate of supercritical CO_2, extraction time, modifier and microemulsion on the efficiency of extraction were systematically investigated. The procedure was applied to the analysis of real soil and sediment samples. Results showed that TGE was more effective for arsenic speciation as a derivatization reagent. Modifying supercritical CO_2 with methanol can greatly improve the extraction efficiency. Further, the addition of microemulsion containing surfactant Triton X-100 can further enhance recoveries of arsenic species. The optimum extraction conditions were 100 ℃, 30 MPa, 10 min static and 25 min dynamic extraction with 5%(v/v) methanol, and surfactant modified supercritical CO_2. Detection limits in solid matrices were 0.15, 0.3 and 1.2 mg/kg for DMA, MMA and inorganic arsenic,respectively. The method was validated by the recovery data. The resulting method was fast, easy to perform and selective in the extraction and detection of various arsenic species in solid matrices.     

Development of a supercritical fluid chromatography high-resolution separation method suitable for pharmaceuticals using cyanopropyl silica

A method has been developed for the analysis of a broad spectrum of pharmaceuticals using packed column supercritical fluid chromatography (pSFC) on a cyanopropyl silicagel stationary phase. Five 25 cm x 4.6 mm I.D., 5.0 microm columns were coupled to generate ca. 100000 plates. The selectivity was tuned by varying the nature and concentration of various modifiers and additives in the carbon dioxide mobile phase. It was noted that pressure influences both efficiency and selectivity of the chromatographic process. Final method conditions are: outlet pressure 100 bar, flow 2.0 mL/min, temperature 40 degrees C, organic modifier program from 5% (1 min) to 40% at 2.0%/min, organic modifier composition methanol:acetonitrile in a ratio of 3:1 (variable according to sample composition) with peak symmetry additives trifluoroacetic acid and diisopropylamine both at levels of 0.5%.     

Complexation as the most important factor in the fate and transport of heavy metals in the Dnieper water bodies

The results of long-term investigations of the concentrations of dissolved forms of some heavy metals (Mn, Cu, Zn, Pb, Cr, Cd) and their species in the water of the Dnieper reservoirs and the Dnieper-Bug estuary are considered. Chemiluminescent methods, anodic stripping voltammetry, membrane filtration, ion-exchange, and gel-permeation chromatography were used for study of the speciation of the metals. It has been found that binding of heavy metals into complexes with dissolved organic matter (DOM) is the dominant factor of their stabilization in solution. The molecular weight distribution of organic metal complexes and their chemical nature, as well as the potential complexing ability of DOM were investigated. Humic substances, particularly fulvic acids, play a major role in the complexation. These ligands bind from 45 to 80% of metals in the form of organic complexes. Metal complex compounds of relatively low molecular weight (<5 kDa) predominated in the organic complexes.