Ultradeep Hydrodesulfurization of Dibenzothiophene (DBT) Derivatives over Mo-Sulfide Catalysts Supported on TiO2-Coated Alumina Composite

The present paper reviews in detail the different studies now being conducted by our research team concerning the ultradeep hydrodesulfurization (HDS) of dibenzothiophene (DBT) derivatives over Mo/TiO₂ and Mo/TiO₂–Al₂O₃ catalysts. First, a detailed characterization of Mo/TiO₂ (P-25 Degussa, 50 m²/g) catalysts prepared by equilibrium adsorption technique shows that Mo- species are highly and uniformly dispersed on the surface of titania up to 6.6 wt% MoO₃ loading. Above this value, some aggregation of Mo occurs, leading to the formation of bulk MoO₃. Below 6.6 wt% MoO₃ loading, the Raman spectroscopy data of the calcined samples show that the supported Mo-species possess a highly distorted octahedral MoO₆ structure. TiO₂–Al₂O₃ composites were prepared by chemical vapor deposition (CVD) using TiCl₄ as a precursor. Using several characterization techniques, we demonstrated that the support composite presents a high dispersion of TiO₂ over -Al₂O₃ without forming precipitates up to ca. 11 wt% loading. Moreover, the textural properties of the composite support are comparable to those of alumina. Under the present sulfidation conditions (673 K, 5%H₂S/95%H₂), Mo-species supported on TiO₂ are better sulfided than on alumina, as demonstrated using XPS. This can be attributed to the relatively lower interaction between Mo-species and titania. The state of sulfide species supported on the composite support can be considered as a transition state between TiO₂ and Al₂O₃. However, at relatively higher TiO₂ loadings (ca. 11 wt%), Mo/TiO₂–Al₂O₃ catalysts exhibit sulfidability similar to that of Mo/TiO₂. The HDS tests conducted in both the laboratory and in industry show that sulfide catalysts supported on TiO₂–Al₂O₃ (ca. 11 wt% TiO₂) are more active than those supported on TiO₂ or Al₂O₃.     

Mn-Mo-W-O_x脱硝催化剂活性组分的配伍优化

采用等体积浸渍法制备系列Mn-Mo-W-O_x/堇青石和Mn-Mo-W-O_x/TiO_2催化剂,用于选择性催化还原NO.通过Mn、Mo、W 3种元素不同配比对催化剂配伍进行优化,确立Mn-Mo-W-O_x最佳配比.采用XRD、N_2-BET、PyIR、SEM以及XPS等表征分析催化剂的固相结构、比表面积、酸量、表面形貌和表面元素.结果表明:当Mn/Mo/W元素摩尔比为10∶0.5∶1,载体为TiO_2时,催化剂的催化性能最优.适量Mo掺入Mn-W-O_x催化剂可以增大其比表面积,提高催化剂表面L酸酸量以及Mn~(4+)离子浓度,从而有效提高了催化剂高温活性.载体替换为TiO_2时催化剂的比表面积和酸量明显提高,从而增强了催化剂的脱硝性能.     

Effect of TiO2 crystallite size on the dispersion of Co on nanocrystalline TiO2

Nanocrystalline TiO₂ powders with average crystallite sizes of 9–15 nm were synthesized by the solvothermal method and employed as supports for Co catalysts. The value of H₂ chemisorption/specific surface area of Co/TiO₂ increased significantly with increasing TiO₂ crystallite size. It was suggested that the higher amount of Ti³⁺ surface defects on the larger crystalline TiO₂ resulted in a stronger interaction between Co and TiO₂, hence, higher dispersion of Co was obtained.     

CuO Catalysts Supported on Porous TiO2 Microspheres for Low-Temperature CO Oxidation

The porous TiO₂ microspheres were prepared by the reversed-phase suspension polymerization and sol-gel method using reversed-phase suspension droplets as the templates. The CO oxidation catalytic properties of the CuO/TiO₂ catalysts prepared by hydrothermal method and impregnation method were extensively investigated. The structure of CuO/TiO₂ catalysts was determined by TG-DTA, XRD, TEM, and XPS. The results indicated that the redox capacity of CuO/TiO₂ was greatly depended on the aqueous solution concentration of Cu(NO₃)₂ used in the preparation of CuO/TiO₂ and the calcination temperature of the CuO/TiO₂ catalysts.     

EXAFS characterization of Ti/Al2O3 supports and Co/Ti/Al2O3 catalysts

The structure of Ti/Al₂O₃ supports (0–14 wt% Ti) and Co/Ti/Al₂O₃ catalysts (3 wt% Co) was examined by EXAFS. The results indicated that the Ti was present primarily as a highly dispersed surface phase. The Ti EXAFS results indicated that the Ti species were octahedrally coordinated. Evidence of Ti—Ti interactions was found for all loadings (2–14 wt% Ti) suggesting that the Ti surface species are present as small clusters of TiO₂.The Co EXAFS results showed evidence for several structurally different Co surface phases as a function of Ti loading. Evidence of a Co species interacting with the Ti surface phase was observed for the 3% Co/2% Ti-3%Co/6%Ti catalysts. At the highest loadings studied, 3%Co/8%Ti and 3%Co/14%Ti, evidence was found for a CoTiO₃-like phase.     

Low temperature CO oxidation on Au/TiO2 sol-gel catalysts

A comparative study on Au/TiO₂catalysts prepared by impregnation with HAuCl₄of commercial TiO₂ or by impregnation of sol-gel derived TiO₂has been carried out during CO oxidation. Specific surface areas and mean Au particle of 49 and 74 m²/g and 35 and 25 Å were obtained for impregnated commercial TiO₂ and sol-gel preparations, respectively. XRD patterns shown that in sol-gel derived TiO₂ only anatase phase was identified, while in commercial TiO₂ anatase and rutile phases co-exist. Titania support effect on Au activity for the oxidation of CO has been observed. The light-off during the reaction on Au/TiO₂initiates at 50°C, whereas for commercial impregnated TiO₂ catalyst the light-off initiates at 200°C.     

转晶纳米TiO2的制备及其声催化活性的研究

近几年兴起的半导体多相光催化技术在有机废水处理方面受到了人们的普遍关注[1,2]。众多的半导体光催化剂材料中,TiO2因其化学性质稳定和催化效率高而倍受青睐[3,4]。在紫外光的照射下,TiO2与H2O产生具有极强氧化能力的HO·自由基,最终可使废水中的有机物完全降解生成CO2,H2O以     

Titania-supported mixed HPMoV polyoxometallates as precursors of hydrodesulfurization catalysts

HDS catalysts were prepared by loading H₃PMo₁₂O₄₀ or H₄PMo₁₁V₁O₄₀ polyoxometallates on TiO₂ (0.5 and 1.0 mmol (Mo+V)). Activity of the catalysts was tested in the HDS of thiophene. The activity of catalysts of low concentration was 2–3 times higher than the activity of those of high concentration. Temperature programmed reduction (TPR) and IR spectroscopy were used to determine the properties of the catalyst. TPR measurements proved that vanadium promotes and stabilizes HDS activity due to an increase in the Mo⁵⁺/Mo⁴⁺ ratio.     

Preparation of TiO2 nano-particle photocatalysts by a multi-gelation method: the effect of pH change

TiO₂ photocatalysts were prepared by a multi-gelation method and the effect of the changes in the pH during the pH swing times, i.e., by a controlled pH swing, on the morphology of the TiO₂ particles was investigated. The photocatalytic properties of the TiO₂ catalysts prepared by controlled pH swing were compared with TiO₂ particles prepared without adjusting the pH during the swing times. The photocatalytic degradation reaction of these TiO₂ catalysts was investigated by comparing their effectiveness in 2-propanol oxidation. The experimental results showed that the TiO₂ photocatalysts prepared without adjusting the pH performed better in controlling the important parameters of the catalysts such as particle size, surface area, anatase/rutile phase ratio and pore size, as well as pore volume than the TiO₂ photocatalysts prepared by a controlled pH swing method. Deceased.     

Synthesis of nanosized TiO2/SiO2 catalysts by the ultrasonic microemulsion method and their photocatalytic activity

Nanosized TiO₂/SiO₂ catalysts prepared by hydrolysis of titanium n-butoxide in microemulsion showed enhanced photocatalytic activity. In the presence of catalyst ME-2 and after 90 min irradiation by UV light, methylene blue was completely converted evidenced by the absence of its absorption band in the UV-Vis spectra. This catalyst demonstrated much better degradation ability than P-25 and naked TiO₂.     

超临界流体干燥法制备纳米TiO2-SnO2-SiO2复合光催化剂及其光催化性能研究

半导体多相光催化法作为一种污染治理新技术越来越受到人们的重视,在所使用的半导体光催化剂中,TiO2以无毒,催化活性高,价廉,无污染等特点,成为最具有前途的绿色环保型催化剂之一[1],但其自身具有局限性,如禁带宽度大,需在近紫外光下才能激发产生电子空穴对,对太阳光的利用率仅     

Enhancement of ethanol electrooxidation on plasmonic Au/TiO2 nanotube arrays

Novel electrocatalysts Au/TiO₂ nanotube arrays (Au/TiO₂NTs) were prepared by loading low-content(1.9 at.%) of Au nanoparticles (AuNPs) onto highly ordered TiO₂ nanotube arrays (TiO₂NTs). Ethanol electrooxidation indicates that visible-light (λ > 400 nm) irradiation can significantly enhance the activity as well as resistpoisoning of Au/TiO₂NTs electrocatalysts that are activated by plasmon resonance. Au/TiO₂NTs catalysts calcinated at 300 °C display the highest performance due to the strong synergistic interactions between TiO₂ and Au NPs. The combination of visible-light irradiation with a controllable potential offers a new strategyfor enhancing the performance of anodes in direct ethanol fuel cell (DEFC).     

Adsorption and reaction studies on cobalt/alumina catalysts prepared by changing pH coprecipitation

Co/Al₂O₃ catalysts prepared by changing pH coprecipitation with Co loadings in the 8.7–36 wt.% range were analyzed by TSA, TPV, pore structure, XRD as well as CO, H₂, O₂ adsorption and CO hydrogenation. High O₂ uptake and reducibility coupled with low dispersion and constant MSA above 17 wt.% Co indicate large crystallites that are less exposed to H₂. CO hydrogenation per Co site decreases with increasing dispersion or decreasing metal loading.     

Supported oxorhenate catalysts prepared by thermal spreading of metal Re for methanol conversion to methylal

TiO₂-anatase and SiO₂ supported oxorhenate catalysts were prepared by an original and simple technique based on the oxidative dispersion of metallic rhenium under dry conditions. The dispersion process of the supported oxorhenate phase as a function of the rhenium coverage and the support properties are discussed on the base of in situ characterization. The structures of the as prepared catalysts were found to be comparable to those of materials prepared using the incipient wetness impregnation technique. The absence of water in the preparation technique has made it possible to highlight the role of the hydration level on the rhenium oxide volatilization. The as-prepared Re/TiO₂ catalysts were found to be effective for the direct conversion of methanol to methylal.     

热扩散法制备MoO3/SiO2催化草酸二甲酯和苯酚酯交换反应

采用热扩散法（TS）和等体积浸渍法制备了MoO₃/SiO₂催化剂用于草酸二甲酯和苯酚酯交换反应.结果表明,热扩散法制备的10%MoO₃/SiO₂-TS催化剂较等体积浸渍法制备的10%MoO₃/SiO₂-C催化剂具有更好的催化性能.运用X射线衍射、Raman光谱、X射线光电子能谱分析、吡啶吸附红外光谱、NH₃程序升温脱附等手段对催化剂进行了表征,发现虽然两种方法制备的催化剂都只有弱Lewis酸中心,钼均以氧化钼单体形式存在,未形成解离和聚合,但是10%MoO₃/SiO₂-TS催化剂较10%MoO₃/SiO₂-C催化剂表面钼含量更高且MoO₃分散得更好.在苯酚用量为0.2mol,10%MoO₃/SiO₂-TS催化剂用量为1.2g,反应温度为180℃,草酸二甲酯与苯酚的摩尔比为2,反应时间为4h的优化条件下,苯酚转化率可达70.9%,甲基苯基草酸酯和草酸二苯酯的收率分别达63.1%和7.7%.     

负载型CuO/TiO2催化剂催化CO2加氢制甲醇

采用浸渍法制备了CuO/TiO_2负载型催化剂,并将其用于CO2加氢制甲醇反应。重点考察了铜的负载量对催化剂性能的影响,并对其物化性能和催化性能之间的关系进行了讨论。结果发现,随着铜负载量的增加,催化剂中金属铜的比表面先增加后减小,当铜的负载量为10%(质量百分数)时达到最大值。催化剂的表面碱性位数量随铜含量的增加持续减小,中等碱位和强碱位的强度下降。当铜的负载量不高于10%时,CO2的转化率与铜的比表面积呈线性关系。甲醇选择性与催化剂的表面碱位性质有关,过强的碱性位会降低甲醇选择性。     

负载型CuO/TiO2催化剂催化CO2加氢制甲醇

采用浸渍法制备了CuO/TiO₂负载型催化剂,并将其用于CO₂加氢制甲醇反应。重点考察了铜的负载量对催化剂性能的影响,并对其物化性能和催化性能之间的关系进行了讨论。结果发现,随着铜负载量的增加,催化剂中金属铜的比表面先增加后减小,当铜的负载量为10%（质量百分数）时达到最大值。催化剂的表面碱性位数量随铜含量的增加持续减小,中等碱位和强碱位的强度下降。当铜的负载量不高于10%时,CO₂的转化率与铜的比表面积呈线性关系。甲醇选择性与催化剂的表面碱位性质有关,过强的碱性位会降低甲醇选择性。     

Preparation and photocatalytic activity of high-efficiency visible-light-responsive photocatalyst SnSx/TiO2

Visible-light-responsive composite photocatalysts SnS₂/TiO₂ and SnS/TiO₂ with different mass ratios were prepared by in-situ synthesis technology in solution with commercial TiO₂. The junction-based materials SnS_x (x=1, 2)/TiO₂ were found to have high visible-light photocatalytic performance and possess much better activity than the single-phase SnS_x or TiO₂. The greatly enhanced photocatalytic activity of the SnS_x/TiO₂ composites was mainly attributed to the matching band potentials and efficient charge transfer and separation at the tight-bonding interface between SnS_x and TiO₂. The fact was confirmed by the comparison of photocatalytic activities of the SnS₂/TiO₂ samples prepared by physical mixing method and in-situ synthesis technique.     

Effect of metal deposition on the photocatalytic activity of titania-silica for the removal of 2-propanol diluted in water

The influence of transition metals, such as Ag, Cr, and Co, on the photocatalytic properties of titania-silica (TiO₂-SiO₂) prepared via both impregnation (imp) and photo-assisted deposition (PAD) methods has been investigated. The decomposition of 2-propanol under UV-light irradiation was used to probe the effect of transition metals deposition on the activity of titania-silica. PAD-Ag/TiO₂-SiO₂ prepared by the PAD method was highly active compared to the original TiO₂-SiO₂, while imp-Cr/TiO₂-SiO₂ prepared by conventional impregnation method showed a weak tendency toward the decomposition of 2-propanol.     

Pt/TiO2催化剂上CO氧化反应动力学研究

利用沉积沉淀法制备了Pt/TiO₂催化剂, 将其在不同温度下焙烧, 以得到不同颗粒尺寸的Pt. 并将这些样品用于CO催化氧化反应以及反应动力学研究. 结果表明: 焙烧温度对催化剂有明显影响, Pt 颗粒尺寸随着焙烧温度的升高而增加; 与此同时, CO催化活性随焙烧温度的升高呈先增加后降低的趋势, 其中, 400℃焙烧的样品表现出最高的催化活性. 反应动力学结果表明, 催化剂上CO氧化反应表观速率方程为r=5.4×10^-7p_CO^0.17p_O2^0.36,说明在该催化剂上CO氧化遵循Langmuir-Hinshelwood机理. 同时, 对催化剂进行了CO化学吸附红外光谱和O₂化学吸附表征. 结果表明, 随着焙烧温度的升高, 催化剂上CO和O₂吸附量均呈现先升高后降低的趋势, 这与反应结果和反应动力学方程一致, 说明反应受到催化剂表面上CO和O₂吸附浓度的影响. 而在400℃焙烧的催化剂上, CO和O₂吸附量均最高, 因此其反应活性也最好. 这可能是焙烧过程影响了Pt 和TiO₂之间的相互作用引起的.