新型脲基双子表面活性剂的合成及其性能

以N,N-二甲基-1,3-丙二胺、固体光气、溴代烷为原料合成了三种新型含脲基双子表面活性剂(LY-12、LY-14、LY-16),并通过1H NMR、ESI-MS和FT-IR表征了结构。测定了其Krafft点、乳化性能、起泡性能;通过测定表面张力γcmc以及不同温度下的临界胶束浓度(CMC)计算表面活性参数(Γmax、Amin、pc20)与热力学参数(ΔGmθ、ΔHmθ、ΔSmθ)。结果表明,LY-12、LY-14的Krafft点低于0℃,LY-16的Krafft点低于10℃;LY-12、LY-14、LY-16的乳化时间分别为173、275和338 s;LY-12的起泡性显著优于LY-14和LY-16;三种表面活性剂的表面张力γcmc分别为38. 77、37. 42和36. 59 m N/m;298. 15K条件下,其CMC值分别为0. 19、0. 15、0. 13 mmol/L。表面活性参数与热力学参数计算表明,三种表面活性剂均具有高的表面活性且胶束的形成是熵驱动的自发放热过程。     

三烷基季铵盐阳离子表面活性剂的合成与性能测定

用柠檬酸、十二烷基二甲基叔胺与环氧氯丙烷反应合成了柠檬酸三酯三烷基季铵盐阳离子表面活性剂。实验结果表明,在异丙醇溶剂中,反应体系在80℃,反应时间12h,产物的收率为91.5%。用红外光谱、元素分析、高效液相色谱对其结构进行了表征,通过测定其临界胶束浓度、Krafft点及泡沫性能,对产物表面活性进行了分析。     

双酯基型Gemini表面活性剂的合成及其性能

以1,4-环己二醇、氯乙酰氯、长链叔胺(RN(CH_3)_2,R=10、12、14、16)为原料,合成了一系列不同长度烷基链的双酯基型Gemini表面活性剂(分别命名为C10-EG-10、C12-EG-C12、C14-EG-C14、C16-EG-C16),用FTIR、NMR(~1H、~(13)C)对中间体及产物进行了表征,并研究了表面活性剂的表面性能及抑菌能力。结果表明:在298.15K时,采用铂金环法测定了合成的4种不同长度烷基链Gemini表面活性剂的临界胶束浓度,C10-EG-C10、C12-EG-C12、C14-EG-C14、C16-EG-C16的CMC值分别为5.495、1.096、0.186、0.045 mmol·L~(-1),与传统单链季铵盐表面活性剂相比,合成的Gemini表面活性剂具有较低的CMC值。胶束化热力学参数结果表明在形成胶束过程中是自发放热的。对合成的4种表面活性剂进行了乳化性能、起泡性能和抑菌测试,C14-EG-C14表面活性剂具有很好的乳化能力;C16-EG-C16 Gemini表面活性剂具有良好的稳泡能力;C10-EG-C10表面活性剂具有良好的抑菌能力。     

油酸酰胺基季铵盐Gemini表面活性剂的制备及性能

以油酸酰胺丙基二甲基胺、1,3-二氯-2-丙醇、1,4-二溴-2-丁烯和1,4-二溴丁烷为原料,分别合成了3种不同连接基团的油酸酰胺基季铵盐阳离子Gemini表面活性剂GS-1、GS-2和GS-3。通过傅里叶变换红外光谱(FT-IR)和核磁共振波谱(1 H NMR)对其结构进行表征,并对其Krafft温度、表面活性、乳化性能、泡沫性能、润湿性等性能进行了测定。结果表明,成功制备了3种Gemini表面活性剂GS-1、GS-2和GS-3,且其Krafft温度均小于0℃,为其低温环境下使用,仍然保持较高表面活性提供了理论可能性。GS-1、GS-2和GS-3的临界胶束浓度(CMC)分别为7.7×10^-5、7.08×10^-5和2.63×10^-6 mol/L,和预期结果一致,Gemini表面活性剂的CMC比传统的单链表面活性剂低1~2个数量级;另外,表面活性剂GS-1、GS-2和GS-3均表现出良好的表面活性、乳化性能和泡沫稳定性。     

糖苷基季铵盐与十二烷基硫酸钠复配性能的研究

研究了糖苷基季铵盐(CAPG)与十二烷基硫酸钠(K12)复配体系的稳定性、表面活性、泡沫性能和润湿性能.结果表明:CAPG与K12复配体系的稳定性好,并表现出很好的协同增效作用.当n(CAPG)∶ (K12)等于0.1∶ 1,0.3∶ 1,0.5∶ 1时,复配体系的临界胶束浓度(cmc)分别为0.081 mmol/L,0.065 mmol/L,0.054 mmol/L,大大低于单一组分的cmc,临界胶束浓度时的表面张力(γcmc)比单一组分略低,起泡力和泡沫稳定性均好于单一组分,润湿力比K12略低,但比CAPG好得多.     

丙烯酰胺型阴离子表面活性单体的化学结构与其胶束化行为

对两种丙烯酰胺型阴离子表面活性单体(2-丙烯酰胺基十四烷磺酸钠, NaAMC₁₄S; 2-丙烯酰胺基十二烷磺酸钠, NaAMC₁₂S)的化学结构与胶束化行为的关系进行了较深入的研究. 使用紫外分光光度法测定了NaAMC₁₄S, NaAMC₁₂S及十二烷基磺酸钠(SDS)在水中的溶解度, 同时采用表面张力法(环法)测定了它们在不同温度下的临界胶束浓度CMC; 采用稳态荧光探针法测定了不同浓度的胶束聚集数与本征胶束聚集数. 实验结果表明, 与普通表面活性剂相比, 由于丙烯酰胺型阴离子表面活性单体分子中具有两个亲水头基, 在水中的溶解性能较强, 故具有较低的Krafft温度; 在溶液表面的饱和吸附量低, 故降低水表面张力的能力较差, 即表面活性差; 疏水缔合的胶团较为疏松, 故聚集数很小; 胶束内分子间的疏水相互作用较弱, 故临界胶束浓度CMC较高.     

两性孪联表面活性剂的合成及溶液性质

用C10～C16脂肪醇与2-氯-2-氧-1,3,2-二氧磷杂环戊烷低温反应生成环状磷酸酯的中间产物,再用N,N-二甲基十二胺在亲核溶剂中65℃下开环反应合成了4种含N 和磷酸根阴离子的两性孪联表面活性剂C10-C12、C12-C12、C14-C12和C16-C12,其质量收率分别为32%、54%、18%和28%。产物的结构通过1HNMR和元素组成分析,表明两性离子表面活性剂C、H、O、N的分析值与理论计算值偏差不超过0.3%。四种表面活性剂的临界胶束浓度(cmc)在0.0072~0.0125mmol/L之间,临界胶束浓度时表面张力(γcmc)依次为23.90、25.61、27.68和36.08mN/m。其中,C10-C12、C12-C12和C14-C12有较好的界面活性,加入盐可以使表面活性剂与烷烃间的界面张力下降,但下降程度有限,不能达到超低界面张力(10-3mN/m)。     

含荧光基团连接链的新型季铵盐型双子表面活性剂的合成及其性能

通过Suzuki偶联反应和傅克酰基化反应制得了一系列新型的以共轭荧光分子噻吩-苯-噻吩为连接链的双子表面活性剂,利用季铵化反应在共轭链的两侧修饰亲水单元,合成了新型的具有不同疏水链长的季铵盐型双子表面活性剂（m-TBT-m）,其结构和性能经UV-Vis, FL和¹H NMR表征。结果表明：8-TBT-8、 10-TBT-10、 12-TBT-12、 14-TBT-14及16-TBT-16的临界胶束浓度（CMC）分别为1×10^-6 mol·L^-1、 4×10^-6 mol·L^-1、 1×10^-5 mol·L^-1、 2×10^-5mol·L^-1和4×10^-5 mol·L^-1。     

疏水缔合聚丙烯酰胺在表面活性单体胶束溶液中的制备及其流变特性

配制了表面活性单体2-丙烯酰胺基十二烷磺酸钠(NaAMC12S)与十二烷基硫酸钠(SDS)的胶束溶液,分别测定了强疏水单体N-正十二烷基丙烯酰胺(C12AM)在两种胶束溶液中的增溶性能;在此基础上,于两种胶束溶液中分别进行了丙烯酰胺(AM)与C12AM的胶束共聚合,制备了疏水缔合聚丙烯酰胺(HAPAM),它们分别为二元共聚物C12AM/AM与三元共聚物C12AM/NaAMC12S/AM;测定了两种共聚物的红外光谱;采用荧光探针法与表观粘度法重点研究了它们的疏水缔合性与流变性能.结果表明,在表面活性单体NaAMC12S的胶束溶液中,可顺利地实现AM与疏水单体的胶束共聚合,由于表面活性单体也参与了共聚合,故制得的产物为三元共聚物C12AM/NaAMC12S/AM;与在SDS胶束溶液中制备的二元共聚物C12AM/AM相比,前者的疏水缔合性更强,其强疏水缔合性以强疏水单体C12AM的贡献为主,以表面活性单体NaAMC12S的贡献为辅.     

壬基酚聚氧乙烯醚型Gemini季铵盐表面活性剂的合成 及其表面性质的研究

合成了系列壬基酚聚氧乙烯醚型Gemini季铵盐表面活性剂(GNPQA), 用核磁、红外和元素分析对它们的结构进行了表征, 考察了反应条件对转化率的影响, 并用表面张力法和稳态荧光探针法对GNPQA的表面性能及胶束聚集数(N)进行了研究. 结果表明, 较优的反应条件: 反应时间为12 h, 反应温度为70 ℃, 反应原料摩尔比为n(双聚壬基酚聚氧乙烯醚)∶n(三乙胺)∶n(环氧氯丙烷)＝1∶1∶1; GNPQA的临界胶束浓度(CMC)值较相应的单体壬基酚聚氧乙烯醚型季铵盐表面活性剂(NPQA)降低了1～2个数量级, 显示了较高的表面活性; 当GNPQA溶液浓度为5～9倍CMC时, N值随浓度增大而线性增大; 随着氧乙烯(EO)单元数的增长, GNPQA的CMC和N值均逐渐减小; 结合GNPQA的表面性能参数和N值的变化规律, 探讨了这类表面活性剂表面及胶束聚集体的结构形态.     

硫脲基咪唑啉季铵盐的合成及其缓蚀作用

用戊酸、羊蜡酸、油酸、二乙烯三胺、氯化苄和硫脲为原料,合成了6种咪唑啉季铵盐化合物。 采用静态失重法和极化曲线法,比较了硫脲基烷基咪唑啉型季铵盐和烷基咪唑啉型季铵盐在80 ℃、1 mol/L的HCl溶液中对碳钢的缓蚀性能,研究了这两类缓蚀剂与无机阴离子和阴离子表面活性剂的协同作用。 结果表明,硫脲基烷基咪唑啉季铵盐类的缓蚀效果明显优于烷基咪唑啉季铵盐类,硫脲基羊脂酸咪唑啉缓蚀剂的缓蚀率可达98.3%。 当以羊脂酸、二乙烯三胺、氯化苄和硫脲为原料合成的硫脲基烷基咪唑啉型季铵盐化合物与I-质量比为1∶1复配时,缓蚀效果最佳,比单独使用硫脲基烷基咪唑啉季铵盐化合物的缓蚀率提高了1.5%。     

Supra-long chain surfactants with double or triple quaternary ammonium headgroups

Novel supra-long chain surfactants with double or triple quaternary ammonium salts (C(n)-2Am, C(n)-3Am, in which n represents a hydrocarbon chain length of 18, 20, and 22) were synthesized, and electrical conductivity and surface tension were used to characterize their properties depending on both the hydrocarbon chain length and number of hydrophilic groups. The Krafft temperatures decreased remarkably with an increase in the quaternary ammonium headgroups, resulting in a high solubility in water. The critical micelle concentration (cmc) increased with an increase in the number of quaternary ammonium moieties in the hydrophilic group, and the difference in the cmc was smaller for C(n)-2Am and C(n)-3Am than for C(n)-2Am and C(n)-Am of alkyltrimethylammonium bromide. The surface tension at the cmc was approximately 45 and 48 mN m(-1) for C(n)-2Am and C(n)-3Am with n=18-22, respectively. This indicated that the supra-long chain surfactants could not efficiently adsorb at the air/water interface and orient by themselves, as is known for conventional surfactants.     

Synthesis and Crystal Structure of 4-Arylamino-6-chloropyrido[3,2-d]pyrimidine

The title compounds 4a～c were synthesized and characterized by IR,NMR and MS.The crystal structure of C16H13ClN4O2·HBr·H2O(I),the quaternary ammonium salt of 4c,was determined by X-ray diffraction analysis.I crystallizes in triclinic,space group P1 with a = 8.3121(8),b = 9.3885(8),c = 13.2903(12),α = 106.788(2),β = 95.204(3),γ = 110.871(2)o,V = 905.81(14)3,Z = 2,C16H16BrClN4O3,Mr = 427.68,Dc = 1.568 g/cm3,F(000) = 432.00,μ = 2.446 mm-1,R = 0.0496 and wR = 0.127.X-ray analysis reveals that C(15) in the BrCH2COOH molecule binds to the N(1) of pyrimidine ring to form the quaternary ammonium salt.Two adjacent I molecules are connected by hydrogen bonds through carboxylate oxygen,water molecule and hydrobromic acid.     

金属缓蚀剂Gemini型咪唑啉双季铵盐的合成及其性能的研究

合成了系列新型咪唑啉双季铵盐阳离子缓蚀剂（S-HSJ）,研究并讨论了其在5%盐酸介质中对铜、铝等金属的缓蚀性能及缓蚀剂结构中亲油基部分碳链长度、缓蚀时间、缓蚀剂浓度等对缓蚀效果的影响。研究表明：S-HSJ系列咪唑啉双季铵盐对红铜、黄铜、铝及马口铁四种金属均表现出较传统单季铵盐与苯并三氮唑缓蚀剂好的缓蚀性能,S-HSJ-16双季铵盐添加量0.1%时缓蚀效率可达94~99%,S-HSJ与阴离子表面活性剂复配对铜腐蚀表现出明显协同效应。     

Studies on a Cationically Modified Quaternary Ammonium Salt of Lignin

A new quaternary ammonium salt monomer was synthesized and a quaternary amination of lignin(noted as QL),with the monomer was carried out by grafting copolymerization.The products were characterized by Fourier Transform Infrared spectroscopy(FTIR).The experimental results indicate that the yield of the monomer was 99.06%,and the conversion of the monomer and the grafting yield of QL were 93.69% and 185.78%,respectively.The feasibility of QL as the flocculant to be applied in color removal of five artificial dyes,eriochrome black T(dye A),gongo red(dye B),direct fast black G(dye C),cuprofix blue green B(dye D),and acid black ATT(dye E)was examined.Results show that QL exhibits the favorable flocculation performance and high stability.     

分散聚合法制备耐盐型两性絮凝剂及絮凝性能

以丙烯酰胺(AM)为主体,同时引入正、负2种电荷基团单体,在盐水介质中采用分散聚合法,成功制备了耐盐型两性絮凝剂（P（AM/AA/DMBAC）,简称AAB系列）。 系统地考察了分散介质、分散剂、单体浓度和链转移剂（次磷酸钠、甲酸钠）用量对两性絮凝剂AAB特性粘数和表观黏度的影响,确定了最佳反应条件为：n(AM)∶n(AA)∶n(DMBAC)=90∶5∶5,w（单体含量）=13%、w（PDAC）=6%(基于单体总质量)、w（硫酸铵）=25%(基于体系质量)、w（引发剂（VA-044））=0.2%(基于单体总质量)、ρ（次磷酸钠）=0.05 g/L、ρ（甲酸钠）=1.0 g/L,反应温度35 ℃,反应时间24 h,并通过絮凝试验评价了该两型絮凝剂的絮凝性能和耐盐性。 结果表明,在最佳反应条件下,两性絮凝剂具有较大的特性粘数（5.2 dL/g）和良好的稳定性;在高盐浓度的模拟污水中,两性絮凝剂具有使用剂量小（30×10-6）,絮团沉降速率快（2.56 s-1）等优点,表现出优异的絮凝能力和良好的耐盐性。     

理想混合表面活性剂表面张力的计算公式及实验验证

采用Newton迭代法, 给出了两种计算二组分表面活性剂理想混合体系表面张力的显函数简捷表达式, 并通过膦氧化物同系物, 季铵盐混合体系, 以及全氟辛酸铵和全氟壬酸铵混合系列表面张力的实验值和数值解对其精确性进行了验证. 结果表明, 两种迭代法都有很快的收敛速度, 表达式的相对误差都在1%之内.     

Effect of the nature of the counterion on the properties of anionic surfactants. 5. Self-association behavior and micellar properties of ammonium dodecyl sulfate

Micelles formed in water from ammonium dodecyl sulfate (AmDS) are characterized using time-resolved fluorescence quenching (TRFQ), electron paramagnetic resonance (EPR), conductivity, Krafft temperature, and density measurements. TRFQ was used to measure the aggregation number, N, and the quenching rate constant of pyrene by dodecylpyridinium chloride, k(Q). N depends only on the concentration (C(aq)) of ammonium ions in the aqueous phase whether these counterions are derived from the surfactant alone or from the surfactant plus added ammonium chloride as follows: N = N0(C(aq)/cmc0)(gamma), where N0 is the aggregation number at the critical micelle concentration in the absence of added salt, cmc0, and is equal to 77, 70, and 61 at 16, 25, and 35 degrees C, respectively. The exponent gamma = 0.22 is independent of temperature in the range 16 to 35 degrees C. The fact that N depends only on C(aq) permits the determination of the micelle ionization degree (alpha) by employing various experimental approaches to exploit a recent suggestion (J. Phys. Chem. B 2001, 105, 6798) that N depends only on C(aq). Utilizing various combinations of salt and surfactant, values of alpha were obtained by finding common curves as a function of C(aq) of the following experimental results: the Krafft temperature, N, k(Q), the microviscosity of the Stern layer determined from the rotational correlation time of a spin probe, 5-doxyl stearic acid methyl ester, and the spin-probe sensed hydration of the micelle surface. The values of alpha, determined from applying the aggregation number-based definition of alpha to all of these quantities, were within experimental uncertainty of the values alpha = 0.19, 0.20, and 0.21 derived from conductivity measurements at 16, 25, and 35 degrees C, respectively. The volume fraction of the Stern layer occupied by water decreases as N increases. For AmDS micelles, both the hydration and its decrease are predicted by a simple theory of micelle hydration by fixing the parameters of the theory for sodium dodecyl sulfate and employing no further adjustable parameters. For a given value of N, the hydration decreases as the temperature increases.