溶剂热法合成CdSxSe1-x棒状纳米材料

以乙二胺为溶剂，制备了直径为10～20 nm、长度100～150 nm的棒状CdS_xSe_1-x纳米晶体，并对其形成过程及机理进行了探讨。研究发现CdS_xSe_1-x纳米晶体在120 ℃下就可形成且纳米棒的形貌不受温度及反应物配比的影响。紫外-可见光谱表明得到的CdS_xSe_1-x纳米晶体的光学性质可通过简单改变反应物中S与Se的配比进行调控。     

Pr1－xSrxAlO3－δ的合成及其作为固体氧化物燃料电池阴极的性能研究

采用固相反应法合成了一系列样品Pr_1－xSr_xAlO_3－δ (x＝0, 0.05, 0.1, 0.2, 0.3, 0.4, 0.5). XRD结果表明, Sr在A位上的固溶度约为20%; 利用交流阻抗法测量了样品的电导率, 结果表明, 电导率随着Sr掺入量的增加而增大, Pr_0.8Sr_0.2AlO_3－δ的电导率最大, 在850 ℃达到0.02 S/cm; 离子迁移数的测试结果说明, Pr_1－xSr_xAlO_3－δ为离子电子混合导体; 考察了它们作为固体氧化物燃料电池(SOFCs)阴极的性能, 极化曲线和阻抗的测试结果表明, 阴极性能随着Sr掺入量的增加而提高; 阴极稳定性测试结果表明, 在测量时间范围内, 阴极过电位随时间缓慢下降.     

NbS2-xSex的制备、表征及其摩擦学性能

本文采用固相反应合成了NbS_2-xSe_x纳米材料。并分别采用XRD、SEM、TEM、HRTEM进行了结构、形貌和成分的分析表征。系统研究了合成温度、保温时间及不同掺杂量对产物晶型和形貌演化的影响及规律性。结果表明Se的掺杂使NbS_2-xSe_x的形貌由纳米带(板)转变为纳米片,衍射峰明显宽化,峰强变弱,晶粒细化。且掺杂量、保温温度及时间对产物的形貌影响较大;在750℃下保温2h得到的掺杂5at%Se的NbS_1.9Se_0.1形貌良好。将NbS_2-xSe_x作为液体石蜡油的添加剂的UMT-2摩擦学实验结果表明掺杂后的NbS_2-xSe_x具有优异的摩擦性能,其中掺杂5at%的Se在750℃下保温2h的NbS_1.9Se_0.1摩擦性能最佳,同时对其摩擦机理进行了解释。     

Li[Ni1/3Mn1/3Co1/3]O2掺杂Mo研究

采用高温固相合成法制备了Li[Ni_(1－x)/3Mn_(1－x)/3Co_(1－x)/3Mo_x]O₂ (x＝0, 0.005, 0.01, 0.02). 对它们进行了XRD, SEM, 循环伏安及充放电容量测试, 结果发现, 掺杂x＝0.01 Mo的样品具有较高的嵌锂容量和良好的循环稳定性, 在20 mA/g放电电流密度和2.3～4.6 V的电压范围内具有211.6 mAh/g的首次放电比容量, 循环50周后放电比容量仍能达到185.9 mAh/g, 容量损失为12.1%.     

La1-xCaxFeO3-δ系阴极材料的GNP法合成及电性能研究

采用甘氨酸-硝酸盐(GNP)法合成了LaFeO₃及La_1-xCa_xFeO_3-δ(x=0.1～0.5)系列粉体，用TG-DTA、XRD、TEM、SEM等对产物形成过程及微结构进行了表征。结果表明，所合成的系列样品均形成钙钛矿结构的单相固溶体。在x≤20mol%的Ca含量范围内，产物为正交钙钛矿结构；当x>30mol%时，转变为立方钙钛矿相。相同条件下产物的衍射峰强度、晶胞体积及晶粒尺寸都随Ca含量的增大而减小。采用直流四端子法测量了烧结体在中温(450～800 ℃)区的电导率。掺杂使样品导电能力显著增强，电导率随Ca²⁺掺入量的增大先增大后减小，La_0.6Ca_0.4FeO_3-δ样品的电导率最高。在低温段，各样品的导电行为符合小极化子导电机制，导电活化能为13.67～22.70 kJ·mol^-1。     

(Zn，M)TiO3(M=Co，Ni，Co0.5Ni0.5)固溶体的溶胶-凝胶法合成

通过改进的溶胶-凝胶工艺在低温(800 ℃)下合成了基于钛酸锌(ZnTiO₃)体系的(Zn_1-xCo_x)TiO₃、(Zn_1-xNi_x)TiO₃和[Zn_1-x(Co_0.5Ni_0.5)_x]TiO₃陶瓷固溶体。采用X射线衍射分析(XRD)和差示扫描量热法(DSC)等测量技术对产物进行了物相和热稳定性分析。XRD结果表明，获得单一六方相(Zn_1-xCo_x)TiO₃、(Zn_1-xNi_x)TiO₃和[Zn_1-x(Co_0.5Ni_0.5)_x]TiO₃时各自的固溶稳定区间为0.5 ≤ x ≤ 1.0, 0.9 ≤ x ≤ 1.0和0.8 ≤ x ≤ 1.0。与此同时，热分析结果证实，伴随钛酸锌基陶瓷体系掺杂钴量的增加，其六方相的热稳定性提高，且效果比掺杂镍更加显著。     

功能化ZnxCd1-xS纳米晶的制备及其光学性能的研究

以氯化锌、氯化镉和硫化钠为原料，采用巯基乙醇为表面修饰剂，H₂O/DMF为溶剂，制得未团聚且分散均匀的纳米晶溶液，同时得到表面富含羟基基团不同锌镉组成的复合Zn_xCd_1-xS纳米晶。利用FTIR、EDS、UV-Vis、XRD、荧光光谱(PL)考察了复合纳米晶结构和光学性能的关系，并利用紫外灯摄像技术对Zn_xCd_1-xS纳米晶的光致发光性能进行     

Zn0.4Ni0.6Cr0.5LaxFe1.5－xO4铁氧体纳米粉晶的制备及磁性

用柠檬酸盐前驱物-溶胶凝胶法制备了Zn_0.4Ni_0.6Cr_0.5La_xFe_1.5－xO₄ (x＝0～0.10)纳米粉晶. 用DSC-TG分析了前驱物转变为粉晶的热分解过程, 通过粉末X射线衍射仪(XRD)、透射电子显微镜(TEM)和振动样品磁强计(VSM)等表征了产物的结构、形貌和磁性能. 结果表明, 不同温度和不同的La掺杂量对样品的晶粒尺寸、晶胞参数和形貌均产生了明显的影响, 且通过改变La含量能起到调控样品磁性能的作用.     

BaCe0.8-xNbxGd0.2O3-δ(0≤x≤0.45)的制备及性能研究

采用高温固相反应法制备了质子导体BaCe_0.8-xNb_xGd_0.2O_3-δ(0≤x≤0.45)。结合XRD、SEM、EIS等技术对其物相、微观形貌、稳定性及电导率进行了研究。结果表明,在1 600 ℃烧结5 h制备的质子导体BaCe_0.8-xNb_xGd_0.2O_3-δ(0≤x≤0.45)均能保持主相为斜方晶的钙钛矿结构。Nb的加入可明显提高烧结样品的致密性及在CO₂和水蒸气气氛下的稳定性。在湿润H₂/Ar(0.4%,V/V)气氛中800 ℃下,x=0.1样品的电导率为5.73 mS·cm^-1,电导活化能为0.35 eV,与x=0的样品相当。     

Ba0.4Sr0.6Co1-xFexO3-δ系阴极材料的制备和表征

采用甘氨酸-硝酸盐(GNP)法合成了中温固体氧化物燃料电池阴极材料Ba_0.4Sr_0.6Co_1-xFe_xO_3-δ(x=0.0～0.8)系列粉体。利用XRD和SEM对材料的结构和微观形貌进行分析,用直流四端子法测量了烧结陶瓷体在中温(450～800 ℃)范围内的电导率。结果表明,制备的样品为单一钙钛矿相,随着Fe含量增加,XRD衍射峰值向高角度方向稍有偏移。电导率随着温度及Fe含量的变化出现极大值,在x＜0.2时,Ba_0.4Sr_0.6Co_1-xFe_xO_3-δ系列烧结体在中温(450～800 ℃)区的电导率,随Fe掺入量的增大而增大,x=0.2样品的电导率最高,800 ℃时达244.7 S·cm^-1,远超过文献报道值,进一步增大Fe含量导电性能变差。     

Solvent extraction separation of In/III/-Tl/III/ and Hg/II/-Cd/II/-Co/II/ with sulphoxides

Solvent extraction studies have been made on some metals: In/III/-Tl/III/ and Hg/II/-Cd/II/-Co/II/, from ammonium thiocyanate solutions by dialkyl sulphoxides. Separation of these metals from one another can be achieved by suitable choice of the extracted conditions. The nature of the extractable metal species has been elucidated.     

Synthesis of chlorobis/β-diketonato/oxotechnetium/V/ and tris/β-diketonato/technetium/III/ complexes

Chlorobis/-diketonato/ oxotechnetium/V/ complexes [TcOCl/-dik/₂, -diketone=acetylacetone, benzoylacetone and dibenzoylmethane] were newly synthesized using macroamount of⁹⁹Tc. These complexes were further separated into geometrical isomers. Furthermore, an improvement of the yields for the syntheses of tris/-dike-tonato/technetium/III/ complexes [Tc/-dik/₃, -diketone=acetylacetone, benzoylacetone and 2-thenoyltrifluoroacetone] was examined using Tc/III/-thiourea complexes as a starting material.     

Crystal structure of Na3PO4 · 12H2O

The crystal structure of trisodium monophosphate hemihydrate was determined. The space group is $\text{C2}\text{c}$ and a unit cell contains eight formula units. The unit cell dimensions of $\text{Na}{}_3\text{PO}{}_4\text{·}\text{1}\text{2}\text{H}{}_2\text{O}$ are a = 9.631(3), b = 5.416(2), c = 16.938(8) Å, β = 102.60(5)°. The final R value is 0.027 for a set of 1430 independent reflections. This atomic arrangement is mainly a three-dimensional network of distorted NaO₆ octahedra. The hydrogen bonding scheme is given.     

Simultaneous propane dehydrogenation andco2hydrogenation overCrOx/SiO2catalyst

Summary Single reverse water-gas shift (RWGS) and dehydrogenation of propane with CO₂(DH-CO₂) reactions in the presence and absence of the CrO_x/SiO₂ catalyst have been studied between 673 and 873 K. It was found that the CrO_x/SiO₂ catalyst is active both in the dehydrogenation of propane and in the RWGS reactions. The obtained results suggest that the dehydrogenation of propane to propene in the presence of CO₂on CrO_x/SiO₂can be facilitated by the RWGS reaction.</o:p>     

An investigation of the promotional effect of propylene or propane traces on the activity of sulfatedPt/g-Al2O3andPt-Sn/g-Al2O3inCH4combustion

Summary A strong promoting effect of the presence of C₃H₈or C₃H₆was determined for the combustion of CH₄in excess oxygen, over pre-sulfated 1%Pt/g-Al₂O₃and pre-sulfated 1%Pt-2%Sn/g-Al₂O₃catalysts.</o:p>     

Direct synthesis of dimethyl carbonate ?from CH3OH AND CO2 by H3PW12O40/CexTi1-xO2 catalyst

Summary Ce_xTi_1-xO₂ and H₃PW₁₂O₄₀/Ce_xTi_1-xO₂ catalysts were prepared using a sol-gel method, and applied to the direct synthesis of dimethyl carbonate from methanol and carbon dioxide. H₃PW₁₂O₄₀/Ce_xTi_1-xO₂ showed a better catalytic performance than the corresponding Ce_xTi_1-xO₂, due to the bifunctional catalysis of Br?nsted acid sites (provided by H₃PW₁₂O₄₀) and base sites (provided by Ce_xTi_1-xO₂). H₃PW₁₂O₄₀/Ce_0.1Ti_0.9O₂ showed the highest catalytic performance among the H₃PW₁₂O₄₀/Ce_xTi_1-xO₂ catalysts.     

Oxygen defect K2NiF4-type oxides: The compounds La2−xSrxCuO4−x2+δ

Oxygen defect K₂NiF₄-type oxides $\text{La}{}_{\mathrm{2?x}}\text{Sr}{}_{\mathrm{x}}\text{CuO}{}_{\mathrm{<mtext>4?</mtext><mtext>x</mtext><mtext>2</mtext><mtext>+\delta </mtext>}}$ have been synthesized for a wide composition range: 0 ≤ x ≤ 1.34. From the X-ray and electron diffraction study three domains have been characterized: orthorhombic compounds with La₂CuO₄ structure for 0 ≤ x < 0.10, tetragonal oxides similar to LaSrCuO₄ for 0.10 ≤ x < 1 and several superstructures derived from the tetragonal cell ( with n = 3, 4, 4.5, 5, 6) for 1 ≤ x ≤ 1.34. The compounds corresponding to 0 < x < 1 differ from the other oxides in that they are characterized by the presence of copper with two oxidation states: + 2 and + 3. A model structure for La_0.8Sr_1.2CuλO_3.4, in which copper has only the + 2 oxidation state, and for which the actual cell is tegragonal—a = 18.80₄ Å and c = 12.94 Å—has been established. The particular structural evolution of these compounds is discussed in terms of a competition between the capability of Cu(II) to be oxidized to Cu(III) and the ordering of oxygen vacancies.     

A study of the spinel materials LiTi2O4 and Li43Ti53O4 by photoelectron spectroscopy

HeI-excited valence-band ultraviolet photoelectron spectra and MgKα-excited Ti-2p X-ray photoelectron spectra are reported for the spinel materials LiTi₂O₄ and $\text{Li}{}_{\mathrm{<mtext>4</mtext><mtext>3</mtext>}}\text{Ti}{}_{\mathrm{<mtext>5</mtext><mtext>3</mtext>}}\text{O}{}_4$. The presence of a Fermi edge in the ultraviolet photoelectron spectrum of LiTi₂O₄ confirms the metallic nature of this material, although the measured density of states at the Fermi energy is much lower than that expected from an independent-electron interpretation of the magnetic susceptibility. This difference is attributed to a strong interaction of the conduction electrons with the lattice vibrations. The localization of conduction electrons that occurs in the final state in the Ti-2p X-ray photoelectron spectrum of LiTi₂O₄ is attributed to a Coulomb interaction with a core hole.     

LixNi0.8-yCo0.2ZnyOp的合成及电化学性能研究

A series of single-phase Li_xNi_0.8-yCo_0.2Zn_yO_p(0.96 ≤x≤ 1.10， 0 ≤y≤ 0.05， 2 ≤p≤ 2(1+y) ) (different in the y values) were synthesized by a two-step solid state reaction method， in which LiOH·H₂O， Zn-doped spherical Ni(OH)₂ and Co₂O₃ were used as the precursors. The ICP-AES analyses proved that the Zn-doped compounds synthesized had the nonstoichiometric form. The results of the XRD， SEM identified that the uniform particles of the as-prepared materials having a good layered structure were fine， narrowly distributed and well crystallized. The electrochemical performance test was carried out and the results showed that the as-prepared Zn-doped materials had not only a high capacity， but also a better cycling stability characterization than the un-doped one. The Li_1.06Ni_0.75Co_0.22Zn_0.03O_2.03 material has an initial reversible capacity as high as 160.5mAh·g^-1; and a first discharge efficiency 89.2%， and exhibits satisfactory cyclic stability with 90% retainable capacity after 50 cycles.     

Visible light-sensitive yellow TiO2−xNx and Fe-N co-doped Ti1−yFeyO2−xNx anatase photocatalysts

Nitrogen substituted yellow colored anatase TiO_2−xN_x and Fe-N co-doped Ti_1−yFe_yO_2−xN_x have been easily synthesized by novel hydrazine method. White anatase TiO_2−δ and N/Fe-N-doped samples are semiconducting and the presence of ESR signals at g ∼1.994-2.0025 supports the oxygen vacancy and g∼4.3 indicates Fe³⁺ in the lattice. TiO_2−xN_x has higher conductivity than TiO_2−x and Fe/Fe-N-doped anatase and the UV absorption edge of white TiO_2−x extends in the visible region in N, Fe and Fe-N co-doped TiO₂, which show, respectively, two band gaps at ∼3.25/2.63, ∼3.31/2.44 and 2.8/2.44 eV. An activation energy of ∼1.8 eV is observed in Arrhenius log resistivity vs. 1/T plots for all samples. All TiO₂ and Fe-doped TiO₂ show low 2-propanol photodegradation activity but have significant NO photodestruction capability, both in UV and visible regions, while standard Degussa P-25 is incapable in destroying NO in the visible region The mid-gap levels that these N and Fe-N-doped TiO₂ consist may cause this discrepancy in their photocatalytic activities.