果品总酸度的测定

以苹果为实验材料,采用水浴浸提法和超声波辅助提取法提取果酸,通过正交实验优化果酸的提取工艺,并用酸碱滴定法测定总酸度。实验结果表明：水浴浸提法的最佳提取条件为：温度80℃,时间90 min,苹果质量15 g,果酸含量为4.476 3 g/kg;超声波辅助提取法的最佳提取条件为：温度70℃,时间30 min,苹果质量15 g,果酸含量为4.791 8 g/kg。     

微波场协同提取金银花黄色素的研究

研究了应用微波技术从金银花(Lonicera japonicaThunb)中提取黄色素的新工艺,并确定了最佳工艺条件:提取剂为无水乙醇,原料用量(g)与提取剂用量(mL)比为1∶60,提取时间为50 s,微波功率为560 W,提取次数为3次。最佳工艺条件下的色素提取率为83.40%,产品pH值为6。与溶剂浸提法相比,微波法提取金银花黄色素的每次提取时间由1 h减少到50 s,提取率从52.21%增加到83.40%,效果明显优于常规的溶剂浸提法。     

微波场协同提取红龙果食用红色素的研究

研究了应用微波从红龙果（Hylocereus Costaricensis or Weber Britt）中提取食用红色素的新工艺，并确定了最佳工艺条件：提取剂为50％的乙醇溶液，原料用量（g）与提取剂用量（mL）比为1：90。微波功率为700W，提取时间为20s，提取次数为4次。最佳工艺条件下的色素提取率为98．94％，产品pH值为6。与溶剂浸提法相比，微波法提取红龙果食用红色素的每次提取时间由2h减少到20s，提取率从90．96％增加到98．94％。     

微波场协同提取紫背天葵色素的研究

研究了微波提取紫背天葵(Begonia fimbristipula Hance)色素的新工艺,并确定了最佳工艺条件：提取剂为φ(C2H5OH)=60％的乙醇,提取剂与原料用量比为1：60,微波功率为648W,提取时间为200s,提取次数为2次。最佳工艺条件下的色素提取率为96．8％,产率为9．98％,色价E(1％,526m)为10．5,产品pH值为6．5。与溶剂浸提法相比,微波法提取紫背天葵色素的每次提取时间由24h减少到200s,提取率从95．9％增加到96．8％。     

微波场协同提取野菊花黄色素的研究

研究了微波提取野菊花 (Chrysanthemumindicum)黄色素的新工艺并确定了最佳工艺条件 :原料为 2 0 0 0 0g野菊干花 ,提取剂为无水乙醇 ,提取剂比例为 1 /70 ,微波功率为 80 0W ,提取时间为 45 0s,提取次数为 3次 ,最佳工艺条件下色素的提取率为 91 1 % ,产率为 1 4 6% ,色价E ( 1 % ,3 2 1nm)为 42 2 ,产品pH值为 6 5。与溶剂浸提法相比 ,微波提取野菊花黄色素的每次提取时间由 1 2h减小为 45 0s,提取率从 88 6%增加到 91 1 %。     

二氢槲皮素的提取及抗氧化性研究

采用浸提法,分别用水、丙酮-水作为提取溶剂从落叶松中提取二氢槲皮素,通过L9(34)正交实验优化最佳提取条件;研究不同油脂中二氢槲皮素的抗氧化效果;比较Vc、BHT、EDTA、柠檬酸对二氢槲皮素的抗氧化协同作用.结果表明,以水作为溶剂的最佳提取条件为:提取温度90 ℃、料液比1:12(g/mL)、提取时间120 min...     

厚朴抗鼻炎提取物的工艺优化及其活性评价

本论文以金黄色葡萄球菌和大肠埃希氏菌为受试菌,筛选厚朴抗鼻炎提取物的最佳提取方法,并用单因素法优化提取工艺。研究表明,在厚朴抗鼻炎提取物的提取率和活性方面,醇提法较明显地优于碱提法。乙醇浓度为70%、提取温度50℃、提取时间3 h和料液比为1:20为乙醇提取法的最佳提取工艺参数。该工艺稳定可行。     

毛木耳黑色素的提取工艺及理化性质研究

本文采用氢氧化钠浸提法对毛木耳中的黑色素进行提取.以黑色素得率为指标,设置浸提液浓度、料液比和浸提时间3个条件,通过单因素实验和正交实验优化毛木耳黑色素的提取工艺.使用紫外分光光度计和傅里叶红外光谱仪,结合化学试剂法对毛木耳黑色素的结构进行表征,并研究毛木耳黑色素的热稳定性、光稳定性和抗氧化性.结果表明,毛木耳黑色素的最佳提取条件为浸提液氢氧化钠溶液浓度1.5mol·L~(-1),料液比1∶30g·mL~(-1),浸提时间1h.表征结果显示毛木耳黑色素为邻苯二酚结构,是碱溶性物质,不溶于酸溶液与有机溶剂,且热稳定性高于光稳定性.DPPH自由基清除率研究表明,IC_(50)为0.46g·L~(-1),清除率在60%以上.本文研究结果对毛木耳黑色素的高效生产具有一定的促进与指导作用,表明毛木耳具有开发成新型黑色素原材料和抗氧化剂的潜力.     

黄芪多糖提取分离纯化工艺的优化研究

采用温浸法设计四因素三水平正交试验,对黄芪多糖最佳提取工艺进行了优化,结果表明:四因素对黄芪多糖提取的影响顺序为提取温度>提取次数>料液比>提取时间,提取最佳工艺为:料液比1∶6,提取时间90 min,提取温度100℃时提取3次;采用乙醇沉淀法设计三因素三水平正交实验对其最佳分离工艺进行研究,研究发现:三因素三水平对黄芪多糖分离影响顺序为乙醇浓度>乙醇加入量>沉淀时间,分离的最佳工艺为乙醇浓度为90%,加入量5倍体积,沉淀时间4 h;选用AB-8大孔吸附树脂和聚酰胺为吸附剂,不同浓度乙醇为洗脱剂对黄芪多糖最佳纯化工艺进行了探索,确定了最佳纯化工艺为:AB-8大孔吸附树脂吸附,30%乙醇洗脱.这些条件的确定为黄芪的大规模开发和应用奠定了基础.     

微波辅助法提取香根净油的研究

采用微波辅助法提取香根净油,通过实验确定了最佳提取工艺条件。研究结果表明,最佳提取工艺条件为：提取液中乙醇体积分数为80%,固液比1∶10（g/mL）,微波频率2450MHz,功率1190W,微波时间5min。最佳提取工艺条件下香根净油提取率为6.41%。     

一种新型表面增强拉曼活性基底的制备方法

表面增强拉曼光谱技术 (SERS)具有极高的灵敏度 ,对某些分子其灵敏度比常规拉曼光谱高一百万倍 ,能检测吸附在金属表面的单分子层和亚单分子层的分子 ,并提供丰富的分子结构信息 [1～ 5] .活性基底的制备是获得 SERS信号的前提 ,电化学粗糙化的电极、贵金属溶胶及真空蒸镀的金属岛膜是SERS分析中最常用的 3种活性基底 ,在实际应用中各有利弊 .本文报道一种新的制备银纳米粒子基底的方法 ,可使银纳米粒子生长到合适的尺寸 ,以达到最佳SERS增强效果 .利用紫外 -可见光谱和 AFM研究该 SERS基底纳米粒子的尺寸分布和形貌 ,以 1 ,4-(双…     

Quantitative analysis of morphine in dried blood spots by using morphine-d3 pre-impregnated dried blood spot cards

Two different internal standard dried blood spot (DBS) pre-impregnation procedures (prior to blood spotting) were investigated. In the first procedure DBS pre-impregnation is performed by immersing the DBS card fully into an internal standard solution. In the second procedure pre-impregnation is performed by pipetting a certain volume of an internal standard solution onto the DBS card. Morphine-d3 was used as the model compound for all experiments. The pre-impregnation procedure by immersing was further investigated with respect to homogeneity of impregnation, influence of different blood spotting techniques and the influence of spotting different blood volumes on the internal standard distribution, calibration and stability of pre-impregnated cards. Finally, the immersing procedure was used for the analysis of morphine in dried blood spots and the results were compared to the conventional procedure in which the internal standard morphine-d3 was added to the extraction solvent. The new pre-impregnated cards couple simplicity of operation and convenient use in the field to results equivalent to the conventional procedure.     

CuZnMgAl水滑石衍生金属氧化物对废水中Pb(Ⅱ)的吸附

采用共沉淀法合成了不同物质的量之比的CuZnMgAl水滑石(CuZnMgAl-HT),采用X射线衍射仪和热分析仪分析了其晶体结构和热稳定性;将CuZnMgAl-HT的焙烧产物作为吸附剂,测定了其对废水中Pb(Ⅱ)的吸附性能.结果表明,最佳吸附条件为温度30℃,pH 6.0,初始浓度80mg/L,水滑石前体Cu、Zn、Mg、Al的金属物质的量之比为1∶1∶4∶2,吸附时间40min时,相应的吸附率可达95.23%.     

Determination of Copper in the Presence of Various Amounts of Arsenic with L‐Cysteine Modified Gold Electrodes

An L ‐cysteine modified gold electrode for the determination of copper in the presence of various amounts of arsenic with anodic stripping voltammetry has been studied. The electrode was fabricated by immersing a gold electrode in an ethanol solution of 5mM L ‐cysteine for 60 min. Various parameters, such as the effect of different supporting electrolytes, the pH of the electrolyte and the deposition potential were investigated. Under optimum conditions, copper was accumulated at ?0.3 V (vs. SEC) for 60 s in 0.1 M phosphate buffer pH 5.0 in the presence of different amounts of arsenic. Essentially the same sensitivities (0.33±0.001 μA/μM) and limits of detection (0.13±0.002 μM) of copper were obtained with various amount of arsenic in the range 2 μM to 20 μM.     

次氮基三丙酸与铍离子螯合作用的研究

采用分光光度法研究了次氮基三丙酸(3,3',3'-Nitrilotripropionic Acid,NTP)与稀有金属铍元素之间的螯合作用,并测定了NTP在不同时间,pH值,Be2+浓度等条件下对Be2+的螯合性能。研究发现在室温25℃,pH=6.0条件下,NTP对Be2+的螯合在较短的时间内完成,2h左右达到最大,NTP对Be2+螯合物的摩尔比为1∶1,条件稳定常数lgK为4.35。螯合反应时pH值对NTP与Be2+螯合量有着重要的影响。当螯合反应显弱酸性时,NTP对Be2+的螯合较为稳定。     

超声波提取含羞草种子中总黄酮工艺条件优化研究

采用超声提取法对含羞草种子中黄酮类物质进行提取,对提取工艺条件如溶剂、配料比、浸泡时间、提取温度、提取时间进行了优化。在单试验的基础上进行正交试验,得出黄酮类物质的最佳提取工艺条件:乙醇体积分数为60%,含羞草种子与60%乙醇配料比(g∶m L)为1∶8,超声温度范围40~44℃,超声时间为50 min。该方法操作简单,提取时间短,提取效率较高。     

Glucose biosensors based on Ag nanoparticles modified TiO2 nanotube arrays

A GOx/Ag/TiO₂ glucose biosensor was achieved by photoreducing Ag nanoparticles on TiO₂ nanotube arrays (NTAs) following with adsorption of GOx. The morphology, structure, and element component of Ag/TiO₂ NTAs were characterized by scanning electron microscope, transmission electron microscope, and X-ray diffraction. Ag nanoparticles were uniformly deposited on surface of TiO₂ NTAs with average size of 15 nm and the size and distribution changed with the immersing time of TiO₂ NTAs in AgNO₃ aqueous solution. Electrochemical properties of Ag/TiO₂ NTAs were characterized by cyclic voltammetry and amperometric detection of H₂O₂, revealing that TiO₂ NTAs with immersing time of 30 min achieve the best electrochemical activity. The GOx/Ag/TiO₂ NTAs biosensor with optimum conditions achieves a sensitivity of 0.39μA mM^?1 cm^?2 with liner range from 0.1 to 4 mM.     

Facile preparation of superhydrophilic and underwater superoleophobic mesh for oil/water separation in harsh environments

An effective solution to separate oil and water is urgently needed owing to the increasingly serious problem of oil pollution. Numerous studies have been done to endow ordinary materials with extreme wettability for oil/water separation. Unfortunately, most of these materials cannot work in harsh environments, resulting in the low stability and practicability in practice. Herein, a facile method was proposed to fabricate superhydrophilic and underwater superoleophobic mesh by immersing ordinary mesh in a mixture of sulfuric acid (H₂SO₄) and chromium trioxide (CrO₃). After immersing for just 1?min, the mesh was endowed with superhydrophilicity (CA?=?0°) and underwater superoleophobicity (hexane CA?=?151°, SA?=?14°). Increasing the immersion time to 3?min, the prepared mesh exhibited better superoleophobicity. A separation device was developed based on the prepared mesh and the separation efficiencies for diverse oil/water mixtures containing acid, alkaline, salt and hot water were above 95%. The device retained a high efficiency after being reused for 20 times and the prepared mesh maintained superoleophobicity after immersing underwater for 72?h and abrasion test of 100 cycles. This oil/water separation method is easy-to-use, inexpensive, power-free and it can be used to separate caustic oil/water mixtures.     

核壳结构聚丙烯酸酯抗冲改性剂的合成及粒径控制

采用预乳化多步种子乳液聚合法合成聚丙烯酸酯类聚合物(ACR)胶乳,实验得出种子乳液用量与聚丙烯酸丁酯粒径之间的关系,实现对胶乳粒子粒径的控制;对反应中影响粒子粒径的因素做了分析,以此确定最佳反应条件为:温度为65℃;乳化剂:十二烷基硫酸钠和聚氧乙烯基醚硫酸钠摩尔比为4/3,乳化剂用量为0.9％,单体固含量30％～37％...     

Modification of carbon ceramic electrode prepared with sol-gel technique by a thin film of chlorogenic acid: application to amperometric detection of NADH

The carbon ceramic electrode prepared with sol-gel technique is modified by a thin film of chlorogenic acid (CGA). By immersing the carbon ceramic electrode in aqueous solution of chlorogenic acid at less than 2 s a thin film of chlorogenic acid adsorbed strongly and irreversibly on the surface of electrode. The cyclic voltammetry of the resulting modified CCE prepared at optimum conditions shows a well-defined stable reversible redox couple due to hydroquinone/quinone system in both acidic and basic solutions. The modified electrode showed excellent electrocatalytic activity toward NADH oxidation and it also showed a high analytical performance for amperometric detection of NADH. The catalytic rate constant of the modified carbon ceramic electrode for the oxidation of NADH is determined by cyclic voltammetry measurement. Under the optimised conditions the calibration curve is linear in the concentration range 1-120 μm. The detection limit (S/N = 3) and sensitivity are 0.2 μM and 25 nA μM⁻¹.The results of six successive measurement-regeneration cycles show relative standard deviations of 2.5% for electrolyte solution containing 1 mM NADH, indicating that the electrode renewal gives a good reproducible and antifouling surface. The advantages of this amperometric detector are: high sensitivity, excellent catalytic activity, short response time t < 2 s, remarkable long-term stability, simplicity of preparation at short time and good reproducibility.