LaAlO3∶0.05Eu3+微晶的水热合成与表征

通过水热反应合成了六角形LaAlO3∶0.05Eu3+微晶样品,采用X射线粉末衍射(XRD)、扫描电子显微镜(SEM)、能量色散X射线(EDX)和荧光光谱(PL)对产物进行表征,讨论了反应温度和NaOH浓度对LaAlO3合成的影响.XRD分析表明,所合成的样品属三方晶系(空间群R3c),对LaAlO3∶0.05Eu3+样品的X射线粉末衍射数据进行Rietveld精修,最终R因子为Rp=6.79%,Rwp=8.96%;其晶胞参数为a=b=0.53636(2)nm,c=1.3101(1)nm.SEM分析表明,LaAlO3∶0.05Eu3+微晶具有六角形形貌,颗粒较均匀,平均尺寸约为4!m.PL分析表明,LaAlO3∶0.05Eu3+微晶的特征发射为Eu3+的5D0→7F1跃迁发射.     

白色荧光粉NaGd（MoO4）2:Dy3+,Eu3+的水热合成及发光性能

采用谷氨酸辅助水热法合成了八面体形NaGd(MoO4)2:Dy3+,Eu3+白色荧光粉.X射线衍射结果表明,合成的样品为四方晶系的NaGd(MoO4)2纯相.扫描电子显微镜照片显示所制备的粒子为八面体形,各边长约为2μm.荧光光谱结果表明,在NaGd(MoO4)2:4%Dy3+,yEu3+(y=0,0.5%,0.6%,0.7%,0.8%,0.9%,1.0%)样品中,随着Eu3+掺入量的增加,Dy3+的发射峰逐渐减弱,而Eu3+的发射峰逐渐增强,说明Dy3+-Eu3+之间存在能量传递.通过色坐标图可知,当Eu3+掺杂量y=0.9%时,荧光粉的色坐标(0.338,0.281)与标准的白光色坐标(0.33,0.33)接近,表明NaGd(MoO4)2:4%Dy3+,0.9%Eu3+是很好的近紫外光激发下的白色荧光粉.     

NaY(WO4)2∶Eu3+/Tb3+/Tm3+白色荧光粉的制备与发光性能

采用溶剂热法合成了一种单一相白色荧光粉NaY(WO4)2∶Eu3+,Tb3+,Tm3+。通过X射线衍射(XRD)、扫描电镜(SEM)、X射线能谱(EDS)及荧光光谱(PL)对制备的系列样品的物相、形貌和荧光性质进行了表征。结果表明:在荧光粉NaY(WO4)2∶x%Eu3+,4%Tb3+,1%Tm3+(x=5,10,15,20)中,随着Eu3+掺入量的增加,发光从绿光区进入白光区。同时观察到Tb3+到Eu3+的有效能量传递。     

NaY(WO4)2:Eu3+/Tb3+/Tm3+白色荧光粉的制备与发光性能

采用溶剂热法合成了一种单一相白色荧光粉NaY(WO4)2:Eu3+,Tb3+,Tm3+.通过X射线衍射(XRD)、扫描电镜(SEM)、X射线能谱(EDS)及荧光光谱(PL)对制备的系列样品的物相、形貌和荧光性质进行了表征.结果表明:在荧光粉NaY(WO4)2:x％Eu3+,4％Tb3+,1％Tm3+(x=5,10,15,20)中,随着Eu3+掺入量的增加,发光从绿光区进入白光区.同时观察到Tb3+到Eu3+的有效能量传递.     

微乳液法合成白光LED NaLu(MO_4)_2:Eu~(3+)/Eu~(3+),Tb~(3+)(M=W,Mo)荧光粉

采用微乳液法制备Na Lu(WO4)2-x(Mo O4)x∶8%Eu3+(x=0,0.5,1.0,1.5,2.0)/y%Eu3+,5%Tb3+(y=1,3,5,7,9)系列荧光粉。通过X射线衍射(XRD)表征,所制样品的X射线衍射峰与标准卡片PDF#27-0729基本吻合,表明所制的样品为白钨矿结构,属于四方晶系。扫描电镜(SEM)显示制备的纳米粒子是梭子状的,粒径大约是110 nm。激发发射光谱显示,在Eu3+离子掺杂物质的量分数为8%时,Na Lu(WO4)(Mo O4)∶Eu3+发光强度最大。Na Lu(WO4)2-x(Mo O4)x∶8%Eu3+(x=0,0.5,1.0,1.5,2.0)荧光粉在nMo/nW比达到1∶1(x=1)时发光强度最大,强烈的红光发射表明该材料可用于白光LED材料。该荧光粉在268、394和466 nm波长光激发下分别发出橙红色、黄色和淡黄色光,可以满足不同光色需要。Na Lu(WO4)(Mo O4)∶y%Eu3+,5%Tb3+(y=1,3,5,7,9)荧光粉,随着y值增大,从绿光区(x=0.278,y=0.514)进入白光区(x=0.356,y=0.373),(x=0.278,y=0.313),同时观察到Tb3+到Eu3+有效能量传递。     

快速合成宽带激发、窄带发射白光LED用Li2CaSiO4∶Eu2+蓝-绿荧光粉

采用微波辅助法合成了蓝-绿色荧光粉Li2CaSiO4∶Eu2+,该荧光粉能很好的与紫外光及蓝光LED匹配。分别采用X射线衍射(XRD)、扫描电镜(SEM)和激发-发射光谱(PLE/PL)对样品进行了表征。X射线衍射数据与标准卡片PDF#27-290很好吻合。扫描电镜测试表明样品粒径在2~5μm。在紫外光和蓝光激发下,Li2CaSiO4∶1%Eu2+发射主峰位于478 nm,对应于Eu2+的t2g→8S7/2电子跃迁,半高峰宽31 nm。样品发光性能与Eu2+掺杂浓度有关,且Eu2+的最佳掺杂浓度为1%。合成的样品色坐标为(0.09,0.24),可作为白光LED用蓝-绿色荧光材料。     

Y2O2S∶Eu3+空心微球的制备与性能

以单分散的碳球为硬模板,采用均匀共沉淀法合成了Y2O2S:Eu3+心微球.通过XRD、SEM、TEM、荧光光谱对其进行表征.X射线衍射测试表明所制备的Y2O2S:Eu3+空心微球为单相,六方晶.扫描电子显微镜(SEM)和透射电子显微镜(TEM)测试表明所制备的Y2O2S:Eu3+空心微球粒径小,分布均匀.激发和发射光谱测试表明Eu3+离子能有效地掺入硫氧化钇基质中,并具有良好的发光性能.     

偏硼酸锶系列发光材料的制备及其发光性能研究

利用液相共沉淀法制备了SrB2O4 4H2O和SrB2O4 4H2O∶Eu3+,利用高温焙烧前驱体法制备了SrB2O4和SrB2O4∶Eu3+发光材料,通过X射线粉晶衍射(XRD)、X射线能谱分析(EDS)和扫描电子显微镜(SEM)等手段对产物进行了表征.通过荧光光谱研究了其发光性质,并考察了反应时间及Eu3+掺杂浓度对发光强度的影响.结果表明,基质SrB2O4 4H2O和SrB2O4在紫外区具有较强的发光性能,SrB2O4 4H2O∶Eu3+和SrB2O4∶Eu3+均在613 nm有最强发射峰.通过调整反应时间和提高掺杂量,可以克服结构水的猝灭作用的影响,大大提高SrB2O4 4H2O∶Eu3+发光性能,且具有更高的红橙比,是一种良好的新型发光基质.     

白光LED用红色荧光粉LixSr1-2xMoO4:Eux3+的制备及发光性质研究

采用高温固相法合成了白光LED用红色荧光材料LixSr1-2xMoO4:Eux3+,对样品分别进行了X射线衍射(XRD)分析、扫描电镜测试(SEM)和荧光光谱的测定.测试结果表明,LixSr1-2xMoO4:Eux3+荧光粉可以被近紫外光(uv)(394 nm)和蓝光(464 nm)有效地激发,且与没有掺杂Li+的荧光粉SrMoO4:Eu3+相比,发光强度得到了明显的增强.同时也讨论Li+和Eu3+的掺杂浓度对发光强度的影响.     

Y2O3∶Eu3+发光薄膜的溶胶-凝胶法制备、表征及图案化

采用Pechini溶胶-凝胶法制备了纳米级Y2O3∶Eu3+发光薄膜, 同时, 通过软石印技术得到了条纹宽度为5～60 μm的Y2O3∶Eu3+图案化发光薄膜. 通过X射线衍射 (XRD)、付里叶变换-红外光谱 (FT-IR)、原子力显微镜(AFM), 光致发光(PL)光谱及寿命等方法对得到的发光薄膜进行了表征. XRD结果表明500 ℃时薄膜开始结晶, 900 ℃已结晶完全, 得到了立方相的产物. 图案化的条纹在烧结的过程中发生了明显的收缩(50%). Y2O3基质向掺杂的稀土离子Eu3+发生了有效的能量传递, 使得Eu3+显示出5D0-7FJ(J=0, 1, 2, 3, 4)特征发射. 寿命和光致发光光谱的研究表明, 发光强度随着温度的升高而增强.     

Phosphine-catalyzed annulations of azomethine imines: allene-dependent [3 + 2], [3 + 3], [4 + 3], and [3 + 2 + 3] pathways

In this paper we describe the phosphine-catalyzed [3 + 2], [3 + 3], [4 + 3], and [3 + 2 + 3] annulations of azomethine imines and allenoates. These processes mark the first use of azomethine imines in nucleophilic phosphine catalysis, producing dinitrogen-fused heterocycles, including tetrahydropyrazolo-pyrazolones, -pyridazinones, -diazepinones, and -diazocinones. Counting the two different reaction modes in the [3 + 3] cyclizations, there are five distinct reaction pathways-the choice of which depends on the structure and chemical properties of the allenoate. All reactions are operationally simple and proceed smoothly under mild reaction conditions, affording a broad range of 1,2-dinitrogen-containing heterocycles in moderate to excellent yields. A zwitterionic intermediate formed from a phosphine and two molecules of ethyl 2,3-butadienoate acted as a 1,5-dipole in the annulations of azomethine imines, leading to the [3 + 2 + 3] tetrahydropyrazolo-diazocinone products. The incorporation of two molecules of an allenoate into an eight-membered-ring product represents a new application of this versatile class of molecules in nucleophilic phosphine catalysis. The salient features of this protocol--the facile access to a diverse range of nitrogen-containing heterocycles and the simple preparation of azomethine imine substrates--suggest that it might find extensive applications in heterocycle synthesis.     

Pseudorotational dynamics of H3+ and Li3+

The origin of the pseudoprecession phenomenon is investigated through a computational study of the time evolution of H₃⁺ and Li₃⁺ by electron nuclear dynamics theory. In particular, the pseudorotation of both molecules is shown to induce a spatial rotation, which in turn leads to Coriolis coupling of the two orthogonal nuclear shape deformation modes. This effect is rooted in an anisotropy of the molecular ground state potential energy surface that is caused by the interaction between the D_3h ground state and a twofold degenerate first excited state. Computations are performed for a variety of vibrational energies. In addition, the impact of the anharmonicity of the ground state potential surface on the shape deformation modes and the coupling between them is discussed. © 2001 John Wiley & Sons, Inc. Int J Quantum Chem, 2001     

Energy transfer between Gd3+ and Sm3+ the effect of Gd3+ on quenching of Sm3+ and intensity parameters of Sm3+ in borate glasses

Intensity parameters of Sm³⁺ in borate glasses were obtained by fitting the oscillator strengths to the Judd-Ofelt formula and a study of energy transfer from gadolinium to samarium was performed. An increase of samarium fluorescence originating from the ${}^4\text{G}{}_{\mathrm{<mtext>5</mtext><mtext>2</mtext>}}$ level was observed in the presence of gadolinium, in the concentration range of 0.1–3 wt% samarium with gadolinium constant at 3 wt%. The intensity of samarium fluorescence on excitation at 273 nm increased by one order of magnitude in the presence of gadolinium. From the excitation spectrum of the double-doped glasses (Gd + Sm), it was deduced that energy absorbed by gadolinium is transferred from ${}^6\text{P}{}_{\mathrm{<mtext>7</mtext><mtext>2</mtext>}}$ gadolinium levels to the ${}^4\text{P}{}_{\mathrm{<mtext>3</mtext><mtext>2</mtext>}}$ and ${}^4\text{P}{}_{\mathrm{<mtext>5</mtext><mtext>2</mtext>}}$ samarium levels.The mechanism of this energy transfer was obtained by plotting the energy transfer probabilities as a function of samarium concentration. A linear dependence of $\text{η}{}_0\text{η}$ (η intensity of gadolinium in the presence of samarium) versus square of concentration of Sm + Gd is obtained. From this it is concluded that the transfer is of electric-multipolar type, mainly dipole-dipole. A small increase (about 10%) of fluorescence of samarium in the presence of gadolinium excited at levels where no energy transfer can take place is attributed to the fact that the quenching of samarium occurring by the cross relaxation $\text{(}{}^4\text{G}{}_{\mathrm{<mtext>5</mtext><mtext>2</mtext>}}\text{→}{}^6\text{F}{}_{\mathrm{<mtext>9</mtext><mtext>2</mtext>}}\text{) (}{}^6\text{H}{}_{\mathrm{<mtext>5</mtext><mtext>2</mtext>}}\text{→}{}^6\text{F}{}_{\mathrm{<mtext>9</mtext><mtext>2</mtext>}}\text{)}$ is suppressed by the presence of gadolinium as seen from concentration dependence of samarium doped glasses compared to double-doped glasses.     

Spectroscopic properties of Er3+, Yb3 + and Er3 + /Yb3+ doped metaphosphate glasses

The absorption and emission spectroscopies of Er3+ doped and Er3+/Yb3+ codoped Ca(PO3)2, Sr(PO3)2 and Ba(PO3)2 glasses have been studied. From the Judd-Ofelt intensity parameters, the spontaneous emission probabilities of some relevant transitions and the radiative lifetimes of several excited states of Er3+ have been calculated. The decay curves of the Er3+ emission at 1.5 microm have been measured at different temperatures. The data have been fitted using a stretched exponential function and the obtained experimental lifetimes have been compared with the calculated radiative lifetimes. The difference between the experimental and calculated lifetimes is attributed to the presence of traces of OH groups in the host glasses. The absolute OH content in some glasses has been determined from the infrared spectra. The emission spectra at 1.5 microm of the Er3+ ion in the codoped glasses have been measured at different temperatures. The integrated emission intensities decrease significantly on passing from room temperature to 13 K, suggesting a temperature dependence of the rate of the energy transfer process between Yb3+ and Er3+.     

Bi3+-Er3+ and Bi3+-Yb3+ Codoped Cs2AgInCl6 Double Perovskite Near-Infrared Emitters

Bi³⁺ and lanthanide ions have been codoped in metal oxides as optical sensitizers and emitters. But such codoping is not known in typical semiconductors such as Si, GaAs, and CdSe. Metal halide perovskite with coordination number 6 provides an opportunity to codope Bi³⁺ and lanthanide ions. Codoping of Bi³⁺ and Ln³⁺ (Ln=Er and Yb) in Cs₂AgInCl₆ double perovskite is presented. Bi³⁺-Er³⁺ codoped Cs₂AgInCl₆ shows Er³⁺ f-electron emission at 1540 nm (suitable for low-loss optical communication). Bi³⁺ codoping decreases the excitation (absorption) energy, such that the samples can be excited with ca. 370 nm light. At that excitation, Bi³⁺-Er³⁺ codoped Cs₂AgInCl₆ shows ca. 45 times higher emission intensity compared to the Er³⁺ doped Cs₂AgInCl₆. Similar results are also observed in Bi³⁺-Yb³⁺ codoped sample emitting at 994 nm. A combination of temperature-dependent (5.7 K to 423 K) photoluminescence and calculations is used to understand the optical sensitization and emission processes.     

Strong visible up-conversion emission in Tb3+, Tm3+ and Tb3+-Tm3+ co-doped tellurite glasses sensitized by Yb3+

Up-conversion luminescence characteristics under 975 nm excitation have been investigated with Tb3+/Tm3+/Yb3+ triply doped tellurite glasses. Here, green (547 nm: (5)D(4)-->(7)F(4)) and red (660 nm: (5)D(4)-->(7)F(2)) up-conversion (UC) luminescence originating from Tb3+ is observed strongly, because of the quadratic dependences of emission intensities on the excitation power. Especially, the UC luminescence was intensified violently with the energy transfer from the Tm3+ ions involves in the Tb3+ excitation. To the Tb3+/Tm3+/Yb3+ triply doped glass system, a novel up-conversion mechanism is proposed as follows: the energy of (3)G(4) level (Tm3+) was transferred to (5)D(4) (Tb(3+)) and the 477-nm UC luminescence of Tm3+ was nearly quenched.     

Tb~(3+)在YAG中的发光及Tb~(3+)与Tm~(3 +)间的能量传递

采用溶胶 -凝胶方法合成了系列化合物 (Y1 -x- yTbxTmy) 3Al5O1 2 ,研究了Tb3+在该化合物中的发光及其浓度对发光性质的影响 ,以及Tb3+与Tm3+间的能量传递现象。     

Ca2+、La3+及Eu3+对NaDC胶团的作用

在水溶液中将脱氧胆酸钠（ＮａＤＣ）分别与ＣａＣＬ２、ＥｕＣｌ３及ＬａＣｌ３反应,改变反应物浓度和配比,合成了系列脱氧胆酸络全物。利用红外光谱（ＦＴＩＲ）、元素分析、ＩＣＰ分析及Ｘ身材线粉末衍射谱,对它们的组成和结构进行了研究。结果表明：水溶液中ＣａＣｌ２与ＮａＤＣ的反应不是简单离子间的反应,改变其反应物浓度和配比,生成组成和结构不同的络合物;而ＬｎＣｌ３与ＮａＤＣ反应时,反应物浓度和配比的改变不影     

Quantum yield of Ce3+ and energy transfer between Ce3+ and Tb3+ in borax glasses

Quantum yields of Ce³⁺ in borax glasses were obtained by the comparative method and by lifetime measurements. Energy transfer from Ce³⁺ to Tb³⁺ was detected in borax glasses from the excitation spectrum. The transfer probabilities were calculated from the increase in the Tb³⁺ fluorescence in the presence of Ce³⁺ and the decrease of the Ce³⁺ fluorescence in the presence of Tb³⁺. A linear dependence of the transfer probabilities was found with the squared sum of the concentrations of the donor and acceptor ions. This is consistent with dipolar mechanism and interactions of one Ce³⁺ donor with two Tb³⁺ acceptors, in view of the Fong-Diestler theory.